Hallo Lidux,
hier kommt die Ausgabe von dmesg
[ 21.281892] init: plymouth-upstart-bridge main process ended, respawning
[ 21.293174] init: plymouth-upstart-bridge main process (1254) terminated with status 1
[ 21.293205] init: plymouth-upstart-bridge main process ended, respawning
[ 46.378274] audit_printk_skb: 168 callbacks suppressed
[ 46.378281] type=1400 audit(1419258062.655:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2202 comm="apparmor_parser"
[ 46.378295] type=1400 audit(1419258062.655:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2202 comm="apparmor_parser"
[ 46.379359] type=1400 audit(1419258062.659:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2202 comm="apparmor_parser"
[ 456.770810] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[ 457.692906] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[ 458.717782] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[ 756.947192] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[ 1057.328548] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[ 1657.681401] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[ 1957.959936] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[ 2258.239002] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[ 3907.887796] cfg80211: Calling CRDA to update world regulatory domain
[ 3907.903405] cfg80211: World regulatory domain updated:
[ 3907.903414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3907.903420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3907.903425] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3907.903429] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3907.903434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3907.903438] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3908.815579] wlan0: authenticate with 34:31:c4:83:8d:4c
[ 3908.835975] wlan0: send auth to 34:31:c4:83:8d:4c (try 1/3)
[ 3908.844485] wlan0: authenticated
[ 3908.845668] wlan0: associate with 34:31:c4:83:8d:4c (try 1/3)
[ 3908.862889] wlan0: RX AssocResp from 34:31:c4:83:8d:4c (capab=0x431 status=0 aid=4)
[ 3908.862969] wlan0: associated
[ 3908.863222] cfg80211: Calling CRDA for country: DE
[ 3908.869404] ath: EEPROM regdomain: 0x8114
[ 3908.869413] ath: EEPROM indicates we should expect a country code
[ 3908.869417] ath: doing EEPROM country->regdmn map search
[ 3908.869421] ath: country maps to regdmn code: 0x37
[ 3908.869424] ath: Country alpha2 being used: DE
[ 3908.869428] ath: Regpair used: 0x37
[ 3908.869432] ath: regdomain 0x8114 dynamically updated by country IE
[ 3908.869455] cfg80211: Regulatory domain changed to country: DE
[ 3908.869459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3908.869464] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3908.869468] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3908.869473] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3908.869477] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 3908.869482] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 3993.910429] usb 1-2.1: USB disconnect, device number 4
[ 4186.510195] systemd-hostnamed[3613]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4895.800159] wlan0: deauthenticating from 34:31:c4:83:8d:4c by local choice (reason=3)
[ 4895.815735] cfg80211: Calling CRDA to update world regulatory domain
[ 4895.825203] cfg80211: World regulatory domain updated:
[ 4895.825212] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4895.825219] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4895.825224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4895.825229] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4895.825235] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4895.825240] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4897.693691] PM: Syncing filesystems ... done.
[ 4897.859073] PM: Preparing system for mem sleep
[ 4897.859280] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4897.861569] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4897.862876] PM: Entering mem sleep
[ 4897.863747] Suspending console(s) (use no_console_suspend to debug)
[ 4897.885885] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4897.909818] sd 0:0:0:0: [sda] Stopping disk
[ 4898.506508] PM: suspend of devices complete after 620.231 msecs
[ 4898.522500] PM: late suspend of devices complete after 15.974 msecs
[ 4898.523242] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 4898.554508] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4898.570330] PM: noirq suspend of devices complete after 47.787 msecs
[ 4898.570374] ACPI: Preparing to enter system sleep state S3
[ 4898.570797] PM: Saving platform NVS memory
[ 4898.586222] Disabling non-boot CPUs ...
[ 4898.587714] kvm: disabling virtualization on CPU1
[ 4898.690382] smpboot: CPU 1 is now offline
[ 4898.692225] kvm: disabling virtualization on CPU2
[ 4898.794471] smpboot: CPU 2 is now offline
[ 4898.795206] Broke affinity for irq 103
[ 4898.796234] kvm: disabling virtualization on CPU3
[ 4898.796247] smpboot: CPU 3 is now offline
[ 4898.797115] ACPI: Low-level resume complete
[ 4898.797184] PM: Restoring platform NVS memory
[ 4898.802753] CPU0: Thermal monitoring handled by SMI
[ 4898.802859] Enabling non-boot CPUs ...
[ 4898.802916] x86: Booting SMP configuration:
[ 4898.802918] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4898.818599] CPU1: Thermal monitoring handled by SMI
[ 4898.818624] kvm: enabling virtualization on CPU1
[ 4898.820983] ------------[ cut here ]------------
[ 4898.820990] WARNING: CPU: 0 PID: 3847 at /build/buildd/linux-3.13.0/fs/sysfs/dir.c:486 sysfs_warn_dup+0x86/0xa0()
[ 4898.820991] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu1/cpufreq'
[ 4898.821037] Modules linked in: ctr ccm bnep rfcomm dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev acer_wmi sparse_keymap snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep btusb bluetooth intel_rapl coretemp kvm_intel snd_pcm kvm snd_page_alloc arc4 crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel cryptd snd_seq_midi_event snd_rawmidi ath9k ath9k_common ath9k_hw ath joydev snd_seq mac80211 snd_seq_device snd_timer serio_raw cfg80211 snd soundcore dw_dmac parport_pc dw_dmac_core ppdev i2c_designware_platform i2c_designware_core mac_hid lp parport i915 psmouse r8169 mii i2c_algo_bit drm_kms_helper sdhci_pci sdhci drm ahci libahci wmi video
[ 4898.821040] CPU: 0 PID: 3847 Comm: pm-suspend Not tainted 3.13.0-43-generic #72-Ubuntu
[ 4898.821041] Hardware name: Acer Aspire E3-112/R2, BIOS V1.03 07/22/2014
[ 4898.821046] 0000000000000009 ffff88003b0fbb90 ffffffff81720bf6 ffff88003b0fbbd8
[ 4898.821049] ffff88003b0fbbc8 ffffffff810677cd ffff8801761f2000 ffff8801761f2000
[ 4898.821052] ffff8801795b9540 0000000000000000 0000000000000001 ffff88003b0fbc28
[ 4898.821053] Call Trace:
[ 4898.821059] [<ffffffff81720bf6>] dump_stack+0x45/0x56
[ 4898.821063] [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[ 4898.821066] [<ffffffff8106783c>] warn_slowpath_fmt+0x4c/0x50
[ 4898.821069] [<ffffffff81235506>] sysfs_warn_dup+0x86/0xa0
[ 4898.821072] [<ffffffff81235560>] sysfs_add_one+0x40/0x50
[ 4898.821075] [<ffffffff812360cf>] sysfs_do_create_link_sd.isra.2+0xbf/0x210
[ 4898.821077] [<ffffffff81236245>] sysfs_create_link+0x25/0x50
[ 4898.821082] [<ffffffff815c9d53>] __cpufreq_add_dev.isra.20+0x1b3/0x920
[ 4898.821085] [<ffffffff815ca532>] cpufreq_cpu_callback+0x72/0xc0
[ 4898.821089] [<ffffffff8172d1ac>] notifier_call_chain+0x4c/0x70
[ 4898.821093] [<ffffffff8108fd4e>] __raw_notifier_call_chain+0xe/0x10
[ 4898.821095] [<ffffffff810679d3>] cpu_notify+0x23/0x50
[ 4898.821098] [<ffffffff81067c18>] _cpu_up+0x168/0x180
[ 4898.821101] [<ffffffff817103e0>] enable_nonboot_cpus+0x90/0xe0
[ 4898.821105] [<ffffffff810b4465>] suspend_devices_and_enter+0x315/0x440
[ 4898.821108] [<ffffffff810b4708>] pm_suspend+0x178/0x260
[ 4898.821112] [<ffffffff810b3529>] state_store+0x79/0xf0
[ 4898.821116] [<ffffffff8136648f>] kobj_attr_store+0xf/0x20
[ 4898.821118] [<ffffffff81233fe8>] sysfs_write_file+0x128/0x1c0
[ 4898.821122] [<ffffffff811bdc44>] vfs_write+0xb4/0x1f0
[ 4898.821125] [<ffffffff811be679>] SyS_write+0x49/0xa0
[ 4898.821129] [<ffffffff817316ad>] system_call_fastpath+0x1a/0x1f
[ 4898.821130] ---[ end trace 3c5f6b3d70c80976 ]---
[ 4898.821142] CPU1 is up
[ 4898.821168] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 4898.836903] CPU2: Thermal monitoring handled by SMI
[ 4898.836932] kvm: enabling virtualization on CPU2
[ 4898.839215] ------------[ cut here ]------------
[ 4898.839219] WARNING: CPU: 0 PID: 3847 at /build/buildd/linux-3.13.0/fs/sysfs/dir.c:486 sysfs_warn_dup+0x86/0xa0()
[ 4898.839220] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu2/cpufreq'
[ 4898.839257] Modules linked in: ctr ccm bnep rfcomm dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev acer_wmi sparse_keymap snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep btusb bluetooth intel_rapl coretemp kvm_intel snd_pcm kvm snd_page_alloc arc4 crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel cryptd snd_seq_midi_event snd_rawmidi ath9k ath9k_common ath9k_hw ath joydev snd_seq mac80211 snd_seq_device snd_timer serio_raw cfg80211 snd soundcore dw_dmac parport_pc dw_dmac_core ppdev i2c_designware_platform i2c_designware_core mac_hid lp parport i915 psmouse r8169 mii i2c_algo_bit drm_kms_helper sdhci_pci sdhci drm ahci libahci wmi video
[ 4898.839260] CPU: 0 PID: 3847 Comm: pm-suspend Tainted: G W 3.13.0-43-generic #72-Ubuntu
[ 4898.839261] Hardware name: Acer Aspire E3-112/R2, BIOS V1.03 07/22/2014
[ 4898.839265] 0000000000000009 ffff88003b0fbb90 ffffffff81720bf6 ffff88003b0fbbd8
[ 4898.839268] ffff88003b0fbbc8 ffffffff810677cd ffff8801761f2000 ffff8801761f2000
[ 4898.839271] ffff8801795b9d90 0000000000000000 0000000000000001 ffff88003b0fbc28
[ 4898.839272] Call Trace:
[ 4898.839276] [<ffffffff81720bf6>] dump_stack+0x45/0x56
[ 4898.839278] [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[ 4898.839281] [<ffffffff8106783c>] warn_slowpath_fmt+0x4c/0x50
[ 4898.839284] [<ffffffff81235506>] sysfs_warn_dup+0x86/0xa0
[ 4898.839286] [<ffffffff81235560>] sysfs_add_one+0x40/0x50
[ 4898.839289] [<ffffffff812360cf>] sysfs_do_create_link_sd.isra.2+0xbf/0x210
[ 4898.839292] [<ffffffff81236245>] sysfs_create_link+0x25/0x50
[ 4898.839295] [<ffffffff815c9d53>] __cpufreq_add_dev.isra.20+0x1b3/0x920
[ 4898.839298] [<ffffffff815ca532>] cpufreq_cpu_callback+0x72/0xc0
[ 4898.839301] [<ffffffff8172d1ac>] notifier_call_chain+0x4c/0x70
[ 4898.839304] [<ffffffff8108fd4e>] __raw_notifier_call_chain+0xe/0x10
[ 4898.839307] [<ffffffff810679d3>] cpu_notify+0x23/0x50
[ 4898.839309] [<ffffffff81067c18>] _cpu_up+0x168/0x180
[ 4898.839312] [<ffffffff817103e0>] enable_nonboot_cpus+0x90/0xe0
[ 4898.839316] [<ffffffff810b4465>] suspend_devices_and_enter+0x315/0x440
[ 4898.839318] [<ffffffff810b4708>] pm_suspend+0x178/0x260
[ 4898.839321] [<ffffffff810b3529>] state_store+0x79/0xf0
[ 4898.839324] [<ffffffff8136648f>] kobj_attr_store+0xf/0x20
[ 4898.839327] [<ffffffff81233fe8>] sysfs_write_file+0x128/0x1c0
[ 4898.839330] [<ffffffff811bdc44>] vfs_write+0xb4/0x1f0
[ 4898.839333] [<ffffffff811be679>] SyS_write+0x49/0xa0
[ 4898.839335] [<ffffffff817316ad>] system_call_fastpath+0x1a/0x1f
[ 4898.839337] ---[ end trace 3c5f6b3d70c80977 ]---
[ 4898.839345] CPU2 is up
[ 4898.839368] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 4898.855102] CPU3: Thermal monitoring handled by SMI
[ 4898.855132] kvm: enabling virtualization on CPU3
[ 4898.857453] ------------[ cut here ]------------
[ 4898.857457] WARNING: CPU: 0 PID: 3847 at /build/buildd/linux-3.13.0/fs/sysfs/dir.c:486 sysfs_warn_dup+0x86/0xa0()
[ 4898.857458] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu3/cpufreq'
[ 4898.857494] Modules linked in: ctr ccm bnep rfcomm dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev acer_wmi sparse_keymap snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep btusb bluetooth intel_rapl coretemp kvm_intel snd_pcm kvm snd_page_alloc arc4 crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel cryptd snd_seq_midi_event snd_rawmidi ath9k ath9k_common ath9k_hw ath joydev snd_seq mac80211 snd_seq_device snd_timer serio_raw cfg80211 snd soundcore dw_dmac parport_pc dw_dmac_core ppdev i2c_designware_platform i2c_designware_core mac_hid lp parport i915 psmouse r8169 mii i2c_algo_bit drm_kms_helper sdhci_pci sdhci drm ahci libahci wmi video
[ 4898.857497] CPU: 0 PID: 3847 Comm: pm-suspend Tainted: G W 3.13.0-43-generic #72-Ubuntu
[ 4898.857498] Hardware name: Acer Aspire E3-112/R2, BIOS V1.03 07/22/2014
[ 4898.857502] 0000000000000009 ffff88003b0fbb90 ffffffff81720bf6 ffff88003b0fbbd8
[ 4898.857505] ffff88003b0fbbc8 ffffffff810677cd ffff8801761f2000 ffff8801761f2000
[ 4898.857508] ffff8801795ba620 0000000000000000 0000000000000001 ffff88003b0fbc28
[ 4898.857508] Call Trace:
[ 4898.857512] [<ffffffff81720bf6>] dump_stack+0x45/0x56
[ 4898.857515] [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[ 4898.857518] [<ffffffff8106783c>] warn_slowpath_fmt+0x4c/0x50
[ 4898.857521] [<ffffffff81235506>] sysfs_warn_dup+0x86/0xa0
[ 4898.857523] [<ffffffff81235560>] sysfs_add_one+0x40/0x50
[ 4898.857526] [<ffffffff812360cf>] sysfs_do_create_link_sd.isra.2+0xbf/0x210
[ 4898.857529] [<ffffffff81236245>] sysfs_create_link+0x25/0x50
[ 4898.857532] [<ffffffff815c9d53>] __cpufreq_add_dev.isra.20+0x1b3/0x920
[ 4898.857535] [<ffffffff815ca532>] cpufreq_cpu_callback+0x72/0xc0
[ 4898.857538] [<ffffffff8172d1ac>] notifier_call_chain+0x4c/0x70
[ 4898.857541] [<ffffffff8108fd4e>] __raw_notifier_call_chain+0xe/0x10
[ 4898.857544] [<ffffffff810679d3>] cpu_notify+0x23/0x50
[ 4898.857546] [<ffffffff81067c18>] _cpu_up+0x168/0x180
[ 4898.857549] [<ffffffff817103e0>] enable_nonboot_cpus+0x90/0xe0
[ 4898.857552] [<ffffffff810b4465>] suspend_devices_and_enter+0x315/0x440
[ 4898.857555] [<ffffffff810b4708>] pm_suspend+0x178/0x260
[ 4898.857558] [<ffffffff810b3529>] state_store+0x79/0xf0
[ 4898.857561] [<ffffffff8136648f>] kobj_attr_store+0xf/0x20
[ 4898.857564] [<ffffffff81233fe8>] sysfs_write_file+0x128/0x1c0
[ 4898.857567] [<ffffffff811bdc44>] vfs_write+0xb4/0x1f0
[ 4898.857570] [<ffffffff811be679>] SyS_write+0x49/0xa0
[ 4898.857572] [<ffffffff817316ad>] system_call_fastpath+0x1a/0x1f
[ 4898.857574] ---[ end trace 3c5f6b3d70c80978 ]---
[ 4898.857582] CPU3 is up
[ 4898.861491] ACPI: Waking up from system sleep state S3
[ 4898.876720] acpi LNXPOWER:00: Turning OFF
[ 4898.908540] sdhci-pci 0000:00:12.0: Refused to change power state, currently in D3
[ 4898.996670] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4899.012623] sdhci-pci 0000:00:17.0: Refused to change power state, currently in D3
[ 4899.116922] PM: noirq resume of devices complete after 239.994 msecs
[ 4899.132873] PM: early resume of devices complete after 15.896 msecs
[ 4899.137083] snd_hda_intel 0000:00:1b.0: irq 107 for MSI/MSI-X
[ 4899.137191] ath: phy0: ASPM enabled: 0x42
[ 4899.137207] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 4899.140882] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[ 4899.140885] PM: Device 00:04 failed to resume: error -19
[ 4899.148751] sdhci-pci 0000:00:12.0: Refused to change power state, currently in D3
[ 4899.152751] sdhci-pci 0000:00:17.0: Refused to change power state, currently in D3
[ 4899.164760] sdhci-pci 0000:00:12.0: Refused to change power state, currently in D3
[ 4899.169380] sdhci-pci 0000:00:17.0: Refused to change power state, currently in D3
[ 4899.264261] mmc0: Reset 0x1 never completed.
[ 4899.268894] mmc1: Reset 0x1 never completed.
[ 4899.414079] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[ 4899.430168] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801783be040
[ 4899.542036] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 4899.563849] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017716c0c0
[ 4900.626400] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
[ 4900.994665] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4901.111228] ata1.00: configured for UDMA/133
[ 4901.126554] sd 0:0:0:0: [sda] Starting disk
[ 4902.141937] PM: resume of devices complete after 3006.611 msecs
[ 4902.142408] PM: Finishing wakeup.
[ 4902.142411] Restarting tasks ... done.
[ 4902.147351] video LNXVIDEO:00: Restoring backlight state
[ 4902.153311] mmc0: 3.3V regulator output did not became stable
[ 4902.167220] mmc0: Invalid UHS-I mode selected
[ 4902.167235] mmc0: Invalid UHS-I mode selected
[ 4902.167244] mmc0: Invalid UHS-I mode selected
[ 4902.193168] mmc0: Controller never released inhibit bit(s).
[ 4902.292549] mmc0: Reset 0x2 never completed.
[ 4902.391892] mmc0: Reset 0x4 never completed.
[ 4902.402000] mmc0: Controller never released inhibit bit(s).
[ 4902.501375] mmc0: Reset 0x2 never completed.
[ 4902.600716] mmc0: Reset 0x4 never completed.
[ 4902.600937] mmc0: Invalid UHS-I mode selected
[ 4902.600950] mmc0: Invalid UHS-I mode selected
[ 4902.611886] mmc0: Controller never released inhibit bit(s).
[ 4902.711253] mmc0: Reset 0x2 never completed.
[ 4902.810596] mmc0: Reset 0x4 never completed.
[ 4902.811657] mmc0: Invalid UHS-I mode selected
[ 4902.811668] mmc0: Invalid UHS-I mode selected
[ 4902.822604] mmc0: Controller never released inhibit bit(s).
[ 4902.921960] mmc0: Reset 0x2 never completed.
[ 4903.021304] mmc0: Reset 0x4 never completed.
[ 4903.031272] mmc0: Controller never released inhibit bit(s).
[ 4903.130633] mmc0: Reset 0x2 never completed.
[ 4903.229974] mmc0: Reset 0x4 never completed.
[ 4903.239932] mmc0: Controller never released inhibit bit(s).
[ 4903.339285] mmc0: Reset 0x2 never completed.
[ 4903.438628] mmc0: Reset 0x4 never completed.
[ 4903.448907] mmc0: Controller never released inhibit bit(s).
[ 4903.548275] mmc0: Reset 0x2 never completed.
[ 4903.647616] mmc0: Reset 0x4 never completed.
[ 4903.657742] mmc0: Controller never released inhibit bit(s).
[ 4903.757126] mmc0: Reset 0x2 never completed.
[ 4903.776810] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4903.818606] r8169 0000:03:00.0 eth0: link down
[ 4903.818672] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4903.856471] mmc0: Reset 0x4 never completed.
[ 4903.866543] mmc0: Controller never released inhibit bit(s).
[ 4903.965901] mmc0: Reset 0x2 never completed.
[ 4904.065240] mmc0: Reset 0x4 never completed.
[ 4904.075214] mmc0: Controller never released inhibit bit(s).
[ 4904.174569] mmc0: Reset 0x2 never completed.
[ 4904.273908] mmc0: Reset 0x4 never completed.
[ 4904.283860] mmc0: Controller never released inhibit bit(s).
[ 4904.383210] mmc0: Reset 0x2 never completed.
[ 4904.482549] mmc0: Reset 0x4 never completed.
[ 4904.492531] mmc0: Controller never released inhibit bit(s).
[ 4904.591886] mmc0: Reset 0x2 never completed.
[ 4904.691225] mmc0: Reset 0x4 never completed.
[ 4904.691274] mmc0: Invalid UHS-I mode selected
[ 4904.691282] mmc0: Invalid UHS-I mode selected
[ 4904.701222] mmc0: Controller never released inhibit bit(s).
[ 4904.800573] mmc0: Reset 0x2 never completed.
[ 4904.899912] mmc0: Reset 0x4 never completed.
[ 4904.999279] mmc0: Reset 0x1 never completed.
[ 4905.006030] mmc0: 3.3V regulator output did not became stable
[ 4905.021942] mmc0: Invalid UHS-I mode selected
[ 4905.021969] mmc0: Invalid UHS-I mode selected
[ 4905.021984] mmc0: Invalid UHS-I mode selected
[ 4905.047554] mmc0: Controller never released inhibit bit(s).
[ 4905.146987] mmc0: Reset 0x2 never completed.
[ 4905.246363] mmc0: Reset 0x4 never completed.
[ 4905.256429] mmc0: Controller never released inhibit bit(s).
[ 4905.355782] mmc0: Reset 0x2 never completed.
[ 4905.455122] mmc0: Reset 0x4 never completed.
[ 4905.455160] mmc0: Invalid UHS-I mode selected
[ 4905.455167] mmc0: Invalid UHS-I mode selected
[ 4905.466105] mmc0: Controller never released inhibit bit(s).
[ 4905.565461] mmc0: Reset 0x2 never completed.
[ 4905.664802] mmc0: Reset 0x4 never completed.
[ 4905.665871] mmc0: Invalid UHS-I mode selected
[ 4905.665878] mmc0: Invalid UHS-I mode selected
[ 4905.676818] mmc0: Controller never released inhibit bit(s).
[ 4905.776169] mmc0: Reset 0x2 never completed.
[ 4905.875507] mmc0: Reset 0x4 never completed.
[ 4905.885533] mmc0: Controller never released inhibit bit(s).
[ 4905.984886] mmc0: Reset 0x2 never completed.
[ 4906.084225] mmc0: Reset 0x4 never completed.
[ 4906.094197] mmc0: Controller never released inhibit bit(s).
[ 4906.193592] mmc0: Reset 0x2 never completed.
[ 4906.292934] mmc0: Reset 0x4 never completed.
[ 4906.303016] mmc0: Controller never released inhibit bit(s).
[ 4906.402379] mmc0: Reset 0x2 never completed.
[ 4906.485598] wlan0: authenticate with 34:31:c4:83:8d:4c
[ 4906.501192] wlan0: send auth to 34:31:c4:83:8d:4c (try 1/3)
[ 4906.501721] mmc0: Reset 0x4 never completed.
[ 4906.505616] wlan0: authenticated
[ 4906.506742] wlan0: associate with 34:31:c4:83:8d:4c (try 1/3)
[ 4906.511717] mmc0: Controller never released inhibit bit(s).
[ 4906.533626] wlan0: RX AssocResp from 34:31:c4:83:8d:4c (capab=0x431 status=0 aid=5)
[ 4906.533688] wlan0: associated
[ 4906.533738] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4906.533849] cfg80211: Calling CRDA for country: DE
[ 4906.539140] ath: EEPROM regdomain: 0x8114
[ 4906.539146] ath: EEPROM indicates we should expect a country code
[ 4906.539149] ath: doing EEPROM country->regdmn map search
[ 4906.539151] ath: country maps to regdmn code: 0x37
[ 4906.539153] ath: Country alpha2 being used: DE
[ 4906.539155] ath: Regpair used: 0x37
[ 4906.539166] ath: regdomain 0x8114 dynamically updated by country IE
[ 4906.539186] cfg80211: Regulatory domain changed to country: DE
[ 4906.539188] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4906.539191] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4906.539194] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4906.539196] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4906.539199] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 4906.539201] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 4906.611091] mmc0: Reset 0x2 never completed.
[ 4906.710433] mmc0: Reset 0x4 never completed.
[ 4906.720423] mmc0: Controller never released inhibit bit(s).
[ 4906.819783] mmc0: Reset 0x2 never completed.
[ 4906.919124] mmc0: Reset 0x4 never completed.
[ 4906.929114] mmc0: Controller never released inhibit bit(s).
[ 4907.028472] mmc0: Reset 0x2 never completed.
[ 4907.127814] mmc0: Reset 0x4 never completed.
[ 4907.128225] wlan0: deauthenticating from 34:31:c4:83:8d:4c by local choice (reason=2)
[ 4907.137788] mmc0: Controller never released inhibit bit(s).
[ 4907.237148] mmc0: Reset 0x2 never completed.
[ 4907.336489] mmc0: Reset 0x4 never completed.
[ 4907.346464] mmc0: Controller never released inhibit bit(s).
[ 4907.445826] mmc0: Reset 0x2 never completed.
[ 4907.545167] mmc0: Reset 0x4 never completed.
[ 4907.545396] mmc0: Invalid UHS-I mode selected
[ 4907.545407] mmc0: Invalid UHS-I mode selected
[ 4907.555348] mmc0: Controller never released inhibit bit(s).
[ 4907.654710] mmc0: Reset 0x2 never completed.
[ 4907.754051] mmc0: Reset 0x4 never completed.
[ 4907.853504] mmc0: Reset 0x1 never completed.
[ 4907.860241] mmc0: 3.3V regulator output did not became stable
[ 4907.862927] cfg80211: Calling CRDA to update world regulatory domain
[ 4907.867008] wlan0: authenticate with 34:31:c4:83:8d:4c
[ 4907.875914] mmc0: Invalid UHS-I mode selected
[ 4907.875929] mmc0: Invalid UHS-I mode selected
[ 4907.875940] mmc0: Invalid UHS-I mode selected
[ 4907.881973] wlan0: send auth to 34:31:c4:83:8d:4c (try 1/3)
[ 4907.882401] cfg80211: World regulatory domain updated:
[ 4907.882409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4907.882414] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4907.882418] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4907.882422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4907.882426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4907.882431] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4907.886451] wlan0: authenticated
[ 4907.887862] wlan0: associate with 34:31:c4:83:8d:4c (try 1/3)
[ 4907.901795] mmc0: Controller never released inhibit bit(s).
[ 4907.907334] wlan0: RX AssocResp from 34:31:c4:83:8d:4c (capab=0x431 status=0 aid=5)
[ 4907.907398] wlan0: associated
[ 4907.907475] cfg80211: Calling CRDA for country: DE
[ 4907.915632] ath: EEPROM regdomain: 0x8114
[ 4907.915637] ath: EEPROM indicates we should expect a country code
[ 4907.915640] ath: doing EEPROM country->regdmn map search
[ 4907.915642] ath: country maps to regdmn code: 0x37
[ 4907.915645] ath: Country alpha2 being used: DE
[ 4907.915647] ath: Regpair used: 0x37
[ 4907.915649] ath: regdomain 0x8114 dynamically updated by country IE
[ 4907.915668] cfg80211: Regulatory domain changed to country: DE
[ 4907.915671] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4907.915673] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4907.915676] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4907.915679] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4907.915681] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 4907.915684] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 4908.001168] mmc0: Reset 0x2 never completed.
[ 4908.100507] mmc0: Reset 0x4 never completed.
[ 4908.110508] mmc0: Controller never released inhibit bit(s).
[ 4908.209877] mmc0: Reset 0x2 never completed.
[ 4908.309219] mmc0: Reset 0x4 never completed.
[ 4908.309266] mmc0: Invalid UHS-I mode selected
[ 4908.309276] mmc0: Invalid UHS-I mode selected
[ 4908.320212] mmc0: Controller never released inhibit bit(s).
[ 4908.419575] mmc0: Reset 0x2 never completed.
[ 4908.518917] mmc0: Reset 0x4 never completed.
[ 4908.520008] mmc0: Invalid UHS-I mode selected
[ 4908.520020] mmc0: Invalid UHS-I mode selected
[ 4908.530965] mmc0: Controller never released inhibit bit(s).
[ 4908.630326] mmc0: Reset 0x2 never completed.
[ 4908.729668] mmc0: Reset 0x4 never completed.
[ 4908.739666] mmc0: Controller never released inhibit bit(s).
[ 4908.839023] mmc0: Reset 0x2 never completed.
[ 4908.938365] mmc0: Reset 0x4 never completed.
[ 4908.948340] mmc0: Controller never released inhibit bit(s).
[ 4909.047699] mmc0: Reset 0x2 never completed.
[ 4909.147041] mmc0: Reset 0x4 never completed.
[ 4909.157015] mmc0: Controller never released inhibit bit(s).
[ 4909.256371] mmc0: Reset 0x2 never completed.
[ 4909.355713] mmc0: Reset 0x4 never completed.
[ 4909.365826] mmc0: Controller never released inhibit bit(s).
[ 4909.465226] mmc0: Reset 0x2 never completed.
[ 4909.564576] mmc0: Reset 0x4 never completed.
[ 4909.574756] mmc0: Controller never released inhibit bit(s).
[ 4909.674120] mmc0: Reset 0x2 never completed.
[ 4909.773461] mmc0: Reset 0x4 never completed.
[ 4909.783504] mmc0: Controller never released inhibit bit(s).
[ 4909.882885] mmc0: Reset 0x2 never completed.
[ 4909.982233] mmc0: Reset 0x4 never completed.
[ 4909.992216] mmc0: Controller never released inhibit bit(s).
[ 4910.091592] mmc0: Reset 0x2 never completed.
[ 4910.190935] mmc0: Reset 0x4 never completed.
[ 4910.201032] mmc0: Controller never released inhibit bit(s).
[ 4910.300399] mmc0: Reset 0x2 never completed.
[ 4910.399741] mmc0: Reset 0x4 never completed.
[ 4910.399801] mmc0: Invalid UHS-I mode selected
[ 4910.399811] mmc0: Invalid UHS-I mode selected
[ 4910.409754] mmc0: Controller never released inhibit bit(s).
[ 4910.509116] mmc0: Reset 0x2 never completed.
[ 4910.608458] mmc0: Reset 0x4 never completed.
[ 4910.708186] mmc0: Reset 0x1 never completed.
[ 4910.714922] mmc0: 3.3V regulator output did not became stable
[ 4910.730194] mmc0: Invalid UHS-I mode selected
[ 4910.730213] mmc0: Invalid UHS-I mode selected
[ 4910.730231] mmc0: Invalid UHS-I mode selected
[ 4910.756153] mmc0: Controller never released inhibit bit(s).
[ 4910.855658] mmc0: Reset 0x2 never completed.
[ 4910.955037] mmc0: Reset 0x4 never completed.
[ 4910.965494] mmc0: Controller never released inhibit bit(s).
[ 4911.064855] mmc0: Reset 0x2 never completed.
[ 4911.164195] mmc0: Reset 0x4 never completed.
[ 4911.164279] mmc0: Invalid UHS-I mode selected
[ 4911.164290] mmc0: Invalid UHS-I mode selected
[ 4911.175224] mmc0: Controller never released inhibit bit(s).
[ 4911.274581] mmc0: Reset 0x2 never completed.
[ 4911.373922] mmc0: Reset 0x4 never completed.
[ 4911.374962] mmc0: Invalid UHS-I mode selected
[ 4911.374971] mmc0: Invalid UHS-I mode selected
[ 4911.385905] mmc0: Controller never released inhibit bit(s).
[ 4911.485259] mmc0: Reset 0x2 never completed.
[ 4911.584600] mmc0: Reset 0x4 never completed.
[ 4911.594604] mmc0: Controller never released inhibit bit(s).
[ 4911.693959] mmc0: Reset 0x2 never completed.
[ 4911.793299] mmc0: Reset 0x4 never completed.
[ 4911.803296] mmc0: Controller never released inhibit bit(s).
[ 4911.902650] mmc0: Reset 0x2 never completed.
[ 4912.001990] mmc0: Reset 0x4 never completed.
[ 4912.011966] mmc0: Controller never released inhibit bit(s).
[ 4912.111319] mmc0: Reset 0x2 never completed.
[ 4912.210658] mmc0: Reset 0x4 never completed.
[ 4912.220665] mmc0: Controller never released inhibit bit(s).
[ 4912.320019] mmc0: Reset 0x2 never completed.
[ 4912.419358] mmc0: Reset 0x4 never completed.
[ 4912.429495] mmc0: Controller never released inhibit bit(s).
[ 4912.528849] mmc0: Reset 0x2 never completed.
[ 4912.628189] mmc0: Reset 0x4 never completed.
[ 4912.638177] mmc0: Controller never released inhibit bit(s).
[ 4912.737533] mmc0: Reset 0x2 never completed.
[ 4912.836873] mmc0: Reset 0x4 never completed.
[ 4912.846841] mmc0: Controller never released inhibit bit(s).
[ 4912.946199] mmc0: Reset 0x2 never completed.
[ 4913.045539] mmc0: Reset 0x4 never completed.
[ 4913.055542] mmc0: Controller never released inhibit bit(s).
[ 4913.154898] mmc0: Reset 0x2 never completed.
[ 4913.254236] mmc0: Reset 0x4 never completed.
[ 4913.254346] mmc0: Invalid UHS-I mode selected
[ 4913.254357] mmc0: Invalid UHS-I mode selected
[ 4913.264300] mmc0: Controller never released inhibit bit(s).
[ 4913.363658] mmc0: Reset 0x2 never completed.
[ 4913.462998] mmc0: Reset 0x4 never completed.
[ 4913.562475] mmc0: Reset 0x1 never completed.
[ 5196.182731] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz)
[ 5227.772333] systemd-hostnamed[4396]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 5496.461221] wlan0: AP 34:31:c4:83:8d:4c changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz)
[ 5609.862930] usb 1-2.1: new full-speed USB device number 5 using xhci_hcd
[ 5609.880216] usb 1-2.1: New USB device found, idVendor=04ca, idProduct=300b
[ 5609.880225] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
andre@andre-Aspire-E3-112:~$
hier kommt lspci
andre@andre-Aspire-E3-112:~$ lspci
00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0e)
00:12.0 SD Host controller: Intel Corporation ValleyView SDIO Controller (rev ff)
00:13.0 SATA controller: Intel Corporation ValleyView 6-Port SATA AHCI Controller (rev 0e)
00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host Controller (rev 0e)
00:17.0 SD Host controller: Intel Corporation ValleyView MIPI-HSI Controller (rev ff)
00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0e)
00:1b.0 Audio device: Intel Corporation ValleyView High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1c.1 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1c.2 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e)
00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation ValleyView SMBus Controller (rev 0e)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
und lsusb
andre@andre-Aspire-E3-112:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 04ca:300b Lite-On Technology Corp.
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub