Hi bin schon am verzeweilfeln, habe lange im inet gesucht finde aber keine Lösung für mein Problem.
ich habe das oben genannte UMTS modem fest verbaut im Notebook und möchte über den Network Manager eine Verbindung aufbauen. Allerdings scheint der Treiber nicht richtig zu funktionieren/ nicht richtig installiert zu sein, .. jedenfalls klappt nichts. Da ich kein Linux experte bin weiß ich auch nicht wonach ich suchen muss. Das gerät wird aber angezeigt:
lsusb liefert:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 | Bus 002 Device 005: ID 174c:55aa ASMedia Technology Inc. ASMedia 2105 SATA bridge Bus 002 Device 004: ID 0af0:7601 Option Globetrotter MO40x 3G Modem (GTM 382) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 0a5c:2101 Broadcom Corp. BCM2045 Bluetooth Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:5931 Syntek Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub |
usb-devices liefert (wesentlicher Teil des Modems)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 | T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7601 Rev=00.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso |
sudo lshw -C network liefert:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 | *-network Beschreibung: Ethernet interface Produkt: 82567V Gigabit Network Connection Hersteller: Intel Corporation Physische ID: 19 Bus-Informationen: pci@0000:00:19.0 Logischer Name: eth0 Version: 03 Seriennummer: 00:13:77:bc:b6:85 Kapazität: 1Gbit/s Breite: 32 bits Takt: 33MHz Fähigkeiten: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair Ressourcen: irq:42 memory:f8600000-f861ffff memory:f8624000-f8624fff ioport:1820(Größe=32) *-network Beschreibung: Kabellose Verbindung Produkt: WiFi Link 5100 Hersteller: Intel Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Logischer Name: wlan0 Version: 00 Seriennummer: 00:1e:65:9a:c6:16 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list ethernet physical wireless Konfiguration: broadcast=yes driver=iwlwifi driverversion=3.13.0-44-generic firmware=8.83.5.1 build 33692 ip=192.168.178.80 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn Ressourcen: irq:44 memory:f4000000-f4001fff |
falls noch andere infos benötigt werden schreibe ich die auch gerne hier rein! Vielen Dank schonmal für die Hilfe!