Ausserdem vielleicht noch mal mit anderen Kabeln und an anderen USB-Buchsen testen. Lief das Gerät schonmal an irgendeinem Rechner im USB-Modus?
Boss ME-25
Anmeldungsdatum: Beiträge: 999 Wohnort: zwischen den ohren |
|
Anmeldungsdatum: Beiträge: 7 |
Hallo, ich bin hier sehr neu, genauso wie im Bereich Ubuntu/Mint. Ich selbst nutze das Mint. War vorher natürlich wie viele andere auch verwirrter Windows (aaaahhh) Nutzer und bin dann zu Mint gewechselt. Ich habe auch so ein Boss ME-25 und würde es gerne mit dem Mint betreiben. In Verbindung mit Rosegarden müsste das ja gut mit dem Aufnehmen funktionieren. Bei mir hat er folgendes erkannt (mit dem Befehl lsusb): mark@Soulreaper ~ $ lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 1a2c:0021 China Resource Semico Co., Ltd Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 003 Device 003: ID 0582:0113 Roland Corp. ME-25 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 002: ID 1e68:0050 TrekStor GmbH & Co. KG Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 002: ID 047f:c010 Plantronics, Inc. Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub so nun kenn ich mich mit Rosegarden leider auch noch nicht so aus aber es scheint nicht in der Liste der Midigeräte aufzutauchen ... kann mir da wer weiterhelfen? Gruß Souli |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Willkommen! Leider nein. Evtl. bringt dich nach dem (Neu-)Anstecken dmesg weiter. Grüße, Benno |
Anmeldungsdatum: Beiträge: 7 |
Da kommt viel Text und i hab KEINE Ahnung nach was ich schauen muss! [ 1.761407] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000 [ 1.821037] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.821040] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.821042] usb usb5: Product: OHCI PCI host controller [ 1.821043] usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd [ 1.821045] usb usb5: SerialNumber: 0000:00:13.0 [ 1.821143] hub 5-0:1.0: USB hub found [ 1.821150] hub 5-0:1.0: 3 ports detected [ 1.821329] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.821333] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.821345] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000 [ 1.880998] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.881001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.881003] usb usb6: Product: OHCI PCI host controller [ 1.881005] usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd [ 1.881006] usb usb6: SerialNumber: 0000:00:13.1 [ 1.881104] hub 6-0:1.0: USB hub found [ 1.881112] hub 6-0:1.0: 3 ports detected [ 1.881289] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.881293] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.881305] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000 [ 1.940887] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.940960] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.940963] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940965] usb usb7: Product: OHCI PCI host controller [ 1.940967] usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd [ 1.940968] usb usb7: SerialNumber: 0000:00:14.5 [ 1.941064] hub 7-0:1.0: USB hub found [ 1.941072] hub 7-0:1.0: 2 ports detected [ 1.941137] ohci-platform: OHCI generic platform driver [ 1.941144] uhci_hcd: USB Universal Host Controller Interface driver [ 1.941207] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.941212] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 1.947436] isapnp: No Plug & Play device found [ 2.048677] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 2.048684] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 2.048697] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 2.048702] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 2.048708] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 2.048810] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.048812] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.048814] usb usb8: Product: xHCI Host Controller [ 2.048816] usb usb8: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 2.048817] usb usb8: SerialNumber: 0000:03:00.0 [ 2.048908] hub 8-0:1.0: USB hub found [ 2.048916] hub 8-0:1.0: 2 ports detected [ 2.048975] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.048978] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 2.052029] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.052031] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.052032] usb usb9: Product: xHCI Host Controller [ 2.052034] usb usb9: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 2.052035] usb usb9: SerialNumber: 0000:03:00.0 [ 2.052203] hub 9-0:1.0: USB hub found [ 2.052210] hub 9-0:1.0: 2 ports detected [ 2.090038] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271 [ 2.090041] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 2.090045] usb 1-1: Product: USB2.0 WLAN [ 2.090047] usb 1-1: Manufacturer: ATHEROS [ 2.090048] usb 1-1: SerialNumber: 12345 [ 2.090114] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.090509] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.090514] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.090632] mousedev: PS/2 mouse device common for all mice [ 2.090770] rtc_cmos 00:02: RTC can wake from S4 [ 2.090889] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.090914] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.090968] device-mapper: uevent: version 1.0.3 [ 2.091035] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.091053] platform eisa.0: Probing EISA bus 0 [ 2.091055] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.091057] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.091058] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.091060] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.091062] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.091063] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.091065] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.091066] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.091068] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.091069] platform eisa.0: EISA: Detected 0 cards [ 2.091075] cpufreq-nforce2: No nForce2 chipset. [ 2.091079] ledtrig-cpu: registered to indicate activity on CPUs [ 2.091182] TCP: cubic registered [ 2.091257] NET: Registered protocol family 10 [ 2.091405] NET: Registered protocol family 17 [ 2.091411] Key type dns_resolver registered [ 2.091616] Using IPI No-Shortcut mode [ 2.091730] Loading compiled-in X.509 certificates [ 2.094435] Loaded X.509 cert 'Magrathea: Glacier signing key: 5682f337b8a0a17eef58c6ac5e9a85712c9208df' [ 2.094442] registered taskstats version 1 [ 2.097069] Key type trusted registered [ 2.099048] Key type encrypted registered [ 2.101002] AppArmor: AppArmor sha1 policy hashing enabled [ 2.101005] IMA: No TPM chip found, activating TPM-bypass! [ 2.101234] regulator-dummy: disabling [ 2.101297] Magic number: 10:863:148 [ 2.101308] bdi 1:0: hash matches [ 2.101319] pci 0000:00:14.1: hash matches [ 2.101324] acpi device:19: hash matches [ 2.101372] rtc_cmos 00:02: setting system clock to 2014-12-19 22:06:48 UTC (1419026808) [ 2.101476] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.101949] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.101950] EDD information not available. [ 2.101971] PM: Hibernation image not present or could not be loaded. [ 2.102268] Freeing unused kernel memory: 872K (c19ae000 - c1a88000) [ 2.102317] Write protecting the kernel text: 6512k [ 2.102397] Write protecting the kernel read-only data: 2756k [ 2.102398] NX-protecting the kernel data: 5776k [ 2.116723] systemd-udevd[111]: starting version 204 [ 2.146138] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.146147] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.146364] r8169 0000:02:00.0: irq 48 for MSI/MSI-X [ 2.146546] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf8448000, c8:60:00:2a:87:f8, XID 0c900800 IRQ 48 [ 2.146549] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.147276] scsi0 : pata_atiixp [ 2.147370] scsi1 : pata_atiixp [ 2.147407] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.147409] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.147445] ahci 0000:00:11.0: version 3.0 [ 2.147666] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.147670] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.148378] scsi2 : ahci [ 2.148459] scsi3 : ahci [ 2.148535] scsi4 : ahci [ 2.148619] scsi5 : ahci [ 2.148663] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22 [ 2.148666] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22 [ 2.148670] ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22 [ 2.148673] ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22 [ 2.472686] ata6: SATA link down (SStatus 0 SControl 300) [ 2.472736] ata4: SATA link down (SStatus 0 SControl 300) [ 2.568596] tsc: Refined TSC clocksource calibration: 3616.236 MHz [ 2.572689] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 2.636566] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.638804] ata3.00: ATA-8: WDC WD10EADS-11M2B2, 80.00A80, max UDMA/133 [ 2.638807] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.641017] ata3.00: configured for UDMA/133 [ 2.641236] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-11M 80.0 PQ: 0 ANSI: 5 [ 2.641359] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.641362] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.641387] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.641462] sd 2:0:0:0: [sda] Write Protect is off [ 2.641466] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.641517] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.644475] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.648233] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN00, max UDMA/100 [ 2.649676] ata5.00: configured for UDMA/100 [ 2.656733] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN00 PQ: 0 ANSI: 5 [ 2.659568] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.659574] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.659736] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.659821] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.702340] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.702981] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.706572] usb 2-3: New USB device found, idVendor=058f, idProduct=6366 [ 2.706576] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.706582] usb 2-3: Product: Mass Storage Device [ 2.706584] usb 2-3: Manufacturer: Generic [ 2.706586] usb 2-3: SerialNumber: 058F63666471 [ 2.714691] usb-storage 2-3:1.0: USB Mass Storage device detected [ 2.714783] scsi6 : usb-storage 2-3:1.0 [ 2.714855] usbcore: registered new interface driver usb-storage [ 2.968445] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 3.145380] usb 4-1: New USB device found, idVendor=1a2c, idProduct=0021 [ 3.145388] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.145393] usb 4-1: Product: USB Keykoard [ 3.145397] usb 4-1: Manufacturer: USB [ 3.154918] hidraw: raw HID events driver (C) Jiri Kosina [ 3.169412] usbcore: registered new interface driver usbhid [ 3.169415] usbhid: USB HID core driver [ 3.173322] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5 [ 3.173425] hid-generic 0003:1A2C:0021.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:12.1-1/input0 [ 3.568170] Switched to clocksource tsc [ 3.640045] usb 8-2: new full-speed USB device number 2 using xhci_hcd [ 3.681185] usb 8-2: New USB device found, idVendor=047f, idProduct=c010 [ 3.681193] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 3.681198] usb 8-2: Product: Plantronics GameCom 780 [ 3.681202] usb 8-2: Manufacturer: Plantronics [ 3.691277] input: Plantronics Plantronics GameCom 780 as /devices/pci0000:00/0000:00:0a.0/0000:03:00.0/usb8/8-2/8-2:1.3/input/input6 [ 3.691472] hid-generic 0003:047F:C010.0003: input,hidraw1: USB HID v1.00 Device [Plantronics Plantronics GameCom 780] on usb-0000:03:00.0-2/input3 [ 3.712889] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 3.713132] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.714433] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3.800156] usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.818466] usb 9-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 3.822207] usb 9-1: New USB device found, idVendor=1e68, idProduct=0050 [ 3.822210] usb 9-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.822212] usb 9-1: Product: DS maxi light 30 [ 3.822214] usb 9-1: Manufacturer: TrekStor [ 3.822215] usb 9-1: SerialNumber: 20110902177C [ 3.822914] usb-storage 9-1:1.0: USB Mass Storage device detected [ 3.822968] scsi7 : usb-storage 9-1:1.0 [ 3.955851] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 4.129778] usb 3-2: New USB device found, idVendor=0582, idProduct=0113 [ 4.129786] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.129791] usb 3-2: Product: ME-25 [ 4.129795] usb 3-2: Manufacturer: BOSS [ 4.395520] usb 3-3: new low-speed USB device number 3 using ohci-pci [ 4.562505] usb 3-3: New USB device found, idVendor=093a, idProduct=2510 [ 4.562513] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.562518] usb 3-3: Product: USB OPTICAL MOUSE [ 4.562522] usb 3-3: Manufacturer: PIXART [ 4.572796] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input7 [ 4.572908] hid-generic 0003:093A:2510.0004: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0 [ 4.820787] scsi 7:0:0:0: Direct-Access TrekStor DS maxi light 30 CC4B PQ: 0 ANSI: 5 [ 4.821023] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 4.821153] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 4.821998] sd 7:0:0:0: [sdc] Write Protect is off [ 4.822002] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 4.822618] sd 7:0:0:0: [sdc] No Caching mode page found [ 4.822620] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.824237] sd 7:0:0:0: [sdc] No Caching mode page found [ 4.824239] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 13.167014] hid-generic 0003:1A2C:0021.0002: usb_submit_urb(ctrl) failed: -1 [ 13.167039] hid-generic 0003:1A2C:0021.0002: timeout initializing reports [ 13.167224] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input8 [ 13.167370] hid-generic 0003:1A2C:0021.0002: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:12.1-1/input1 [ 13.229145] sdc: sdc1 [ 13.230934] sd 7:0:0:0: [sdc] No Caching mode page found [ 13.230937] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 13.230939] sd 7:0:0:0: [sdc] Attached SCSI disk [ 13.287478] random: nonblocking pool is initialized [ 15.048239] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 32.287717] Adding 8369148k swap on /dev/sda6. Priority:-1 extents:1 across:8369148k FS [ 32.371537] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.632288] systemd-udevd[383]: starting version 204 [ 32.887409] lp: driver loaded but no devices found [ 32.900288] wmi: Mapper loaded [ 32.901395] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 32.903387] ppdev: user-space parallel port driver [ 32.912981] parport_pc 00:05: reported by Plug and Play ACPI [ 32.913035] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 32.922054] [drm] Initialized drm 1.1.0 20060810 [ 32.934144] ATK0110 ATK0110:00: Overriding interface detection [ 32.941455] nvidia: module license 'NVIDIA' taints kernel. [ 32.941459] Disabling lock debugging due to kernel taint [ 32.964418] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 32.986740] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 32.988812] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 32.988823] NVRM: loading NVIDIA UNIX x86 Kernel Module 331.113 Mon Dec 1 20:14:01 PST 2014 [ 32.997875] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251) [ 32.997881] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SMRG 2 (20131115/utaddress-251) [ 32.997885] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20131115/utaddress-251) [ 32.997890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 33.002264] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 33.002329] sp5100_tco: PCI Revision ID: 0x3c [ 33.002347] sp5100_tco: failed to find MMIO address, giving up. [ 33.002587] lp0: using parport0 (interrupt-driven). [ 33.008454] cfg80211: Calling CRDA to update world regulatory domain [ 33.102552] hda-intel 0000:00:14.2: Using LPIB position fix [ 33.105891] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 33.122543] SKU: Nid=0x1d sku_cfg=0x4004c601 [ 33.122546] SKU: port_connectivity=0x1 [ 33.122547] SKU: enable_pcbeep=0x0 [ 33.122549] SKU: check_sum=0x00000004 [ 33.122550] SKU: customization=0x000000c6 [ 33.122551] SKU: external_amp=0x0 [ 33.122553] SKU: platform_type=0x0 [ 33.122554] SKU: swap=0x0 [ 33.122555] SKU: override=0x1 [ 33.122833] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 33.122834] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 33.122836] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 33.122837] mono: mono_out=0x0 [ 33.122838] dig-out=0x11/0x0 [ 33.122839] inputs: [ 33.122841] Front Mic=0x19 [ 33.122843] Rear Mic=0x18 [ 33.122844] Line=0x1a [ 33.122846] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d [ 33.122847] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887 [ 33.136310] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 33.139333] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested [ 33.139428] usbcore: registered new interface driver ath9k_htc [ 33.143312] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 33.143408] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 33.143498] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 33.143607] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 33.144018] hda_intel: Disabling MSI [ 33.144028] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 33.144051] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 33.166929] kvm: Nested Virtualization enabled [ 33.166933] kvm: Nested Paging enabled [ 33.169482] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 33.175704] device-mapper: multipath: version 1.6.0 loaded [ 33.376716] snd-usb-audio: probe of 3-2:1.2 failed with error -5 [ 33.376733] usbcore: registered new interface driver snd-usb-audio [ 33.632555] cfg80211: World regulatory domain updated: [ 33.632559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.632561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.632564] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.632567] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.632569] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.632571] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.639876] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 33.650501] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17 [ 33.650583] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 33.650654] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 33.650729] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 33.876609] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits [ 34.106932] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 [ 34.106935] ath: EEPROM regdomain: 0x809c [ 34.106936] ath: EEPROM indicates we should expect a country code [ 34.106937] ath: doing EEPROM country->regdmn map search [ 34.106939] ath: country maps to regdmn code: 0x52 [ 34.106940] ath: Country alpha2 being used: CN [ 34.106941] ath: Regpair used: 0x52 [ 34.115817] ieee80211 phy0: Atheros AR9271 Rev:1 [ 34.115828] cfg80211: Calling CRDA for country: CN [ 34.120943] cfg80211: Regulatory domain changed to country: CN [ 34.120945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 34.120947] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 34.120949] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 34.120950] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm) [ 34.120952] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm) [ 34.120953] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm) [ 35.739236] init: udev-fallback-graphics main process (704) terminated with status 1 [ 35.950312] init: failsafe main process (762) killed by TERM signal [ 36.198407] Bluetooth: Core ver 2.17 [ 36.198422] NET: Registered protocol family 31 [ 36.198424] Bluetooth: HCI device and connection manager initialized [ 36.198430] Bluetooth: HCI socket layer initialized [ 36.198433] Bluetooth: L2CAP socket layer initialized [ 36.198437] Bluetooth: SCO socket layer initialized [ 36.203936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.203938] Bluetooth: BNEP filters: protocol multicast [ 36.203942] Bluetooth: BNEP socket layer initialized [ 36.218377] Bluetooth: RFCOMM TTY layer initialized [ 36.218386] Bluetooth: RFCOMM socket layer initialized [ 36.218391] Bluetooth: RFCOMM ver 1.11 [ 36.742670] init: cups main process (889) killed by HUP signal [ 36.742682] init: cups main process ended, respawning [ 37.046200] r8169 0000:02:00.0 eth0: link down [ 37.046238] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.046590] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.255324] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.255610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 38.626403] wlan0: authenticate with 24:65:11:bb:e4:12 [ 38.909817] wlan0: send auth to 24:65:11:bb:e4:12 (try 1/3) [ 38.914783] wlan0: authenticated [ 38.915001] wlan0: associate with 24:65:11:bb:e4:12 (try 1/3) [ 38.920131] wlan0: RX AssocResp from 24:65:11:bb:e4:12 (capab=0x431 status=0 aid=1) [ 38.928106] wlan0: associated [ 38.928128] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.146946] init: samba-ad-dc main process (945) terminated with status 1 [ 39.608304] init: plymouth-upstart-bridge main process ended, respawning [ 39.613375] init: plymouth-upstart-bridge main process (1395) terminated with status 1 [ 39.613386] init: plymouth-upstart-bridge main process ended, respawning [ 40.217403] init: plymouth-stop pre-start process (1505) terminated with status 1 [ 40.870497] nvidia 0000:01:00.0: irq 49 for MSI/MSI-X [ 3463.475962] python[2708]: segfault at d1aa435c ip b6f91630 sp bf903330 error 5 in libapt-pkg.so.4.12.0[b6f3e000+144000] [ 3485.229860] wlan0: deauthenticated from 24:65:11:bb:e4:12 (Reason: 6) [ 3485.487463] cfg80211: Calling CRDA to update world regulatory domain [ 3485.487804] wlan0: authenticate with 24:65:11:bb:e4:12 [ 3485.682018] wlan0: send auth to 24:65:11:bb:e4:12 (try 1/3) [ 3485.682365] cfg80211: World regulatory domain updated: [ 3485.682372] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3485.682378] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3485.682382] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3485.682386] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3485.682390] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3485.682393] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3485.696389] wlan0: authenticated [ 3485.700759] wlan0: associate with 24:65:11:bb:e4:12 (try 1/3) [ 3485.704825] wlan0: RX AssocResp from 24:65:11:bb:e4:12 (capab=0x431 status=0 aid=1) [ 3485.712085] wlan0: associated [ 4146.417726] wlan0: deauthenticated from 24:65:11:bb:e4:12 (Reason: 6) [ 4146.757425] cfg80211: Calling CRDA to update world regulatory domain [ 4146.757978] wlan0: authenticate with 24:65:11:bb:e4:12 [ 4146.954186] wlan0: send auth to 24:65:11:bb:e4:12 (try 1/3) [ 4146.954411] cfg80211: World regulatory domain updated: [ 4146.954414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4146.954417] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4146.954419] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4146.954420] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4146.954422] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4146.954423] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4146.968178] wlan0: authenticated [ 4146.969669] wlan0: associate with 24:65:11:bb:e4:12 (try 1/3) [ 4146.973412] wlan0: RX AssocResp from 24:65:11:bb:e4:12 (capab=0x431 status=0 aid=1) [ 4146.981401] wlan0: associated [ 4197.491129] wlan0: deauthenticated from 24:65:11:bb:e4:12 (Reason: 6) [ 4197.650822] cfg80211: Calling CRDA to update world regulatory domain [ 4197.651278] wlan0: authenticate with 24:65:11:bb:e4:12 [ 4197.846247] wlan0: send auth to 24:65:11:bb:e4:12 (try 1/3) [ 4197.846451] cfg80211: World regulatory domain updated: [ 4197.846456] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4197.846460] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4197.846463] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4197.846465] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4197.846468] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4197.846470] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4197.860802] wlan0: authenticated [ 4197.863548] wlan0: associate with 24:65:11:bb:e4:12 (try 1/3) [ 4197.868086] wlan0: RX AssocResp from 24:65:11:bb:e4:12 (capab=0x431 status=0 aid=1) [ 4197.875941] wlan0: associated [ 4917.425736] mintinstall[3041]: segfault at c530d35c ip aee70630 sp bfeaca30 error 5 in libapt-pkg.so.4.12.0[aee1d000+144000] [ 4929.731765] mintinstall[3078]: segfault at c530d35c ip aef00630 sp bfc7d300 error 5 in libapt-pkg.so.4.12.0[aeead000+144000] [ 4962.744621] mintinstall[3118]: segfault at c530d35c ip aee85630 sp bfcc2f60 error 5 in libapt-pkg.so.4.12.0[aee32000+144000] [ 4974.606068] mintinstall[3156]: segfault at c520d35c ip aee32630 sp bfd31e80 error 5 in libapt-pkg.so.4.12.0[aeddf000+144000] [ 4989.973585] mintinstall[3208]: segfault at c520d35c ip aee5e630 sp bf822860 error 5 in libapt-pkg.so.4.12.0[aee0b000+144000] [ 5260.613338] python[3310]: segfault at d1aa035c ip b6f8d630 sp bf894ad0 error 5 in libapt-pkg.so.4.12.0[b6f3a000+144000] [ 5842.726091] mintinstall[3440]: segfault at c530d35c ip aeeea630 sp bf972900 error 5 in libapt-pkg.so.4.12.0[aee97000+144000] BOSS ist eine Unterfirma/Branding von Roland und so heißt das Gerät ja scheinbar auch (Roland ME-25) Und wüsstest du was einfacheres als Rosegarden? Irgendwie komm ich nicht wirklich damit zurecht... Schonmal ein dickes Danke! |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Da fällt mir nix auf. Da kenn ich mich nicht aus, im Wiki gibt es aber eine Übersicht über ▶ Noten und Akkorde. PS: Es war auch so gedacht, dass du NEU ansteckst und dann die letzten Meldungen zum Mic ansiehst. 😉 Aber hab's dank deines Hinweises auch so gefunden. |
Anmeldungsdatum: Beiträge: 7 |
Mega ... danke ... wirklich du konntest mir echt helfen ... vielleicht ist halt dieses Rosegarden doch ein Tick (ja Untertreibung 😉 ) über meinem momentanen Verständnis. |
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Vielleicht hilft dir auch noch das:
Erkannt wurde es ja scheinbar. |
Anmeldungsdatum: Beiträge: 7 |
leider nein und ich hab im allgemeinen ein Problem die Aus und Eingänge ordentlich zu definieren (alsamixer passiert nix mit F4 und F6 und im Ardour 2 finde ich auch nirgends eine Einstellung in der ich den Eingang oder Ausgang bestimmen kann!) Ich bin momentan ein wenig überfragt und ratlos ... |
Anmeldungsdatum: Beiträge: 1215 |
Hi, hast du schon versucht, in qjackctl vor dem Starten von Jack in den Einstellungen (Einstellungen → Schnittstelle) ein anderes Gerät einzustellen? Da steht evtl. "hw:0", "hw:1" usw. Bei meinem USB-Interface läuft es unter Ubuntu z. B. so, dass ich immer nach "hw:1" wechseln muss, wenn ich es verwenden möchte. Mit "hw:0" startet jack mit dem Soundchip vom Laptop. |
Anmeldungsdatum: Beiträge: 7 |
ja steht schon auf ME-25 im ein und ausgang 😉 und momentan läuft mein gesamter systemsound über das Gerät (testweise ...) Diese Meldung bekomm ich immer aber am Anfang wenn ich ein neues Projekt öffne: [ERROR]: Es fehlen Daten zum AudioSetup-Wert von samplerate Und damit ein ? mehr 😉 |
Anmeldungsdatum: Beiträge: 1215 |
Äh, heißt das jetzt, dass das funktioniert? Also anstecken, Jack starten, Ein- u. Ausgänge definieren, Systemsound über das Gerät? Oder geht gar nix? Oder gehen manche Funktionen nicht - und wenn, was? |
Anmeldungsdatum: Beiträge: 7 |
Hmm, also Systemsounds und Sound vom ME über dort eingesteckte Kopfhörer/Verstärker ... ABER in den Programmen kommt einfach NIX... 😕 |
Anmeldungsdatum: Beiträge: 1215 |
Äh, also heißt das jetzt, dass wenn du das Gerät über Usb anschließt kannst du beim Audioout das Signal abgreifen, ohne von der Laptop-Buchse nach Gerät zu verkabeln. Richtig? Wenn, dann machst du schätzungsweise etwas bei der virtuellen Jack-Verkabelung falsch bzw. in Ardour. Du musst z. B. nicht nur das Audioin vom Gerät auf eine Spur verkabeln, sondern auch von der Spur auf die Master-Spur bzw. von der Spur direkt nach Systemout usw. Das kommt natürlich darauf an, wie man es konfiguriert und kann recht verwirrend sein. |
Anmeldungsdatum: Beiträge: 7 |
Jop. Ich steck das Brett ein und kann in der normalen Systemkonfig im Audiobereich einstellen, das alles über das ME-Läuft
Verwirrend ist sehr richtig. Leider finde ich auch wirklich garnichts zum Einstellen. Hab im Jack unter Einstellung alles auf hw:3 gesetzt (was laut Jack mein ME-25 ist) und siehe da ... nix ... 😬 |
Anmeldungsdatum: Beiträge: 1215 |
Kannst du das etwas präziser ausdrücken? Wo steht, dass das Gerät hw:3 ist? Welches Programm nutzt du zum Starten von Jack? Am besten Schritt für Schritt. Wenn du das Gerät nur per Usb anschließt und dann vom Audioout des Geräts ein Kabel zu deiner Abhöre und vom Laptop selber nicht zu deiner Abhöre, ist es, schätze ich, nur ein Konfigurationsproblem. Du machst irgendwas beim Starten von Jack falsch. Bei mir ist es auch schon vorgekommen, dass ich den Soundchip meines Laptops in /etc/modprobe.d/blacklist.conf blacklisten ☺ musste, aber das war nicht unter Ubuntu. Vielleicht magst du das einfach probieren, dann müsstest du herausfinden, was für ein Chip das ist und wie das Modul heißt, dass du blacklisten möchtest (lsmod sagt dir das). Wenn du dann ohne das Modul startest, sollte Alsa theoretisch beim Starten automatisch das Me25 als Ausgabegerät wählen, sofern es angesteckt ist, versteht sich. Dann kannst du uns vielleicht auch noch den Inhalt von /etc/group hier veröffentlichen und den Benutzernamen auf deinem Computer. Frohe Weihnachten. 😉 |