Vorweg, es geht mir nur um aufgezeichte gpx-files.
Nach sudo modprobe pl2303 passiert garnichts.
dmesg zeigt ziemlich am Ende was über ttyUSB:
hecksumming: ko]
[ 1.890243] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.890350] r8169 0000:04:07.0 (unregistered net_device): not PCI Express
[ 1.890596] r8169 0000:04:07.0 eth1: RTL8110s at 0xffffc90000654000, 00:18:e7:17:45:ea, XID 04000000 IRQ 21
[ 1.890597] r8169 0000:04:07.0 eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.891059] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.891128] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.891131] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.891802] scsi0 : ahci
[ 1.891863] scsi1 : ahci
[ 1.891904] scsi2 : ahci
[ 1.892117] scsi3 : ahci
[ 1.892148] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 47
[ 1.892150] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 47
[ 1.892153] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 47
[ 1.892155] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 47
[ 1.893282] scsi4 : pata_atiixp
[ 1.893331] scsi5 : pata_atiixp
[ 1.893355] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.893357] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.908468] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.908473] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.910438] scsi6 : ahci
[ 1.912446] scsi7 : ahci
[ 1.912509] ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17
[ 1.912513] ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17
[ 1.912783] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
[ 1.916646] scsi8 : pata_jmicron
[ 1.918084] scsi9 : pata_jmicron
[ 1.918118] ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 1.918120] ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 1.941757] usb 1-2: New USB device found, idVendor=046d, idProduct=0825
[ 1.941762] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.941764] usb 1-2: SerialNumber: FA8793A0
[ 1.960548] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.076954] ata5.01: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.076958] ata5.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.076962] ata5.01: limited to UDMA/33 due to 40-wire cable
[ 2.081104] ata9.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 2.084970] ata5.01: configured for UDMA/33
[ 2.097113] ata9.00: configured for UDMA/33
[ 2.192618] tsc: Refined TSC clocksource calibration: 3113.727 MHz
[ 2.212643] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.216626] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.232667] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.384697] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.388688] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.394298] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[ 2.394301] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.399944] ata3.00: configured for UDMA/133
[ 2.402478] ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
[ 2.402482] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.403343] ata1.00: configured for UDMA/133
[ 2.403550] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
[ 2.403726] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.403767] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.403856] sd 0:0:0:0: [sda] Write Protect is off
[ 2.403860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.403876] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.403909] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 2.404007] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.404173] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.404175] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.404190] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404270] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.404425] scsi 4:0:1:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.404522] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 2.404523] sd 4:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.404561] sd 4:0:1:0: [sdc] Write Protect is off
[ 2.404563] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.404597] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404680] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.410984] sdb: sdb1 sdb2
[ 2.411265] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.412757] ata8.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
[ 2.416749] ata8.00: configured for UDMA/133
[ 2.418073] sdc: sdc1 < sdc5 sdc6 > sdc2
[ 2.418401] sd 4:0:1:0: [sdc] Attached SCSI disk
[ 2.418900] sda: sda1 < sda5 >
[ 2.419167] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.431744] scsi 7:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
[ 2.446594] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.446598] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.446717] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.446766] sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 2.451819] scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 2.459290] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.459428] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 2.459586] sr 8:0:0:0: Attached scsi generic sg4 type 5
[ 2.460800] firewire_core 0000:04:0e.0: created device fw0: GUID 00ebe421006cf049, S400
[ 2.580768] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.757915] usb 5-1: New USB device found, idVendor=046d, idProduct=c050
[ 2.757919] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.757921] usb 5-1: Product: USB-PS/2 Optical Mouse
[ 2.757922] usb 5-1: Manufacturer: Logitech
[ 2.762747] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.769052] usbcore: registered new interface driver usbhid
[ 2.769056] usbhid: USB HID core driver
[ 2.770572] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input3
[ 2.770647] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.988868] raid6: sse2x1 4196 MB/s
[ 3.024931] usb 5-3: new full-speed USB device number 3 using ohci-pci
[ 3.056882] raid6: sse2x2 6554 MB/s
[ 3.124913] raid6: sse2x4 7833 MB/s
[ 3.124915] raid6: using algorithm sse2x4 (7833 MB/s)
[ 3.124916] raid6: using intx1 recovery algorithm
[ 3.126153] xor: measuring software checksum speed
[ 3.164937] prefetch64-sse: 12739.000 MB/sec
[ 3.204953] generic_sse: 12028.000 MB/sec
[ 3.204955] xor: using function: prefetch64-sse (12739.000 MB/sec)
[ 3.213053] usb 5-3: New USB device found, idVendor=0a12, idProduct=0001
[ 3.213058] usb 5-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.213059] usb 5-3: Product: CSR8510 A10
[ 3.216207] bio: create slab <bio-1> at 1
[ 3.216522] Switched to clocksource tsc
[ 3.216785] Btrfs loaded
[ 3.218100] random: nonblocking pool is initialized
[ 3.340770] EXT4-fs (sdc2): INFO: recovery required on readonly filesystem
[ 3.340774] EXT4-fs (sdc2): write access will be enabled during recovery
[ 3.737241] usb 4-5: new low-speed USB device number 2 using ohci-pci
[ 3.822787] EXT4-fs (sdc2): recovery complete
[ 3.830944] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.906385] usb 4-5: New USB device found, idVendor=046a, idProduct=0023
[ 3.906389] usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 19.514490] Adding 5083132k swap on /dev/sdc6. Priority:-1 extents:1 across:5083132k FS
[ 19.589626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.589633] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.736170] systemd-udevd[308]: starting version 204
[ 20.265468] type=1400 audit(1412174045.908:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=418 comm="apparmor_parser"
[ 20.265475] type=1400 audit(1412174045.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
[ 20.265478] type=1400 audit(1412174045.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
[ 20.265766] lp: driver loaded but no devices found
[ 20.265882] type=1400 audit(1412174045.908:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
[ 20.265887] type=1400 audit(1412174045.908:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
[ 20.266097] type=1400 audit(1412174045.908:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
[ 20.267474] type=1400 audit(1412174045.908:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=425 comm="apparmor_parser"
[ 20.267480] type=1400 audit(1412174045.908:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
[ 20.267484] type=1400 audit(1412174045.908:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
[ 20.267909] type=1400 audit(1412174045.912:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
[ 20.344801] ppdev: user-space parallel port driver
[ 20.351177] wmi: Mapper loaded
[ 20.439477] Bluetooth: Core ver 2.17
[ 20.439498] NET: Registered protocol family 31
[ 20.439499] Bluetooth: HCI device and connection manager initialized
[ 20.439507] Bluetooth: HCI socket layer initialized
[ 20.439509] Bluetooth: L2CAP socket layer initialized
[ 20.439512] Bluetooth: SCO socket layer initialized
[ 20.449336] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[ 20.449343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.457290] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 20.457293] AMD IOMMUv2 functionality not available on this system
[ 20.550938] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.551027] sp5100_tco: PCI Revision ID: 0x41
[ 20.551060] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 20.551072] sp5100_tco: Last reboot was not triggered by watchdog.
[ 20.551126] sp5100_tco: initialized (0xffffc90000650b00). heartbeat=60 sec (nowayout=0)
[ 20.557029] MCE: In-kernel MCE decoding enabled.
[ 20.564707] usbcore: registered new interface driver btusb
[ 20.610430] EDAC MC: Ver: 3.0.0
[ 20.633078] AMD64 EDAC driver v3.4.0
[ 20.633107] EDAC amd64: DRAM ECC disabled.
[ 20.633111] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 20.633111] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 20.633111] (Note that use of the override may cause unknown side effects.)
[ 20.943943] kvm: Nested Virtualization enabled
[ 20.943949] kvm: Nested Paging enabled
[ 21.025006] Linux video capture interface: v2.00
[ 21.040077] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input4
[ 21.040170] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.0-5/input0
[ 21.040190] cherry 0003:046A:0023.0003: fixing up Cherry Cymotion report descriptor
[ 21.043453] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input5
[ 21.043712] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.0-5/input1
[ 21.178387] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 21.223600] hda-intel 0000:00:14.2: Using LPIB position fix
[ 21.228152] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 21.257333] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 21.257336] SKU: port_connectivity=0x1
[ 21.257337] SKU: enable_pcbeep=0x0
[ 21.257338] SKU: check_sum=0x00000005
[ 21.257339] SKU: customization=0x000000e6
[ 21.257340] SKU: external_amp=0x0
[ 21.257340] SKU: platform_type=0x0
[ 21.257341] SKU: swap=0x0
[ 21.257342] SKU: override=0x1
[ 21.257810] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 21.257811] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.257812] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 21.257813] mono: mono_out=0x0
[ 21.257814] dig-out=0x11/0x1e
[ 21.257814] inputs:
[ 21.257816] Front Mic=0x19
[ 21.257817] Rear Mic=0x18
[ 21.257818] Line=0x1a
[ 21.257818] dig-in=0x1f
[ 21.257820] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 21.257821] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 21.271101] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 21.271163] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 21.271199] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 21.271236] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 21.271270] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 21.271310] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 21.271345] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 21.271379] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 21.271600] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 21.271601] hda-intel 0000:01:00.1: Using LPIB position fix
[ 21.271640] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 21.273658] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 21.310399] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14
[ 22.119875] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.119879] Disabling lock debugging due to kernel taint
[ 22.125540] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 22.131069] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes.
[ 22.131226] <6>[fglrx] vendor: 1002 device: 68d8 count: 1
[ 22.131561] <6>[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 22.131825] <6>[fglrx] Kernel PAT support is enabled
[ 22.131842] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[ 22.350334] set resolution quirk: cval->res = 384
[ 22.350585] usbcore: registered new interface driver snd-usb-audio
[ 22.350603] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[ 22.364602] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input15
[ 22.364763] usbcore: registered new interface driver uvcvideo
[ 22.364764] USB Video Class driver (1.1.1)
[ 22.383828] init: udev-fallback-graphics main process (683) terminated with status 1
[ 22.866899] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
[ 31.294788] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
[ 34.075476] init: failsafe main process (795) killed by TERM signal
[ 34.739477] FS-Cache: Loaded
[ 34.792477] RPC: Registered named UNIX socket transport module.
[ 34.792480] RPC: Registered udp transport module.
[ 34.792481] RPC: Registered tcp transport module.
[ 34.792482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 34.915375] FS-Cache: Netfs 'nfs' registered for caching
[ 34.977669] audit_printk_skb: 6 callbacks suppressed
[ 34.977673] type=1400 audit(1412174060.612:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=931 comm="apparmor_parser"
[ 34.977678] type=1400 audit(1412174060.612:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=931 comm="apparmor_parser"
[ 34.978376] type=1400 audit(1412174060.616:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=932 comm="apparmor_parser"
[ 34.978382] type=1400 audit(1412174060.616:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser"
[ 34.978386] type=1400 audit(1412174060.616:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser"
[ 34.978777] type=1400 audit(1412174060.616:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser"
[ 34.978780] type=1400 audit(1412174060.616:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser"
[ 34.978986] type=1400 audit(1412174060.616:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser"
[ 34.979471] type=1400 audit(1412174060.616:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=931 comm="apparmor_parser"
[ 34.994674] type=1400 audit(1412174060.632:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=937 comm="apparmor_parser"
[ 35.018373] Bluetooth: RFCOMM TTY layer initialized
[ 35.018385] Bluetooth: RFCOMM socket layer initialized
[ 35.018395] Bluetooth: RFCOMM ver 1.11
[ 35.038203] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.038207] Bluetooth: BNEP filters: protocol multicast
[ 35.038216] Bluetooth: BNEP socket layer initialized
[ 35.316895] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 35.776272] init: autofs main process (1054) terminated with status 127
[ 35.776282] init: autofs main process ended, respawning
[ 36.175670] /dev/vmmon[1138]: Module vmmon: registered with major=10 minor=165
[ 36.175676] /dev/vmmon[1138]: Module vmmon: initialized
[ 36.282126] init: cups main process (949) killed by HUP signal
[ 36.282137] init: cups main process ended, respawning
[ 36.316690] Guest personality initialized and is inactive
[ 36.316740] VMCI host device registered (name=vmci, major=10, minor=57)
[ 36.316741] Initialized host personality
[ 36.419768] NET: Registered protocol family 40
[ 37.456173] r8169 0000:03:00.0 eth0: link down
[ 37.456211] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.456512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.475537] r8169 0000:04:07.0 eth1: link down
[ 37.475549] r8169 0000:04:07.0 eth1: link down
[ 37.475613] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 37.476117] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 37.483406] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
[ 37.484316] <6>[fglrx] Firegl kernel thread PID: 1267
[ 37.484399] <6>[fglrx] Firegl kernel thread PID: 1268
[ 37.484486] <6>[fglrx] Firegl kernel thread PID: 1269
[ 37.484582] <6>[fglrx] IRQ 49 Enabled
[ 37.494614] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 37.494616] <6>[fglrx] Reserved FB block: Unshared offset:f8a0000, size:4000
[ 37.494617] <6>[fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000
[ 37.494618] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 37.532525] init: samba-ad-dc main process (1225) terminated with status 1
[ 37.788693] /dev/vmnet: open called by PID 1272 (vmnet-netifup)
[ 37.788703] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 37.788715] /dev/vmnet: port on hub 1 successfully opened
[ 37.968365] /dev/vmnet: open called by PID 1275 (vmnet-dhcpd)
[ 37.968379] /dev/vmnet: port on hub 1 successfully opened
[ 37.971917] /dev/vmnet: open called by PID 1285 (vmnet-natd)
[ 37.971925] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 37.971938] /dev/vmnet: port on hub 8 successfully opened
[ 37.973999] /dev/vmnet: open called by PID 1286 (vmnet-netifup)
[ 37.974011] /dev/vmnet: port on hub 8 successfully opened
[ 38.031784] init: plymouth-upstart-bridge main process ended, respawning
[ 38.035736] /dev/vmnet: open called by PID 1290 (vmnet-dhcpd)
[ 38.035751] /dev/vmnet: port on hub 8 successfully opened
[ 38.460569] vboxdrv: Found 2 processor cores.
[ 38.461292] vboxdrv: fAsync=0 offMin=0x367 offMax=0x1284
[ 38.461357] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 38.461358] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007).
[ 38.728705] vboxpci: IOMMU not found (not registered)
[ 40.589577] r8169 0000:04:07.0 eth1: link up
[ 40.589587] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 40.589768] /dev/vmnet: open called by PID 1258 (vmnet-bridge)
[ 40.589776] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 40.589790] /dev/vmnet: port on hub 0 successfully opened
[ 40.589801] bridge-eth1: up
[ 40.589803] bridge-eth1: attached
[ 40.636243] NET: Unregistered protocol family 40
[ 40.686884] /dev/vmmon[1678]: Module vmmon: unloaded
[ 40.751807] bridge-eth1: disabling the bridge
[ 40.764302] bridge-eth1: down
[ 40.764310] bridge-eth1: detached
[ 40.790066] userif-2: sent link down event.
[ 40.790071] userif-2: sent link up event.
[ 65.173385] audit_printk_skb: 150 callbacks suppressed
[ 65.173389] type=1400 audit(1412174090.803:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3249 comm="apparmor_parser"
[ 65.173396] type=1400 audit(1412174090.803:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3249 comm="apparmor_parser"
[ 65.173790] type=1400 audit(1412174090.803:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3249 comm="apparmor_parser"
[ 66.617082] /dev/vmmon[3284]: Module vmmon: registered with major=10 minor=165
[ 66.617090] /dev/vmmon[3284]: Module vmmon: initialized
[ 66.657587] Guest personality initialized and is inactive
[ 66.662727] VMCI host device registered (name=vmci, major=10, minor=57)
[ 66.662730] Initialized host personality
[ 66.712975] NET: Registered protocol family 40
[ 66.816636] /dev/vmnet: open called by PID 3363 (vmnet-bridge)
[ 66.816644] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 66.816657] /dev/vmnet: port on hub 0 successfully opened
[ 66.816666] bridge-eth1: up
[ 66.816669] bridge-eth1: attached
[ 68.327665] /dev/vmnet: open called by PID 3412 (vmnet-netifup)
[ 68.327675] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 68.327688] /dev/vmnet: port on hub 1 successfully opened
[ 68.519391] /dev/vmnet: open called by PID 3415 (vmnet-dhcpd)
[ 68.519404] /dev/vmnet: port on hub 1 successfully opened
[ 68.523847] /dev/vmnet: open called by PID 3426 (vmnet-natd)
[ 68.523858] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 68.523871] /dev/vmnet: port on hub 8 successfully opened
[ 68.585541] userif-3: sent link down event.
[ 68.585546] userif-3: sent link up event.
[ 68.586809] /dev/vmnet: open called by PID 3427 (vmnet-netifup)
[ 68.586823] /dev/vmnet: port on hub 8 successfully opened
[ 69.389789] /dev/vmnet: open called by PID 3431 (vmnet-dhcpd)
[ 69.389802] /dev/vmnet: port on hub 8 successfully opened
[ 70.860408] init: plymouth-stop pre-start process (3539) terminated with status 1
[ 469.798241] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 469.936554] usb 3-4: New USB device found, idVendor=1234, idProduct=ffff
[ 469.936567] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 469.936574] usb 3-4: Product: USB DISK 2.0
[ 469.936580] usb 3-4: Manufacturer:
[ 469.936585] usb 3-4: SerialNumber: 90A31A00FFAF0003
[ 469.970242] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 469.970331] scsi10 : usb-storage 3-4:1.0
[ 469.970775] usbcore: registered new interface driver usb-storage
[ 471.005617] scsi 10:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 471.006324] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 471.652402] sd 10:0:0:0: [sdd] 4169728 512-byte logical blocks: (2.13 GB/1.98 GiB)
[ 471.655245] sd 10:0:0:0: [sdd] Write Protect is off
[ 471.655259] sd 10:0:0:0: [sdd] Mode Sense: 03 41 00 00
[ 471.658069] sd 10:0:0:0: [sdd] No Caching mode page found
[ 471.658083] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 471.668665] sd 10:0:0:0: [sdd] No Caching mode page found
[ 471.668678] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 471.696188] sdd:
[ 471.703953] sd 10:0:0:0: [sdd] No Caching mode page found
[ 471.703966] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 471.703975] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 472.090530] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 655.455388] usb 3-4: USB disconnect, device number 2
[ 687.886822] usb 7-3: new full-speed USB device number 2 using ohci-pci
[ 688.053957] usb 7-3: New USB device found, idVendor=067b, idProduct=2303
[ 688.053970] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 688.053977] usb 7-3: Product: USB-Serial Controller D
[ 688.053983] usb 7-3: Manufacturer: Prolific Technology Inc.
[ 688.096686] usbcore: registered new interface driver usbserial
[ 688.096979] usbcore: registered new interface driver usbserial_generic
[ 688.097273] usbserial: USB Serial support registered for generic
[ 688.100522] usbcore: registered new interface driver pl2303
[ 688.100542] usbserial: USB Serial support registered for pl2303
[ 688.100578] pl2303 7-3:1.0: pl2303 converter detected
[ 688.121143] usb 7-3: pl2303 converter now attached to ttyUSB0
[ 1676.229576] usb 7-3: USB disconnect, device number 2
[ 1676.230012] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 1676.230060] pl2303 7-3:1.0: device disconnected
[ 1688.781475] usb 7-4: new full-speed USB device number 3 using ohci-pci
[ 1688.948601] usb 7-4: New USB device found, idVendor=067b, idProduct=2303
[ 1688.948614] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1688.948621] usb 7-4: Product: USB-Serial Controller D
[ 1688.948627] usb 7-4: Manufacturer: Prolific Technology Inc.
[ 1688.950808] pl2303 7-4:1.0: pl2303 converter detected
[ 1688.973064] usb 7-4: pl2303 converter now attached to ttyUSB0
[ 1823.690413] type=1400 audit(1412175848.760:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5501 comm="apparmor_parser"
[ 1823.690423] type=1400 audit(1412175848.760:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5501 comm="apparmor_parser"
[ 1823.690928] type=1400 audit(1412175848.760:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5501 comm="apparmor_parser