Hallo Community,
ich habe folgendes Problem :
Auf meiner 14.04 LTS Büchse kann ich seit dem Update (bzw. Neuinstallation) von 12.04 keine USB-Sticks mehr mounten (wobei es vorher auch nur mit Zeitverzug geklappt hat).
Eckdaten :
Ubuntu 14.04.1 LTS Xfce
uname -a :
1 | Linux 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux |
Problem :
Wenn ich einen USB in den Slot (habe 4 USB 3.0 Slots über Firewire und einen USB 2.0 Slot über Cardreader) stecke, dann passiert nichts.
Ausgabe dmesg
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 | [ 4777.023291] usb 1-1.4: new high-speed USB device number 7 using ehci-pci [ 4777.211568] usb 1-1.4: New USB device found, idVendor=0011, idProduct=7788 [ 4777.211573] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4777.211576] usb 1-1.4: Product: Mass Storage [ 4777.211578] usb 1-1.4: Manufacturer: Generic [ 4777.211580] usb 1-1.4: SerialNumber: A46EAB6E [ 4777.211972] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 4777.212104] scsi22 : usb-storage 1-1.4:1.0 [ 4778.211774] scsi 22:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2 [ 4778.212066] sd 22:0:0:0: Attached scsi generic sg11 type 0 [ 4778.213358] sd 22:0:0:0: [sdi] 16384000 512-byte logical blocks: (8.38 GB/7.81 GiB) [ 4778.213958] sd 22:0:0:0: [sdi] Write Protect is off [ 4778.213966] sd 22:0:0:0: [sdi] Mode Sense: 03 00 00 00 [ 4778.214581] sd 22:0:0:0: [sdi] No Caching mode page found [ 4778.214587] sd 22:0:0:0: [sdi] Assuming drive cache: write through [ 4778.217441] sd 22:0:0:0: [sdi] No Caching mode page found [ 4778.217446] sd 22:0:0:0: [sdi] Assuming drive cache: write through [ 4778.367341] sdi: sdi1 [ 4778.370400] sd 22:0:0:0: [sdi] No Caching mode page found [ 4778.370406] sd 22:0:0:0: [sdi] Assuming drive cache: write through [ 4778.370409] sd 22:0:0:0: [sdi] Attached SCSI removable disk |
Ausgabe lsusb
1 2 3 | *** Bus 001 Device 006: ID 0011:7788 *** |
Der Stick wird angezeigt, jedoch erscheint keine Bezeichnung.
Ausgabe lsusb -v
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 | Bus 001 Device 006: ID 0011:7788 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0011 idProduct 0x7788 bcdDevice 1.03 iManufacturer 1 Generic iProduct 2 Mass Storage iSerial 3 A46EAB6E bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) |
Ausgabe lsscsi
1 | [21:0:0:0] disk Generic Flash Disk 8.00 /dev/sdi |
Gparted startet nicht, bzw. sucht sich nen Wolf und kommt zu keinem Ende.
Manuelles Mounten mittels
1 | sudo mount -o loop -t exFAT /dev/sdi /mnt/usb/ |
Hängt sich auch auf und gibt keine Rückgabe.
Der USB-Stick wird sowohl am USB 2.0 als auch 3.0 Slot erkannt aber es ist nicht möglich diesen zu mounten oder auch nur weitere Infos zu erhalten.
Ausgabe lsblk
1 2 | sdi 8:128 1 7,8G 0 disk └─sdi1 8:129 1 7,8G 0 part |
Ich habe das System als Dual-Boot aufgesetzt. Unter Win7 erkennt er alle USB-Sticks problemlos sowohl in 2.0 als auch 3.0. Also kann es ja eigentlich nicht an der Hardware liegen.
1 | sudo gpart /dev/sdi |
sucht sich auch nen Wolf und hängt sich auf. Keine Rückgabe.
Ich habe keine Ahnung mehr woran es liegen könnte. Dies geschieht mit allen USB-Sticks.
Habt ihr damit vielleicht Erfahrung und könnt mir weiterhelfen ?
Wäre sehr dankbar dafür.
Liebe Grüße
z4ck