Hallo liebe Forumsmitglieder,
ich habe kürzlich Ubuntu 14.10 64-bit auf meinem Tablet Lenovo IdeaTab Miix 2 8 installiert.
Dieses hat ein 32-bit UEFI, was ich aber mit Unterstützung aus dem Internet gelöst bekam.
Das Tablet hat einen Intel Atom Z3740 (Baytrail) mit integrierter Grafik.
Ich kann Ubuntu normal booten, aber nur mit "nomodeset" oder "i915.modeset=1"(glaub ich, vllt. wars auch =0).
Über den Wiederherstellungsmodus geht es auch. Nur beim normalen Booten ohne "nomodeset" kommt es zu einem Blackscreen,
nachdem schon einiges an Text vorbeigerauscht ist. Es scheint, dass das Betriebssystem bis auf das Bild voll da ist (kann ich aber
auch nicht 100%ig sagen, da der Sound noch nicht funktioniert). Wenn ich mit "nomodeset" boote, ist die Hardwarebeschleunigung deaktiviert
und mein Prozessor ziemlich ausgelastet. Das Komische ist aber, dass, wenn ich manuell vom Live-Stick das Image auf der Festplatte boote,
die Harwarebeschleunigung funtioniert.
Dort boote ich mit:
1 2 3 | linux (hd1,gpt5)/boot/vmlinuz-3.16.0.31-generic root=/dev/mmcblk0p5 video=VGA-1Ö800x1280e reboot=pci,force initrd (hd1,gpt5)/boot/initrd.img-3.16.0.23-generic boot |
Die gleichen Anweisungen im Grub2 auf der Festplatte (mit hd0 anstatt hd1) resultieren im gleichen Blackscreen wie vorher.
Die Optionen sind natürlich in der /etc/default/grub eingetragen und grub-update wurde ausgeführt.
Was ist beim Booten vom Stick anders?
Die folgenden Angaben sind vom Tablet mit funktionierender Hardwarebeschleunigung (also vom Stick das Image auf der Festplatte geladen):
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2
1 2 3 | 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 09) Kernel driver in use: i915 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 09) |
xrandr --prop
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 | Screen 0: minimum 8 x 8, current 800 x 1280, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI1 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI2 disconnected (normal left inverted right x axis y axis) aspect ratio: Automatic supported: Automatic, 4:3, 16:9 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VGA1 connected primary 800x1280+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 800x1280 60.0* 1024x768 60.0 800x600 60.3 56.2 848x480 60.0 640x480 59.9 VIRTUAL1 disconnected (normal left inverted right x axis y axis) |
/var/log/Xorg.0.log
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 | [ 11.972] X.Org X Server 1.16.0 Release Date: 2014-07-16 [ 11.972] X Protocol Version 11, Revision 0 [ 11.972] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu [ 11.972] Current Operating System: Linux Lenovo-Miix-2-8 3.16.0-31-generic #43-Ubuntu SMP Tue Mar 10 17:37:36 UTC 2015 x86_64 [ 11.972] Kernel command line: BOOT_IMAGE=(hd1,gpt5)/boot/vmlinuz-3.16.0-31-generic root=/dev/mmcblk0p5 video=VGA-1:800x1280e reboot=pci,force [ 11.972] Build Date: 12 February 2015 02:46:23PM [ 11.972] xorg-server 2:1.16.0-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support) [ 11.972] Current version of pixman: 0.32.4 [ 11.972] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 11.972] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 11.973] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 13:48:11 2015 [ 11.973] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 11.974] (==) No Layout section. Using the first Screen section. [ 11.974] (==) No screen section available. Using defaults. [ 11.974] (**) |-->Screen "Default Screen Section" (0) [ 11.974] (**) | |-->Monitor "<default monitor>" [ 11.977] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 11.977] (==) Automatically adding devices [ 11.977] (==) Automatically enabling devices [ 11.977] (==) Automatically adding GPU devices [ 11.977] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 11.977] Entry deleted from font path. [ 11.977] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 11.977] Entry deleted from font path. [ 11.977] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 11.977] Entry deleted from font path. [ 11.977] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 11.977] Entry deleted from font path. [ 11.977] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 11.977] Entry deleted from font path. [ 11.977] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 11.977] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 11.977] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 11.980] (II) Loader magic: 0x7f99a1cf9d80 [ 11.980] (II) Module ABI versions: [ 11.980] X.Org ANSI C Emulation: 0.4 [ 11.980] X.Org Video Driver: 18.0 [ 11.980] X.Org XInput driver : 21.0 [ 11.980] X.Org Server Extension : 8.0 [ 11.981] (II) xfree86: Adding drm device (/dev/dri/card0) [ 11.982] (--) PCI:*(0:0:2:0) 8086:0f31:0000:0000 rev 9, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00001000/8 [ 11.986] (II) LoadModule: "glx" [ 11.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.010] (II) Module glx: vendor="X.Org Foundation" [ 12.010] compiled for 1.16.0, module version = 1.0.0 [ 12.010] ABI class: X.Org Server Extension, version 8.0 [ 12.010] (==) AIGLX enabled [ 12.010] (==) Matched intel as autoconfigured driver 0 [ 12.010] (==) Matched intel as autoconfigured driver 1 [ 12.010] (==) Matched modesetting as autoconfigured driver 2 [ 12.010] (==) Matched fbdev as autoconfigured driver 3 [ 12.010] (==) Matched vesa as autoconfigured driver 4 [ 12.010] (==) Assigned the driver to the xf86ConfigLayout [ 12.010] (II) LoadModule: "intel" [ 12.011] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 12.014] (II) Module intel: vendor="X.Org Foundation" [ 12.014] compiled for 1.16.0, module version = 2.99.917 [ 12.014] Module class: X.Org Video Driver [ 12.014] ABI class: X.Org Video Driver, version 18.0 [ 12.014] (II) LoadModule: "modesetting" [ 12.014] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 12.014] (II) Module modesetting: vendor="X.Org Foundation" [ 12.014] compiled for 1.16.0, module version = 0.9.0 [ 12.014] Module class: X.Org Video Driver [ 12.014] ABI class: X.Org Video Driver, version 18.0 [ 12.014] (II) LoadModule: "fbdev" [ 12.015] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 12.015] (II) Module fbdev: vendor="X.Org Foundation" [ 12.015] compiled for 1.16.0, module version = 0.4.4 [ 12.015] Module class: X.Org Video Driver [ 12.015] ABI class: X.Org Video Driver, version 18.0 [ 12.015] (II) LoadModule: "vesa" [ 12.016] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 12.016] (II) Module vesa: vendor="X.Org Foundation" [ 12.016] compiled for 1.16.0, module version = 2.3.3 [ 12.016] Module class: X.Org Video Driver [ 12.016] ABI class: X.Org Video Driver, version 18.0 [ 12.016] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 12.017] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 12.017] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 12.017] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 12.017] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 12.017] (II) FBDEV: driver for framebuffer: fbdev [ 12.017] (II) VESA: driver for VESA chipsets: vesa [ 12.017] (++) using VT number 7 [ 12.017] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905 [ 12.017] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-1~exp1 (Vincent Cheng <vcheng@debian.org>) [ 12.018] (WW) Falling back to old probe method for modesetting [ 12.018] (WW) Falling back to old probe method for fbdev [ 12.018] (II) Loading sub module "fbdevhw" [ 12.018] (II) LoadModule: "fbdevhw" [ 12.019] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 12.019] (II) Module fbdevhw: vendor="X.Org Foundation" [ 12.019] compiled for 1.16.0, module version = 0.0.2 [ 12.019] ABI class: X.Org Video Driver, version 18.0 [ 12.019] (WW) Falling back to old probe method for vesa [ 12.019] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 12.020] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2 [ 12.020] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12.020] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 12.020] (==) intel(0): RGB weight 888 [ 12.020] (==) intel(0): Default visual is TrueColor [ 12.020] (II) intel(0): Output VGA1 has no monitor section [ 12.020] (II) intel(0): Enabled output VGA1 [ 12.020] (II) intel(0): Output HDMI1 has no monitor section [ 12.020] (II) intel(0): Enabled output HDMI1 [ 12.020] (II) intel(0): Output DP1 has no monitor section [ 12.020] (II) intel(0): Enabled output DP1 [ 12.021] (II) intel(0): Output HDMI2 has no monitor section [ 12.021] (II) intel(0): Enabled output HDMI2 [ 12.021] (II) intel(0): Output DP2 has no monitor section [ 12.021] (II) intel(0): Enabled output DP2 [ 12.021] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 12.021] (II) intel(0): Output VIRTUAL1 has no monitor section [ 12.021] (II) intel(0): Enabled output VIRTUAL1 [ 12.021] (--) intel(0): Output VGA1 using initial mode 800x1280 on pipe 0 [ 12.021] (==) intel(0): TearFree disabled [ 12.021] (==) intel(0): DPI set to (96, 96) [ 12.021] (II) Loading sub module "dri2" [ 12.021] (II) LoadModule: "dri2" [ 12.021] (II) Module "dri2" already built-in [ 12.021] (II) Loading sub module "present" [ 12.021] (II) LoadModule: "present" [ 12.021] (II) Module "present" already built-in [ 12.021] (II) UnloadModule: "modesetting" [ 12.021] (II) Unloading modesetting [ 12.022] (II) UnloadModule: "fbdev" [ 12.022] (II) Unloading fbdev [ 12.022] (II) UnloadSubModule: "fbdevhw" [ 12.022] (II) Unloading fbdevhw [ 12.022] (II) UnloadModule: "vesa" [ 12.022] (II) Unloading vesa [ 12.022] (==) Depth 24 pixmap format is 32 bpp [ 12.025] (II) intel(0): SNA initialized with Baytrail (gen7) backend [ 12.025] (==) intel(0): Backing store enabled [ 12.025] (==) intel(0): Silken mouse enabled [ 12.025] (II) intel(0): HW Cursor enabled [ 12.025] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 12.026] (==) intel(0): DPMS enabled [ 12.027] (==) intel(0): display hotplug detection enabled [ 12.027] (II) intel(0): [DRI2] Setup complete [ 12.027] (II) intel(0): [DRI2] DRI driver: i965 [ 12.027] (II) intel(0): [DRI2] VDPAU driver: i965 [ 12.027] (II) intel(0): direct rendering: DRI2 enabled [ 12.027] (II) intel(0): hardware support for Present enabled [ 12.027] (--) RandR disabled [ 12.038] (II) SELinux: Disabled on system [ 12.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 12.115] (II) AIGLX: enabled GLX_ARB_create_context [ 12.115] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 12.115] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 12.115] (II) AIGLX: enabled GLX_INTEL_swap_event [ 12.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 12.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 12.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 12.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 12.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 12.115] (II) AIGLX: Loaded and initialized i965 [ 12.115] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 12.121] (II) intel(0): switch to mode 800x1280@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 12.136] (II) intel(0): Setting screen physical size to 211 x 338 [ 12.169] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 12.174] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 12.174] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 12.174] (II) LoadModule: "evdev" [ 12.175] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12.177] (II) Module evdev: vendor="X.Org Foundation" [ 12.177] compiled for 1.16.0, module version = 2.9.0 [ 12.178] Module class: X.Org XInput Driver [ 12.178] ABI class: X.Org XInput driver, version 21.0 [ 12.178] (II) Using input driver 'evdev' for 'Video Bus' [ 12.178] (**) Video Bus: always reports core events [ 12.178] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 12.178] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 12.178] (--) evdev: Video Bus: Found keys [ 12.178] (II) evdev: Video Bus: Configuring as keyboard [ 12.178] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2" [ 12.178] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 12.178] (**) Option "xkb_rules" "evdev" [ 12.178] (**) Option "xkb_model" "pc105" [ 12.178] (**) Option "xkb_layout" "de" [ 12.182] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 12.184] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event3) [ 12.185] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall" [ 12.185] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Wireless Mouse' [ 12.185] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events [ 12.185] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: Device: "/dev/input/event3" [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Vendor 0x3938 Product 0x1031 [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found 9 mouse buttons [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found scroll wheel(s) [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found relative axes [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found x and y relative axes [ 12.185] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found absolute axes [ 12.185] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Forcing absolute x/y axes to exist. [ 12.185] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Configuring as mouse [ 12.185] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Adding scrollwheel support [ 12.185] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5 [ 12.185] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 12.185] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:3938:1031.0002/input/input3/event3" [ 12.185] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 7) [ 12.185] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: initialized for relative axes. [ 12.185] (WW) evdev: MOSART Semi. 2.4G Wireless Mouse: ignoring absolute axes. [ 12.186] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1 [ 12.186] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration profile 0 [ 12.186] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000 [ 12.186] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4 [ 12.186] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0) [ 12.187] (II) No input driver specified, ignoring this device. [ 12.187] (II) This device may have been added with another device file. [ 12.187] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4) [ 12.187] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 12.187] (II) Using input driver 'evdev' for ' USB Keyboard' [ 12.187] (**) USB Keyboard: always reports core events [ 12.187] (**) evdev: USB Keyboard: Device: "/dev/input/event4" [ 12.187] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1603 [ 12.188] (--) evdev: USB Keyboard: Found keys [ 12.188] (II) evdev: USB Keyboard: Configuring as keyboard [ 12.188] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:04D9:1603.0003/input/input4/event4" [ 12.188] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8) [ 12.188] (**) Option "xkb_rules" "evdev" [ 12.188] (**) Option "xkb_model" "pc105" [ 12.188] (**) Option "xkb_layout" "de" [ 12.189] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5) [ 12.189] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 12.189] (II) Using input driver 'evdev' for ' USB Keyboard' [ 12.189] (**) USB Keyboard: always reports core events [ 12.189] (**) evdev: USB Keyboard: Device: "/dev/input/event5" [ 12.189] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1603 [ 12.189] (--) evdev: USB Keyboard: Found keys [ 12.189] (II) evdev: USB Keyboard: Configuring as keyboard [ 12.189] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:04D9:1603.0004/input/input5/event5" [ 12.189] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9) [ 12.189] (**) Option "xkb_rules" "evdev" [ 12.189] (**) Option "xkb_model" "pc105" [ 12.189] (**) Option "xkb_layout" "de" [ 12.191] (II) config/udev: Adding input device ATML1000:00 03EB:8C04 (/dev/input/event6) [ 12.191] (**) ATML1000:00 03EB:8C04: Applying InputClass "evdev touchscreen catchall" [ 12.191] (II) Using input driver 'evdev' for 'ATML1000:00 03EB:8C04' [ 12.191] (**) ATML1000:00 03EB:8C04: always reports core events [ 12.191] (**) evdev: ATML1000:00 03EB:8C04: Device: "/dev/input/event6" [ 12.384] (--) evdev: ATML1000:00 03EB:8C04: Vendor 0x3eb Product 0x8c04 [ 12.384] (--) evdev: ATML1000:00 03EB:8C04: Found absolute axes [ 12.384] (--) evdev: ATML1000:00 03EB:8C04: Found absolute multitouch axes [ 12.384] (II) evdev: ATML1000:00 03EB:8C04: No buttons found, faking one. [ 12.384] (--) evdev: ATML1000:00 03EB:8C04: Found x and y absolute axes [ 12.384] (--) evdev: ATML1000:00 03EB:8C04: Found absolute touchscreen [ 12.384] (II) evdev: ATML1000:00 03EB:8C04: Configuring as touchscreen [ 12.384] (**) evdev: ATML1000:00 03EB:8C04: YAxisMapping: buttons 4 and 5 [ 12.384] (**) evdev: ATML1000:00 03EB:8C04: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 12.384] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:05/i2c-4/i2c-ATML1000:00/0018:03EB:8C04.0005/input/input6/event6" [ 12.384] (II) XINPUT: Adding extended input device "ATML1000:00 03EB:8C04" (type: TOUCHSCREEN, id 10) [ 12.384] (II) evdev: ATML1000:00 03EB:8C04: initialized for absolute axes. [ 12.385] (**) ATML1000:00 03EB:8C04: (accel) keeping acceleration scheme 1 [ 12.385] (**) ATML1000:00 03EB:8C04: (accel) acceleration profile 0 [ 12.385] (**) ATML1000:00 03EB:8C04: (accel) acceleration factor: 2.000 [ 12.385] (**) ATML1000:00 03EB:8C04: (accel) acceleration threshold: 4 [ 12.385] (II) config/udev: Adding input device ATML1000:00 03EB:8C04 (/dev/input/mouse1) [ 12.385] (II) No input driver specified, ignoring this device. [ 12.385] (II) This device may have been added with another device file. [ 12.386] (II) config/udev: Adding input device gpio-keys (/dev/input/event0) [ 12.386] (**) gpio-keys: Applying InputClass "evdev keyboard catchall" [ 12.386] (II) Using input driver 'evdev' for 'gpio-keys' [ 12.386] (**) gpio-keys: always reports core events [ 12.386] (**) evdev: gpio-keys: Device: "/dev/input/event0" [ 12.386] (--) evdev: gpio-keys: Vendor 0x1 Product 0x1 [ 12.386] (--) evdev: gpio-keys: Found keys [ 12.386] (II) evdev: gpio-keys: Configuring as keyboard [ 12.386] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys.0.auto/input/input0/event0" [ 12.386] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 11) [ 12.386] (**) Option "xkb_rules" "evdev" [ 12.386] (**) Option "xkb_model" "pc105" [ 12.386] (**) Option "xkb_layout" "de" [ 12.387] (II) config/udev: Adding input device gpio-keys (/dev/input/event1) [ 12.387] (**) gpio-keys: Applying InputClass "evdev keyboard catchall" [ 12.387] (II) Using input driver 'evdev' for 'gpio-keys' [ 12.387] (**) gpio-keys: always reports core events [ 12.387] (**) evdev: gpio-keys: Device: "/dev/input/event1" [ 12.388] (--) evdev: gpio-keys: Vendor 0x1 Product 0x1 [ 12.388] (--) evdev: gpio-keys: Found keys [ 12.388] (II) evdev: gpio-keys: Configuring as keyboard [ 12.388] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys.1.auto/input/input1/event1" [ 12.388] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 12) [ 12.388] (**) Option "xkb_rules" "evdev" [ 12.388] (**) Option "xkb_model" "pc105" [ 12.388] (**) Option "xkb_layout" "de" [ 24.600] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 26.704] [mi] Increasing EQ size to 1024 to prevent dropped events. [ 29.148] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 29.265] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 30.693] (II) XKB: reuse xkmfile /var/lib/xkb/server-F368D20DF3963C9041B5140771273B3C0AD33E46.xkm |
/etc/X11/xorg.conf.03192015
1 2 3 4 5 6 7 8 9 10 11 12 13 14 | Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection |
Hoffe, dass alle nötigen Informationen vorhanden sind und mir vielleiicht jemand helfen und einen Tipp geben kann.
Grüße Yamaha27