Hallo, ich habe das Problem, dass Ubuntu das CD bzw. DVD Laufwerk nicht richtig erkennt. Audio-CDs von Alben scheinen zu laden, andere CDs und DVDs im Allgemeinen laden gar nicht und werden auch nicht erkannt bzw. in Nautilus angezeigt. Als ich noch Ubuntu 13.04 benutzt hatte, hatte ich dieses Problem nie! Das Problem tritt erst seit Ubuntu 14.04 auf!
Beim Aufrufen von wodim -checkdrive im Terminal hatte ich zuerst folgenden Fehler:
Device was not specidied. Trying to find an appropriate drive... Detected Drive: /dev/sr0 Using /dev/cdrom of unknown capabilities ... wodim: Cannot load media with this drive! wodim: Try to load media by hand.
Ich habe anschließend in /etc/wodim.conf folgende Zeile hinzugefügt: cdrom= /dev/sr0
Meine wodim.conf:
# wodim.dfl Copyright 2006 E. Bloch # Based on cdrecord.dfl (Copyright 1998 J. Schilling) # # This file is /etc/wodim.conf # It contains defaults that are used if no command line option # or environment is present. # # The default device, if not specified elsewhere. # #CDR_DEVICE=yamaha CDR_DEVICE=cdrom # # The default speed, if not specified elswhere. # # For MMC compliant drives, the default is to write at maximum speed, so it in # general does not make sense to set up a default speed in /etc/wodim.conf. # #CDR_SPEED=40 # # The default FIFO size if, not specified elswhere. # CDR_FIFOSIZE=12m # # CDR_MAXFIFOSIZE can limit the maximum allowed FIFO size. This is useful to # not let mallicious users allocate too much system memory if no ulimit is set # or wodim runs with suid-root permissions. # # CDR_MAXFIFOSIZE=256m # # The following definitions allow abstract device names. They are used if the # device name does not contain the the characters ',', ':', '/' and '@' # # Unless you have a good reason, use speed == -1 and let wodim use its internal # drive specific defaults. # # drive name device speed fifosize driveropts # #default= USCSI:1,0,0 -1 -1 burnfree #sanyo= 1,4,0 -1 -1 burnfree #cdrom= 0,6,0 2 1m "" #remote= REMOTE:rscsi@somehost:1,0,0 16 32m burnfree # #cdrom= /dev/sr0 -1 -1 burnfree #cdrom= -1 -1 -1 burnfree cdrom= /dev/sr0
wodim -devices oder wodim --scanbus gibt den folgenden Fehler aus:
wodim: No such file or directory. Cannot open SCSI driver! For possible targets try 'wodim --devices' or 'wodim -scanbus'. For possible transport specifiers try 'wodim dev=help'. For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from the wodim documentation.
"Cannot open SCSI driver"? Also habe ich scsi-tools installiert, was aber auch nichts gebracht hat. Die Bios Einstellungen habe ich auch zurückgesetzt.
Alles, was ich sonst noch auf Google gefunden habe, hat mich nur noch mehr verwirrt 😀
Ich hoffe, dass ihr mit den Angaben was anfangen könnt und, dass ihr hoffentlich eine Lösung parat habt. Ich habe nämlich zuerst gedacht, dass es sich um ein Hardware Problem handelt, was aber nicht sein kann, da er Audio-CDs noch ganz normal zu laden scheint.
LG
Edit:
wodim dev=/dev/sr0 -scanbus scsibus1: 1,0,0 100) 'PLDS ' 'DVD+-RW DS-8A5SH' 'XD13' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) *
wodin dev=/dev/sr0 -devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sr0' rwrw-- : 'PLDS' 'DVD+-RW DS-8A5SH' -------------------------------------------------------------------------
Edit2: Habe jetzt mal cdrecord installiert, scheint aber auch nichts gebracht zu haben.