Hallo,
ich habe Probleme mit der Einrichtung eines Epson Scanners (Perfection V330 Photo).
Ich bin den in Epson-Scanner beschriebenen Schritten gefolgt um den Scanner zu installieren. Trotzdem wird er von Sane nicht erkannt.
Verwirrend finde ich, das verschiedene Tests unterschiedliche Ergebnisse zeigen:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 | $ sudo sane-find-scanner -p [sudo] password for daro: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON Perfection V33/V330]) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # No Mustek parallel port scanners found. If you expected something # different, make sure the scanner is correctly connected to your computer # and you have apropriate access rights. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. |
Aber:
1 2 3 4 5 6 | $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). |