Hallo,
wenn ich mein Sony Handy über USB mit meinem Computer verbinden will, wird das Handy nicht angezeigt. Was kann ich tun? Betriebsystem: elementary os Luna
Grüße
Anmeldungsdatum: Beiträge: 10 |
Hallo, wenn ich mein Sony Handy über USB mit meinem Computer verbinden will, wird das Handy nicht angezeigt. Was kann ich tun? Betriebsystem: elementary os Luna Grüße |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Analysieren: dmesg. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
Kenn mich noch nicht so gut aus mit dem Terminal... Welche Option von dmesg soll ich verwenden? |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Gar keine, einfach dmesg Erst anstecken, danach siehst du dir die letzte Seite an. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
Das sind die letzten paar Zeilen... [ 2430.616194] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2430.616235] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 2430.616293] ehci_hcd 0000:00:1a.0: PME# enabled [ 2430.631997] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xb3a18000-0xb3a183ff] (PCI address [0xb3a18000-0xb3a183ff]) [ 2430.632027] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 2430.632062] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 2430.632156] ehci_hcd 0000:00:1d.0: PME# disabled [ 2430.632173] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2430.632187] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2430.632236] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 2430.632295] ehci_hcd 0000:00:1d.0: PME# enabled [ 2430.636076] xhci_hcd 0000:00:14.0: PME# disabled [ 2430.636097] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 2430.647955] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xb3a19000-0xb3a193ff] (PCI address [0xb3a19000-0xb3a193ff]) [ 2430.647987] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 2430.648023] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 2430.648111] ehci_hcd 0000:00:1a.0: PME# disabled [ 2430.648128] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2430.648142] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2430.648184] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 2430.648243] ehci_hcd 0000:00:1a.0: PME# enabled [ 2430.867732] usb 3-3: new high-speed USB device number 4 using xhci_hcd [ 2434.288099] xhci_hcd 0000:00:14.0: PME# enabled |
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
wie geht´s jetzt weiter? ☺ |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Gute Frage. Ich kam noch nicht dazu. Er hat in den letzten zwei Zeilen den USB-Treiber geladen und zwar den für USB 3.0. Hast du vielleicht noch USB 2.0 Anschlüsse, an denen du das Handy testen kannst? (evtl. sind die 3.0 mit blauem Plastik drin und die andren anders). Ansonsten müssen wir noch ein Log checken: Neu anstecken und dann: tail -n 30 /var/log/syslog Hat das Handy vorher schon mal am USB von Linux funktioniert? Hast du USB freigegeben am Handy? |
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
Ich habe zwar einen USB 3.0 Anschluss, aber ich hatte das Handy an einem USB 2.0 Slot angeschlossen, komisch dass da was über einen 3.0 rauskommt... Das Handy hat schonmal funktioniert, allerdings musste ich da auch nichts am Handy selbst einstellen, habe da einfach das Handy eingesteckt und es wurde gleich erkannt. Hier die Ausgabe zu tail -n 30 /var/log/syslog Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288500] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xb3a19000-0xb3a193ff] (PCI address [0xb3a19000-0xb3a193ff]) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288533] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x107) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288569] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288662] ehci_hcd 0000:00:1a.0: PME# disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288679] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288693] ehci_hcd 0000:00:1a.0: setting latency timer to 64 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288722] ehci_hcd 0000:00:1a.0: PCI INT A disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.288781] ehci_hcd 0000:00:1a.0: PME# enabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304467] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xb3a18000-0xb3a183ff] (PCI address [0xb3a18000-0xb3a183ff]) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304497] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304532] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304625] ehci_hcd 0000:00:1d.0: PME# disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304642] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304657] ehci_hcd 0000:00:1d.0: setting latency timer to 64 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304704] ehci_hcd 0000:00:1d.0: PCI INT A disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.304763] ehci_hcd 0000:00:1d.0: PME# enabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320424] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xb3a19000-0xb3a193ff] (PCI address [0xb3a19000-0xb3a193ff]) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320454] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x107) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320490] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320598] ehci_hcd 0000:00:1a.0: PME# disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320614] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320628] ehci_hcd 0000:00:1a.0: setting latency timer to 64 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320656] ehci_hcd 0000:00:1a.0: PCI INT A disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.320714] ehci_hcd 0000:00:1a.0: PME# enabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.332533] xhci_hcd 0000:00:14.0: PME# disabled Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.332554] xhci_hcd 0000:00:14.0: setting latency timer to 64 Nov 8 21:04:06 justin-Aspire-V3-571G kernel: [21458.564125] usb 3-3: new high-speed USB device number 9 using xhci_hcd Nov 8 21:04:06 justin-Aspire-V3-571G mtp-probe: checking bus 3, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3" Nov 8 21:04:06 justin-Aspire-V3-571G mtp-probe: bus: 3, device: 9 was an MTP device Nov 8 21:04:10 justin-Aspire-V3-571G kernel: [21462.368072] xhci_hcd 0000:00:14.0: PME# enabled
|
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Schon besser: mtp-probe: bus: 3, device: 9 was an MTP devic Das ist das richtige Stichwort, ich glaube aber, für das alte 12.04 gibt es nur ein PPA? Schau mal nach einer mtp-Software wie gmtp. Evtl. teste es mal mit einem Live-USB/ Live-CD und den neuen Versionen. Evtl. musst du dazu direkt (X/K)Ubuntu testen/ verwenden. |