Hallo Leute,
Ich komme hier nicht weiter:
Ich habe das Kubuntu 14.04 von ner DVD neu insatlliert, und nun geht das Netz nichtmehr. Die DVD Version hat das Kubuntu paralell zum alten 12.04 installiert. fahre ich 12.04 hoch geht das Netz.
W-LAN funktioniert auch nicht, ist aber ein DELL-bug. Auch das separat. Hier geht's mir "nur" um das normale LAN / Internetzugang.
Auch fährt der Komputer nichtmehr runter (bleibt beim schwarzen Bildschirm nit "Kubuntu" hängen), aber dies nur der Vollständigkeit halber. Das Runterfahren werden ich separat behandeln.
Aber der Reihe nach:
Netzwerk: LAN mit Telekom Router: Speedport 724V WLAN funktioniert (aber nicht bei meinen 2 Dell Laptops, soll hier nicht behandelt werden) LAN mit kabel, VDSL bei der Telekom
Rechner: Dell Inspiron 6400 INTEGRATED INTEL MEDIA ACCELERATOR 950 DELL WIRELESS 1390 802.11B/G 54MBPS MINI
uname -a Linux NAme-MM061 3.13.0-32-generic '57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux Usage: lspci [<switches>] Basic display modes: -mm Produce machine-readable output (single -m for an obsolete format) -t Show bus tree Display options: -v Be verbose (-vv for very verbose) -k Show kernel drivers handling each device -x Show hex-dump of the standard part of the config space -xxx Show hex-dump of the whole config space (dangerous; root only) -xxxx Show hex-dump of the 4096-byte extended config space (root only) -b Bus-centric view (addresses and IRQ's as seen by the bus) -D Always show domain numbers Resolving of device ID's to names: -n Show numeric ID's -nn Show both textual and numeric ID's (names & numbers) -q Query the PCI ID database for unknown ID's via DNS -qq As above, but re-query locally cached entries -Q Query the PCI ID database for all ID's via DNS Selection of devices: -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots -d [<vendor>]:[<device>] Show only devices with specified ID's Other options: -i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz -p <file> Look up kernel modules in a given file instead of default modules.pcimap -M Enable `bus mapping' mode (dangerous; root only) PCI access options: -A <method> Use the specified PCI access method (see `-A help' for a list) -O <par>=<val> Set PCI access parameter (see `-O help' for a list) -G Enable PCI access debugging -H <mode> Use direct hardware access (<mode> = 1 or 2) -F <file> Read PCI configuration dump from a given file ------------------------------------- gosq@gosq-MM061:~$ cat /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback --------------------------------- gosq@gosq-MM061:~$ cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN ---------------------------------- cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 gosq-MM061 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ------------------------------------ gosq@gosq-MM061:~$ ifconfig -a lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:167 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:167 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:12083 (12.0 KB) TX-Bytes:12083 (12.0 KB) --------------------------------------- gosq@gosq-MM061:~$ iwconfig lo no wireless extensions. ------------------------------------ gosq@gosq-MM061:~$ route -n Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface ------------------------------------- gosq@gosq-MM061:~$ arp -aw arp: Ungültige Option -- w Benutzung: arp [-vn] [<HW>] [-i <if>] [-a] [<Hostname>] arp [-v] [-i <if>] -d <Host> [pub] <-ARP-Eintrag entfernen arp [-vnD] [<HW>] [-i <if>] -f [<dateiname>] <-Eintrag aus Datei hinzufügen arp [-v] [<HW>] [-i <if>] -s <Host> <Hwaddr> [Temp] <-Eintrag hinzufügen arp [-v] [<HW>] [-i <if>] -Ds <Host> <if> [netmask <nm>] pub <-''- -a Alle Hosts im BSD-Format anzeigen -s, --set Neuen ARP-Eintrag setzen -d, --delete Einen bestimmten Eintrag löschen -v, --verbose Ausführliche Ausgaben -n, --numeric Rechnernamen nicht auflösen -i, --device Netzwerkgerät (z.B. eth0) angeben -D, --use-device <hwaddr> von gegebenem Gerät lesen -A, -p, --protocol Routentabelle anzeigen -f, --file Neue Einträge aus Datei lesen <HW>='-H <hw>' um Hardwareadresstyp anzugeben. Standard: ether Liste möglicher Hardwaretypen, die ARP unterstützen: ash (Ash) ether (Ethernet) ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE) arcnet (ARCnet) dlci (Frame Relay DLCI) fddi (Fiber Distributed Data Interface) hippi (HIPPI) irda (IrLAP) x25 (Generisches X.25) eui64 (Generisches EUI-64) ----------------------------------------- gosq@gosq-MM061:~$ ip neigh show gosq@gosq-MM061:~$ ----------------------------------------- gosq@gosq-MM061:~$ cat /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true -------------------------------------- gosq@gosq-MM061:~$ cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq [ifupdown] managed=false --------------------------------------- gosq@gosq-MM061:~$ cat /etc/udev/rules.d/70-persistent-net.rules | egrep -i 'device|sub' -A3 # PCI device 0x14e4:0x170c (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:19:b9:74:50:89", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" ----------------------------------------- gosq@gosq-MM061:~$ ping -c 2 $(route -n | grep UG | awk {'print $2'}) Usage: ping [-aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I interface] [-m mark] [-M pmtudisc_option] [-l preload] [-p pattern] [-Q tos] [-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp_option] [-w deadline] [-W timeout] [hop1 ...] destination ---------------------------------- gosq@gosq-MM061:~$ ping -c 2 www.ubuntuusers.de ping: unknown host www.ubuntuusers.de gosq@gosq-MM061:~$ ping -c 2 213.95.41.4 connect: Network is unreachable
Ich will erstmal nur ins Internet ... Bitte
Gruß
Dirk