Ich habe bei meinem Rechner seit einiger Zeit das Problem, dass manchmal aus heiterem Himmel der Bildschirm komplett "abstürzt" und dieser dann über die gesamte Fläche in allen erdenklichen Farben flackert. Konkret sieht das so aus, dass der Bildschirm immer nur eine einzige Farbe anzeigt, diese aber im Abstand von wenigen Hundertstelsekunden ständig wechselt (–> buntes flackern). Ich hatte dieses Problem auch schon unter 13.10 und ist jetzt unter 14.04 unverändert immer noch da. Es kann jederzeit und bei jeder Anwendung auftreten, sowohl bei e-mail lesen al auch bei full hd videos. Mit der CPU-Last hängt es daher wohl eher nicht zusammen. Temperatur der CPU (Intel® Core™ i3-3120M) geht auch nie über 60 Grad. Was könnte das Problem sein?
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: ZOTAC International (MCO) Ltd. Device [19da:2111] Kernel driver in use: i915
xrandr --prop
xrandr --prop Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 32767 x 32767 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 473mm x 296mm EDID: 00ffffffffffff0022f0a92601010101 10110103802f1e78eeb535a5564a9a25 105054a56b90710081409500a900b300 01010101010121399030621a274068b0 3600d9281100001c000000fd00304c18 5210000a202020202020000000fc0048 502077323230370a20202020000000ff 00435a4437313630314d360a202000fc Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on 1680x1050 60.0*+ 1600x1000 60.0 + 1280x1024 75.0 1440x900 59.9 1280x960 60.0 1152x864 75.0 1152x720 60.0 1024x768 75.1 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VIRTUAL1 disconnected (normal left inverted right x axis y axis)
/var/log/Xorg.0.log
[ 4.865] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 4.865] X Protocol Version 11, Revision 0 [ 4.865] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 4.865] Current Operating System: Linux hanno-ZBOX-ID83 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 4.865] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=a3ac16c3-bcd6-4373-9262-3c89618e4a1c ro quiet splash vt.handoff=7 [ 4.865] Build Date: 16 April 2014 01:40:08PM [ 4.865] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 4.865] Current version of pixman: 0.30.2 [ 4.866] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.866] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.866] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 27 16:41:25 2014 [ 4.866] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.866] (==) No Layout section. Using the first Screen section. [ 4.866] (==) No screen section available. Using defaults. [ 4.866] (**) |-->Screen "Default Screen Section" (0) [ 4.866] (**) | |-->Monitor "<default monitor>" [ 4.867] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.867] (==) Automatically adding devices [ 4.867] (==) Automatically enabling devices [ 4.867] (==) Automatically adding GPU devices [ 4.867] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.867] Entry deleted from font path. [ 4.867] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.867] Entry deleted from font path. [ 4.867] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.867] Entry deleted from font path. [ 4.867] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.867] Entry deleted from font path. [ 4.867] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.867] Entry deleted from font path. [ 4.867] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.867] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.867] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.867] (II) Loader magic: 0xb77896c0 [ 4.867] (II) Module ABI versions: [ 4.867] X.Org ANSI C Emulation: 0.4 [ 4.867] X.Org Video Driver: 15.0 [ 4.867] X.Org XInput driver : 20.0 [ 4.867] X.Org Server Extension : 8.0 [ 4.867] (II) xfree86: Adding drm device (/dev/dri/card0) [ 4.869] (--) PCI:*(0:0:2:0) 8086:0166:19da:2111 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 4.869] Initializing built-in extension Generic Event Extension [ 4.869] Initializing built-in extension SHAPE [ 4.869] Initializing built-in extension MIT-SHM [ 4.869] Initializing built-in extension XInputExtension [ 4.869] Initializing built-in extension XTEST [ 4.869] Initializing built-in extension BIG-REQUESTS [ 4.869] Initializing built-in extension SYNC [ 4.869] Initializing built-in extension XKEYBOARD [ 4.869] Initializing built-in extension XC-MISC [ 4.869] Initializing built-in extension SECURITY [ 4.869] Initializing built-in extension XINERAMA [ 4.869] Initializing built-in extension XFIXES [ 4.869] Initializing built-in extension RENDER [ 4.869] Initializing built-in extension RANDR [ 4.869] Initializing built-in extension COMPOSITE [ 4.869] Initializing built-in extension DAMAGE [ 4.869] Initializing built-in extension MIT-SCREEN-SAVER [ 4.869] Initializing built-in extension DOUBLE-BUFFER [ 4.869] Initializing built-in extension RECORD [ 4.869] Initializing built-in extension DPMS [ 4.869] Initializing built-in extension Present [ 4.869] Initializing built-in extension DRI3 [ 4.869] Initializing built-in extension X-Resource [ 4.869] Initializing built-in extension XVideo [ 4.869] Initializing built-in extension XVideo-MotionCompensation [ 4.869] Initializing built-in extension SELinux [ 4.869] Initializing built-in extension XFree86-VidModeExtension [ 4.869] Initializing built-in extension XFree86-DGA [ 4.869] Initializing built-in extension XFree86-DRI [ 4.869] Initializing built-in extension DRI2 [ 4.869] (II) LoadModule: "glx" [ 4.873] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 4.893] (II) Module glx: vendor="X.Org Foundation" [ 4.893] compiled for 1.15.1, module version = 1.0.0 [ 4.893] ABI class: X.Org Server Extension, version 8.0 [ 4.893] (==) AIGLX enabled [ 4.893] Loading extension GLX [ 4.893] (==) Matched intel as autoconfigured driver 0 [ 4.893] (==) Matched intel as autoconfigured driver 1 [ 4.893] (==) Matched modesetting as autoconfigured driver 2 [ 4.893] (==) Matched fbdev as autoconfigured driver 3 [ 4.893] (==) Matched vesa as autoconfigured driver 4 [ 4.893] (==) Assigned the driver to the xf86ConfigLayout [ 4.893] (II) LoadModule: "intel" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 4.895] (II) Module intel: vendor="X.Org Foundation" [ 4.895] compiled for 1.15.0, module version = 2.99.910 [ 4.895] Module class: X.Org Video Driver [ 4.895] ABI class: X.Org Video Driver, version 15.0 [ 4.895] (II) LoadModule: "modesetting" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 4.896] (II) Module modesetting: vendor="X.Org Foundation" [ 4.896] compiled for 1.15.0, module version = 0.8.1 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 15.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.897] (II) Module fbdev: vendor="X.Org Foundation" [ 4.897] compiled for 1.15.0, module version = 0.4.4 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 15.0 [ 4.897] (II) LoadModule: "vesa" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.897] (II) Module vesa: vendor="X.Org Foundation" [ 4.897] compiled for 1.15.0, module version = 2.3.3 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 15.0 [ 4.897] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 4.898] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 4.898] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 4.898] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 4.898] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 4.898] (II) FBDEV: driver for framebuffer: fbdev [ 4.898] (II) VESA: driver for VESA chipsets: vesa [ 4.898] (++) using VT number 7 [ 4.898] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>) [ 4.898] (WW) Falling back to old probe method for modesetting [ 4.898] (WW) Falling back to old probe method for fbdev [ 4.898] (II) Loading sub module "fbdevhw" [ 4.898] (II) LoadModule: "fbdevhw" [ 4.899] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.899] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.899] compiled for 1.15.1, module version = 0.0.2 [ 4.899] ABI class: X.Org Video Driver, version 15.0 [ 4.899] (WW) Falling back to old probe method for vesa [ 4.899] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000 [ 4.899] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx [ 4.899] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.899] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 4.899] (==) intel(0): RGB weight 888 [ 4.899] (==) intel(0): Default visual is TrueColor [ 4.899] (**) intel(0): Framebuffer tiled [ 4.899] (**) intel(0): Pixmaps tiled [ 4.899] (**) intel(0): "Tear free" disabled [ 4.899] (**) intel(0): Forcing per-crtc-pixmaps? no [ 4.900] (II) intel(0): Output VGA1 has no monitor section [ 4.900] (II) intel(0): Output HDMI1 has no monitor section [ 4.900] (II) intel(0): Output HDMI2 has no monitor section [ 4.900] (II) intel(0): Output DP1 has no monitor section [ 4.900] (II) intel(0): Output DP2 has no monitor section [ 4.900] (II) intel(0): Output VIRTUAL1 has no monitor section [ 4.900] (--) intel(0): Output HDMI1 using initial mode 1680x1050 on pipe 0 [ 4.900] (==) intel(0): DPI set to (96, 96) [ 4.900] (II) Loading sub module "dri2" [ 4.900] (II) LoadModule: "dri2" [ 4.900] (II) Module "dri2" already built-in [ 4.900] (II) UnloadModule: "modesetting" [ 4.900] (II) Unloading modesetting [ 4.900] (II) UnloadModule: "fbdev" [ 4.900] (II) Unloading fbdev [ 4.900] (II) UnloadSubModule: "fbdevhw" [ 4.900] (II) Unloading fbdevhw [ 4.900] (II) UnloadModule: "vesa" [ 4.900] (II) Unloading vesa [ 4.900] (==) Depth 24 pixmap format is 32 bpp [ 4.900] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend [ 4.900] (==) intel(0): Backing store enabled [ 4.900] (==) intel(0): Silken mouse enabled [ 4.900] (II) intel(0): HW Cursor enabled [ 4.900] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 4.901] (==) intel(0): DPMS enabled [ 4.901] (II) intel(0): [DRI2] Setup complete [ 4.901] (II) intel(0): [DRI2] DRI driver: i965 [ 4.901] (II) intel(0): [DRI2] VDPAU driver: i965 [ 4.901] (II) intel(0): direct rendering: DRI2 Enabled [ 4.901] (==) intel(0): hotplug detection: "enabled" [ 4.901] (--) RandR disabled [ 4.910] (II) SELinux: Disabled on system [ 4.915] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 4.915] (II) AIGLX: enabled GLX_ARB_create_context [ 4.915] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 4.915] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 4.915] (II) AIGLX: enabled GLX_INTEL_swap_event [ 4.915] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 4.915] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 4.915] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 4.915] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 4.915] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 4.915] (II) AIGLX: Loaded and initialized i965 [ 4.915] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 4.918] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 4.984] (II) intel(0): Setting screen physical size to 444 x 277 [ 4.992] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 4.996] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 4.996] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4.996] (II) LoadModule: "evdev" [ 4.996] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 4.997] (II) Module evdev: vendor="X.Org Foundation" [ 4.997] compiled for 1.15.0, module version = 2.8.2 [ 4.997] Module class: X.Org XInput Driver [ 4.997] ABI class: X.Org XInput driver, version 20.0 [ 4.997] (II) Using input driver 'evdev' for 'Power Button' [ 4.997] (**) Power Button: always reports core events [ 4.997] (**) evdev: Power Button: Device: "/dev/input/event1" [ 4.997] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4.997] (--) evdev: Power Button: Found keys [ 4.997] (II) evdev: Power Button: Configuring as keyboard [ 4.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 4.997] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 4.997] (**) Option "xkb_rules" "evdev" [ 4.997] (**) Option "xkb_model" "pc105" [ 4.997] (**) Option "xkb_layout" "de" [ 5.000] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 5.001] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 5.001] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 5.001] (II) Using input driver 'evdev' for 'Video Bus' [ 5.001] (**) Video Bus: always reports core events [ 5.001] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 5.001] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 5.001] (--) evdev: Video Bus: Found keys [ 5.001] (II) evdev: Video Bus: Configuring as keyboard [ 5.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4" [ 5.001] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 5.002] (**) Option "xkb_rules" "evdev" [ 5.002] (**) Option "xkb_model" "pc105" [ 5.002] (**) Option "xkb_layout" "de" [ 5.002] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 5.002] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 5.002] (II) Using input driver 'evdev' for 'Power Button' [ 5.002] (**) Power Button: always reports core events [ 5.002] (**) evdev: Power Button: Device: "/dev/input/event0" [ 5.002] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 5.002] (--) evdev: Power Button: Found keys [ 5.002] (II) evdev: Power Button: Configuring as keyboard [ 5.002] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 5.002] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 5.002] (**) Option "xkb_rules" "evdev" [ 5.002] (**) Option "xkb_model" "pc105" [ 5.002] (**) Option "xkb_layout" "de" [ 5.003] (II) config/udev: Adding drm device (/dev/dri/card0) [ 5.003] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 5.003] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2) [ 5.003] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 5.003] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 5.003] (**) Logitech USB Receiver: always reports core events [ 5.003] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2" [ 5.003] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e [ 5.003] (--) evdev: Logitech USB Receiver: Found keys [ 5.003] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 5.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input2/event2" [ 5.003] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9) [ 5.003] (**) Option "xkb_rules" "evdev" [ 5.003] (**) Option "xkb_model" "pc105" [ 5.003] (**) Option "xkb_layout" "de" [ 5.004] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3) [ 5.004] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 5.004] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 5.004] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 5.004] (**) Logitech USB Receiver: always reports core events [ 5.004] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3" [ 5.004] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e [ 5.004] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons [ 5.004] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 5.004] (--) evdev: Logitech USB Receiver: Found relative axes [ 5.004] (--) evdev: Logitech USB Receiver: Found x and y relative axes [ 5.004] (--) evdev: Logitech USB Receiver: Found absolute axes [ 5.004] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist. [ 5.004] (--) evdev: Logitech USB Receiver: Found keys [ 5.004] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 5.004] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 5.004] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 5.004] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 5.004] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 5.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input3/event3" [ 5.004] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10) [ 5.004] (**) Option "xkb_rules" "evdev" [ 5.004] (**) Option "xkb_model" "pc105" [ 5.004] (**) Option "xkb_layout" "de" [ 5.005] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 5.005] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. [ 5.005] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 5.005] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 5.005] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 5.005] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 5.005] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) [ 5.005] (II) No input driver specified, ignoring this device. [ 5.005] (II) This device may have been added with another device file. [ 5.006] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 5.006] (II) No input driver specified, ignoring this device. [ 5.006] (II) This device may have been added with another device file. [ 5.006] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event7) [ 5.006] (II) No input driver specified, ignoring this device. [ 5.006] (II) This device may have been added with another device file. [ 5.006] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6) [ 5.006] (II) No input driver specified, ignoring this device. [ 5.006] (II) This device may have been added with another device file. [ 5.006] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event5) [ 5.006] (II) No input driver specified, ignoring this device. [ 5.006] (II) This device may have been added with another device file. [ 5.078] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm [ 5.709] (II) intel(0): EDID vendor "HWP", prod id 9897 [ 5.710] (II) intel(0): Using EDID range info for horizontal sync [ 5.710] (II) intel(0): Using EDID range info for vertical refresh [ 5.710] (II) intel(0): Printing DDC gathered Modelines: [ 5.710] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP) [ 5.710] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5.710] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 5.710] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5.710] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5.710] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 5.710] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 5.710] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5.710] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 5.710] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 5.710] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 5.710] (II) intel(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 5.710] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 5.710] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 5.710] (II) intel(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz e) [ 5.710] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 16.775] (II) XKB: reuse xkmfile /var/lib/xkb/server-935791BB8D314AF76E0BAA786B66BB82FD866F95.xkm [ 17.846] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 18.027] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 18.041] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 19.297] (II) XKB: reuse xkmfile /var/lib/xkb/server-A237F4D5ECC0A2998042D3B58D9A7CE5E820BA0E.xkm