pepre schrieb:
Ich ziehe das immer per Hand hoch, mit eingebauter Karte natürlich (idR RME Multiface). Server-Installation, LXDE, ALSA, jack, und dann Ardour und Konsorten.
Genau, so mach ich das normalerweise auch.
pepre schrieb:
Und die ALSA-relevanten Teile aus dmesg, RT-Einstellungen und allsowas 😉
Erwischt 😳 jetzt frag ich mich nämlich gerade, welche Filteroption ich bei dmesg jetzt am besten einstelle... Egal, hier kommt erst mal der Inhalt des JACK-Meldungsfensters. Es gibt zwei Varianten.
Hier stand die RME-Karte in ihrem Justagefenster auf 48 kHz, JACK aber noch versehentlich auf 44,1 kHz:
10:52:26.510 Steckfeld deaktiviert.
10:52:26.515 Statistik zurückgesetzt.
10:52:27.093 D-BUS: Dienst ist verfügbar (org.jackaudio.service aka jackdbus).
10:52:27.478 D-BUS: JACK-Server konnte nicht gestartet werden. Tut mir leid
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
(qjackctl:3101): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion 'GTK_IS_WIDGET (widget)' failed
(qjackctl:3101): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion 'GTK_IS_WIDGET (widget)' failed
Sat Aug 30 10:52:27 2014: Starting jack server...
Sat Aug 30 10:52:27 2014: JACK server starting in realtime mode with priority 10
Sat Aug 30 10:52:27 2014: Acquired audio card Audio0
Sat Aug 30 10:52:27 2014: creating alsa driver ... hw:DSP|hw:DSP|512|3|44100|0|0|nomon|swmeter|soft-mode|32bit
Sat Aug 30 10:52:27 2014: configuring for 44100Hz, period = 512 frames (11.6 ms), buffer = 3 periods
Sat Aug 30 10:52:27 2014: ALSA: final selected sample format for capture: 32bit integer little-endian
Sat Aug 30 10:52:27 2014: ERROR: ALSA: got smaller periods 2 than 3 for capture
Sat Aug 30 10:52:27 2014: ERROR: ALSA: cannot configure capture channel
Sat Aug 30 10:52:27 2014: ERROR: Cannot initialize driver
Sat Aug 30 10:52:27 2014: ERROR: JackServer::Open failed with -1
Sat Aug 30 10:52:27 2014: ERROR: Failed to open server
Sat Aug 30 10:52:28 2014: Saving settings to "/home/michael/.config/jack/conf.xml" ...
10:52:34.476 Keine Verbindungsaufnahme als Client zum JACK-Server möglich. - Gesamtbetrieb schlug fehl. - Verbindungsaufnahme zum Server gescheitert. Bitte sehen Sie im Meldungsfenster nach weiteren Informationen.
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
Hier stehen beim nächsten Versuch beide auf 48 kHz:
(qjackctl:3101): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion 'GTK_IS_WIDGET (widget)' failed
(qjackctl:3101): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion 'GTK_IS_WIDGET (widget)' failed
10:56:39.719 D-BUS: JACK-Server konnte nicht gestartet werden. Tut mir leid
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
Sat Aug 30 10:56:39 2014: Starting jack server...
Sat Aug 30 10:56:39 2014: JACK server starting in realtime mode with priority 10
Sat Aug 30 10:56:39 2014: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Aug 30 10:56:39 2014: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0
Sat Aug 30 10:56:39 2014: ERROR: Audio device hw:DSP cannot be acquired...
Sat Aug 30 10:56:39 2014: ERROR: Cannot initialize driver
Sat Aug 30 10:56:39 2014: ERROR: JackServer::Open failed with -1
Sat Aug 30 10:56:39 2014: ERROR: Failed to open server
Sat Aug 30 10:56:40 2014: Saving settings to "/home/michael/.config/jack/conf.xml" ...
10:56:44.249 Keine Verbindungsaufnahme als Client zum JACK-Server möglich. - Gesamtbetrieb schlug fehl. - Verbindungsaufnahme zum Server gescheitert. Bitte sehen Sie im Meldungsfenster nach weiteren Informationen.
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
Jetzt zu dmesg - ich habe einige grep's versucht, wußte aber keine, mit der ich eine einigermaßen sinnvolle Eingrenzung von Meldungen bekommen hätte. Vielleicht wißt Ihr ja eine?
:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-35-lowlatency (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP PREEMPT Fri Aug 15 02:28:37 UTC 2014 (Ubuntu 3.13.0-35.62-lowlatency 3.13.11.6)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fff0000-0x000000005fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005fff3000-0x000000005fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: MEDIONPC MS-7091/MS-7091, BIOS 6.00 PG 10/26/2004
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5680-0x000f568f] mapped at [c00f5680]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b90000, 0x01b90fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c54000-0x36e21fff]
[ 0.000000] ACPI: RSDP 000f7120 000014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 5fff3000 000030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 5fff3040 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 5fff30c0 0044AA (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5fff0000 000040
[ 0.000000] ACPI: MCFG 5fff7600 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 5fff7580 000068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 643MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b91000, 0x01b91fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x5ffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5ffeffff]
[ 0.000000] On node 0 totalpages: 393102
[ 0.000000] free_area_init_node: node 0, pgdat c199d640, node_mem_map f6ffe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1288 pages used for memmap
[ 0.000000] HighMem zone: 164850 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6fd9000 s36288 r0 d21056 u57344
[ 0.000000] pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 391318
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-lowlatency root=UUID=ea660a37-e260-4e0d-befd-65664deeffd9 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3145592 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0005fff0)
[ 0.000000] Memory: 1525948K/1572408K available (6548K kernel code, 633K rwdata, 2764K rodata, 868K init, 924K bss, 46460K reserved, 659400K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19b9000 - 0xc1a92000 ( 868 kB)
[ 0.000000] .data : 0xc16655f4 - 0xc19b8540 (3403 kB)
[ 0.000000] .text : 0xc1000000 - 0xc16655f4 (6549 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3391.408 MHz processor
[ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6782.81 BogoMIPS (lpj=3391408)
[ 0.002009] pid_max: default: 32768 minimum: 301
[ 0.002057] Security Framework initialized
[ 0.002090] AppArmor: AppArmor initialized
[ 0.002093] Yama: becoming mindful.
[ 0.002170] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002174] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003117] Initializing cgroup subsys memory
[ 0.003129] Initializing cgroup subsys devices
[ 0.003133] Initializing cgroup subsys freezer
[ 0.003136] Initializing cgroup subsys blkio
[ 0.003139] Initializing cgroup subsys perf_event
[ 0.003143] Initializing cgroup subsys hugetlb
[ 0.003182] Disabled fast string operations
[ 0.003191] CPU: Physical Processor ID: 0
[ 0.003194] CPU: Processor Core ID: 0
[ 0.003198] mce: CPU supports 4 MCE banks
[ 0.003211] CPU0: Thermal monitoring enabled (TM1)
[ 0.003231] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[ 0.003231] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.003231] tlb_flushall_shift: 6
[ 0.003666] Freeing SMP alternatives memory: 24K (c1a92000 - c1a98000)
[ 0.004825] ACPI: Core revision 20131115
[ 0.007536] ACPI: All ACPI Tables successfully acquired
[ 0.008017] ftrace: allocating 27824 entries in 55 pages
[ 0.019174] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.019562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030111] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz (fam: 0f, model: 03, stepping: 04)
[ 0.031000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.031000] ... version: 0
[ 0.031000] ... bit width: 40
[ 0.031000] ... generic registers: 18
[ 0.031000] ... value mask: 000000ffffffffff
[ 0.031000] ... max period: 0000007fffffffff
[ 0.031000] ... fixed-purpose events: 0
[ 0.031000] ... event mask: 000000000003ffff
[ 0.038063] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.040115] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
[ 0.040119] x86: Booting SMP configuration:
[ 0.003000] Initializing CPU#1
[ 0.003000] Disabled fast string operations
[ 0.040122] .... node #0, CPUs: #1
[ 0.052078] x86: Booted up 1 node, 2 CPUs
[ 0.052088] smpboot: Total of 2 processors activated (13565.63 BogoMIPS)
[ 0.053235] devtmpfs: initialized
[ 0.053364] EVM: security.selinux
[ 0.053368] EVM: security.SMACK64
[ 0.053370] EVM: security.ima
[ 0.053372] EVM: security.capability
[ 0.053490] PM: Registering ACPI NVS region [mem 0x5fff0000-0x5fff2fff] (12288 bytes)
[ 0.055135] pinctrl core: initialized pinctrl subsystem
[ 0.055268] regulator-dummy: no parameters
[ 0.055310] RTC time: 8:23:13, date: 08/30/14
[ 0.055376] NET: Registered protocol family 16
[ 0.055634] EISA bus registered
[ 0.055637] cpuidle: using governor ladder
[ 0.055640] cpuidle: using governor menu
[ 0.055725] ACPI: bus type PCI registered
[ 0.055730] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.055844] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000)
[ 0.055849] PCI: MMCONFIG at [mem 0xe0000000-0xe00fffff] reserved in E820
[ 0.055851] PCI: Using MMCONFIG for extended config space
[ 0.055853] PCI: Using configuration type 1 for base access
[ 0.058035] bio: create slab <bio-0> at 0
[ 0.058207] ACPI: Added _OSI(Module Device)
[ 0.058211] ACPI: Added _OSI(Processor Device)
[ 0.058214] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.058217] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064844] ACPI: Interpreter enabled
[ 0.064863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.064871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.064893] ACPI: (supports S0 S3 S4 S5)
[ 0.064897] ACPI: Using IOAPIC for interrupt routing
[ 0.064942] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.065113] ACPI: No dock devices found.
[ 0.073596] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.073607] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.073615] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.073730] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.073735] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.073738] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.073742] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.073745] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.073748] PCI: root bus 00: using default resources
[ 0.073754] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-00] only partially covers this bridge
[ 0.074047] PCI host bridge to bus 0000:00
[ 0.074054] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.074058] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.074062] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.074077] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
[ 0.074247] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
[ 0.074310] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.074464] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.074486] pci 0000:00:1b.0: reg 0x10: [mem 0xd8100000-0xd8103fff 64bit]
[ 0.074567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.074647] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.074702] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.074786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.074867] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.074928] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.074977] pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f]
[ 0.075081] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.075135] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.075183] pci 0000:00:1d.1: reg 0x20: [io 0xe000-0xe01f]
[ 0.075282] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.075334] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.075382] pci 0000:00:1d.2: reg 0x20: [io 0xe100-0xe11f]
[ 0.075476] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.075530] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.075578] pci 0000:00:1d.3: reg 0x20: [io 0xe200-0xe21f]
[ 0.075672] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.075734] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.075755] pci 0000:00:1d.7: reg 0x10: [mem 0xd8104000-0xd81043ff]
[ 0.075840] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.075914] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.075969] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.076106] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.076161] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
[ 0.076255] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.076267] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.076277] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.076284] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
[ 0.076398] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.076415] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.076427] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.076438] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.076449] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.076461] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.076599] pci 0000:00:1f.2: [8086:2652] type 00 class 0x01018f
[ 0.076617] pci 0000:00:1f.2: reg 0x10: [io 0xe400-0xe407]
[ 0.076628] pci 0000:00:1f.2: reg 0x14: [io 0xe500-0xe503]
[ 0.076638] pci 0000:00:1f.2: reg 0x18: [io 0xe600-0xe607]
[ 0.076649] pci 0000:00:1f.2: reg 0x1c: [io 0xe700-0xe703]
[ 0.076659] pci 0000:00:1f.2: reg 0x20: [io 0xe800-0xe80f]
[ 0.076670] pci 0000:00:1f.2: reg 0x24: [mem 0xd8105000-0xd81053ff]
[ 0.076706] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.076829] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.076888] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.077102] pci 0000:01:00.0: [10de:0145] type 00 class 0x030000
[ 0.077117] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd3ffffff]
[ 0.077132] pci 0000:01:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.077145] pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd4ffffff 64bit]
[ 0.077162] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.077245] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.077256] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.077264] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd7ffffff]
[ 0.077341] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.077417] pci 0000:03:01.0: [1131:7134] type 00 class 0x048000
[ 0.077440] pci 0000:03:01.0: reg 0x10: [mem 0xd8010000-0xd80103ff]
[ 0.077528] pci 0000:03:01.0: supports D1 D2
[ 0.077583] pci 0000:03:02.0: [10ee:3fc5] type 00 class 0x040100
[ 0.077602] pci 0000:03:02.0: reg 0x10: [mem 0xd8000000-0xd800ffff]
[ 0.077724] pci 0000:03:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.077747] pci 0000:03:03.0: reg 0x10: [mem 0xd8011000-0xd80117ff]
[ 0.077761] pci 0000:03:03.0: reg 0x14: [io 0xd000-0xd07f]
[ 0.077843] pci 0000:03:03.0: supports D2
[ 0.077847] pci 0000:03:03.0: PME# supported from D2 D3hot D3cold
[ 0.077914] pci 0000:03:04.0: [11c1:048c] type 00 class 0x078000
[ 0.077936] pci 0000:03:04.0: reg 0x10: [mem 0xd8012000-0xd80120ff]
[ 0.077949] pci 0000:03:04.0: reg 0x14: [io 0xd100-0xd107]
[ 0.077962] pci 0000:03:04.0: reg 0x18: [io 0xd200-0xd2ff]
[ 0.078042] pci 0000:03:04.0: supports D2
[ 0.078046] pci 0000:03:04.0: PME# supported from D2 D3hot D3cold
[ 0.078118] pci 0000:03:06.0: [1106:3106] type 00 class 0x020000
[ 0.078141] pci 0000:03:06.0: reg 0x10: [io 0xd300-0xd3ff]
[ 0.078154] pci 0000:03:06.0: reg 0x14: [mem 0xd8013000-0xd80130ff]
[ 0.078236] pci 0000:03:06.0: supports D1 D2
[ 0.078240] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.078338] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.078344] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.078350] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.078358] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.078362] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.078382] pci_bus 0000:00: on NUMA node 0
[ 0.079362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.079472] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.079580] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.079687] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.079794] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.079901] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.080023] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.080132] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.080363] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.080415] Found 1 acpi root devices
[ 0.080577] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.080577] vgaarb: loaded
[ 0.080577] vgaarb: bridge control possible 0000:01:00.0
[ 0.081083] SCSI subsystem initialized
[ 0.081148] libata version 3.00 loaded.
[ 0.081148] ACPI: bus type USB registered
[ 0.081148] usbcore: registered new interface driver usbfs
[ 0.081148] usbcore: registered new interface driver hub
[ 0.081154] usbcore: registered new device driver usb
[ 0.081154] PCI: Using ACPI for IRQ routing
[ 0.081154] PCI: pci_cache_line_size set to 64 bytes
[ 0.081154] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.081154] e820: reserve RAM buffer [mem 0x5fff0000-0x5fffffff]
[ 0.081254] NetLabel: Initializing
[ 0.081258] NetLabel: domain hash size = 128
[ 0.081260] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.081278] NetLabel: unlabeled traffic allowed by default
[ 0.081302] hpet clockevent registered
[ 0.081302] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.081302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.081302] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.084050] Switched to clocksource hpet
[ 0.096258] AppArmor: AppArmor Filesystem Enabled
[ 0.096320] pnp: PnP ACPI init
[ 0.096351] ACPI: bus type PNP registered
[ 0.096606] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.096612] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.096618] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096639] pnp 00:01: [dma 4]
[ 0.096680] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.096746] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.096794] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.096847] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.097038] pnp 00:05: [dma 2]
[ 0.097094] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.097383] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.097859] pnp 00:07: can't evaluate _PRS: 12311
[ 0.097894] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.098091] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.098461] pnp 00:09: Plug and Play ACPI device, IDs WEC0513 (active)
[ 0.098549] system 00:0a: [io 0x0400-0x04bf] could not be reserved
[ 0.098555] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.098617] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.098986] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.098991] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099244] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.099250] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.099254] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.099258] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.099261] system 00:0d: [mem 0x5fff0000-0x5fffffff] could not be reserved
[ 0.099265] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.099269] system 00:0d: [mem 0x00100000-0x5ffeffff] could not be reserved
[ 0.099273] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.099277] system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.099281] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.099285] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.099289] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.099293] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.099296] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.099301] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.099313] pnp: PnP ACPI: found 14 devices
[ 0.099315] ACPI: bus type PNP unregistered
[ 0.099320] PnPBIOS: Disabled by ACPI PNP
[ 0.137681] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.137688] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.137692] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.137711] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.137715] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.137719] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.137727] pci 0000:00:01.0: BAR 15: assigned [mem 0x60000000-0x600fffff pref]
[ 0.137732] pci 0000:00:1c.0: BAR 14: assigned [mem 0x60100000-0x602fffff]
[ 0.137737] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60300000-0x604fffff 64bit pref]
[ 0.137742] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.137748] pci 0000:01:00.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.137753] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.137759] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd7ffffff]
[ 0.137763] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff pref]
[ 0.137770] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.137774] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.137780] pci 0000:00:1c.0: bridge window [mem 0x60100000-0x602fffff]
[ 0.137786] pci 0000:00:1c.0: bridge window [mem 0x60300000-0x604fffff 64bit pref]
[ 0.137794] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.137798] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.137804] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.137815] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.137818] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.137822] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xd7ffffff]
[ 0.137825] pci_bus 0000:01: resource 2 [mem 0x60000000-0x600fffff pref]
[ 0.137829] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.137832] pci_bus 0000:02: resource 1 [mem 0x60100000-0x602fffff]
[ 0.137835] pci_bus 0000:02: resource 2 [mem 0x60300000-0x604fffff 64bit pref]
[ 0.137838] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.137841] pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd80fffff]
[ 0.137844] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.137847] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.137903] NET: Registered protocol family 2
[ 0.138136] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.138163] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.138215] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.138271] TCP: reno registered
[ 0.138276] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138290] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138373] NET: Registered protocol family 1
[ 0.139484] pci 0000:01:00.0: Boot video device
[ 0.139503] PCI: CLS 32 bytes, default 64
[ 0.139590] Trying to unpack rootfs image as initramfs...
[ 0.613480] Freeing initrd memory: 18232K (f5c54000 - f6e22000)
[ 0.613781] microcode: CPU0 sig=0xf34, pf=0x10, revision=0xe
[ 0.613792] microcode: CPU1 sig=0xf34, pf=0x10, revision=0xe
[ 0.613924] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.613928] Scanning for low memory corruption every 60 seconds
[ 0.614415] Initialise system trusted keyring
[ 0.614482] audit: initializing netlink socket (disabled)
[ 0.614506] type=2000 audit(1409386992.613:1): initialized
[ 0.634197] bounce pool size: 64 pages
[ 0.634222] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.636422] zbud: loaded
[ 0.636534] VFS: Disk quotas dquot_6.5.2
[ 0.636609] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.637391] fuse init (API version 7.22)
[ 0.637533] msgmni has been set to 1728
[ 0.637630] Key type big_key registered
[ 0.638301] Key type asymmetric registered
[ 0.638307] Asymmetric key parser 'x509' registered
[ 0.638371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.638425] io scheduler noop registered
[ 0.638431] io scheduler deadline registered (default)
[ 0.638480] io scheduler cfq registered
[ 0.638823] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.639023] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.639143] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.639176] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.639290] ipmi message handler version 39.2
[ 0.639407] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.639415] ACPI: Power Button [PWRB]
[ 0.639473] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.639479] ACPI: Sleep Button [SLPB]
[ 0.639549] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.639554] ACPI: Power Button [PWRF]
[ 0.639619] ACPI: Fan [FAN] (on)
[ 0.640618] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.640622] ACPI: Thermal Zone [THRM] (56 C)
[ 0.640679] GHES: HEST is not enabled!
[ 0.640772] isapnp: Scanning for PnP cards...
[ 0.641097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.661744] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.664484] Linux agpgart interface v0.103
[ 0.667750] brd: module loaded
[ 0.669297] loop: module loaded
[ 0.669612] ata_piix 0000:00:1f.1: version 2.13
[ 0.671321] scsi0 : ata_piix
[ 0.671468] scsi1 : ata_piix
[ 0.671548] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.671552] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.671732] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.673152] scsi2 : ata_piix
[ 0.673267] scsi3 : ata_piix
[ 0.673347] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe800 irq 19
[ 0.673351] ata4: SATA max UDMA/133 cmd 0xe600 ctl 0xe700 bmdma 0xe808 irq 19
[ 0.674272] libphy: Fixed MDIO Bus: probed
[ 0.674585] tun: Universal TUN/TAP device driver, 1.6
[ 0.674589] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.674691] PPP generic driver version 2.4.2
[ 0.674786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.674795] ehci-pci: EHCI PCI platform driver
[ 0.674984] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.674996] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.678958] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.679040] ata2: port disabled--ignoring
[ 0.679098] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd8104000
[ 0.685031] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.685163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.685169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.685173] usb usb1: Product: EHCI Host Controller
[ 0.685177] usb usb1: Manufacturer: Linux 3.13.0-35-lowlatency ehci_hcd
[ 0.685181] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.685406] hub 1-0:1.0: USB hub found
[ 0.685424] hub 1-0:1.0: 8 ports detected
[ 0.685823] ehci-platform: EHCI generic platform driver
[ 0.685851] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.685855] ohci-pci: OHCI PCI platform driver
[ 0.685885] ohci-platform: OHCI generic platform driver
[ 0.685904] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.686095] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.686106] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.686191] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.686301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.686306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686311] usb usb2: Product: UHCI Host Controller
[ 0.686315] usb usb2: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[ 0.686319] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.686504] hub 2-0:1.0: USB hub found
[ 0.686521] hub 2-0:1.0: 2 ports detected
[ 0.686824] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.686833] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.686922] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 0.687050] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.687056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687060] usb usb3: Product: UHCI Host Controller
[ 0.687064] usb usb3: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[ 0.687068] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.687255] hub 3-0:1.0: USB hub found
[ 0.687271] hub 3-0:1.0: 2 ports detected
[ 0.687574] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.687584] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.687688] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[ 0.687797] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.687802] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687806] usb usb4: Product: UHCI Host Controller
[ 0.687810] usb usb4: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[ 0.687814] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.688020] hub 4-0:1.0: USB hub found
[ 0.688042] hub 4-0:1.0: 2 ports detected
[ 0.688346] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.688356] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.688452] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[ 0.688562] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.688567] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688571] usb usb5: Product: UHCI Host Controller
[ 0.688576] usb usb5: Manufacturer: Linux 3.13.0-35-lowlatency uhci_hcd
[ 0.688580] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.688771] hub 5-0:1.0: USB hub found
[ 0.688787] hub 5-0:1.0: 2 ports detected
[ 0.689140] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.689144] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.691792] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.691804] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.692068] mousedev: PS/2 mouse device common for all mice
[ 0.692361] rtc_cmos 00:02: RTC can wake from S4
[ 0.692528] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.692607] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.692792] device-mapper: uevent: version 1.0.3
[ 0.692928] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.692974] platform eisa.0: Probing EISA bus 0
[ 0.692987] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.693037] platform eisa.0: EISA: Detected 0 cards
[ 0.693051] cpufreq-nforce2: No nForce2 chipset.
[ 0.693057] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.693312] TCP: cubic registered
[ 0.693522] NET: Registered protocol family 10
[ 0.693893] NET: Registered protocol family 17
[ 0.693911] Key type dns_resolver registered
[ 0.694215] Using IPI No-Shortcut mode
[ 0.694388] Loading compiled-in X.509 certificates
[ 0.700151] Loaded X.509 cert 'Magrathea: Glacier signing key: 8b63d847310001a0d331c3751cd5299c254a5a57'
[ 0.700175] registered taskstats version 1
[ 0.710039] Key type trusted registered
[ 0.719066] Key type encrypted registered
[ 0.727069] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.727077] IMA: No TPM chip found, activating TPM-bypass!
[ 0.727379] regulator-dummy: disabling
[ 0.727443] Magic number: 10:935:372
[ 0.727568] rtc_cmos 00:02: setting system clock to 2014-08-30 08:23:13 UTC (1409386993)
[ 0.727672] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.727675] EDD information not available.
[ 0.727723] PM: Hibernation image not present or could not be loaded.
[ 0.830332] ata1.00: ATAPI: PIONEER DVD RW DVR-108, 1.18, max UDMA/66
[ 0.830342] ata1.01: ATAPI: IDE DVD-ROM 16X, VER 7.92, max UDMA/33
[ 0.830349] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.833203] ata1.00: configured for UDMA/33
[ 0.835143] ata3.00: LPM support broken, forcing max_power
[ 0.836334] ata1.01: configured for UDMA/33
[ 0.836531] ata3.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
[ 0.836536] ata3.00: 488397168 sectors, multi 16: LBA48
[ 0.842140] ata3.00: LPM support broken, forcing max_power
[ 0.843516] ata3.00: configured for UDMA/133
[ 0.878719] ata4.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
[ 0.878724] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.953686] ata4.00: configured for UDMA/133
[ 0.987041] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.000253] isapnp: No Plug & Play device found
[ 1.006441] scsi 0:0:0:0: CD-ROM PIONEER DVD RW DVR-108 1.18 PQ: 0 ANSI: 5
[ 1.012815] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.012820] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.013000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.013143] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.018445] scsi 0:0:1:0: CD-ROM IDE DVD-ROM 16X 7.92 PQ: 0 ANSI: 5
[ 1.019249] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 1.019402] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.019527] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.019770] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
[ 1.019963] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.020078] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.020126] sd 2:0:0:0: [sda] Write Protect is off
[ 1.020133] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.020194] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.020435] scsi 3:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5
[ 1.020726] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.020760] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.020897] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.020902] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.020957] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.081661] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 1.082356] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.101676] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
[ 1.101681] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.101686] usb 1-3: Product: USB 2.0 Hub
[ 1.101968] hub 1-3:1.0: USB hub found
[ 1.102050] hub 1-3:1.0: 4 ports detected
[ 1.124081] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 1.125039] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.125685] Freeing unused kernel memory: 868K (c19b9000 - c1a92000)
[ 1.125764] Write protecting the kernel text: 6552k
[ 1.125894] Write protecting the kernel read-only data: 2768k
[ 1.150360] systemd-udevd[120]: starting version 204
[ 1.235090] Floppy drive(s): fd0 is 1.44M
[ 1.251757] FDC 0 is a post-1991 82077
[ 1.255066] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 1.257403] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.257414] via_rhine: Broken BIOS detected, avoid_D3 enabled
[ 1.263625] via-rhine 0000:03:06.0 eth0: VIA Rhine III at 0xd8013000, 00:0c:76:71:02:09, IRQ 18
[ 1.264456] via-rhine 0000:03:06.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 1.352083] firewire_ohci 0000:03:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.371194] usb 1-8: New USB device found, idVendor=05e3, idProduct=0605
[ 1.371203] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.371208] usb 1-8: Product: USB2.0 Hub
[ 1.371789] hub 1-8:1.0: USB hub found
[ 1.372063] hub 1-8:1.0: 4 ports detected
[ 1.414905] random: nonblocking pool is initialized
[ 1.581060] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 1.615032] tsc: Refined TSC clocksource calibration: 3391.500 MHz
[ 1.705876] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.750035] usb 3-2: New USB device found, idVendor=049f, idProduct=000e
[ 1.750040] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.750044] usb 3-2: Product: Compaq Internet Keyboard
[ 1.750047] usb 3-2: Manufacturer: Compaq
[ 1.839057] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.853173] firewire_core 0000:03:03.0: created device fw0: GUID 0010dc0000831519, S400
[ 1.940644] usbcore: registered new interface driver usbhid
[ 1.940651] usbhid: USB HID core driver
[ 1.949558] input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 1.949789] hid-generic 0003:049F:000E.0001: input,hidraw0: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb-0000:00:1d.1-2/input0
[ 1.963214] usb 1-3.1: new high-speed USB device number 5 using ehci-pci
[ 1.990159] input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input7
[ 1.990472] hid-generic 0003:049F:000E.0002: input,hiddev0,hidraw1: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb-0000:00:1d.1-2/input1
[ 2.048710] usb 1-3.1: New USB device found, idVendor=1a40, idProduct=0101
[ 2.048717] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.048721] usb 1-3.1: Product: USB 2.0 Hub
[ 2.049052] hub 1-3.1:1.0: USB hub found
[ 2.049209] hub 1-3.1:1.0: 4 ports detected
[ 2.113342] usb 1-8.1: new high-speed USB device number 6 using ehci-pci
[ 2.325354] usb 1-8.1: New USB device found, idVendor=148f, idProduct=2570
[ 2.325361] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.325367] usb 1-8.1: Product: 802.11g WLAN
[ 2.325374] usb 1-8.1: Manufacturer: Ralink
[ 2.389360] usb 1-8.2: new full-speed USB device number 7 using ehci-pci
[ 2.453904] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 2.476227] usb 1-8.2: New USB device found, idVendor=0db0, idProduct=6855
[ 2.476233] usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.476237] usb 1-8.2: Product: SiW
[ 2.476240] usb 1-8.2: Manufacturer: SiW
[ 2.476243] usb 1-8.2: SerialNumber: BA5455091100
[ 2.550364] usb 1-8.3: new low-speed USB device number 8 using ehci-pci
[ 2.615107] Switched to clocksource tsc
[ 2.630220] usb 1-8.3: New USB device found, idVendor=0bc7, idProduct=0006
[ 2.630225] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.630228] usb 1-8.3: Product: USB Receiver
[ 2.630231] usb 1-8.3: Manufacturer: X10 Wireless Technology Inc
[ 2.704355] usb 1-8.4: new high-speed USB device number 9 using ehci-pci
[ 2.781603] usb 1-8.4: New USB device found, idVendor=0db0, idProduct=4023
[ 2.781607] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.781611] usb 1-8.4: Product: Card Reader V0.1C
[ 2.781614] usb 1-8.4: Manufacturer: Generic
[ 2.781617] usb 1-8.4: SerialNumber: AAAA12345678
[ 2.793944] usb-storage 1-8.4:1.0: USB Mass Storage device detected
[ 2.794232] scsi4 : usb-storage 1-8.4:1.0
[ 2.794404] usbcore: registered new interface driver usb-storage
[ 2.856111] usb 1-3.1.4: new high-speed USB device number 10 using ehci-pci
[ 2.943483] usb 1-3.1.4: New USB device found, idVendor=0bda, idProduct=8172
[ 2.943487] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.943491] usb 1-3.1.4: Product: RTL8191S WLAN Adapter
[ 2.943494] usb 1-3.1.4: Manufacturer: Manufacturer Realtek
[ 2.943497] usb 1-3.1.4: SerialNumber: 00e04c000001
[ 3.797165] scsi 4:0:0:0: Direct-Access Generic CF Card CF 0.1C PQ: 0 ANSI: 0 CCS
[ 3.799043] scsi 4:0:0:1: Direct-Access Generic MS/SD Combo MS 0.1C PQ: 0 ANSI: 0 CCS
[ 3.800913] scsi 4:0:0:2: Direct-Access Generic SM/xD Combo SM 0.1C PQ: 0 ANSI: 0 CCS
[ 3.801410] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.801795] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 3.802341] sd 4:0:0:2: Attached scsi generic sg6 type 0
[ 3.821668] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 3.822672] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 3.823672] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 6.811643] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 22.427112] Adding 1489916k swap on /dev/sda6. Priority:-1 extents:1 across:1489916k FS
[ 22.497703] Adding 1951740k swap on /dev/sdb6. Priority:-2 extents:1 across:1951740k FS
[ 22.580983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.757027] systemd-udevd[294]: starting version 204
[ 22.998768] lp: driver loaded but no devices found
[ 23.064629] ppdev: user-space parallel port driver
[ 23.082466] parport_pc 00:07: reported by Plug and Play ACPI
[ 23.082535] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 23.166336] lp0: using parport0 (interrupt-driven).
[ 23.254711] [drm] Initialized drm 1.1.0 20060810
[ 23.377127] intel_rng: FWH not detected
[ 23.402168] Linux video capture interface: v2.00
[ 23.403406] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[ 23.403419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.403423] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
[ 23.403431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.403435] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.520741] type=1400 audit(1409387016.292:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=368 comm="apparmor_parser"
[ 23.520757] type=1400 audit(1409387016.292:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=368 comm="apparmor_parser"
[ 23.520770] type=1400 audit(1409387016.292:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=368 comm="apparmor_parser"
[ 23.522072] type=1400 audit(1409387016.293:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=368 comm="apparmor_parser"
[ 23.522095] type=1400 audit(1409387016.294:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=368 comm="apparmor_parser"
[ 23.522662] type=1400 audit(1409387016.294:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=368 comm="apparmor_parser"
[ 23.558152] wmi: Mapper loaded
[ 23.578162] Bluetooth: Core ver 2.17
[ 23.580077] NET: Registered protocol family 31
[ 23.580085] Bluetooth: HCI device and connection manager initialized
[ 23.580102] Bluetooth: HCI socket layer initialized
[ 23.580111] Bluetooth: L2CAP socket layer initialized
[ 23.580128] Bluetooth: SCO socket layer initialized
[ 23.703300] usbcore: registered new interface driver btusb
[ 23.791525] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 23.796275] r8712u: Staging version
[ 23.796310] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 23.796320] usb 1-3.1.4: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 23.797046] Registered IR keymap rc-medion-x10-digitainer
[ 23.797460] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/rc/rc0/input8
[ 23.797563] usb 1-3.1.4: r8712u: Boot from EFUSE: Autoload OK
[ 23.797731] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/rc/rc0
[ 23.798039] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input9
[ 23.798547] usbcore: registered new interface driver ati_remote
[ 24.007826] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 24.008191] saa7134[0]: found at 0000:03:01.0, rev: 1, irq: 17, latency: 32, mmio: 0xd8010000
[ 24.008203] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
[ 24.008236] saa7134[0]: board init: gpio is 0
[ 24.080098] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 24.121730] autoconfig: line_outs=4 (0xb/0xe/0x1f/0x20/0x0) type:line
[ 24.121739] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.121745] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.121748] mono: mono_out=0x0
[ 24.121752] dig-out=0x12/0x0
[ 24.121755] inputs:
[ 24.121760] Rear Mic=0xd
[ 24.121764] Front Mic=0x10
[ 24.121767] Line=0xc
[ 24.121770] CD=0x11
[ 24.121773] Aux=0xf
[ 24.121775] dig-in=0x13
[ 24.206051] saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 24.206077] saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[ 24.206098] saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
[ 24.206118] saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[ 24.206140] saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f
[ 24.206161] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00
[ 24.206183] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.206205] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.206227] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.206248] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208564] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208587] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208609] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208631] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208653] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.208675] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.225053] saa7134[0] Board has DVB-T
[ 24.225063] saa7134[0] Tuner type is 63
[ 24.246609] [drm] hdmi device not found 1 0 1
[ 24.246835] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x043500a2
[ 24.246841] nouveau [ DEVICE][0000:01:00.0] Chipset: NV43 (NV43)
[ 24.246846] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 24.257548] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 24.274270] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[ 24.372940] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 24.372950] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 24.373192] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 24.373200] nouveau [ VBIOS][0000:01:00.0] version 05.43.02.29.a3
[ 24.373677] nouveau 0000:01:00.0: irq 43 for MSI/MSI-X
[ 24.373696] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 24.373882] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
[ 24.373887] nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB
[ 24.373892] nouveau [ PFB][0000:01:00.0] ZCOMP: 378880 tags
[ 24.437474] 3-004c supply vcc not found, using dummy regulator
[ 24.448817] i2c i2c-3: Assuming LM99 chip at 0x4c
[ 24.448826] i2c i2c-3: If it is an LM89, instantiate it with the new_device sysfs interface
[ 24.448838] nouveau [ PTHERM][0000:01:00.0] Found an lm99 at address 0x4c (controlled by lm_sensors, temp offset +5 C)
[ 24.448844] nouveau [ I2C][0000:01:00.0] detected monitoring device: lm99
[ 24.448859] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 24.448881] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 24.448888] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 24.470083] nouveau [ CLK][0000:01:00.0] 20: core 400 MHz shader 400 MHz memory 800 MHz
[ 24.470102] nouveau [ CLK][0000:01:00.0] --: core 299 MHz shader 299 MHz memory 598 MHz
[ 24.470322] [TTM] Zone kernel: Available graphics memory: 442836 kiB
[ 24.470327] [TTM] Zone highmem: Available graphics memory: 772536 kiB
[ 24.470330] [TTM] Initializing pool allocator
[ 24.470340] [TTM] Initializing DMA pool allocator
[ 24.470367] nouveau [ DRM] VRAM: 124 MiB
[ 24.470372] nouveau [ DRM] GART: 512 MiB
[ 24.470380] nouveau [ DRM] TMDS table version 1.1
[ 24.470385] nouveau [ DRM] DCB version 3.0
[ 24.470391] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 24.470396] nouveau [ DRM] DCB outp 01: 04011310 00000028
[ 24.470400] nouveau [ DRM] DCB outp 02: 04011312 00000000
[ 24.470405] nouveau [ DRM] DCB outp 03: 01122321 000007a3
[ 24.470409] nouveau [ DRM] DCB conn 00: 1000
[ 24.470415] nouveau [ DRM] DCB conn 01: 1130
[ 24.470419] nouveau [ DRM] DCB conn 02: 0214
[ 24.471549] nouveau [ DRM] Saving VGA fonts
[ 24.527089] nouveau W[ DRM] unknown connector type 14
[ 24.528397] nouveau W[ DRM] TV-1 has no encoders, removing
[ 24.529750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.529755] [drm] No driver support for vblank timestamp query.
[ 24.529889] nouveau [ DRM] 0xD152: Parsing digital output script table
[ 24.583396] nouveau [ DRM] MM: using M2MF for buffer copies
[ 24.612035] tuner-simple 0-0061: creating new instance
[ 24.612054] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 24.620185] saa7134[0]: registered device video0 [v4l2]
[ 24.620353] saa7134[0]: registered device vbi0
[ 24.620459] saa7134[0]: registered device radio0
[ 24.632895] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo e68c0600
[ 24.633165] fbcon: nouveaufb (fb0) is primary device
[ 24.637380] saa7134 ALSA driver for DMA sound loaded
[ 24.637525] saa7134[0]/alsa: saa7134[0] at 0xd8010000 irq 17 registered as card -2
[ 24.657947] Console: switching to colour frame buffer device 160x64
[ 24.659817] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 24.659824] nouveau 0000:01:00.0: registered panic notifier
[ 24.659835] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 24.716325] usb 1-3.1.4: r8712u: CustomerID = 0x000a
[ 24.716336] usb 1-3.1.4: r8712u: MAC Address from efuse = 00:87:33:55:8b:c7
[ 24.716343] usb 1-3.1.4: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 24.716466] usbcore: registered new interface driver r8712u
[ 24.926247] dvb_init() allocating 1 frontend
[ 25.108058] tuner-simple 0-0061: attaching existing instance
[ 25.108062] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 25.108067] DVB: registering new adapter (saa7134[0])
[ 25.108079] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 25.145206] tda1004x: setting up plls for 53MHz sampling clock
[ 25.557038] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 26.298269] systemd-udevd[336]: renamed network interface wlan0 to wlan3
[ 26.879548] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 27.086029] tda1004x: found firmware revision 26 -- ok
[ 28.423382] init: failsafe main process (697) killed by TERM signal
[ 29.539623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.539632] Bluetooth: BNEP filters: protocol multicast
[ 29.539652] Bluetooth: BNEP socket layer initialized
[ 29.598084] Bluetooth: RFCOMM TTY layer initialized
[ 29.598111] Bluetooth: RFCOMM socket layer initialized
[ 29.598132] Bluetooth: RFCOMM ver 1.11
[ 30.299871] type=1400 audit(1409387023.071:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=833 comm="apparmor_parser"
[ 30.299894] type=1400 audit(1409387023.071:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
[ 30.301081] type=1400 audit(1409387023.073:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
[ 30.595687] type=1400 audit(1409387023.367:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=891 comm="apparmor_parser"
[ 30.595706] type=1400 audit(1409387023.367:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
[ 30.595719] type=1400 audit(1409387023.367:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
[ 30.597080] type=1400 audit(1409387023.369:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
[ 30.597093] type=1400 audit(1409387023.369:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
[ 30.597652] type=1400 audit(1409387023.369:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
[ 30.707774] type=1400 audit(1409387023.479:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=890 comm="apparmor_parser"
[ 30.793105] init: cups main process (862) killed by HUP signal
[ 30.793142] init: cups main process ended, respawning
[ 31.188670] init: samba-ad-dc main process (832) terminated with status 1
[ 31.635879] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[ 31.836333] cfg80211: Calling CRDA to update world regulatory domain
[ 32.539578] r8712u 1-3.1.4:1.0 wlan3: 1 RCR=0x153f00e
[ 32.540319] r8712u 1-3.1.4:1.0 wlan3: 2 RCR=0x553f00e
[ 32.657411] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[ 32.658219] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[ 32.961414] IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
[ 32.961495] cfg80211: World regulatory domain updated:
[ 32.961501] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.961507] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.961511] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.961515] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.961519] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.961523] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.999641] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.000614] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.905090] init: plymouth-upstart-bridge main process ended, respawning
[ 33.937889] init: plymouth-upstart-bridge main process (1368) terminated with status 1
[ 33.937925] init: plymouth-upstart-bridge main process ended, respawning
[ 53.521935] IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
[ 60.464208] audit_printk_skb: 87 callbacks suppressed
[ 60.464214] type=1400 audit(1409387053.236:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2245 comm="apparmor_parser"
[ 60.464228] type=1400 audit(1409387053.236:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2245 comm="apparmor_parser"
[ 60.464921] type=1400 audit(1409387053.236:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2245 comm="apparmor_parser"
[ 812.726463] type=1400 audit(1409387805.498:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2753 comm="apparmor_parser"
[ 812.726480] type=1400 audit(1409387805.498:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2753 comm="apparmor_parser"
[ 812.727262] type=1400 audit(1409387805.499:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2753 comm="apparmor_parser"
Ach ja - bestimmt wundert sich jetzt jemand: ich hab das System gestern abend auf 14.04 hochgezogen. Auch um rauszukriegen, ob das Problem damit möglicherweise gelöst wäre.
Ich möchte das alles wohlgemerkt jetzt mal nur sozusagen stellvertretend für arcimboldo hier auflisten, und um beim Lösen seines Problems zu helfen - nicht um sein Thema zu kapern. Ich bin mit meinem TangoStudio schließlich glücklich 😉.
Michael