Hallo,
ich poste das Thema hier, da ich denke, dass es mit der Grafikkarte und den Treibern zusammenhängt. Ich hatte einen ähnlichen Post bereits unter "Ubuntu installieren" gepostet, wahrscheinlich ist er hier aber nun besser aufgehoben. Wenn das die Mods nicht so sehen sollten, bitte ich um Verschiebung.
Ich habe letzte Woche per USB-Medium von 12.04 auf 14.04 upgegradet. Das lief problemlos. Nach Eingabe des Anmeldepassworts ist das System aber eingefroren. Dank der Hinweise im anderen Thread kam ich auf den Gedanken, dass beim Upgrade meine NVidia-Treiber verloren gegangen sind. Ich habe sie also über die Systemaktualisierung nachinstalliert.
Jetzt tritt folgendes Problem auf: Nach Eingabe des Anmeldenamens teilt sich der Bildschirm horizontal in zwei Hälften. Die untere ist schwarz, die obere Ubuntuviolett mit flackernden gelben und schwarzen Streifen. Dann geht nichts mehr, ausser Reset zu drücken.
Ich kann das System aber über Shift → Grub → Recovery Mode ohne weiteres und dann ohne jeden Fehler korrekt starten und nutzen.
Hier noch die geforderten Angaben:
sandra@sandra-desktop:~$ lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2) Subsystem: Biostar Microtech Int'l Corp Device [1565:1405] Kernel driver in use: nvidia
sandra@sandra-desktop:~$ xrandr --prop Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 4096 x 4096 VGA-0 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm EDID: 00ffffffffffff004c2d6e0037314f4d 050d01030f221b8cea6f8ba25a4d9424 1a5156bfef808180614045403140818f 614f454f314f302a009851002a403070 1300520e1100001e000000fd00384b1e 510e000a202020202020000000fc0053 796e634d61737465720a2020000000ff 00484d45573130333230330a20200045 SignalFormat: VGA supported: VGA ConnectorType: VGA ConnectorNumber: 0 _ConnectorLocation: 0 1280x1024 60.0*+ 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 60.0 59.9
____________________________________________ Start of NVIDIA bug report log file. Please include this file, along with a detailed description of your problem, when reporting a graphics driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com) or by sending email to 'linux-bugs@nvidia.com'. nvidia-bug-report.sh Version: 14306482 Date: Do 14. Aug 15:21:20 CEST 2014 uname: Linux sandra-desktop 3.13.0-33-generic #58-Ubuntu SMP Tue Jul 29 16:47:17 UTC 2014 i686 athlon i686 GNU/Linux command line flags: ____________________________________________ *** /etc/issue *** ls: -rw-r--r-- 1 root root 26 2014-07-22 17:34:41.000000000 +0200 /etc/issue Ubuntu 14.04.1 LTS \n \l ____________________________________________ *** /etc/debian_version *** ls: -rw-r--r-- 1 root root 11 2014-02-20 03:43:56.000000000 +0100 /etc/debian_version jessie/sid ____________________________________________ *** /var/log/nvidia-installer.log does not exist ____________________________________________ *** /var/log/Xorg.0.log *** ls: -rw-r--r-- 1 root root 21174 2014-08-14 15:20:30.027836975 +0200 /var/log/Xorg.0.log [ 31.186] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 31.186] X Protocol Version 11, Revision 0 [ 31.186] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 31.186] Current Operating System: Linux sandra-desktop 3.13.0-33-generic #58-Ubuntu SMP Tue Jul 29 16:47:17 UTC 2014 i686 [ 31.186] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-33-generic root=UUID=8276b7e1-9c42-47dc-bdf4-98ee6a40f127 ro recovery nomodeset [ 31.186] Build Date: 16 April 2014 01:40:08PM [ 31.186] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 31.186] Current version of pixman: 0.30.2 [ 31.186] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 31.186] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 31.186] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 14 15:08:51 2014 [ 31.223] (==) Using config file: "/etc/X11/xorg.conf" [ 31.223] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 31.266] (==) ServerLayout "Layout0" [ 31.266] (**) |-->Screen "Screen0" (0) [ 31.266] (**) | |-->Monitor "Monitor0" [ 31.267] (**) | |-->Device "Device0" [ 31.267] (**) |-->Input Device "Keyboard0" [ 31.267] (**) |-->Input Device "Mouse0" [ 31.267] (**) Option "Xinerama" "0" [ 31.267] (==) Automatically adding devices [ 31.267] (==) Automatically enabling devices [ 31.267] (==) Automatically adding GPU devices [ 31.267] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 31.267] Entry deleted from font path. [ 31.267] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 31.267] Entry deleted from font path. [ 31.267] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 31.267] Entry deleted from font path. [ 31.267] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 31.267] Entry deleted from font path. [ 31.267] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 31.267] Entry deleted from font path. [ 31.267] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 31.267] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 31.267] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 31.267] (WW) Disabling Keyboard0 [ 31.267] (WW) Disabling Mouse0 [ 31.267] (II) Loader magic: 0xb77256c0 [ 31.267] (II) Module ABI versions: [ 31.267] X.Org ANSI C Emulation: 0.4 [ 31.267] X.Org Video Driver: 15.0 [ 31.267] X.Org XInput driver : 20.0 [ 31.267] X.Org Server Extension : 8.0 [ 31.268] (--) PCI:*(0:0:13:0) 10de:03d0:1565:1405 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 [ 31.268] Initializing built-in extension Generic Event Extension [ 31.268] Initializing built-in extension SHAPE [ 31.268] Initializing built-in extension MIT-SHM [ 31.268] Initializing built-in extension XInputExtension [ 31.268] Initializing built-in extension XTEST [ 31.268] Initializing built-in extension BIG-REQUESTS [ 31.268] Initializing built-in extension SYNC [ 31.268] Initializing built-in extension XKEYBOARD [ 31.268] Initializing built-in extension XC-MISC [ 31.268] Initializing built-in extension SECURITY [ 31.268] Initializing built-in extension XINERAMA [ 31.268] Initializing built-in extension XFIXES [ 31.268] Initializing built-in extension RENDER [ 31.268] Initializing built-in extension RANDR [ 31.268] Initializing built-in extension COMPOSITE [ 31.268] Initializing built-in extension DAMAGE [ 31.268] Initializing built-in extension MIT-SCREEN-SAVER [ 31.268] Initializing built-in extension DOUBLE-BUFFER [ 31.268] Initializing built-in extension RECORD [ 31.268] Initializing built-in extension DPMS [ 31.268] Initializing built-in extension Present [ 31.268] Initializing built-in extension DRI3 [ 31.268] Initializing built-in extension X-Resource [ 31.268] Initializing built-in extension XVideo [ 31.268] Initializing built-in extension XVideo-MotionCompensation [ 31.268] Initializing built-in extension SELinux [ 31.268] Initializing built-in extension XFree86-VidModeExtension [ 31.268] Initializing built-in extension XFree86-DGA [ 31.268] Initializing built-in extension XFree86-DRI [ 31.268] Initializing built-in extension DRI2 [ 31.268] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere. [ 31.268] (II) "glx" will be loaded by default. [ 31.268] (WW) "xmir" is not to be loaded by default. Skipping. [ 31.268] (II) LoadModule: "glx" [ 31.268] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so [ 31.605] (II) Module glx: vendor="NVIDIA Corporation" [ 31.605] compiled for 4.0.2, module version = 1.0.0 [ 31.605] Module class: X.Org Server Extension [ 31.605] (II) NVIDIA GLX Module 304.117 Tue Nov 26 21:56:56 PST 2013 [ 31.605] Loading extension GLX [ 31.605] (II) LoadModule: "nvidia" [ 31.605] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 31.606] (II) Module nvidia: vendor="NVIDIA Corporation" [ 31.606] compiled for 4.0.2, module version = 1.0.0 [ 31.606] Module class: X.Org Video Driver [ 31.606] (II) NVIDIA dlloader X Driver 304.117 Tue Nov 26 21:38:08 PST 2013 [ 31.606] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 31.606] (++) using VT number 7 [ 31.609] (II) Loading sub module "fb" [ 31.609] (II) LoadModule: "fb" [ 31.619] (II) Loading /usr/lib/xorg/modules/libfb.so [ 31.619] (II) Module fb: vendor="X.Org Foundation" [ 31.619] compiled for 1.15.1, module version = 1.0.0 [ 31.619] ABI class: X.Org ANSI C Emulation, version 0.4 [ 31.619] (II) Loading sub module "wfb" [ 31.619] (II) LoadModule: "wfb" [ 31.619] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 31.619] (II) Module wfb: vendor="X.Org Foundation" [ 31.619] compiled for 1.15.1, module version = 1.0.0 [ 31.619] ABI class: X.Org ANSI C Emulation, version 0.4 [ 31.620] (II) Loading sub module "ramdac" [ 31.620] (II) LoadModule: "ramdac" [ 31.620] (II) Module "ramdac" already built-in [ 31.620] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 31.620] (==) NVIDIA(0): RGB weight 888 [ 31.620] (==) NVIDIA(0): Default visual is TrueColor [ 31.620] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 31.620] (**) NVIDIA(0): Option "Stereo" "0" [ 31.620] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0" [ 31.620] (**) NVIDIA(0): Option "SLI" "Off" [ 31.620] (**) NVIDIA(0): Option "MultiGPU" "Off" [ 31.620] (**) NVIDIA(0): Option "BaseMosaic" "off" [ 31.620] (**) NVIDIA(0): Stereo disabled by request [ 31.620] (**) NVIDIA(0): NVIDIA SLI disabled. [ 31.620] (**) NVIDIA(0): NVIDIA Multi-GPU disabled. [ 31.620] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 {viewportout=1280x800+0+112}" [ 31.620] (**) NVIDIA(0): Enabling 2D acceleration [ 32.145] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 32.145] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 32.146] (II) NVIDIA(0): NVIDIA GPU GeForce 6150SE nForce 430 (C61) at PCI:0:13:0 [ 32.146] (II) NVIDIA(0): (GPU-0) [ 32.146] (--) NVIDIA(0): Memory: 524288 kBytes [ 32.146] (--) NVIDIA(0): VideoBIOS: 05.61.32.22.01 [ 32.146] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 32.146] (--) NVIDIA(0): Valid display device(s) on GeForce 6150SE nForce 430 at PCI:0:13:0 [ 32.146] (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (connected) [ 32.146] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 350.0 MHz maximum pixel clock [ 32.146] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 32.146] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 32.146] (**) NVIDIA(0): has been enabled on all display devices.) [ 32.146] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 800 +0 +112 [ 32.146] (II) NVIDIA(0): Validated MetaModes: [ 32.146] (II) NVIDIA(0): "nvidia-auto-select+0+0{viewportout=1280x800+0+112}" [ 32.146] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 [ 32.147] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152 [ 32.147] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config [ 32.147] (--) NVIDIA(0): option [ 32.147] (--) Depth 24 pixmap format is 32 bpp [ 32.151] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{viewportout=1280x800+0+112}" [ 32.241] Loading extension NV-GLX [ 32.264] (==) NVIDIA(0): Disabling shared memory pixmaps [ 32.265] (==) NVIDIA(0): Backing store enabled [ 32.265] (==) NVIDIA(0): Silken mouse enabled [ 32.265] (**) NVIDIA(0): DPMS enabled [ 32.265] Loading extension NV-CONTROL [ 32.265] Loading extension XINERAMA [ 32.265] (II) Loading sub module "dri2" [ 32.265] (II) LoadModule: "dri2" [ 32.265] (II) Module "dri2" already built-in [ 32.265] (II) NVIDIA(0): [DRI2] Setup complete [ 32.265] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 32.265] (--) RandR disabled [ 32.272] (II) SELinux: Disabled on system [ 32.272] (II) Initializing extension GLX [ 32.285] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 32.288] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 32.288] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.288] (II) LoadModule: "evdev" [ 32.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 32.304] (II) Module evdev: vendor="X.Org Foundation" [ 32.304] compiled for 1.15.0, module version = 2.8.2 [ 32.304] Module class: X.Org XInput Driver [ 32.304] ABI class: X.Org XInput driver, version 20.0 [ 32.304] (II) Using input driver 'evdev' for 'Power Button' [ 32.304] (**) Power Button: always reports core events [ 32.304] (**) evdev: Power Button: Device: "/dev/input/event1" [ 32.304] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 32.304] (--) evdev: Power Button: Found keys [ 32.304] (II) evdev: Power Button: Configuring as keyboard [ 32.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 32.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 32.304] (**) Option "xkb_rules" "evdev" [ 32.304] (**) Option "xkb_model" "pc105" [ 32.304] (**) Option "xkb_layout" "de" [ 32.306] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 32.307] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 32.307] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.307] (II) Using input driver 'evdev' for 'Power Button' [ 32.307] (**) Power Button: always reports core events [ 32.307] (**) evdev: Power Button: Device: "/dev/input/event0" [ 32.307] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 32.307] (--) evdev: Power Button: Found keys [ 32.307] (II) evdev: Power Button: Configuring as keyboard [ 32.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 32.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 32.307] (**) Option "xkb_rules" "evdev" [ 32.307] (**) Option "xkb_model" "pc105" [ 32.307] (**) Option "xkb_layout" "de" [ 32.307] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event9) [ 32.308] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall" [ 32.308] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)' [ 32.308] (**) UVC Camera (046d:0825): always reports core events [ 32.308] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event9" [ 32.308] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825 [ 32.308] (--) evdev: UVC Camera (046d:0825): Found keys [ 32.308] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard [ 32.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/input/input10/event9" [ 32.308] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8) [ 32.308] (**) Option "xkb_rules" "evdev" [ 32.308] (**) Option "xkb_model" "pc105" [ 32.308] (**) Option "xkb_layout" "de" [ 32.308] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8) [ 32.308] (II) No input driver specified, ignoring this device. [ 32.308] (II) This device may have been added with another device file. [ 32.308] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7) [ 32.308] (II) No input driver specified, ignoring this device. [ 32.308] (II) This device may have been added with another device file. [ 32.308] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6) [ 32.308] (II) No input driver specified, ignoring this device. [ 32.309] (II) This device may have been added with another device file. [ 32.309] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event5) [ 32.309] (II) No input driver specified, ignoring this device. [ 32.309] (II) This device may have been added with another device file. [ 32.309] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event4) [ 32.309] (II) No input driver specified, ignoring this device. [ 32.309] (II) This device may have been added with another device file. [ 32.309] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2) [ 32.309] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 32.309] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 32.309] (**) AT Translated Set 2 keyboard: always reports core events [ 32.309] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2" [ 32.309] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 32.309] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 32.309] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 32.309] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2" [ 32.309] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 32.309] (**) Option "xkb_rules" "evdev" [ 32.309] (**) Option "xkb_model" "pc105" [ 32.309] (**) Option "xkb_layout" "de" [ 32.310] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event3) [ 32.310] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 32.310] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse' [ 32.310] (**) ImPS/2 Generic Wheel Mouse: always reports core events [ 32.310] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3" [ 32.310] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5 [ 32.310] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons [ 32.310] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) [ 32.310] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes [ 32.310] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes [ 32.310] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse [ 32.310] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support [ 32.310] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 [ 32.310] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 32.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3" [ 32.310] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10) [ 32.310] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes. [ 32.310] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 [ 32.310] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 [ 32.310] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000 [ 32.310] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4 [ 32.310] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0) [ 32.310] (II) No input driver specified, ignoring this device. [ 32.310] (II) This device may have been added with another device file. [ 33.961] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 33.961] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 33.961] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 33.961] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 33.961] (**) NVIDIA(0): has been enabled on all display devices.) [ 34.298] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 34.298] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 34.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 34.298] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 34.298] (**) NVIDIA(0): has been enabled on all display devices.) [ 34.828] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 34.828] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 34.828] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 34.828] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 34.828] (**) NVIDIA(0): has been enabled on all display devices.) [ 40.912] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 40.912] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 40.912] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 40.912] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 40.912] (**) NVIDIA(0): has been enabled on all display devices.) [ 41.982] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 42.129] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 42.129] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 42.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 42.129] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 42.129] (**) NVIDIA(0): has been enabled on all display devices.) [ 42.272] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 42.272] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 42.272] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 42.272] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 42.272] (**) NVIDIA(0): has been enabled on all display devices.) [ 42.410] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 42.428] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 43.204] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 43.204] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 43.204] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 43.204] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 43.204] (**) NVIDIA(0): has been enabled on all display devices.) [ 45.941] (II) XKB: reuse xkmfile /var/lib/xkb/server-A237F4D5ECC0A2998042D3B58D9A7CE5E820BA0E.xkm [ 59.066] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 59.066] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 59.066] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 59.066] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 59.066] (**) NVIDIA(0): has been enabled on all display devices.) [ 729.959] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA [ 729.959] (II) NVIDIA(GPU-0): 3D Vision stereo. [ 729.959] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 729.959] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies [ 729.959] (**) NVIDIA(0): has been enabled on all display devices.) ____________________________________________ *** /etc/X11/xorg.conf *** ls: -rw-r--r-- 1 root root 1790 2014-08-13 09:15:10.057470124 +0200 /etc/X11/xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildd@komainu) Mon Feb 3 15:11:14 UTC 2014 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 6150SE nForce 430" EndSection Section "Screen" # Removed Option "metamodes" "nvidia-auto-select +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "CRT-0" Option "metamodes" "nvidia-auto-select +0+0 {viewportout=1280x800+0+112}" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/10-evdev.conf *** ls: -rw-r--r-- 1 root root 1099 2014-04-16 15:42:23.000000000 +0200 /usr/share/X11/xorg.conf.d/10-evdev.conf # # Catch-all evdev loader for udev-based systems # We don't simply match on any device since that also adds accelerometers # and other devices that we don't really want to use. The list below # matches everything but joysticks. Section "InputClass" Identifier "evdev pointer catchall" MatchIsPointer "on" MatchDevicePath "/dev/input/event*" Driver "evdev" EndSection Section "InputClass" Identifier "evdev keyboard catchall" MatchIsKeyboard "on" MatchDevicePath "/dev/input/event*" Driver "evdev" EndSection Section "InputClass" Identifier "evdev touchpad catchall" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Driver "evdev" EndSection Section "InputClass" Identifier "evdev tablet catchall" MatchIsTablet "on" MatchDevicePath "/dev/input/event*" Driver "evdev" EndSection Section "InputClass" Identifier "evdev touchscreen catchall" MatchIsTouchscreen "on" MatchDevicePath "/dev/input/event*" Driver "evdev" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/10-quirks.conf *** ls: -rw-r--r-- 1 root root 1867 2014-04-16 15:42:23.000000000 +0200 /usr/share/X11/xorg.conf.d/10-quirks.conf # Collection of quirks and blacklist/whitelists for specific devices. # Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable # http://bugs.freedesktop.org/show_bug.cgi?id=22442 Section "InputClass" Identifier "ThinkPad HDAPS accelerometer blacklist" MatchProduct "ThinkPad HDAPS accelerometer data" Option "Ignore" "on" EndSection # https://bugzilla.redhat.com/show_bug.cgi?id=523914 # Mouse does not move in PV Xen guest # Explicitly tell evdev to not ignore the absolute axes. Section "InputClass" Identifier "Xen Virtual Pointer axis blacklist" MatchProduct "Xen Virtual Pointer" Option "IgnoreAbsoluteAxes" "off" Option "IgnoreRelativeAxes" "off" EndSection # https://bugzilla.redhat.com/show_bug.cgi?id=612140 # please make Evoluent VerticalMouse 3 work out of the box # Button mapping on this mouse is quirky Section "InputClass" Identifier "Evoluent VerticalMouse 3" MatchProduct "Evoluent VerticalMouse 3" # Sets following configuration: # top button: left # middle button: middle # bottom button: right # wheel click: middle # thumb button: 8 (back) Option "ButtonMapping" "1 2 2 4 5 6 7 3 8" EndSection # https://bugs.freedesktop.org/show_bug.cgi?id=55867 # Bug 55867 - Doesn't know how to tag XI_TRACKBALL Section "InputClass" Identifier "Tag trackballs as XI_TRACKBALL" MatchProduct "trackball" MatchDriver "evdev" Option "TypeName" "TRACKBALL" EndSection # https://bugs.freedesktop.org/show_bug.cgi?id=62831 # Bug 62831 - Mionix Naos 5000 mouse detected incorrectly Section "InputClass" Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE" MatchProduct "La-VIEW Technology Naos 5000 Mouse" MatchDriver "evdev" Option "TypeName" "MOUSE" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/11-evdev-quirks.conf *** ls: -rw-r--r-- 1 root root 590 2014-02-05 10:45:56.000000000 +0100 /usr/share/X11/xorg.conf.d/11-evdev-quirks.conf Section "InputClass" Identifier "Avago Technologies mouse quirks (LP: #746639)" MatchIsPointer "on" MatchDevicePath "/dev/input/event*" Driver "evdev" MatchUSBID "192f:0416" Option "Emulate3Buttons" "True" Option "Emulate3Timeout" "50" EndSection # X/Y axis not working due to device reporting absolute axes # https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/325581 # https://bugs.freedesktop.org/show_bug.cgi?id=32882 Section "InputClass" Identifier "Benq m310" MatchProduct "HID 0d62:1000" Driver "evdev" Option "IgnoreAbsoluteAxes" "true" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf *** ls: -rw-r--r-- 1 root root 364 2014-02-05 10:45:56.000000000 +0100 /usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf # trackpoint users want wheel emulation Section "InputClass" Identifier "trackpoint catchall" MatchIsPointer "true" MatchProduct "TrackPoint|DualPoint Stick" MatchDevicePath "/dev/input/event*" Option "Emulate3Buttons" "true" Option "EmulateWheel" "true" Option "EmulateWheelButton" "2" Option "XAxisMapping" "6 7" Option "YAxisMapping" "4 5" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/50-synaptics.conf *** ls: -rw-r--r-- 1 root root 1757 2014-04-10 12:04:55.000000000 +0200 /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" # This option is recommend on all Linux systems using evdev, but cannot be # enabled by default. See the following link for details: # http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html MatchDevicePath "/dev/input/event*" EndSection Section "InputClass" Identifier "touchpad ignore duplicates" MatchIsTouchpad "on" MatchOS "Linux" MatchDevicePath "/dev/input/mouse*" Option "Ignore" "on" EndSection # This option enables the bottom right corner to be a right button on # non-synaptics clickpads. # This option is only interpreted by clickpads. Section "InputClass" Identifier "Default clickpad buttons" MatchDriver "synaptics" Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" # To disable the bottom edge area so the buttons only work as buttons, # not for movement, set the AreaBottomEdge # Option "AreaBottomEdge" "82%" EndSection # This option disables software buttons on Apple touchpads. # This option is only interpreted by clickpads. Section "InputClass" Identifier "Disable clickpad buttons on Apple touchpads" MatchProduct "Apple|bcm5974" MatchDriver "synaptics" Option "SoftButtonAreas" "0 0 0 0 0 0 0 0" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/50-vmmouse.conf *** ls: -rw-r--r-- 1 root root 115 2014-02-05 10:49:38.000000000 +0100 /usr/share/X11/xorg.conf.d/50-vmmouse.conf Section "InputClass" Identifier "vmmouse" MatchIsPointer "on" MatchTag "vmmouse" Driver "vmmouse" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/50-wacom.conf *** ls: -rw-r--r-- 1 root root 842 2014-02-05 10:36:36.000000000 +0100 /usr/share/X11/xorg.conf.d/50-wacom.conf Section "InputClass" Identifier "Wacom class" MatchProduct "Wacom|WACOM|Hanwang|PTK-540WL|ISD-V4" MatchDevicePath "/dev/input/event*" Driver "wacom" EndSection Section "InputClass" Identifier "Wacom serial class" MatchProduct "Serial Wacom Tablet" Driver "wacom" EndSection Section "InputClass" Identifier "Wacom serial class identifiers" MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9" Driver "wacom" EndSection # Waltop tablets Section "InputClass" Identifier "Waltop class" MatchProduct "WALTOP" MatchIsTablet "on" MatchDevicePath "/dev/input/event*" Driver "wacom" EndSection # N-Trig Duosense Electromagnetic Digitizer Section "InputClass" Identifier "Wacom N-Trig class" MatchProduct "HID 1b96:0001|N-Trig Pen" MatchDevicePath "/dev/input/event*" Driver "wacom" Option "Button2" "3" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf *** ls: -rw-r--r-- 1 root root 590 2014-04-10 12:04:33.000000000 +0200 /usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf Section "InputClass" Identifier "Dell Inspiron embedded buttons quirks" MatchTag "inspiron_1011|inspiron_1012" MatchDevicePath "/dev/input/event*" Driver "synaptics" Option "JumpyCursorThreshold" "90" EndSection Section "InputClass" Identifier "Dell Inspiron quirks" MatchTag "inspiron_1120" MatchDevicePath "/dev/input/event*" Driver "synaptics" Option "JumpyCursorThreshold" "250" EndSection Section "InputClass" Identifier "HP Mininote quirks" MatchTag "mininote_1000" MatchDevicePath "/dev/input/event*" Driver "synaptics" Option "JumpyCursorThreshold" "20" EndSection ____________________________________________ *** /usr/share/X11/xorg.conf.d/glamoregl.conf *** ls: lrwxrwxrwx 1 root root 29 2014-08-11 20:34:29.996863589 +0200 /usr/share/X11/xorg.conf.d/glamoregl.conf -> /etc/alternatives/glamor_conf Section "Module" Disable "glamoregl" EndSection ____________________________________________ Skipping ldd output (glxinfo not found) ____________________________________________ /usr/bin/lspci -d "10de:*" -v -xxx 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) Subsystem: NVIDIA Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00: de 10 ea 03 06 00 b0 00 a1 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 84 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: de 10 84 cb 08 dc 20 02 20 00 11 11 d0 00 00 00 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 00 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00 90: 78 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8 e0: 00 00 e0 fe 00 00 00 00 07 00 00 00 20 10 00 00 f0: f0 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at d000 [size=256] 00: de 10 e0 03 0f 00 a0 00 a2 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 01 d0 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 65 15 07 34 00 00 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 05 2f 00 fc 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 ff ff c5 80 00 00 00 20 44 19 00 00 00 00 80: 09 d0 00 10 02 28 d0 00 f0 00 40 01 ff 00 00 00 90: 00 08 00 00 00 00 00 00 21 65 08 74 b9 0c 00 d0 a0: 01 00 10 c1 00 00 00 00 00 00 00 00 00 00 00 00 b0: 90 02 a0 02 00 08 5f 08 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at f400 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus 00: de 10 eb 03 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 1c 00 00 01 f4 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00 40: 65 15 07 34 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00 70: 00 00 00 00 00 00 c8 fe 00 00 fe fe 01 20 00 00 80: 00 10 fe fe 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00 d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00 e0: 88 10 04 00 04 40 02 07 80 12 04 20 41 44 44 11 f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: 66MHz, fast devsel 00: de 10 f5 03 00 04 a0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 10 02 80 10 10 00 10 10 50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00 60: 0b 00 00 00 c0 1c 52 06 21 00 10 0a 00 00 63 00 70: 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 40 00 00 00 00 00 a0 18 00 00 90: 00 00 00 00 00 00 00 12 20 81 04 00 00 00 00 00 a0: 00 14 00 06 00 00 00 00 00 00 00 00 01 00 00 00 b0: 00 00 00 00 42 80 30 04 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci-pci 00: de 10 f1 03 07 00 b0 00 a3 10 03 0c 00 00 80 00 10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 65 15 07 34 01 00 02 fe 00 00 00 00 00 00 00 00 50: 08 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci-pci 00: de 10 f2 03 06 00 b0 00 a3 20 03 0c 00 00 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01 40: 65 15 07 34 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 c3 13 0f 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 e4 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 b0: 33 00 11 22 44 00 00 00 ff 00 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd800000-fd8fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00: de 10 f3 03 07 00 b0 00 a1 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 22 20: f0 fd f0 fd 80 fd 80 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02 40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00 50: 00 00 00 00 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 02 00 00 58 56 00 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 8108 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe028000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel 00: de 10 f0 03 06 00 b0 00 a2 00 03 04 00 00 80 00 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 08 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 02 05 40: 65 15 08 81 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3407 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd 00: de 10 ec 03 05 00 b0 00 a2 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f0 00 00 00 00 00 00 00 00 00 00 65 15 07 34 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 65 15 07 34 01 00 02 00 00 00 00 00 00 00 00 00 50: 02 f0 00 00 00 00 00 00 99 99 99 99 aa 00 a8 a8 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 2505 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 43 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] I/O ports at ec00 [size=8] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: forcedeth 00: de 10 ef 03 07 04 b0 00 a2 00 80 06 00 00 00 00 10: 00 d0 02 fe 01 ec 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 05 25 30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 01 14 40: 65 15 05 25 01 50 02 fe 00 01 00 00 08 00 00 20 50: 05 6c 87 01 0c 20 e0 fe 00 00 00 00 b1 41 00 00 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 42 01 00 00 00 00 00 00 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5405 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at d800 [size=16] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00: de 10 f6 03 07 00 b0 00 a2 85 01 01 00 00 80 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 d8 00 00 00 c0 02 fe 00 00 00 00 65 15 05 54 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 65 15 05 54 01 b0 02 00 00 00 00 00 00 00 00 00 50: 0f 68 08 00 00 00 00 00 a8 20 a8 20 66 00 20 20 60: 00 c6 00 c7 41 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 81 80: 00 00 00 c0 00 70 98 1f 00 00 08 a0 00 c0 b0 36 90: 00 00 10 90 00 00 00 00 06 00 06 10 f6 03 01 01 a0: 08 00 00 10 80 00 00 00 00 00 00 00 33 31 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 08 00 00 77 00 08 03 00 08 00 00 44 00 08 00 00 e0: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport 00: de 10 e8 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 b1 b1 00 00 20: e0 fd e0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 30 28 00 00 01 3d 11 00 90: 00 00 01 11 80 25 08 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport 00: de 10 e9 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 a1 a1 00 00 20: c0 fd c0 fd b1 fd b1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 71 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 30 28 00 00 11 3c 11 01 90: 00 00 11 10 00 05 10 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport 00: de 10 e9 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 91 91 00 00 20: a0 fd a0 fd 91 fd 91 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 81 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 30 28 00 00 11 3c 11 02 90: 00 00 11 10 00 05 18 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1405 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at c0000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia 00: de 10 d0 03 07 00 b0 00 a2 00 00 03 00 00 00 00 10: 00 00 00 fb 0c 00 00 e0 00 00 00 00 04 00 00 fc 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 05 14 30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00 40: 65 15 05 14 00 00 00 03 01 50 02 00 00 00 00 00 50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 00 1c 04 04 00 00 00 00 00 00 00 00 00 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 00 00 70 01 00 00 00 08 00 00 00 00 ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ____________________________________________ /usr/bin/lspci -d "10b5:*" -v -xxx ____________________________________________ /usr/bin/lspci -t -[0000:00]-+-00.0 +-01.0 +-01.1 +-01.2 +-02.0 +-02.1 +-04.0-[01]-- +-05.0 +-06.0 +-07.0 +-08.0 +-09.0-[02]-- +-0b.0-[03]-- +-0c.0-[04]-- +-0d.0 +-18.0 +-18.1 +-18.2 +-18.3 \-18.4 ____________________________________________ /usr/bin/lspci -nn 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03ea] (rev a1) 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e0] (rev a2) 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2) 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03f5] (rev a2) 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller [10de:03f1] (rev a3) 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller [10de:03f2] (rev a3) 00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev a1) 00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2) 00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2) 00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2) 00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) 00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) 00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) 00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2) 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201] 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202] 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203] 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204] ____________________________________________ /usr/bin/lsusb Bus 001 Device 005: ID 048d:1345 Integrated Technology Express, Inc. Multi Cardreader Bus 001 Device 003: ID 046d:0825 Logitech, Inc. Webcam C270 Bus 001 Device 002: ID 03f0:3d17 Hewlett-Packard LaserJet P1005 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ____________________________________________ /usr/sbin/dmidecode # dmidecode 2.12 SMBIOS 2.5 present. 45 structures occupying 2191 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 09/03/2009 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: BIOSTAR Group Product Name: N61PC-M2S Version: Serial Number: UUID: 0030672F-915E-0000-0807-060504030201 Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: BIOSTAR Group Product Name: N61PC-M2S Version: Serial Number: OEM Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: BIOSTAR Group Type: Desktop Lock: Not Present Version: N61PC-M2S Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: Socket AM2 Type: Central Processor Family: Pentium Pro Manufacturer: AMD ID: 62 0F 10 00 FF FB 8B 17 Signature: Type 0, Family 16, Model 6, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD Athlon(tm) II X2 215 Processor Voltage: 1.3 V External Clock: 200 MHz Max Speed: 2700 MHz Current Speed: 2700 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 16384 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: Standard DIMM Memory Module Voltage: 2.9 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 Current Speed: Unknown Type: Other Unknown EDO Installed Size: 1024 MB (Single-bank Connection) Enabled Size: 1024 MB (Single-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: 2 3 Current Speed: Unknown Type: Other Unknown EDO Installed Size: 2048 MB (Double-bank Connection) Enabled Size: 2048 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: Unknown Type: Other Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: A3 Bank Connections: None Current Speed: Unknown Type: Other Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0015, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Express Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Express Current Usage: Available Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0018, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Express Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 0 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001A, DMI type 9, 13 bytes System Slot Information Designation: PCI5 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 0 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: PCI6 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 0 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001C, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x001E, DMI type 17, 27 bytes Memory Device Array Handle: 0x001D Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: DDR2 Type Detail: None Speed: 667 MHz Manufacturer: 0000000000000000 Serial Number: 00000000 Asset Tag: None Part Number: <BAD INDEX> Handle 0x1F1B, DMI type 0, 17 bytes BIOS Information Invalid entry length (2). DMI table is broken! Stop. ____________________________________________ /sbin/modinfo nvidia | grep vermagic ____________________________________________ Scanning kernel log files for NVRM messages: /var/log/messages is not readable /var/log/kernel.log is not readable ____________________________________________ dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-33-generic (buildd@klock) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #58-Ubuntu SMP Tue Jul 29 16:47:17 UTC 2014 (Ubuntu 3.13.0-33.58-generic 3.13.11.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7edffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7ee0000-0x00000000b7ee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7ee3000-0x00000000b7eeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7ef0000-0x00000000b7efffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: BIOSTAR Group N61PC-M2S/N61PC-M2S, BIOS 6.00 PG 09/03/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xb7ee0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f3a00-0x000f3a0f] mapped at [c00f3a00] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c3e000-0x36e16fff] [ 0.000000] ACPI: RSDP 000f7e30 000014 (v00 Nvidia) [ 0.000000] ACPI: RSDT b7ee3000 000038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: FACP b7ee3080 000074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT b7ee3100 0058B6 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS b7ee0000 000040 [ 0.000000] ACPI: SSDT b7ee8a80 0008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET b7ee9380 000038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG b7ee93c0 00003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: APIC b7ee89c0 000098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2050MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0xb7edffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xb7edffff] [ 0.000000] On node 0 totalpages: 753278 [ 0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map f453e020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4102 pages used for memmap [ 0.000000] HighMem zone: 525026 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb4000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 751494 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-33-generic root=UUID=8276b7e1-9c42-47dc-bdf4-98ee6a40f127 ro recovery nomodeset [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6027000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:000b7ee0) [ 0.000000] Memory: 2952388K/3013112K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 60724K reserved, 2100104K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b4000 - 0xc1a8e000 ( 872 kB) [ 0.000000] .data : 0xc1660572 - 0xc19b3e80 (3406 kB) [ 0.000000] .text : 0xc1000000 - 0xc1660572 (6529 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2712.673 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5425.34 BogoMIPS (lpj=10850692) [ 0.000122] pid_max: default: 32768 minimum: 301 [ 0.000212] Security Framework initialized [ 0.000285] AppArmor: AppArmor initialized [ 0.000343] Yama: becoming mindful. [ 0.000449] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000511] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000761] Initializing cgroup subsys memory [ 0.000825] Initializing cgroup subsys devices [ 0.000884] Initializing cgroup subsys freezer [ 0.000943] Initializing cgroup subsys blkio [ 0.001002] Initializing cgroup subsys perf_event [ 0.001062] Initializing cgroup subsys hugetlb [ 0.001140] CPU: Physical Processor ID: 0 [ 0.001198] CPU: Processor Core ID: 0 [ 0.001269] mce: CPU supports 6 MCE banks [ 0.001331] LVT offset 0 assigned for vector 0xf9 [ 0.001392] process: using AMD E400 aware idle routine [ 0.001456] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.001456] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.001456] tlb_flushall_shift: 4 [ 0.001826] Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000) [ 0.002799] ACPI: Core revision 20131115 [ 0.006741] ACPI: All ACPI Tables successfully acquired [ 0.007848] ftrace: allocating 27783 entries in 55 pages [ 0.017178] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.017779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057472] smpboot: CPU0: AMD Athlon(tm) II X2 215 Processor (fam: 10, model: 06, stepping: 02) [ 0.165040] Performance Events: AMD PMU driver. [ 0.165145] ... version: 0 [ 0.165203] ... bit width: 48 [ 0.165260] ... generic registers: 4 [ 0.165318] ... value mask: 0000ffffffffffff [ 0.165377] ... max period: 00007fffffffffff [ 0.165436] ... fixed-purpose events: 0 [ 0.165494] ... event mask: 000000000000000f [ 0.166993] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.167141] CPU 1 irqstacks, hard=f7100000 soft=f7102000 [ 0.167143] x86: Booting SMP configuration: [ 0.177290] Initializing CPU#1 [ 0.167201] .... node #0, CPUs: #1 [ 0.180375] x86: Booted up 1 node, 2 CPUs [ 0.180542] smpboot: Total of 2 processors activated (10850.69 BogoMIPS) [ 0.181193] devtmpfs: initialized [ 0.181402] EVM: security.selinux [ 0.181459] EVM: security.SMACK64 [ 0.181516] EVM: security.ima [ 0.181572] EVM: security.capability [ 0.181718] PM: Registering ACPI NVS region [mem 0xb7ee0000-0xb7ee2fff] (12288 bytes) [ 0.182739] pinctrl core: initialized pinctrl subsystem [ 0.182869] regulator-dummy: no parameters [ 0.182962] RTC time: 13:08:20, date: 08/14/14 [ 0.183057] NET: Registered protocol family 16 [ 0.183215] EISA bus registered [ 0.183273] cpuidle: using governor ladder [ 0.183331] cpuidle: using governor menu [ 0.183391] node 0 link 0: io port [9000, ffff] [ 0.183394] TOM: 00000000c0000000 aka 3072M [ 0.183453] Fam 10h mmconf [mem 0xf0000000-0xf00fffff] [ 0.183455] node 0 link 0: mmio [a0000, bffff] [ 0.183458] node 0 link 0: mmio [c0000000, efffffff] [ 0.183460] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.183462] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff] [ 0.183465] bus: [bus 00-04] on node 0 link 0 [ 0.183467] bus: 00 [io 0x0000-0xffff] [ 0.183468] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.183470] bus: 00 [mem 0xc0000000-0xefffffff] [ 0.183471] bus: 00 [mem 0xf0400000-0xfcffffffff] [ 0.183472] bus: 00 [mem 0xf0100000-0xf03fffff] [ 0.183522] ACPI: bus type PCI registered [ 0.183581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.183702] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.183777] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.183838] PCI: Using MMCONFIG for extended config space [ 0.183897] PCI: Using configuration type 1 for base access [ 0.184028] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.184089] mtrr: probably your BIOS does not setup all CPUs. [ 0.184148] mtrr: corrected configuration. [ 0.185049] bio: create slab <bio-0> at 0 [ 0.185279] ACPI: Added _OSI(Module Device) [ 0.185338] ACPI: Added _OSI(Processor Device) [ 0.185396] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.185455] ACPI: Added _OSI(Processor Aggregator Device) [ 0.191705] ACPI: Interpreter enabled [ 0.191773] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.191935] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.192101] ACPI: (supports S0 S1 S4 S5) [ 0.192159] ACPI: Using IOAPIC for interrupt routing [ 0.192237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.192416] ACPI: No dock devices found. [ 0.198284] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04]) [ 0.198350] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.198537] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PCIeCapability] [ 0.198665] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.198739] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.198811] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER] [ 0.198872] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.200063] PCI host bridge to bus 0000:00 [ 0.200122] pci_bus 0000:00: root bus resource [bus 00-04] [ 0.200183] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.200244] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.200305] pci_bus 0000:00: root bus resource [io 0x9000-0xffff] [ 0.200368] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.200429] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80] [ 0.200490] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff] [ 0.200552] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.200613] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff] [ 0.200675] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff] [ 0.200756] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000 [ 0.200988] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100 [ 0.201002] pci 0000:00:01.0: reg 0x18: [io 0x1d00-0x1dff] [ 0.201084] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.201095] pci 0000:00:01.1: reg 0x10: [io 0xfc00-0xfc3f] [ 0.201110] pci 0000:00:01.1: reg 0x20: [io 0x1c00-0x1c3f] [ 0.201115] pci 0000:00:01.1: reg 0x24: [io 0xf400-0xf43f] [ 0.201142] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.201212] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.201296] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.201305] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff] [ 0.201338] pci 0000:00:02.0: supports D1 D2 [ 0.201339] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.201386] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.201471] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.201481] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff] [ 0.201521] pci 0000:00:02.1: supports D1 D2 [ 0.201523] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.201579] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.201670] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.201741] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.201827] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.201838] pci 0000:00:05.0: reg 0x10: [mem 0xfe028000-0xfe02bfff] [ 0.201879] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.201926] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.202015] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.202036] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f] [ 0.202119] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.202128] pci 0000:00:07.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.202133] pci 0000:00:07.0: reg 0x14: [io 0xec00-0xec07] [ 0.202166] pci 0000:00:07.0: supports D1 D2 [ 0.202168] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202215] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.202298] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.202306] pci 0000:00:08.0: reg 0x10: [io 0x09f0-0x09f7] [ 0.202310] pci 0000:00:08.0: reg 0x14: [io 0x0bf0-0x0bf3] [ 0.202314] pci 0000:00:08.0: reg 0x18: [io 0x0970-0x0977] [ 0.202319] pci 0000:00:08.0: reg 0x1c: [io 0x0b70-0x0b73] [ 0.202323] pci 0000:00:08.0: reg 0x20: [io 0xd800-0xd80f] [ 0.202327] pci 0000:00:08.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff] [ 0.202416] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.202444] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202490] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.202576] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.202602] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202647] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.202730] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.202755] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202801] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 0.202885] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000 [ 0.202892] pci 0000:00:0d.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.202897] pci 0000:00:0d.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.202903] pci 0000:00:0d.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.202909] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.202986] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.203057] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.203120] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.203187] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.203252] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.203372] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.203435] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.203438] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.203441] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref] [ 0.203443] pci 0000:00:04.0: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.203445] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.203447] pci 0000:00:04.0: bridge window [io 0x9000-0xffff] (subtractive decode) [ 0.203449] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.203451] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80] (subtractive decode) [ 0.203453] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode) [ 0.203455] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.203456] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode) [ 0.203458] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode) [ 0.203487] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.203547] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.203550] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.203553] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.203579] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.203640] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.203642] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.203645] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.203671] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.203731] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff] [ 0.203734] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.203737] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.203745] pci_bus 0000:00: on NUMA node 0 [ 0.204128] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.204715] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.205296] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.205877] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.206459] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.207040] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.207621] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.208202] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.208786] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15) [ 0.209272] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.209854] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.210339] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.210826] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.211319] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.211901] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.212388] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.212878] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.213459] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.213949] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.214561] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.214899] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.215237] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.215574] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.215911] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.216248] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.216587] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.216924] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.217261] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0 [ 0.217641] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.218021] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.218401] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled. [ 0.218825] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0 [ 0.219204] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0 [ 0.219584] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.219964] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.220390] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.220815] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0 [ 0.221108] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled. [ 0.221510] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.221660] ACPI: \_SB_.PCI0: notify handler is installed [ 0.221696] Found 1 acpi root devices [ 0.221836] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.221909] vgaarb: loaded [ 0.221965] vgaarb: bridge control possible 0000:00:0d.0 [ 0.222195] SCSI subsystem initialized [ 0.222317] libata version 3.00 loaded. [ 0.222340] ACPI: bus type USB registered [ 0.222414] usbcore: registered new interface driver usbfs [ 0.222480] usbcore: registered new interface driver hub [ 0.222596] usbcore: registered new device driver usb [ 0.222781] PCI: Using ACPI for IRQ routing [ 0.224265] PCI: pci_cache_line_size set to 64 bytes [ 0.224278] pci 0000:00:01.0: no compatible bridge window for [io 0x1d00-0x1dff] [ 0.224375] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.224377] e820: reserve RAM buffer [mem 0xb7ee0000-0xb7ffffff] [ 0.224469] NetLabel: Initializing [ 0.224526] NetLabel: domain hash size = 128 [ 0.224584] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.224652] NetLabel: unlabeled traffic allowed by default [ 0.224816] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.224882] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.225124] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.227320] Switched to clocksource hpet [ 0.232564] AppArmor: AppArmor Filesystem Enabled [ 0.232656] pnp: PnP ACPI init [ 0.232728] ACPI: bus type PNP registered [ 0.232942] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.233004] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.233065] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.233126] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.233186] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.233247] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.233308] system 00:00: [io 0x2000-0x207f] has been reserved [ 0.233369] system 00:00: [io 0x2080-0x20ff] has been reserved [ 0.233431] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233475] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233550] pnp 00:01: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233625] pnp 00:01: disabling [io 0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233700] pnp 00:01: disabling [io 0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233775] pnp 00:01: disabling [io 0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233850] pnp 00:01: disabling [io 0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.233925] pnp 00:01: disabling [io 0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.234000] pnp 00:01: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.234075] pnp 00:01: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff] [ 0.234179] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.234240] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.234302] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.234362] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.234423] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234433] pnp 00:02: [dma 4] [ 0.234449] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.234517] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.234552] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.234571] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.234597] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.234742] pnp 00:07: [dma 2] [ 0.234767] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.234993] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.235111] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.235152] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.235643] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.235705] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235801] system 00:0c: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.235863] system 00:0c: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.235925] system 00:0c: [mem 0xb7ee0000-0xb7efffff] could not be reserved [ 0.235988] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.236049] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.236111] system 00:0c: [mem 0x00100000-0xb7edffff] could not be reserved [ 0.236174] system 00:0c: [mem 0xb8000000-0xbfffffff] has been reserved [ 0.236235] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.236298] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.236359] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.236421] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.236483] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.236545] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.236607] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.236614] pnp: PnP ACPI: found 13 devices [ 0.236672] ACPI: bus type PNP unregistered [ 0.236731] PnPBIOS: Disabled by ACPI PNP [ 0.273116] pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 0.273190] pci 0000:00:01.0: BAR 2: assigned [io 0xd000-0xd0ff] [ 0.273253] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.273313] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.273375] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.273438] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref] [ 0.273511] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.273571] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.273632] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.273694] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.273768] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.273827] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.276532] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.276594] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.276667] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.276727] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff] [ 0.276789] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.276851] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.276924] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.276926] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.276928] pci_bus 0000:00: resource 6 [io 0x9000-0xffff] [ 0.276930] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df] [ 0.276932] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80] [ 0.276934] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff] [ 0.276936] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff] [ 0.276938] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff] [ 0.276940] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff] [ 0.276942] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.276944] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.276946] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref] [ 0.276948] pci_bus 0000:01: resource 4 [io 0x0000-0x03af] [ 0.276949] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7] [ 0.276951] pci_bus 0000:01: resource 6 [io 0x9000-0xffff] [ 0.276953] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df] [ 0.276955] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80] [ 0.276957] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff] [ 0.276959] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff] [ 0.276961] pci_bus 0000:01: resource 11 [mem 0xc0000000-0xefffffff] [ 0.276963] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff] [ 0.276965] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.276967] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.276969] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.276971] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.276972] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.276974] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.276976] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.276978] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.276980] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.277012] NET: Registered protocol family 2 [ 0.277190] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.277268] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.277356] TCP: Hash tables configured (established 8192 bind 8192) [ 0.277438] TCP: reno registered [ 0.277496] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.277562] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.277671] NET: Registered protocol family 1 [ 0.277968] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.347458] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.347637] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.347742] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.347855] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.347966] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.348081] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.348200] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.348322] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.348386] pci 0000:00:0d.0: Boot video device [ 0.348393] PCI: CLS 64 bytes, default 64 [ 0.348447] Trying to unpack rootfs image as initramfs... [ 0.663659] Freeing initrd memory: 18276K (f5c3e000 - f6e17000) [ 0.663860] LVT offset 1 assigned for vector 0x400 [ 0.663927] IBS: LVT offset 1 assigned [ 0.664004] perf: AMD IBS detected (0x0000001f) [ 0.664108] microcode: CPU0: patch_level=0x01000098 [ 0.664174] microcode: CPU1: patch_level=0x01000098 [ 0.664309] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.664382] Scanning for low memory corruption every 60 seconds [ 0.664652] Initialise system trusted keyring [ 0.664750] audit: initializing netlink socket (disabled) [ 0.664821] type=2000 audit(1408021700.560:1): initialized [ 0.686347] bounce pool size: 64 pages [ 0.686418] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.687609] zbud: loaded [ 0.687755] VFS: Disk quotas dquot_6.5.2 [ 0.687867] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.688405] fuse init (API version 7.22) [ 0.688553] msgmni has been set to 1700 [ 0.688669] Key type big_key registered [ 0.689195] Key type asymmetric registered [ 0.689255] Asymmetric key parser 'x509' registered [ 0.689341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.689447] io scheduler noop registered [ 0.689507] io scheduler deadline registered (default) [ 0.689587] io scheduler cfq registered [ 0.689743] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.689782] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.689816] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.689858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.689930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.690032] ipmi message handler version 39.2 [ 0.690149] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.690224] ACPI: Power Button [PWRB] [ 0.690321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.690393] ACPI: Power Button [PWRF] [ 0.690484] ACPI: Fan [FAN] (on) [ 0.690770] ACPI: [Package] has zero elements (f70c4f00) [ 0.690830] ACPI: Invalid passive threshold [ 0.691054] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.691114] ACPI: Thermal Zone [THRM] (40 C) [ 0.691193] GHES: HEST is not enabled! [ 0.691297] isapnp: Scanning for PnP cards... [ 0.698782] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.699857] Linux agpgart interface v0.103 [ 0.701076] brd: module loaded [ 0.701670] loop: module loaded [ 0.702068] libphy: Fixed MDIO Bus: probed [ 0.702202] tun: Universal TUN/TAP device driver, 1.6 [ 0.702261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.702348] PPP generic driver version 2.4.2 [ 0.702435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.702498] ehci-pci: EHCI PCI platform driver [ 0.702716] ehci-pci 0000:00:02.1: EHCI Host Controller [ 0.702781] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.702859] ehci-pci 0000:00:02.1: debug port 1 [ 0.702947] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 0.702968] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000 [ 0.714710] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.714841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.714904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.714975] usb usb1: Product: EHCI Host Controller [ 0.715035] usb usb1: Manufacturer: Linux 3.13.0-33-generic ehci_hcd [ 0.715096] usb usb1: SerialNumber: 0000:00:02.1 [ 0.715260] hub 1-0:1.0: USB hub found [ 0.715322] hub 1-0:1.0: 8 ports detected [ 0.715529] ehci-platform: EHCI generic platform driver [ 0.715598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.715658] ohci-pci: OHCI PCI platform driver [ 0.715826] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 0.715890] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.715986] ohci-pci 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.772656] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.772722] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.772793] usb usb2: Product: OHCI PCI host controller [ 0.772853] usb usb2: Manufacturer: Linux 3.13.0-33-generic ohci_hcd [ 0.772915] usb usb2: SerialNumber: 0000:00:02.0 [ 0.773091] hub 2-0:1.0: USB hub found [ 0.773155] hub 2-0:1.0: 8 ports detected [ 0.773352] ohci-platform: OHCI generic platform driver [ 0.773422] uhci_hcd: USB Universal Host Controller Interface driver [ 0.773549] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.774043] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.774106] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.774241] mousedev: PS/2 mouse device common for all mice [ 0.774387] rtc_cmos 00:04: RTC can wake from S4 [ 0.774591] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.774688] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.774818] device-mapper: uevent: version 1.0.3 [ 0.774917] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.775003] platform eisa.0: Probing EISA bus 0 [ 0.775063] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.775125] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.775186] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.775260] platform eisa.0: EISA: Detected 0 cards [ 0.775324] cpufreq-nforce2: No nForce2 chipset. [ 0.775385] ledtrig-cpu: registered to indicate activity on CPUs [ 0.775552] TCP: cubic registered [ 0.775686] NET: Registered protocol family 10 [ 0.775903] NET: Registered protocol family 17 [ 0.775971] Key type dns_resolver registered [ 0.776152] Using IPI No-Shortcut mode [ 0.776263] Loading compiled-in X.509 certificates [ 0.779447] Loaded X.509 cert 'Magrathea: Glacier signing key: b35c17000350bf67b548787ad182d39cde7acf65' [ 0.779532] registered taskstats version 1 [ 0.787574] Key type trusted registered [ 0.794822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.799692] Key type encrypted registered [ 0.815486] AppArmor: AppArmor sha1 policy hashing enabled [ 0.815551] IMA: No TPM chip found, activating TPM-bypass! [ 0.815781] regulator-dummy: disabling [ 0.815875] Magic number: 10:506:129 [ 0.815997] acpi PNP0C02:01: hash matches [ 0.816059] acpi device:04: hash matches [ 0.816161] rtc_cmos 00:04: setting system clock to 2014-08-14 13:08:21 UTC (1408021701) [ 0.816308] acpi-cpufreq: overriding BIOS provided _PSD data [ 0.816420] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.816480] EDD information not available. [ 0.816564] PM: Hibernation image not present or could not be loaded. [ 1.044695] isapnp: No Plug & Play device found [ 1.045092] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000) [ 1.045192] Write protecting the kernel text: 6532k [ 1.045310] Write protecting the kernel read-only data: 2764k [ 1.045370] NX-protecting the kernel data: 5756k [ 1.058598] systemd-udevd[94]: starting version 204 [ 1.083986] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.084268] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 1.110169] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.118239] FDC 0 is a post-1991 82077 [ 1.243689] usb 1-1: New USB device found, idVendor=03f0, idProduct=3d17 [ 1.243756] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.243818] usb 1-1: Product: HP LaserJet P1005 [ 1.243877] usb 1-1: Manufacturer: Hewlett-Packard [ 1.243936] usb 1-1: SerialNumber: BB0DE9E [ 1.353886] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.488412] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 1.606249] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:30:67:2f:91:5e [ 1.606327] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.606432] pata_amd 0000:00:06.0: version 0.4.1 [ 1.606987] scsi0 : pata_amd [ 1.609712] scsi1 : pata_amd [ 1.609799] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.609861] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.609942] sata_nv 0000:00:08.0: version 3.5 [ 1.610116] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.610469] scsi2 : sata_nv [ 1.610580] scsi3 : sata_nv [ 1.610668] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 1.610730] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 1.661435] tsc: Refined TSC clocksource calibration: 2712.499 MHz [ 1.702104] usb 1-2: New USB device found, idVendor=046d, idProduct=0825 [ 1.702170] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 1.702232] usb 1-2: SerialNumber: 734D6B60 [ 1.776304] ata2: port disabled--ignoring [ 2.029577] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.072913] usb 1-5: new high-speed USB device number 5 using ehci-pci [ 2.076873] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.085163] ata3.00: ATA-8: STM3250318AS, CC38, max UDMA/133 [ 2.085228] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.101132] ata3.00: configured for UDMA/133 [ 2.101347] scsi 2:0:0:0: Direct-Access ATA STM3250318AS CC38 PQ: 0 ANSI: 5 [ 2.101597] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.101602] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.101790] sd 2:0:0:0: [sda] Write Protect is off [ 2.101852] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.101887] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.127787] sda: sda1 sda2 < sda5 sda6 > [ 2.128259] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.422508] usb 1-5: New USB device found, idVendor=048d, idProduct=1345 [ 2.422575] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.422637] usb 1-5: Product: Mass Storage Device [ 2.422696] usb 1-5: Manufacturer: Generic [ 2.422754] usb 1-5: SerialNumber: 000000000000100 [ 2.556220] usb-storage 1-5:1.0: USB Mass Storage device detected [ 2.556360] scsi4 : usb-storage 1-5:1.0 [ 2.556482] usbcore: registered new interface driver usb-storage [ 2.568229] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.576412] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100 [ 2.592376] ata4.00: configured for UDMA/100 [ 2.596574] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5 [ 2.599822] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.599899] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.600125] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.600211] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.660151] Switched to clocksource tsc [ 2.724010] usb 2-4: new full-speed USB device number 2 using ohci-pci [ 2.922617] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.922684] EXT4-fs (sda1): write access will be enabled during recovery [ 3.048608] usb 2-4: New USB device found, idVendor=0a12, idProduct=0001 [ 3.048674] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.174905] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.175066] EXT4-fs (sda1): 3 orphan inodes deleted [ 3.175125] EXT4-fs (sda1): recovery complete [ 3.241406] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.572200] scsi 4:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2 [ 3.797869] random: init urandom read with 92 bits of entropy available [ 4.359501] scsi 4:0:0:1: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2 [ 4.376857] scsi 4:0:0:2: Direct-Access Generic SDXC/MMC 0.00 PQ: 0 ANSI: 2 [ 4.394209] scsi 4:0:0:3: Direct-Access Generic MS/MS-Pro/HG 0.00 PQ: 0 ANSI: 2 [ 4.394556] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.394758] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 4.394919] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 4.395076] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 4.397912] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 4.398287] sd 4:0:0:2: [sdd] 15759360 512-byte logical blocks: (8.06 GB/7.51 GiB) [ 4.399553] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.400923] sd 4:0:0:2: [sdd] Write Protect is off [ 4.400991] sd 4:0:0:2: [sdd] Mode Sense: 03 00 00 00 [ 4.401419] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 4.402377] sd 4:0:0:2: [sdd] No Caching mode page found [ 4.402442] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 4.408423] sd 4:0:0:2: [sdd] No Caching mode page found [ 4.408488] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 4.410288] random: nonblocking pool is initialized [ 4.410294] sdd: sdd1 [ 4.412662] sd 4:0:0:2: [sdd] No Caching mode page found [ 4.412727] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 4.412789] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 4.501972] systemd-udevd[215]: starting version 204 [ 4.770779] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 4.770861] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 4.901874] parport_pc 00:08: reported by Plug and Play ACPI [ 4.901982] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.182028] WARNING! power/level is deprecated; use power/control instead [ 5.355846] Bluetooth: Core ver 2.17 [ 5.355928] NET: Registered protocol family 31 [ 5.355986] Bluetooth: HCI device and connection manager initialized [ 5.356053] Bluetooth: HCI socket layer initialized [ 5.356113] Bluetooth: L2CAP socket layer initialized [ 5.356174] Bluetooth: SCO socket layer initialized [ 5.539989] usbcore: registered new interface driver btusb [ 5.640593] kvm: Nested Virtualization enabled [ 5.640657] kvm: Nested Paging enabled [ 5.866380] ppdev: user-space parallel port driver [ 5.962305] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 5.962417] hda_intel: Disabling MSI [ 5.962499] hda-intel 0000:00:05.0: Disabling 64bit DMA [ 5.966999] hda-intel 0000:00:05.0: Enable delay in RIRB handling [ 6.324046] Linux video capture interface: v2.00 [ 6.530785] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line [ 6.530851] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.530915] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 6.530974] mono: mono_out=0x0 [ 6.531031] dig-out=0x21/0x0 [ 6.531087] inputs: [ 6.531143] Rear Mic=0x1a [ 6.531200] Front Mic=0x1e [ 6.531256] Line=0x1b [ 6.834513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.873970] nvidia: module license 'NVIDIA' taints kernel. [ 6.873975] Disabling lock debugging due to kernel taint [ 6.885248] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 7.273923] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 7.274002] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 7.274050] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 7.274100] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 7.274146] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5 [ 7.274712] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21 [ 7.274727] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=none [ 7.274866] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.117 Tue Nov 26 21:36:39 PST 2013 [ 7.698602] set resolution quirk: cval->res = 384 [ 7.698780] usbcore: registered new interface driver snd-usb-audio [ 7.699263] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825) [ 7.714107] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/input/input10 [ 7.714188] usbcore: registered new interface driver uvcvideo [ 7.714190] USB Video Class driver (1.1.1) [ 11.529411] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17 [ 11.529435] usbcore: registered new interface driver usblp [ 12.437997] usblp0: removed [ 20.684977] init: plymouth-upstart-bridge main process (639) terminated with status 1 [ 20.684990] init: plymouth-upstart-bridge main process ended, respawning [ 20.723056] init: plymouth-upstart-bridge main process (673) terminated with status 1 [ 20.723178] init: plymouth-upstart-bridge main process ended, respawning [ 20.740350] init: plymouth-upstart-bridge main process (676) terminated with status 1 [ 20.740362] init: plymouth-upstart-bridge main process ended, respawning [ 20.758613] lp0: using parport0 (interrupt-driven). [ 20.762331] init: plymouth-upstart-bridge main process (682) terminated with status 1 [ 20.762348] init: plymouth-upstart-bridge main process ended, respawning [ 27.059056] init: udev-fallback-graphics main process (856) terminated with status 1 [ 27.657584] Adding 1951860k swap on /dev/sda5. Priority:-1 extents:1 across:1951860k FS [ 28.157209] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 28.409127] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 29.733129] init: failsafe main process (1052) killed by TERM signal [ 29.945711] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.945715] Bluetooth: BNEP filters: protocol multicast [ 29.945724] Bluetooth: BNEP socket layer initialized [ 29.996119] Bluetooth: RFCOMM TTY layer initialized [ 29.996131] Bluetooth: RFCOMM socket layer initialized [ 29.996141] Bluetooth: RFCOMM ver 1.11 [ 30.237466] type=1400 audit(1408021730.956:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1156 comm="apparmor_parser" [ 30.237474] type=1400 audit(1408021730.956:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1156 comm="apparmor_parser" [ 30.237946] type=1400 audit(1408021730.956:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1156 comm="apparmor_parser" [ 30.284972] type=1400 audit(1408021731.004:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1210 comm="apparmor_parser" [ 30.284981] type=1400 audit(1408021731.004:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1210 comm="apparmor_parser" [ 30.285195] type=1400 audit(1408021731.004:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1211 comm="apparmor_parser" [ 30.285205] type=1400 audit(1408021731.004:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1211 comm="apparmor_parser" [ 30.285210] type=1400 audit(1408021731.004:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1211 comm="apparmor_parser" [ 30.285280] type=1400 audit(1408021731.004:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1210 comm="apparmor_parser" [ 30.285693] type=1400 audit(1408021731.004:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1211 comm="apparmor_parser" [ 30.343576] init: cups main process (1196) killed by HUP signal [ 30.343590] init: cups main process ended, respawning [ 30.565472] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X [ 30.565501] forcedeth 0000:00:07.0 eth0: MSI enabled [ 32.405329] init: plymouth-upstart-bridge main process ended, respawning [ 36.023239] init: friendly-recovery post-stop process (633) terminated with status 1 [ 44.270133] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 60.353206] audit_printk_skb: 132 callbacks suppressed [ 60.353212] type=1400 audit(1408021760.399:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2765 comm="apparmor_parser" [ 60.353219] type=1400 audit(1408021760.399:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2765 comm="apparmor_parser" [ 60.353694] type=1400 audit(1408021760.399:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2765 comm="apparmor_parser" ____________________________________________ Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.8/lto-wrapper Target: i686-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.2-19ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-i386/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-i386 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-i386 --with-arch-directory=i386 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-targets=all --enable-multiarch --disable-werror --with-arch-32=i686 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu Thread model: posix gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ____________________________________________ xset -q: Keyboard Control: auto repeat: on key click percent: 0 LED mask: 00000002 XKB indicators: 00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off 03: Compose: off 04: Kana: off 05: Sleep: off 06: Suspend: off 07: Mute: off 08: Misc: off 09: Mail: off 10: Charging: off 11: Shift Lock: off 12: Group 2: off 13: Mouse Keys: off auto repeat delay: 500 repeat rate: 33 auto repeating keys: 00ffffffdffffbbf fadfffefffedffff 9fffffffffffffff fff7ffffffffffff bell percent: 50 bell pitch: 400 bell duration: 100 Pointer Control: acceleration: 2/1 threshold: 4 Screen Saver: prefer blanking: yes allow exposures: yes timeout: 0 cycle: 0 Colors: default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffffff Font Path: /usr/share/fonts/X11/misc,/usr/share/fonts/X11/Type1,built-ins DPMS (Energy Star): Standby: 0 Suspend: 0 Off: 0 DPMS is Enabled Monitor is On ____________________________________________ nvidia-settings -q all: ERROR: Error querying target relations Attributes queryable via sandra-desktop:0.0: Attribute 'OperatingSystem' (sandra-desktop:0.0): 0. The valid values for 'OperatingSystem' are in the range 0 - 2 (inclusive). 'OperatingSystem' is a read-only attribute. 'OperatingSystem' can use the following target types: X Screen, GPU. Attribute 'NvidiaDriverVersion' (sandra-desktop:0.0): 304.117 'NvidiaDriverVersion' is a string attribute. 'NvidiaDriverVersion' is a read-only attribute. 'NvidiaDriverVersion' can use the following target types: X Screen, GPU. Attribute 'NvControlVersion' (sandra-desktop:0.0): 1.28 'NvControlVersion' is a string attribute. 'NvControlVersion' is a read-only attribute. 'NvControlVersion' can use the following target types: X Screen. Attribute 'GLXServerVersion' (sandra-desktop:0.0): 1.4 'GLXServerVersion' is a string attribute. 'GLXServerVersion' is a read-only attribute. 'GLXServerVersion' can use the following target types: X Screen. Attribute 'GLXClientVersion' (sandra-desktop:0.0): 1.4 'GLXClientVersion' is a string attribute. 'GLXClientVersion' is a read-only attribute. 'GLXClientVersion' can use the following target types: X Screen. Attribute 'OpenGLVersion' (sandra-desktop:0.0): 2.1.2 NVIDIA 304.117 'OpenGLVersion' is a string attribute. 'OpenGLVersion' is a read-only attribute. 'OpenGLVersion' can use the following target types: X Screen. Attribute 'XRandRVersion' (sandra-desktop:0.0): 1.4 'XRandRVersion' is a string attribute. 'XRandRVersion' is a read-only attribute. 'XRandRVersion' can use the following target types: X Screen. Attribute 'XF86VidModeVersion' (sandra-desktop:0.0): 2.2 'XF86VidModeVersion' is a string attribute. 'XF86VidModeVersion' is a read-only attribute. 'XF86VidModeVersion' can use the following target types: X Screen. Attribute 'XvVersion' (sandra-desktop:0.0): 2.2 'XvVersion' is a string attribute. 'XvVersion' is a read-only attribute. 'XvVersion' can use the following target types: X Screen. Attribute 'TwinView' (sandra-desktop:0.0): 0. 'TwinView' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'TwinView' is a read-only attribute. 'TwinView' can use the following target types: X Screen. Attribute 'ConnectedDisplays' (sandra-desktop:0.0): 0x00000001. 'ConnectedDisplays' is a bitmask attribute. 'ConnectedDisplays' is a read-only attribute. 'ConnectedDisplays' can use the following target types: X Screen, GPU. Attribute 'EnabledDisplays' (sandra-desktop:0.0): 0x00000001. 'EnabledDisplays' is a bitmask attribute. 'EnabledDisplays' is a read-only attribute. 'EnabledDisplays' can use the following target types: X Screen, GPU. Attribute 'AssociatedDisplays' (sandra-desktop:0.0): 0x00000001. 'AssociatedDisplays' is a bitmask attribute. 'AssociatedDisplays' can use the following target types: X Screen. Attribute 'InitialPixmapPlacement' (sandra-desktop:0.0): 1. The valid values for 'InitialPixmapPlacement' are in the range 0 - 4 (inclusive). 'InitialPixmapPlacement' can use the following target types: X Screen. Attribute 'MultiGpuDisplayOwner' (sandra-desktop:0.0): 0. 'MultiGpuDisplayOwner' is an integer attribute. 'MultiGpuDisplayOwner' is a read-only attribute. 'MultiGpuDisplayOwner' can use the following target types: X Screen. Attribute 'GlyphCache' (sandra-desktop:0.0): 1. 'GlyphCache' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'GlyphCache' can use the following target types: X Screen. Attribute 'Depth30Allowed' (sandra-desktop:0.0): 0. 'Depth30Allowed' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'Depth30Allowed' is a read-only attribute. 'Depth30Allowed' can use the following target types: X Screen, GPU. Attribute 'NoScanout' (sandra-desktop:0.0): 0. 'NoScanout' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'NoScanout' is a read-only attribute. 'NoScanout' can use the following target types: X Screen, GPU. Attribute 'XServerUniqueId' (sandra-desktop:0.0): 1978901962. 'XServerUniqueId' is an integer attribute. 'XServerUniqueId' is a read-only attribute. 'XServerUniqueId' can use the following target types: X Screen. Attribute 'PixmapCache' (sandra-desktop:0.0): 1. 'PixmapCache' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'PixmapCache' can use the following target types: X Screen. Attribute 'PixmapCacheRoundSizeKB' (sandra-desktop:0.0): 1024. The valid values for 'PixmapCacheRoundSizeKB' are in the range 4 - 1048576 (inclusive). 'PixmapCacheRoundSizeKB' can use the following target types: X Screen. Attribute 'AccelerateTrapezoids' (sandra-desktop:0.0): 0. 'AccelerateTrapezoids' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'AccelerateTrapezoids' can use the following target types: X Screen. Attribute 'SyncToVBlank' (sandra-desktop:0.0): 1. 'SyncToVBlank' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'SyncToVBlank' can use the following target types: X Screen. Attribute 'LogAniso' (sandra-desktop:0.0): 0. The valid values for 'LogAniso' are in the range 0 - 4 (inclusive). 'LogAniso' can use the following target types: X Screen. Attribute 'FSAA' (sandra-desktop:0.0): 0. Valid values for 'FSAA' are: 0, 1, 5 and 8. 'FSAA' can use the following target types: X Screen. Attribute 'TextureSharpen' (sandra-desktop:0.0): 0. 'TextureSharpen' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'TextureSharpen' can use the following target types: X Screen. Attribute 'TextureClamping' (sandra-desktop:0.0): 1. 'TextureClamping' is an integer attribute. 'TextureClamping' can use the following target types: X Screen. Attribute 'FXAA' (sandra-desktop:0.0): 0. 'FXAA' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'FXAA' can use the following target types: X Screen. Attribute 'AllowFlipping' (sandra-desktop:0.0): 1. 'AllowFlipping' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'AllowFlipping' can use the following target types: X Screen. Attribute 'FSAAAppControlled' (sandra-desktop:0.0): 1. 'FSAAAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'FSAAAppControlled' can use the following target types: X Screen. Attribute 'LogAnisoAppControlled' (sandra-desktop:0.0): 1. 'LogAnisoAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'LogAnisoAppControlled' can use the following target types: X Screen. Attribute 'OpenGLImageSettings' (sandra-desktop:0.0): 1. The valid values for 'OpenGLImageSettings' are in the range 0 - 3 (inclusive). 'OpenGLImageSettings' can use the following target types: X Screen. Attribute 'SliMosaicModeAvailable' (sandra-desktop:0.0): 0. 'SliMosaicModeAvailable' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'SliMosaicModeAvailable' is a read-only attribute. 'SliMosaicModeAvailable' can use the following target types: X Screen, GPU, VCS. Attribute 'BusType' (sandra-desktop:0.0): 3. The valid values for 'BusType' are in the range 0 - 3 (inclusive). 'BusType' is a read-only attribute. 'BusType' can use the following target types: X Screen, GPU, SDI Input Device. Attribute 'VideoRam' (sandra-desktop:0.0): 524288. 'VideoRam' is an integer attribute. 'VideoRam' is a read-only attribute. 'VideoRam' can use the following target types: X Screen, GPU. Attribute 'Irq' (sandra-desktop:0.0): 21. 'Irq' is an integer attribute. 'Irq' is a read-only attribute. 'Irq' can use the following target types: X Screen, GPU, SDI Input Device. Attribute 'GPUMemoryInterface' (sandra-desktop:0.0): 32. 'GPUMemoryInterface' is an integer attribute. 'GPUMemoryInterface' is a read-only attribute. 'GPUMemoryInterface' can use the following target types: X Screen, GPU. Attribute 'GPU2DClockFreqs' (sandra-desktop:0.0): 425,666. The valid values for 'GPU2DClockFreqs' are in the ranges 106 - 850, 166 - 1200 (inclusive). 'GPU2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPU3DClockFreqs' (sandra-desktop:0.0): 425,666. The valid values for 'GPU3DClockFreqs' are in the ranges 106 - 850, 166 - 1200 (inclusive). 'GPU3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUDefault2DClockFreqs' (sandra-desktop:0.0): 425,666. 'GPUDefault2DClockFreqs' is a packed integer attribute. 'GPUDefault2DClockFreqs' is a read-only attribute. 'GPUDefault2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUDefault3DClockFreqs' (sandra-desktop:0.0): 425,666. 'GPUDefault3DClockFreqs' is a packed integer attribute. 'GPUDefault3DClockFreqs' is a read-only attribute. 'GPUDefault3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentClockFreqs' (sandra-desktop:0.0): 425,666. 'GPUCurrentClockFreqs' is a packed integer attribute. 'GPUCurrentClockFreqs' is a read-only attribute. 'GPUCurrentClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentClockFreqsString' (sandra-desktop:0.0): nvclock=425, memclock=666 'GPUCurrentClockFreqsString' is a string attribute. 'GPUCurrentClockFreqsString' can use the following target types: X Screen, GPU. Attribute 'GPUErrors' (sandra-desktop:0.0): 0. 'GPUErrors' is an integer attribute. 'GPUErrors' is a read-only attribute. 'GPUErrors' can use the following target types: X Screen. Attribute 'GPUPowerSource' (sandra-desktop:0.0): 0. 'GPUPowerSource' is an integer attribute. 'GPUPowerSource' is a read-only attribute. 'GPUPowerSource' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentPerfLevel' (sandra-desktop:0.0): 0. 'GPUCurrentPerfLevel' is an integer attribute. 'GPUCurrentPerfLevel' is a read-only attribute. 'GPUCurrentPerfLevel' can use the following target types: X Screen, GPU. Attribute 'GPUAdaptiveClockState' (sandra-desktop:0.0): 1. 'GPUAdaptiveClockState' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'GPUAdaptiveClockState' is a read-only attribute. 'GPUAdaptiveClockState' can use the following target types: X Screen, GPU. Attribute 'GPUPerfModes' (sandra-desktop:0.0): perf=0, nvclock=425, memclock=666 'GPUPerfModes' is a string attribute. 'GPUPerfModes' is a read-only attribute. 'GPUPerfModes' can use the following target types: X Screen, GPU. Attribute 'ECCSupported' (sandra-desktop:0.0): 0. 'ECCSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'ECCSupported' is a read-only attribute. 'ECCSupported' can use the following target types: X Screen, GPU. Attribute 'ECCConfigurationSupported' (sandra-desktop:0.0): 0. 'ECCConfigurationSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'ECCConfigurationSupported' is a read-only attribute. 'ECCConfigurationSupported' can use the following target types: X Screen, GPU. Attribute 'GvoSupported' (sandra-desktop:0.0): 0. 'GvoSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'GvoSupported' is a read-only attribute. 'GvoSupported' can use the following target types: X Screen. Attribute 'IsGvoDisplay' (sandra-desktop:0.0; display device: CRT-0): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0.0; display device: CRT-0): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0.0; display device: CRT-0): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0.0; display device: CRT-0): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0.0; display device: CRT-0): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0.0; display device: CRT-0): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'CurrentMetaModeID' (sandra-desktop:0.0): 50. 'CurrentMetaModeID' is an integer attribute. 'CurrentMetaModeID' can use the following target types: X Screen. Attribute 'CurrentMetaMode' (sandra-desktop:0.0): id=50, switchable=yes, source=xconfig :: DPY-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortOut=1280x800+0+112} 'CurrentMetaMode' is a string attribute. 'CurrentMetaMode' can use the following target types: X Screen. Attribute 'XineramaInfoOrder' (sandra-desktop:0.0): VGA-0 'XineramaInfoOrder' is a string attribute. 'XineramaInfoOrder' can use the following target types: X Screen. Attribute 'XVideoSyncToDisplay' (sandra-desktop:0.0): 0x00000001. 'XVideoSyncToDisplay' is a bitmask attribute. 'XVideoSyncToDisplay' can use the following target types: X Screen. Attributes queryable via sandra-desktop:0[gpu:0]: Attribute 'OperatingSystem' (sandra-desktop:0[gpu:0]): 0. The valid values for 'OperatingSystem' are in the range 0 - 2 (inclusive). 'OperatingSystem' is a read-only attribute. 'OperatingSystem' can use the following target types: X Screen, GPU. Attribute 'NvidiaDriverVersion' (sandra-desktop:0[gpu:0]): 304.117 'NvidiaDriverVersion' is a string attribute. 'NvidiaDriverVersion' is a read-only attribute. 'NvidiaDriverVersion' can use the following target types: X Screen, GPU. Attribute 'ConnectedDisplays' (sandra-desktop:0[gpu:0]): 0x00000001. 'ConnectedDisplays' is a bitmask attribute. 'ConnectedDisplays' is a read-only attribute. 'ConnectedDisplays' can use the following target types: X Screen, GPU. Attribute 'EnabledDisplays' (sandra-desktop:0[gpu:0]): 0x00000001. 'EnabledDisplays' is a bitmask attribute. 'EnabledDisplays' is a read-only attribute. 'EnabledDisplays' can use the following target types: X Screen, GPU. Attribute 'Depth30Allowed' (sandra-desktop:0[gpu:0]): 0. 'Depth30Allowed' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'Depth30Allowed' is a read-only attribute. 'Depth30Allowed' can use the following target types: X Screen, GPU. Attribute 'NoScanout' (sandra-desktop:0[gpu:0]): 0. 'NoScanout' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'NoScanout' is a read-only attribute. 'NoScanout' can use the following target types: X Screen, GPU. Attribute 'SliMosaicModeAvailable' (sandra-desktop:0[gpu:0]): 0. 'SliMosaicModeAvailable' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'SliMosaicModeAvailable' is a read-only attribute. 'SliMosaicModeAvailable' can use the following target types: X Screen, GPU, VCS. Attribute 'BusType' (sandra-desktop:0[gpu:0]): 3. The valid values for 'BusType' are in the range 0 - 3 (inclusive). 'BusType' is a read-only attribute. 'BusType' can use the following target types: X Screen, GPU, SDI Input Device. Attribute 'VideoRam' (sandra-desktop:0[gpu:0]): 524288. 'VideoRam' is an integer attribute. 'VideoRam' is a read-only attribute. 'VideoRam' can use the following target types: X Screen, GPU. Attribute 'TotalDedicatedGPUMemory' (sandra-desktop:0[gpu:0]): 128. 'TotalDedicatedGPUMemory' is an integer attribute. 'TotalDedicatedGPUMemory' is a read-only attribute. 'TotalDedicatedGPUMemory' can use the following target types: GPU. Attribute 'UsedDedicatedGPUMemory' (sandra-desktop:0[gpu:0]): 81. 'UsedDedicatedGPUMemory' is an integer attribute. 'UsedDedicatedGPUMemory' is a read-only attribute. 'UsedDedicatedGPUMemory' can use the following target types: GPU. Attribute 'Irq' (sandra-desktop:0[gpu:0]): 21. 'Irq' is an integer attribute. 'Irq' is a read-only attribute. 'Irq' can use the following target types: X Screen, GPU, SDI Input Device. Attribute 'GPUMemoryInterface' (sandra-desktop:0[gpu:0]): 32. 'GPUMemoryInterface' is an integer attribute. 'GPUMemoryInterface' is a read-only attribute. 'GPUMemoryInterface' can use the following target types: X Screen, GPU. Attribute 'GPU2DClockFreqs' (sandra-desktop:0[gpu:0]): 425,666. The valid values for 'GPU2DClockFreqs' are in the ranges 106 - 850, 166 - 1200 (inclusive). 'GPU2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPU3DClockFreqs' (sandra-desktop:0[gpu:0]): 425,666. The valid values for 'GPU3DClockFreqs' are in the ranges 106 - 850, 166 - 1200 (inclusive). 'GPU3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUDefault2DClockFreqs' (sandra-desktop:0[gpu:0]): 425,666. 'GPUDefault2DClockFreqs' is a packed integer attribute. 'GPUDefault2DClockFreqs' is a read-only attribute. 'GPUDefault2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUDefault3DClockFreqs' (sandra-desktop:0[gpu:0]): 425,666. 'GPUDefault3DClockFreqs' is a packed integer attribute. 'GPUDefault3DClockFreqs' is a read-only attribute. 'GPUDefault3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentClockFreqs' (sandra-desktop:0[gpu:0]): 425,666. 'GPUCurrentClockFreqs' is a packed integer attribute. 'GPUCurrentClockFreqs' is a read-only attribute. 'GPUCurrentClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentClockFreqsString' (sandra-desktop:0[gpu:0]): nvclock=425, memclock=666 'GPUCurrentClockFreqsString' is a string attribute. 'GPUCurrentClockFreqsString' can use the following target types: X Screen, GPU. Attribute 'PCIDomain' (sandra-desktop:0[gpu:0]): 0. 'PCIDomain' is an integer attribute. 'PCIDomain' is a read-only attribute. 'PCIDomain' can use the following target types: GPU, SDI Input Device. Attribute 'PCIBus' (sandra-desktop:0[gpu:0]): 0. 'PCIBus' is an integer attribute. 'PCIBus' is a read-only attribute. 'PCIBus' can use the following target types: GPU, SDI Input Device. Attribute 'PCIDevice' (sandra-desktop:0[gpu:0]): 13. 'PCIDevice' is an integer attribute. 'PCIDevice' is a read-only attribute. 'PCIDevice' can use the following target types: GPU, SDI Input Device. Attribute 'PCIFunc' (sandra-desktop:0[gpu:0]): 0. 'PCIFunc' is an integer attribute. 'PCIFunc' is a read-only attribute. 'PCIFunc' can use the following target types: GPU, SDI Input Device. Attribute 'PCIID' (sandra-desktop:0[gpu:0]): 4318,976. 'PCIID' is a packed integer attribute. 'PCIID' is a read-only attribute. 'PCIID' can use the following target types: GPU, SDI Input Device. Attribute 'GPUPowerSource' (sandra-desktop:0[gpu:0]): 0. 'GPUPowerSource' is an integer attribute. 'GPUPowerSource' is a read-only attribute. 'GPUPowerSource' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentPerfLevel' (sandra-desktop:0[gpu:0]): 0. 'GPUCurrentPerfLevel' is an integer attribute. 'GPUCurrentPerfLevel' is a read-only attribute. 'GPUCurrentPerfLevel' can use the following target types: X Screen, GPU. Attribute 'GPUAdaptiveClockState' (sandra-desktop:0[gpu:0]): 1. 'GPUAdaptiveClockState' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'GPUAdaptiveClockState' is a read-only attribute. 'GPUAdaptiveClockState' can use the following target types: X Screen, GPU. Attribute 'GPUPerfModes' (sandra-desktop:0[gpu:0]): perf=0, nvclock=425, memclock=666 'GPUPerfModes' is a string attribute. 'GPUPerfModes' is a read-only attribute. 'GPUPerfModes' can use the following target types: X Screen, GPU. Attribute 'ECCSupported' (sandra-desktop:0[gpu:0]): 0. 'ECCSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'ECCSupported' is a read-only attribute. 'ECCSupported' can use the following target types: X Screen, GPU. Attribute 'ECCConfigurationSupported' (sandra-desktop:0[gpu:0]): 0. 'ECCConfigurationSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'ECCConfigurationSupported' is a read-only attribute. 'ECCConfigurationSupported' can use the following target types: X Screen, GPU. Attribute 'IsGvoDisplay' (sandra-desktop:0[gpu:0]; display device: CRT-0): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[gpu:0]; display device: CRT-0): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[gpu:0]; display device: CRT-0): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[gpu:0]; display device: CRT-0): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[gpu:0]; display device: CRT-0): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[gpu:0]; display device: CRT-0): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attributes queryable via sandra-desktop:0[dpy:0]: Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'IsGvoDisplay' (sandra-desktop:0[dpy:0]): 0. 'IsGvoDisplay' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'IsGvoDisplay' is a read-only attribute. 'IsGvoDisplay' is display device specific. 'IsGvoDisplay' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'DigitalVibrance' (sandra-desktop:0[dpy:0]): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpening' (sandra-desktop:0[dpy:0]): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'ImageSharpeningDefault' (sandra-desktop:0[dpy:0]): 0. 'ImageSharpeningDefault' is an integer attribute. 'ImageSharpeningDefault' is a read-only attribute. 'ImageSharpeningDefault' is display device specific. 'ImageSharpeningDefault' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate' (sandra-desktop:0[dpy:0]): 60,02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RefreshRate3' (sandra-desktop:0[dpy:0]): 60,020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU, Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. Attribute 'RandROutputID' (sandra-desktop:0[dpy:0]): 571. 'RandROutputID' is an integer attribute. 'RandROutputID' is a read-only attribute. 'RandROutputID' is display device specific. 'RandROutputID' can use the following target types: Display Device. ____________________________________________ *** /proc/cmdline *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.451836664 +0200 /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-3.13.0-33-generic root=UUID=8276b7e1-9c42-47dc-bdf4-98ee6a40f127 ro recovery nomodeset ____________________________________________ *** /proc/cpuinfo *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.459836664 +0200 /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Athlon(tm) II X2 215 Processor stepping : 2 microcode : 0x1000098 cpu MHz : 2700.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save bogomips : 5425.34 clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 1 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Athlon(tm) II X2 215 Processor stepping : 2 microcode : 0x1000098 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save bogomips : 5425.34 clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate ____________________________________________ *** /proc/interrupts *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.467836664 +0200 /proc/interrupts CPU0 CPU1 0: 43 0 IO-APIC-edge timer 1: 10 3751 IO-APIC-edge i8042 6: 0 3 IO-APIC-edge floppy 7: 2 0 IO-APIC-edge parport0 8: 0 1 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 113 34324 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge pata_amd 15: 0 0 IO-APIC-edge pata_amd 21: 31249 42748 IO-APIC-fasteoi ehci_hcd:usb1, nvidia 22: 27 453 IO-APIC-fasteoi ohci_hcd:usb2, snd_hda_intel 23: 6867 6692 IO-APIC-fasteoi sata_nv 43: 4543 8511 PCI-MSI-edge eth0 NMI: 6 5 Non-maskable interrupts LOC: 41225 41537 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 6 5 Performance monitoring interrupts IWI: 1948 1654 IRQ work interrupts RTR: 0 0 APIC ICR read retries RES: 166656 149395 Rescheduling interrupts CAL: 596 669 Function call interrupts TLB: 1028 1205 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 3 3 Machine check polls ERR: 1 MIS: 0 ____________________________________________ *** /proc/meminfo *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.471836664 +0200 /proc/meminfo MemTotal: 2971568 kB MemFree: 1623884 kB Buffers: 78264 kB Cached: 481528 kB SwapCached: 0 kB Active: 750316 kB Inactive: 436692 kB Active(anon): 628196 kB Inactive(anon): 6436 kB Active(file): 122120 kB Inactive(file): 430256 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2100104 kB HighFree: 1219980 kB LowTotal: 871464 kB LowFree: 403904 kB SwapTotal: 1951860 kB SwapFree: 1951860 kB Dirty: 32 kB Writeback: 0 kB AnonPages: 627244 kB Mapped: 155156 kB Shmem: 7424 kB Slab: 40456 kB SReclaimable: 23504 kB SUnreclaim: 16952 kB KernelStack: 3064 kB PageTables: 8364 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3437644 kB Committed_AS: 3277048 kB VmallocTotal: 122880 kB VmallocUsed: 54344 kB VmallocChunk: 64788 kB HardwareCorrupted: 0 kB AnonHugePages: 186368 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 137208 kB DirectMap2M: 776192 kB ____________________________________________ *** /proc/modules *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.475836664 +0200 /proc/modules nls_iso8859_1 12617 1 - Live 0xf86f8000 rfcomm 53664 8 - Live 0xf86e1000 bnep 18895 2 - Live 0xf8c46000 lp 13299 0 - Live 0xf8775000 usblp 18277 0 - Live 0xf8699000 nvidia 10304642 40 - Live 0xf9221000 (POF) uvcvideo 71309 0 - Live 0xf920e000 snd_hda_codec_via 23156 1 - Live 0xf9188000 videobuf2_vmalloc 13048 1 uvcvideo, Live 0xf842a000 videobuf2_memops 13170 1 videobuf2_vmalloc, Live 0xf844a000 videobuf2_core 39258 1 uvcvideo, Live 0xf9165000 snd_usb_audio 127638 1 - Live 0xf91d3000 videodev 108503 2 uvcvideo,videobuf2_core, Live 0xf91ab000 snd_usbmidi_lib 24367 1 snd_usb_audio, Live 0xf91fb000 snd_hda_intel 42730 3 - Live 0xf9173000 snd_hda_codec 164067 2 snd_hda_codec_via,snd_hda_intel, Live 0xf8516000 ppdev 17391 0 - Live 0xf84d5000 snd_hwdep 13272 2 snd_usb_audio,snd_hda_codec, Live 0xf84ec000 snd_pcm 85501 3 snd_usb_audio,snd_hda_intel,snd_hda_codec, Live 0xf8540000 snd_page_alloc 14230 2 snd_hda_intel,snd_pcm, Live 0xf84f3000 kvm_amd 50537 0 - Live 0xf90f8000 kvm 388083 1 kvm_amd, Live 0xf9098000 snd_seq_midi 13132 0 - Live 0xf8511000 btusb 27580 0 - Live 0xf84fd000 snd_seq_midi_event 14475 1 snd_seq_midi, Live 0xf84be000 snd_rawmidi 25135 2 snd_usbmidi_lib,snd_seq_midi, Live 0xf84df000 snd_seq 55383 2 snd_seq_midi,snd_seq_midi_event, Live 0xf9089000 bluetooth 342206 22 rfcomm,bnep,btusb, Live 0xf910a000 snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0xf84b9000 serio_raw 13230 0 - Live 0xf84b4000 snd_timer 28584 2 snd_pcm,snd_seq, Live 0xf8557000 snd 60871 20 snd_hda_codec_via,snd_usb_audio,snd_usbmidi_lib,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer, Live 0xf84c5000 k10temp 12958 0 - Live 0xf847a000 soundcore 12600 1 snd, Live 0xf8480000 parport_pc 31981 1 - Live 0xf8457000 parport 40836 3 lp,ppdev,parport_pc, Live 0xf846f000 i2c_nforce2 13037 0 - Live 0xf842f000 mac_hid 13037 0 - Live 0xf8564000 pata_acpi 12886 0 - Live 0xf8445000 usb_storage 48417 1 - Live 0xf8489000 psmouse 91329 0 - Live 0xf8497000 floppy 55416 0 - Live 0xf8460000 sata_nv 23004 3 - Live 0xf8423000 pata_amd 13761 0 - Live 0xf841a000 forcedeth 62140 0 - Live 0xf8434000 ____________________________________________ *** /proc/version *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.479836664 +0200 /proc/version Linux version 3.13.0-33-generic (buildd@klock) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #58-Ubuntu SMP Tue Jul 29 16:47:17 UTC 2014 ____________________________________________ *** /proc/pci does not exist ____________________________________________ *** /proc/iomem *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.483836664 +0200 /proc/iomem 00000000-00000fff : reserved 00001000-0009f3ff : System RAM 0009f400-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000a0000-000bffff : Video RAM area 000c0000-000cebff : Video ROM 000f0000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-b7edffff : System RAM 01000000-01660571 : Kernel code 01660572-019b3e7f : Kernel data 01a96000-01b7cfff : Kernel bss b7ee0000-b7ee2fff : ACPI Non-volatile Storage b7ee3000-b7eeffff : ACPI Tables b7ef0000-b7efffff : reserved b7f00000-b7ffffff : RAM buffer b8000000-bfffffff : reserved b8000000-bfffffff : pnp 00:0c c0000000-efffffff : PCI Bus 0000:00 c0000000-c001ffff : 0000:00:0d.0 e0000000-efffffff : 0000:00:0d.0 f0000000-f3ffffff : PCI MMCONFIG 0000 [bus 00-3f] f0000000-f3ffffff : reserved f0000000-f3ffffff : pnp 00:0b f4000000-fe02ffff : PCI Bus 0000:00 fb000000-fbffffff : 0000:00:0d.0 fb000000-fbffffff : nvidia fc000000-fcffffff : 0000:00:0d.0 fd800000-fd8fffff : PCI Bus 0000:01 fd900000-fd9fffff : PCI Bus 0000:04 fda00000-fdafffff : PCI Bus 0000:04 fdb00000-fdbfffff : PCI Bus 0000:03 fdc00000-fdcfffff : PCI Bus 0000:03 fdd00000-fddfffff : PCI Bus 0000:02 fde00000-fdefffff : PCI Bus 0000:02 fdf00000-fdffffff : PCI Bus 0000:01 fe028000-fe02bfff : 0000:00:05.0 fe028000-fe02bfff : ICH HD audio fe02c000-fe02cfff : 0000:00:08.0 fe02c000-fe02cfff : sata_nv fe02d000-fe02dfff : 0000:00:07.0 fe02d000-fe02dfff : forcedeth fe02e000-fe02e0ff : 0000:00:02.1 fe02e000-fe02e0ff : ehci_hcd fe02f000-fe02ffff : 0000:00:02.0 fe02f000-fe02ffff : ohci_hcd fec00000-ffffffff : reserved fec00000-fec003ff : IOAPIC 0 fec80000-fecbffff : PCI Bus 0000:00 fee00000-feefffff : pnp 00:0c fee00000-fee00fff : Local APIC feff0000-feff03ff : HPET 0 feff0000-feff00ff : pnp 00:0c fefff000-feffffff : pnp 00:0c fff80000-fff80fff : pnp 00:0c fff90000-fffbffff : pnp 00:0c fffed000-fffeffff : pnp 00:0c ffff0000-ffffffff : pnp 00:0c ____________________________________________ *** /proc/mtrr *** ls: -rw-r--r-- 1 root root 0 2014-08-14 15:08:52.048242938 +0200 /proc/mtrr reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back ____________________________________________ *** /proc/driver/nvidia/version *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.495836664 +0200 /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86 Kernel Module 304.117 Tue Nov 26 21:36:39 PST 2013 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ____________________________________________ *** /proc/driver/nvidia/gpus/0/information *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.499836664 +0200 /proc/driver/nvidia/gpus/0/information Model: GeForce 6150SE nForce 430 IRQ: 21 GPU UUID: N/A Video BIOS: 05.61.32.22.01 Bus Type: PCI DMA Size: 39 bits DMA Mask: 0x7fffffffff Bus Location: 0000:00.0d.0 ____________________________________________ *** /proc/driver/nvidia/gpus/0/registry *** ls: -rw-r--r-- 1 root root 0 2014-08-14 15:21:23.503836664 +0200 /proc/driver/nvidia/gpus/0/registry Binary: "" ____________________________________________ *** /proc/driver/nvidia/warnings/README *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.511836664 +0200 /proc/driver/nvidia/warnings/README The NVIDIA graphics driver tries to detect potential problems with the host system and warns about them using the system's logging mechanisms. Important warning message are also logged to dedicated text files in this directory. ____________________________________________ *** /proc/driver/nvidia/params *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.515836664 +0200 /proc/driver/nvidia/params EnableVia4x: 0 EnableALiAGP: 0 NvAGP: 3 ReqAGPRate: 15 EnableAGPSBA: 0 EnableAGPFW: 0 Mobile: 4294967295 ResmanDebugLevel: 4294967295 RmLogonRC: 1 ModifyDeviceFiles: 1 DeviceFileUID: 0 DeviceFileGID: 0 DeviceFileMode: 438 RemapLimit: 0 UpdateMemoryTypes: 4294967295 InitializeSystemMemoryAllocations: 1 UseVBios: 1 RMEdgeIntrCheck: 1 UsePageAttributeTable: 4294967295 EnableMSI: 0 MapRegistersEarly: 0 RegisterForACPIEvents: 1 RegistryDwords: "" RmMsg: "" ____________________________________________ *** /proc/driver/nvidia/registry *** ls: -rw-r--r-- 1 root root 0 2014-08-14 15:21:23.519836664 +0200 /proc/driver/nvidia/registry Binary: "" ____________________________________________ *** /proc/asound/cards *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.527836664 +0200 /proc/asound/cards 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfe028000 irq 22 1 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825 USB Device 0x46d:0x825 at usb-0000:00:02.1-2, high speed ____________________________________________ *** /proc/asound/pcm *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.531836664 +0200 /proc/asound/pcm 00-00: VT1708BCE Analog : VT1708BCE Analog : playback 1 : capture 1 00-02: VT1708BCE Alt Analog : VT1708BCE Alt Analog : playback 1 00-03: VT1708BCE Digital : VT1708BCE Digital : playback 1 01-00: USB Audio : USB Audio : capture 1 ____________________________________________ *** /proc/asound/modules *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.535836664 +0200 /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio ____________________________________________ *** /proc/asound/devices *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.539836664 +0200 /proc/asound/devices 1: : sequencer 2: [ 0- 2]: digital audio playback 3: [ 0- 3]: digital audio playback 4: [ 0- 0]: digital audio playback 5: [ 0- 0]: digital audio capture 6: [ 0- 0]: hardware dependent 7: [ 0] : control 8: [ 1- 0]: digital audio capture 9: [ 1] : control 33: : timer ____________________________________________ *** /proc/asound/version *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.543836664 +0200 /proc/asound/version Advanced Linux Sound Architecture Driver Version k3.13.0-33-generic. ____________________________________________ *** /proc/asound/timers *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.547836664 +0200 /proc/asound/timers G0: system timer : 4000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE P0-2-0: PCM playback 0-2-0 : SLAVE P0-3-0: PCM playback 0-3-0 : SLAVE P1-0-1: PCM capture 1-0-1 : SLAVE ____________________________________________ *** /proc/asound/hwdep *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.551836664 +0200 /proc/asound/hwdep 00-00: HDA Codec 0 ____________________________________________ *** /proc/asound/card0/codec#0 *** ls: -r--r--r-- 1 root root 0 2014-08-14 15:21:23.555836664 +0200 /proc/asound/card0/codec#0 Codec: VIA VT1708BCE Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1106e721 Subsystem Id: 0x15658108 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 GPIO: io=1, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT1708BCE Analog", type="Audio", device=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Converter: stream=8, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Converter: stream=8, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="VT1708BCE Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x13 0x13] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x17 Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x8b 0x8b] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1e Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="VT1708BCE Digital", type="HDMI", device=3 Converter: stream=8, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 7 0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25 Node 0x17 [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 6 0x1f 0x1a* 0x1b 0x1e 0x1d 0x16 Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x11 Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x41011012: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x1a [Pin Complex] wcaps 0x400581: Stereo Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Jack", index=0, device=0 Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x01a19036: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x6 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x26 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Line Jack", index=0, device=0 Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x01813039: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0x9 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=05, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x16 Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x022140ff: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x16 0x25* Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x02a19038: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x8 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x16* 0x25 Node 0x1f [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x50370137: [N/A] CD at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x7 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel Conn = RCA, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital Control: name="HDMI Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x985601f0: [Fixed] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x15 Node 0x22 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x41016011: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x26 Node 0x23 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x41012014: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x27 Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Converter: stream=8, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT1708BCE Alt Analog", type="Audio", device=2 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Converter: stream=8, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x24 Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x25 ____________________________________________ /usr/bin/nvidia-smi -q ==============NVSMI LOG============== Timestamp : Thu Aug 14 15:21:25 2014 Driver Version : 304.117 Attached GPUs : 1 GPU 0000:00:0D.0 Product Name : GeForce 6150SE nForce 430 Display Mode : N/A Persistence Mode : N/A Driver Model Current : N/A Pending : N/A Serial Number : N/A GPU UUID : N/A VBIOS Version : 05.61.32.22.01 Inforom Version Image Version : N/A OEM Object : N/A ECC Object : N/A Power Management Object : N/A GPU Operation Mode Current : N/A Pending : N/A PCI Bus : 0x00 Device : 0x0D Domain : 0x0000 Device Id : 0x03D010DE Bus Id : 0000:00:0D.0 Sub System Id : 0x14051565 GPU Link Info PCIe Generation Max : N/A Current : N/A Link Width Max : N/A Current : N/A Fan Speed : N/A Performance State : N/A Clocks Throttle Reasons : N/A Memory Usage Total : 126 MB Used : 80 MB Free : 46 MB Compute Mode : N/A Utilization Gpu : N/A Memory : N/A Ecc Mode Current : N/A Pending : N/A ECC Errors Volatile Single Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Total : N/A Double Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Total : N/A Aggregate Single Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Total : N/A Double Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Total : N/A Temperature Gpu : N/A Power Readings Power Management : N/A Power Draw : N/A Power Limit : N/A Default Power Limit : N/A Min Power Limit : N/A Max Power Limit : N/A Clocks Graphics : N/A SM : N/A Memory : N/A Applications Clocks Graphics : N/A Memory : N/A Max Clocks Graphics : N/A SM : N/A Memory : N/A Compute Processes : N/A /usr/bin/nvidia-smi -q -u ==============NVSMI LOG============== Timestamp : Thu Aug 14 15:21:25 2014 Driver Version : 304.117 HIC Info : N/A Attached Units : 0 ____________________________________________ Skipping nvidia-debugdump output (nvidia-debugdump not found) ____________________________________________ End of NVIDIA bug report log file.
Danke!