Hallo!
Nach Installation eines nvidia treibers und reboot bekomme ich nur noch einen schwarzen screen nach der Passworteingabe.
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 630] [10de:0f00] (rev a1) Subsystem: NVIDIA Corporation Device [10de:098f] Kernel driver in use: nouveau
Da ich nix sehe und sich auch kein Terminal öffnet bin ich LIVE - daher der nouveau - tatsächlich ist der 340.xx installiert.
xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 DVI-I-1 disconnected (normal left inverted right x axis y axis) dithering depth: auto supported: auto, 6 bpc, 8 bpc dithering mode: auto supported: auto, off, static 2x2, dynamic 2x2 scaling mode: Full supported: None, Full, Center, Full aspect color vibrance: 150 range: (0, 200) vibrant hue: 90 range: (0, 180) underscan vborder: 0 range: (0, 128) underscan hborder: 0 range: (0, 128) underscan: off supported: auto, off, on subconnector: Unknown supported: Unknown, DVI-D, DVI-A HDMI-1 disconnected (normal left inverted right x axis y axis) dithering depth: auto supported: auto, 6 bpc, 8 bpc dithering mode: auto supported: auto, off, static 2x2, dynamic 2x2 scaling mode: Full supported: None, Full, Center, Full aspect color vibrance: 150 range: (0, 200) vibrant hue: 90 range: (0, 180) underscan vborder: 0 range: (0, 128) underscan hborder: 0 range: (0, 128) underscan: off supported: auto, off, on VGA-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm EDID: 00ffffffffffff001e6dc15893410400 0516010368331d78eac665a059589d27 0e5054a76b80b30081809500714fa9c0 810081c09040023a801871382d40582c 4500fe221100001e000000fd00384b1e 530f000a202020202020000000fc0045 323334320a20202020202020000000ff 003230354e44435238363933310a0035 scaling mode: None supported: None, Full, Center, Full aspect color vibrance: 150 range: (0, 200) vibrant hue: 90 range: (0, 180) 1920x1080 60.0*+ 1680x1050 60.0 1400x1050 60.0 1600x900 60.0 1280x1024 75.0 60.0 1440x900 59.9 1280x800 59.8 1152x864 75.0 1280x720 60.0 1024x768 75.1 60.0 832x624 74.6 800x600 75.0 60.3 56.2 640x480 75.0 60.0 720x400 70.1
Xorg.0.log:
[ 20.388] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 20.388] X Protocol Version 11, Revision 0 [ 20.388] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 20.388] Current Operating System: Linux anonymous 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 [ 20.388] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=0e867459-e5a5-4e1e-a398-cfde58b4c4e6 ro quiet splash [ 20.388] Build Date: 16 April 2014 01:36:29PM [ 20.388] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 20.388] Current version of pixman: 0.30.2 [ 20.388] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 20.388] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 20.388] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 23 23:19:50 2014 [ 20.484] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.502] (==) No Layout section. Using the first Screen section. [ 20.502] (==) No screen section available. Using defaults. [ 20.502] (**) |-->Screen "Default Screen Section" (0) [ 20.502] (**) | |-->Monitor "<default monitor>" [ 20.502] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.502] (==) Automatically adding devices [ 20.502] (==) Automatically enabling devices [ 20.502] (==) Automatically adding GPU devices [ 20.502] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.502] Entry deleted from font path. [ 20.502] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 20.502] Entry deleted from font path. [ 20.502] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 20.502] Entry deleted from font path. [ 20.502] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 20.502] Entry deleted from font path. [ 20.502] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 20.502] Entry deleted from font path. [ 20.502] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 20.502] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 20.502] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.503] (II) Loader magic: 0x7f4f27ea4d60 [ 20.503] (II) Module ABI versions: [ 20.503] X.Org ANSI C Emulation: 0.4 [ 20.503] X.Org Video Driver: 15.0 [ 20.503] X.Org XInput driver : 20.0 [ 20.503] X.Org Server Extension : 8.0 [ 20.503] (II) xfree86: Adding drm device (/dev/dri/card0) [ 20.504] (--) PCI:*(0:1:0:0) 10de:0f00:10de:098f rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 20.504] Initializing built-in extension Generic Event Extension [ 20.504] Initializing built-in extension SHAPE [ 20.504] Initializing built-in extension MIT-SHM [ 20.504] Initializing built-in extension XInputExtension [ 20.504] Initializing built-in extension XTEST [ 20.504] Initializing built-in extension BIG-REQUESTS [ 20.504] Initializing built-in extension SYNC [ 20.504] Initializing built-in extension XKEYBOARD [ 20.504] Initializing built-in extension XC-MISC [ 20.504] Initializing built-in extension SECURITY [ 20.504] Initializing built-in extension XINERAMA [ 20.504] Initializing built-in extension XFIXES [ 20.504] Initializing built-in extension RENDER [ 20.504] Initializing built-in extension RANDR [ 20.504] Initializing built-in extension COMPOSITE [ 20.504] Initializing built-in extension DAMAGE [ 20.504] Initializing built-in extension MIT-SCREEN-SAVER [ 20.504] Initializing built-in extension DOUBLE-BUFFER [ 20.504] Initializing built-in extension RECORD [ 20.504] Initializing built-in extension DPMS [ 20.504] Initializing built-in extension Present [ 20.504] Initializing built-in extension DRI3 [ 20.504] Initializing built-in extension X-Resource [ 20.504] Initializing built-in extension XVideo [ 20.504] Initializing built-in extension XVideo-MotionCompensation [ 20.504] Initializing built-in extension SELinux [ 20.504] Initializing built-in extension XFree86-VidModeExtension [ 20.504] Initializing built-in extension XFree86-DGA [ 20.504] Initializing built-in extension XFree86-DRI [ 20.504] Initializing built-in extension DRI2 [ 20.504] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere. [ 20.504] (II) "glx" will be loaded by default. [ 20.504] (WW) "xmir" is not to be loaded by default. Skipping. [ 20.504] (II) LoadModule: "glx" [ 20.504] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 20.520] (II) Module glx: vendor="NVIDIA Corporation" [ 20.520] compiled for 4.0.2, module version = 1.0.0 [ 20.520] Module class: X.Org Server Extension [ 20.520] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014 [ 20.520] Loading extension GLX [ 20.520] (==) Matched nvidia as autoconfigured driver 0 [ 20.520] (==) Matched nouveau as autoconfigured driver 1 [ 20.520] (==) Matched nvidia as autoconfigured driver 2 [ 20.520] (==) Matched nouveau as autoconfigured driver 3 [ 20.520] (==) Matched modesetting as autoconfigured driver 4 [ 20.520] (==) Matched fbdev as autoconfigured driver 5 [ 20.520] (==) Matched vesa as autoconfigured driver 6 [ 20.520] (==) Assigned the driver to the xf86ConfigLayout [ 20.520] (II) LoadModule: "nvidia" [ 20.520] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 20.521] (II) Module nvidia: vendor="NVIDIA Corporation" [ 20.521] compiled for 4.0.2, module version = 1.0.0 [ 20.521] Module class: X.Org Video Driver [ 20.521] (II) LoadModule: "nouveau" [ 20.608] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 20.665] (II) Module nouveau: vendor="X.Org Foundation" [ 20.665] compiled for 1.15.1, module version = 1.0.10 [ 20.666] Module class: X.Org Video Driver [ 20.666] ABI class: X.Org Video Driver, version 15.0 [ 20.666] (II) LoadModule: "modesetting" [ 20.666] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.666] (II) Module modesetting: vendor="X.Org Foundation" [ 20.666] compiled for 1.15.0, module version = 0.8.1 [ 20.666] Module class: X.Org Video Driver [ 20.666] ABI class: X.Org Video Driver, version 15.0 [ 20.666] (II) LoadModule: "fbdev" [ 20.666] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.666] (II) Module fbdev: vendor="X.Org Foundation" [ 20.666] compiled for 1.15.0, module version = 0.4.4 [ 20.666] Module class: X.Org Video Driver [ 20.666] ABI class: X.Org Video Driver, version 15.0 [ 20.666] (II) LoadModule: "vesa" [ 20.666] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.666] (II) Module vesa: vendor="X.Org Foundation" [ 20.666] compiled for 1.15.0, module version = 2.3.3 [ 20.666] Module class: X.Org Video Driver [ 20.666] ABI class: X.Org Video Driver, version 15.0 [ 20.666] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014 [ 20.666] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 20.666] (II) NOUVEAU driver [ 20.666] (II) NOUVEAU driver for NVIDIA chipset families : [ 20.666] RIVA TNT (NV04) [ 20.666] RIVA TNT2 (NV05) [ 20.666] GeForce 256 (NV10) [ 20.666] GeForce 2 (NV11, NV15) [ 20.666] GeForce 4MX (NV17, NV18) [ 20.667] GeForce 3 (NV20) [ 20.667] GeForce 4Ti (NV25, NV28) [ 20.667] GeForce FX (NV3x) [ 20.667] GeForce 6 (NV4x) [ 20.667] GeForce 7 (G7x) [ 20.667] GeForce 8 (G8x) [ 20.667] GeForce GTX 200 (NVA0) [ 20.667] GeForce GTX 400 (NVC0) [ 20.667] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 20.667] (II) FBDEV: driver for framebuffer: fbdev [ 20.667] (II) VESA: driver for VESA chipsets: vesa [ 20.667] (++) using VT number 7 [ 20.668] (II) Loading sub module "fb" [ 20.668] (II) LoadModule: "fb" [ 20.693] (II) Loading /usr/lib/xorg/modules/libfb.so [ 20.693] (II) Module fb: vendor="X.Org Foundation" [ 20.693] compiled for 1.15.1, module version = 1.0.0 [ 20.693] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.693] (WW) Unresolved symbol: fbGetGCPrivateKey [ 20.693] (II) Loading sub module "wfb" [ 20.693] (II) LoadModule: "wfb" [ 20.693] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 20.693] (II) Module wfb: vendor="X.Org Foundation" [ 20.693] compiled for 1.15.1, module version = 1.0.0 [ 20.693] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.693] (II) Loading sub module "ramdac" [ 20.693] (II) LoadModule: "ramdac" [ 20.693] (II) Module "ramdac" already built-in [ 20.694] (WW) Falling back to old probe method for modesetting [ 20.694] (WW) Falling back to old probe method for fbdev [ 20.694] (II) Loading sub module "fbdevhw" [ 20.694] (II) LoadModule: "fbdevhw" [ 20.694] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.694] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.694] compiled for 1.15.1, module version = 0.0.2 [ 20.694] ABI class: X.Org Video Driver, version 15.0 [ 20.694] (EE) open /dev/fb0: No such file or directory [ 20.694] (WW) Falling back to old probe method for vesa [ 20.694] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.694] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 20.694] (==) NVIDIA(0): RGB weight 888 [ 20.694] (==) NVIDIA(0): Default visual is TrueColor [ 20.694] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 20.694] (**) NVIDIA(0): Enabling 2D acceleration [ 21.229] (II) NVIDIA(0): Display (LG Electronics E2342 (CRT-1)) does not support NVIDIA [ 21.229] (II) NVIDIA(0): 3D Vision stereo. [ 21.229] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102) [ 21.229] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:1:0:0 (GPU-0) [ 21.230] (--) NVIDIA(0): Memory: 4194304 kBytes [ 21.230] (--) NVIDIA(0): VideoBIOS: 70.08.ad.00.01 [ 21.230] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 21.231] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:1:0:0 [ 21.231] (--) NVIDIA(0): CRT-0 [ 21.231] (--) NVIDIA(0): LG Electronics E2342 (CRT-1) (boot, connected) [ 21.231] (--) NVIDIA(0): DFP-0 [ 21.231] (--) NVIDIA(0): DFP-1 [ 21.231] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock [ 21.231] (--) NVIDIA(GPU-0): LG Electronics E2342 (CRT-1): 400.0 MHz maximum pixel clock [ 21.231] (--) NVIDIA(0): DFP-0: Internal TMDS [ 21.231] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock [ 21.231] (--) NVIDIA(0): DFP-1: Internal TMDS [ 21.231] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock [ 21.231] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 21.231] (**) NVIDIA(0): device LG Electronics E2342 (CRT-1) (Using EDID [ 21.231] (**) NVIDIA(0): frequencies has been enabled on all display devices.) [ 21.232] (==) NVIDIA(0): [ 21.232] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 21.232] (==) NVIDIA(0): will be used as the requested mode. [ 21.232] (==) NVIDIA(0): [ 21.232] (II) NVIDIA(0): Validated MetaModes: [ 21.232] (II) NVIDIA(0): "CRT-1:nvidia-auto-select" [ 21.232] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080 [ 21.268] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config [ 21.268] (--) NVIDIA(0): option [ 21.268] (II) UnloadModule: "nouveau" [ 21.268] (II) Unloading nouveau [ 21.268] (II) UnloadModule: "modesetting" [ 21.268] (II) Unloading modesetting [ 21.268] (II) UnloadModule: "fbdev" [ 21.268] (II) Unloading fbdev [ 21.268] (II) UnloadSubModule: "fbdevhw" [ 21.268] (II) Unloading fbdevhw [ 21.268] (II) UnloadModule: "vesa" [ 21.268] (II) Unloading vesa [ 21.268] (--) Depth 24 pixmap format is 32 bpp [ 21.268] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory [ 21.268] (II) NVIDIA: access. [ 21.271] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select" [ 21.308] Loading extension NV-GLX [ 21.360] (==) NVIDIA(0): Disabling shared memory pixmaps [ 21.360] (==) NVIDIA(0): Backing store enabled [ 21.360] (==) NVIDIA(0): Silken mouse enabled [ 21.360] (==) NVIDIA(0): DPMS enabled [ 21.360] Loading extension NV-CONTROL [ 21.360] Loading extension XINERAMA [ 21.360] (II) Loading sub module "dri2" [ 21.360] (II) LoadModule: "dri2" [ 21.360] (II) Module "dri2" already built-in [ 21.360] (II) NVIDIA(0): [DRI2] Setup complete [ 21.360] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 21.360] (--) RandR disabled [ 21.364] (II) SELinux: Disabled on system [ 21.365] (II) Initializing extension GLX [ 21.375] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 21.378] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 21.378] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 21.378] (II) LoadModule: "evdev" [ 21.378] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.446] (II) Module evdev: vendor="X.Org Foundation" [ 21.446] compiled for 1.15.0, module version = 2.8.2 [ 21.446] Module class: X.Org XInput Driver [ 21.446] ABI class: X.Org XInput driver, version 20.0 [ 21.446] (II) Using input driver 'evdev' for 'Power Button' [ 21.446] (**) Power Button: always reports core events [ 21.446] (**) evdev: Power Button: Device: "/dev/input/event1" [ 21.446] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.446] (--) evdev: Power Button: Found keys [ 21.446] (II) evdev: Power Button: Configuring as keyboard [ 21.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 21.446] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 21.446] (**) Option "xkb_rules" "evdev" [ 21.446] (**) Option "xkb_model" "pc105" [ 21.446] (**) Option "xkb_layout" "de" [ 21.448] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 21.448] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 21.448] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 21.448] (II) Using input driver 'evdev' for 'Power Button' [ 21.448] (**) Power Button: always reports core events [ 21.448] (**) evdev: Power Button: Device: "/dev/input/event0" [ 21.448] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.448] (--) evdev: Power Button: Found keys [ 21.448] (II) evdev: Power Button: Configuring as keyboard [ 21.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 21.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 21.448] (**) Option "xkb_rules" "evdev" [ 21.448] (**) Option "xkb_model" "pc105" [ 21.448] (**) Option "xkb_layout" "de" [ 21.449] (II) config/udev: Adding drm device (/dev/dri/card0) [ 21.449] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 21.449] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17) [ 21.449] (II) No input driver specified, ignoring this device. [ 21.449] (II) This device may have been added with another device file. [ 21.449] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16) [ 21.449] (II) No input driver specified, ignoring this device. [ 21.449] (II) This device may have been added with another device file. [ 21.449] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15) [ 21.449] (II) No input driver specified, ignoring this device. [ 21.449] (II) This device may have been added with another device file. [ 21.449] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14) [ 21.449] (II) No input driver specified, ignoring this device. [ 21.449] (II) This device may have been added with another device file. [ 21.450] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v7.0 (/dev/input/event2) [ 21.450] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: Applying InputClass "evdev keyboard catchall" [ 21.450] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v7.0' [ 21.450] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: always reports core events [ 21.450] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Device: "/dev/input/event2" [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Vendor 0x45e Product 0x745 [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found keys [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Configuring as keyboard [ 21.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/input/input5/event2" [ 21.450] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v7.0" (type: KEYBOARD, id 8) [ 21.450] (**) Option "xkb_rules" "evdev" [ 21.450] (**) Option "xkb_model" "pc105" [ 21.450] (**) Option "xkb_layout" "de" [ 21.450] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v7.0 (/dev/input/event3) [ 21.450] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: Applying InputClass "evdev pointer catchall" [ 21.450] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: Applying InputClass "evdev keyboard catchall" [ 21.450] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v7.0' [ 21.450] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: always reports core events [ 21.450] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Device: "/dev/input/event3" [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Vendor 0x45e Product 0x745 [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found 9 mouse buttons [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found scroll wheel(s) [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found relative axes [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found x and y relative axes [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found absolute axes [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Forcing absolute x/y axes to exist. [ 21.450] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found keys [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Configuring as mouse [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Configuring as keyboard [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Adding scrollwheel support [ 21.450] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: YAxisMapping: buttons 4 and 5 [ 21.450] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/input/input6/event3" [ 21.450] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v7.0" (type: KEYBOARD, id 9) [ 21.450] (**) Option "xkb_rules" "evdev" [ 21.450] (**) Option "xkb_model" "pc105" [ 21.450] (**) Option "xkb_layout" "de" [ 21.450] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: initialized for relative axes. [ 21.451] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes. [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) keeping acceleration scheme 1 [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration profile 0 [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration factor: 2.000 [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration threshold: 4 [ 21.451] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v7.0 (/dev/input/mouse0) [ 21.451] (II) No input driver specified, ignoring this device. [ 21.451] (II) This device may have been added with another device file. [ 21.451] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v7.0 (/dev/input/event4) [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: Applying InputClass "evdev keyboard catchall" [ 21.451] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v7.0' [ 21.451] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: always reports core events [ 21.451] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Device: "/dev/input/event4" [ 21.451] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Using mtdev for this device [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Vendor 0x45e Product 0x745 [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found 1 mouse buttons [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found scroll wheel(s) [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found relative axes [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found absolute axes [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found absolute multitouch axes [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found x and y absolute axes [ 21.451] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Found keys [ 21.451] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Forcing relative x/y axes to exist. [ 21.451] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Configuring as mouse [ 21.451] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Configuring as keyboard [ 21.451] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: Adding scrollwheel support [ 21.451] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: YAxisMapping: buttons 4 and 5 [ 21.451] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.451] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.2/input/input7/event4" [ 21.451] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v7.0" (type: KEYBOARD, id 10) [ 21.451] (**) Option "xkb_rules" "evdev" [ 21.451] (**) Option "xkb_model" "pc105" [ 21.451] (**) Option "xkb_layout" "de" [ 21.452] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: initialized for relative axes. [ 21.452] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes. [ 21.452] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) keeping acceleration scheme 1 [ 21.452] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration profile 0 [ 21.452] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration factor: 2.000 [ 21.452] (**) Microsoft Microsoft® 2.4GHz Transceiver v7.0: (accel) acceleration threshold: 4 [ 21.452] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v7.0 (/dev/input/js0) [ 21.452] (II) No input driver specified, ignoring this device. [ 21.452] (II) This device may have been added with another device file. [ 21.452] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event10) [ 21.452] (II) No input driver specified, ignoring this device. [ 21.452] (II) This device may have been added with another device file. [ 21.452] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event9) [ 21.452] (II) No input driver specified, ignoring this device. [ 21.452] (II) This device may have been added with another device file. [ 21.452] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event8) [ 21.452] (II) No input driver specified, ignoring this device. [ 21.452] (II) This device may have been added with another device file. [ 21.453] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event7) [ 21.453] (II) No input driver specified, ignoring this device. [ 21.453] (II) This device may have been added with another device file. [ 21.453] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event6) [ 21.453] (II) No input driver specified, ignoring this device. [ 21.453] (II) This device may have been added with another device file. [ 21.453] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event5) [ 21.453] (II) No input driver specified, ignoring this device. [ 21.453] (II) This device may have been added with another device file. [ 21.453] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event12) [ 21.453] (II) No input driver specified, ignoring this device. [ 21.453] (II) This device may have been added with another device file. [ 21.453] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11) [ 21.453] (II) No input driver specified, ignoring this device. [ 21.453] (II) This device may have been added with another device file. [ 21.454] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13) [ 21.454] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 21.454] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys' [ 21.454] (**) Eee PC WMI hotkeys: always reports core events [ 21.454] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event13" [ 21.454] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0 [ 21.454] (--) evdev: Eee PC WMI hotkeys: Found keys [ 21.454] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard [ 21.454] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input16/event13" [ 21.454] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11) [ 21.454] (**) Option "xkb_rules" "evdev" [ 21.454] (**) Option "xkb_model" "pc105" [ 21.454] (**) Option "xkb_layout" "de" [ 53.481] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 56.789] (II) NVIDIA(GPU-0): Display (LG Electronics E2342 (CRT-1)) does not support NVIDIA [ 56.789] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 56.817] (II) NVIDIA(0): Setting mode "NULL"
xorg.conf - heisst bei mir xorg.conf.07232014 ???
Section "Device" Identifier "Default Card 1" BusID "PCI:1@0:0:0" EndSection
Ich bin nur Anwender und will mich damit nicht ewig befassen. Gibt es eine Möglichkeit (Bootoption?) den Standarttreiber zu laden - das reicht mir mittlerweile nach etlichen frustrierten Stunden schon.
Danke