schimi
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
Hallo, nachdem ich mehrere Jahre zurück zu Windows gewechselt war bin ich nun wieder auf Kubuntu zurück. Bin sehr positiv überrascht, hat sich doch einiges getan... Leider musste ich feststellen, das mein WLAN (Intel N1030) unter Kubuntu deutlich langsamer ist. Habe eine Synology DiskStation. Unter Kubuntu habe ich diese via NFS eingebunden. Beim Download von großen Datein komme ich auf ca. 7MB/s. Das ist ok, unter Windows war es nur ein bisschen mehr. Beim Upload zur DS komme ich allerdings nur auf 2 MB/S. Unter Windows habe ich mit den gleichen Rechner mind. 5 MB/S. Wo kann ich denn sehen mit welcher Geschwindigkeit ich am Router verbunden bin bzw. ob die Karte überhaupt den WLAN N Modus nutzt?
|
Hans9876543210
Anmeldungsdatum: 2. Januar 2011
Beiträge: 3741
|
schimi schrieb: Wo kann ich denn sehen mit welcher Geschwindigkeit ich am Router verbunden bin bzw. ob die Karte überhaupt den WLAN N Modus nutzt?
Grundsätzlich sollte das über
gehen. Es gibt hier einen Sticky, der alle relevanten Informationen und erforderlichen Abfragen zum Support auflistet. Bei einem Intel Chipsatz sollte das Modul iwlwifi geladen werden, was ggf. noch durch das Setzen von weiteren Parametern ergänzt werden kann. Am besten du arbeitest mal den Sticky ab.
|
Lidux
Anmeldungsdatum: 18. April 2007
Beiträge: 15900
|
Hallo schimi, Die Synology DiskStation ist wie und mit welchem netzwerkfähigen Gerät verbunden ? Gruss Lidux
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
Laut iwconfig bin ich mit 72 MBit am Router (neuestes Airport Modell). WLAN N ist auch aktiviert, hatte ich mal probeweise abgeschaltet. Gleicher Laptop, gleicher Standort, aber mit Windows 7 verbindet er sich mit 144 MBit. Habe auch nicht so viele andere WLANs in der Umgebung die stören könnten bzw. sind weiter weg. Kann eigentlich nur am Linux Treiber liegen.
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Hallo, prüfe die verwendete Firmware und die Regionseinstellungen, ändere diese ggf. und lege diese bei Systemstart entsprechend fest, falls erforderlich:
iw reg get
iw list
grep -i firm /var/log/syslog
→ iw - grep
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
Hier mal die verlangten Daten. CL = Chile ist korrekt. country CL: DFS-UNSET
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5735 - 5835 @ 40), (N/A, 20) Wiphy phy0
max # scan SSIDs: 20
max scan IEs length: 195 bytes
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
Band 1:
Capabilities: 0x1072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-15, 32
TX unequal modulation not supported
HT TX Max spatial streams: 1
HT TX MCS rate indexes supported may differ
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (15.0 dBm)
* 2417 MHz [2] (15.0 dBm)
* 2422 MHz [3] (15.0 dBm)
* 2427 MHz [4] (15.0 dBm)
* 2432 MHz [5] (15.0 dBm)
* 2437 MHz [6] (15.0 dBm)
* 2442 MHz [7] (15.0 dBm)
* 2447 MHz [8] (15.0 dBm)
* 2452 MHz [9] (15.0 dBm)
* 2457 MHz [10] (15.0 dBm)
* 2462 MHz [11] (15.0 dBm)
* 2467 MHz [12] (15.0 dBm) (no IR)
* 2472 MHz [13] (15.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* Unknown command (104)
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
WoWLAN support:
* wake up on disconnect
* wake up on magic packet
* wake up on pattern match, up to 20 patterns of 16-128 bytes,
maximum packet offset 0 bytes
* can do GTK rekeying
* wake up on GTK rekey failure
* wake up on EAP identity request
* wake up on rfkill release
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP } <= 1,
total <= 2, #channels <= 1, STA/AP BI must match
* #{ managed } <= 2,
total <= 2, #channels <= 1
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports scan flush.
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.016262] wlan0: associated
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.016300] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.016395] cfg80211: Calling CRDA for country: CL
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: associating -> associated
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: WPA: Key negotiation completed with 88:1f:a1:33:74:4e [PTK=CCMP GTK=CCMP]
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-CONNECTED - Connection to 88:1f:a1:33:74:4e completed [id=0 id_str=]
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: SME: Trying to authenticate with 88:1f:a1:33:74:4e (SSID='Schimanski' freq=2462 MHz)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034915] cfg80211: Regulatory domain changed to country: CL
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034919] cfg80211: DFS Master region: unset
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034923] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034924] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034926] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034927] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.034937] wlan0: deauthenticating from 88:1f:a1:33:74:4e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.037660] wlan0: authenticate with 88:1f:a1:33:74:4e
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-DISCONNECTED bssid=88:1f:a1:33:74:4e reason=2 locally_generated=1
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: 4-way handshake -> authenticating
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <warn> Connection disconnected (reason -2)
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: Trying to associate with 88:1f:a1:33:74:4e (SSID='Schimanski' freq=2462 MHz)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.047793] wlan0: send auth to 88:1f:a1:33:74:4e (try 1/3)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.048369] cfg80211: Calling CRDA to update world regulatory domain
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.049625] wlan0: authenticated
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.049878] wlan0: associate with 88:1f:a1:33:74:4e (try 1/3)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050710] cfg80211: World regulatory domain updated:
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050713] cfg80211: DFS Master region: unset
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050714] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050719] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050722] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.050723] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.053830] wlan0: RX AssocResp from 88:1f:a1:33:74:4e (capab=0x1411 status=0 aid=11)
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: authenticating -> associating
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.057669] wlan0: associated
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.057828] cfg80211: Calling CRDA for country: CL
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: Associated with 88:1f:a1:33:74:4e
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060121] cfg80211: Regulatory domain changed to country: CL
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060126] cfg80211: DFS Master region: unset
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060127] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060129] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060131] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060133] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.060134] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: associating -> associated
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: WPA: Key negotiation completed with 88:1f:a1:33:74:4e [PTK=CCMP GTK=CCMP]
Apr 21 21:26:27 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-CONNECTED - Connection to 88:1f:a1:33:74:4e completed [id=0 id_str=]
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Schimanski'.
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Apr 21 21:26:27 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Apr 21 21:26:27 andre-Vostro-3550 avahi-daemon[930]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.199.
Apr 21 21:26:27 andre-Vostro-3550 avahi-daemon[930]: New relevant interface wlan0.IPv4 for mDNS.
Apr 21 21:26:27 andre-Vostro-3550 avahi-daemon[930]: Registering new address record for 192.168.1.199 on wlan0.IPv4.
Apr 21 21:26:27 andre-Vostro-3550 kernel: [ 6523.111596] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 88:1f:a1:33:74:4e
Apr 21 21:26:28 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: WPA: Group rekeying completed with 88:1f:a1:33:74:4e [GTK=CCMP]
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> (wlan0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> NetworkManager state is now CONNECTED_GLOBAL
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> Policy set 'Schimanski' (wlan0) as default for IPv4 routing and DNS.
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> Writing DNS information to /sbin/resolvconf
Apr 21 21:26:28 andre-Vostro-3550 dnsmasq[2805]: se establecen los servidores superiores desde DBus
Apr 21 21:26:28 andre-Vostro-3550 dnsmasq[2805]: se usa el servidor 8.8.8.8#53
Apr 21 21:26:28 andre-Vostro-3550 NetworkManager[1072]: <info> Activation (wlan0) successful, device activated.
Apr 21 21:26:29 andre-Vostro-3550 avahi-daemon[930]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::be77:37ff:fe9a:3c7e.
Apr 21 21:26:29 andre-Vostro-3550 avahi-daemon[930]: New relevant interface wlan0.IPv6 for mDNS.
Apr 21 21:26:29 andre-Vostro-3550 avahi-daemon[930]: Registering new address record for fe80::be77:37ff:fe9a:3c7e on wlan0.*.
Apr 21 21:26:35 andre-Vostro-3550 ntpdate[10918]: adjust time server 91.189.89.199 offset 0.043807 sec
Apr 21 21:26:49 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:26:50 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:27:32 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:29:58 andre-Vostro-3550 wpa_supplicant[1481]: message repeated 2 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Apr 21 21:29:59 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:31:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:31:42 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:33:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:35:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:35:42 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:37:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:37:42 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:39:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
Apr 21 21:39:42 andre-Vostro-3550 wpa_supplicant[1481]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Apr 21 21:41:41 andre-Vostro-3550 wpa_supplicant[1481]: wlan0: CTRL-EVENT-SCAN-STARTED
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Ob die Einstellungen für Südamerika, speziell Chile, in der Regionsdatenbank korrekt sind und den dort geltenden gesetzlichen Vorgaben entsprechen, kann ich so direkt nicht sagen, jedenfalls ist die Bandbreite anscheinend auf 20MHz begrenzt, obwohl laut Reg-DB 40MHz erlaubt wären, was den geringeren Datendurchsatz erklären könnte. Teste mal verschiedene Regionseinstellungen durch. Das geht im laufenden Betrieb. Sind sonst noch Modulparameter gesetzt (N-Modus möglicherweise abgeschaltet)?
grep -i iwlwifi /etc/modprobe.d/*
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
Hallo, N Modus ist eingeschaltet. Bin auch wieder mit 72 MBit verbunden. /etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:#options iwlwifi 11n_disable=1
Wenn die Bandbreite wirklich auf 20 MHZ begrenzt ist, bin ich 100% sicher das es daran liegt. Wenn ich das unter Windows mache habe ich die gleiche Geschwindigkeit. Wie ändere ich die Regionseinstellung? Habe mal im KDE auf Deutschland umgestellt, allerdings bekomme ich bei iw reg get immer noch CL als Region angezeigt? Neustart habe ich schon gemacht. Wie kann ich die 40 MHZ noch aktivieren?
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
40 MHz Bandbreite ist auch mit Einstellung CL erlaubt, wird aber anscheinend nicht übernommen. Die erzielte Übertragunsrate wäre typisch für 2xMIMO bei 20MHz Bandbreite.
Wie ändere ich die Regionseinstellung?
Hatte ich bereits verlinkt - iw Gibt es schon eine udev-Regel?
grep -i regulatory /etc/udev/rules.d/*
Entferne sicherheitshalber mal die Zeile mit den Modul-Optionen, obwohl eine Raute davor steht. Der N-Modus war ja mal abgeschaltet
sudo sed -i "/#options/d" /etc/modprobe.d/iwlwifi.conf
Neustart.
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
udev habe ich zwei datein ACTION=="add|change", KERNEL=="sd[a-z]", ATTR{queue/rotational}=="1",ATTR{queue/scheduler}="cfq" # PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="78:2b:cb:f8:b1:14", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x008a (iwlwifi)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="bc:77:37:9a:3c:7e", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" N Modus hatte ich testhalber abgeschaltet und dann deaktiviert. Habe es wieder entfernt. Bezüglich IW, Mit sudo iw reg set DE Passiert gar nichts. Wenn ich wie beschrieben diese Datei anlege /etc/udev/rules.d/regulatory.rules und folgendes einfüge KERNEL=="regulatory*", ACTION=="change", SUBSYSTEM=="platform", RUN+="/sbin/iw reg set DE" Habe ich dann immer noch 20 MHZ und country 98: DFS-UNSET
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
(5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Das funktioniert leider nicht, es muss noch an etwas anderem liegen. Entferne die udev-Regel:
sudo rm /etc/udev/rules.d/regulatory.rules Verbindungsstatus?
iw dev wlan0 link
Versuche dann im laufenden Betrieb ein ...
sudo iw dev wlan0 set bitrates mcs-2.4 12
iw dev wlan0 link
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
So, ich hab mal eine Neuinstallation auf Kubuntu 15.04 durchgefuehrt. Problem ist aber das gleiche. Am Router habe ich mal verschiedene Kanaele probiert, keine Besserung Connected to 88:1f:a1:33:74:4e (on wlan0)
SSID: Schimanski
freq: 2412
RX: 7008986 bytes (7445 packets)
TX: 484992 bytes (3203 packets)
signal: -42 dBm
tx bitrate: 72.2 MBit/s MCS 7 short GI bss flags: short-slot-time
dtim period: 3
beacon int: 100 sudo iw dev wlan0 set bitrates mcs-2.4 12 scheint nicht zu funktionieren.
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Hallo, ich vermute mal, es liegt an der Firmware. Welche Version verlangt das Treibermodul und welche Dateien sind tatsächlich vorhanden?
modinfo -F firmware iwlwifi
ls /lib/firmware | grep iwl
|
schimi
(Themenstarter)
Anmeldungsdatum: 23. November 2005
Beiträge: 662
Wohnort: Santiago de Chile
|
modinfo -F firmware iwlwifi
iwlwifi-100-5.ucode
iwlwifi-1000-5.ucode
iwlwifi-135-6.ucode
iwlwifi-105-6.ucode
iwlwifi-2030-6.ucode
iwlwifi-2000-6.ucode
iwlwifi-5150-2.ucode
iwlwifi-5000-5.ucode
iwlwifi-6000g2b-6.ucode
iwlwifi-6000g2a-5.ucode
iwlwifi-6050-5.ucode
iwlwifi-6000-4.ucode
iwlwifi-7265D-10.ucode
iwlwifi-7265-10.ucode
iwlwifi-3165-10.ucode
iwlwifi-3160-10.ucode
iwlwifi-7260-10.ucode
iwlwifi-8000-10.ucode ls /lib/firmware | grep iwl
iwlwifi-1000-5.ucode
iwlwifi-100-5.ucode
iwlwifi-105-6.ucode
iwlwifi-135-6.ucode
iwlwifi-2000-6.ucode
iwlwifi-2030-6.ucode
iwlwifi-3160-10.ucode
iwlwifi-3160-12.ucode
iwlwifi-3160-7.ucode
iwlwifi-3160-8.ucode
iwlwifi-3160-9.ucode
iwlwifi-3945-2.ucode
iwlwifi-4965-2.ucode
iwlwifi-5000-5.ucode
iwlwifi-5150-2.ucode
iwlwifi-6000-4.ucode
iwlwifi-6000g2a-5.ucode
iwlwifi-6000g2a-6.ucode
iwlwifi-6000g2b-6.ucode
iwlwifi-6050-5.ucode
iwlwifi-7260-10.ucode
iwlwifi-7260-12.ucode
iwlwifi-7260-7.ucode
iwlwifi-7260-8.ucode
iwlwifi-7260-9.ucode
iwlwifi-7265-10.ucode
iwlwifi-7265-12.ucode
iwlwifi-7265-8.ucode
iwlwifi-7265-9.ucode
iwlwifi-7265D-10.ucode
iwlwifi-7265D-12.ucode
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Laut Liste benötigt die 1030er Karte die Firmware iwlwifi-6000g2b-6.ucode. Die Kontrolle hatte bei der Abfrage des Syslog zuvor leider nicht funktioniert, es wurde bezüglich der Firmware nichts angezeigt. Verschiebe mal alle Intel Firmwaredateien aus /lib/firmware in einen Backupordner und installiere jeweils einzeln die älteren Versionen 17.168.5.1 und 17.168.5.2. Findet der Treiber die bevorzugte Version 6 der Firmware nicht, werden normalerweise auch ältere Varianten geladen. Schalte den Rechner nach der Installation der älteren Firmware jeweils aus und entferne die Netzversorgung und Akku für ein paar Minuten um die momentan geladene Firmware sicher zu entladen. Starte den Rechner dann neu und teste.
|