Letalis Sonus schrieb:
Jetzt wo du es sagst, das ist das erste mal, dass ich diese Fehlermeldung sehe. Normalerweise gibt es mit der Initialisierung der Grafikkarte selbst nie Probleme. Möglicherweise macht eine Modifikation vom Notebook Hersteller Probleme. Ob man dann etwas dagegen machen kann ist fraglich...
Der Log mit dieser Meldung wäre jetzt interessant, wenn du dann in den low graphics Modus gehst such mal die dazugehörige Xorg.0.log raus, die müsste dann Xorg.0.log.old oder so heißen. Gib uns zusätzlich dann noch die Ausgabe von dmesg
.
ich frag mich woran es sich plötzlich so "spießt" es hat nun zwei Jahre keine Probleme mit der Grphik gegeben und dann plötzlich nun diese aussetzer und flackerein.
edit: hab nun diff über die folgenden zwei ausgaben laufen lassen, die sind vollkommen ident
das ist nun Xorg.0.log.old
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
Current Operating System: Linux kaminfeuer 2.6.32-27-generic-pae #49-Ubuntu SMP Thu Dec 2 00:07:52 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-27-generic-pae root=UUID=08746671-e314-45c3-8e55-a24cd6ad3984 ro
Build Date: 10 November 2010 11:25:26AM
xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 29 15:50:32 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81f1b20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0427:1028:026f nVidia Corporation G86 [GeForce 8400M GS] rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.18 Tue Jul 13 13:31:40 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.18 Tue Jul 13 13:20:14 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(1): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(1): additional information.
(EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(1): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: Closing log
das die Xorg.0.log
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
Current Operating System: Linux kaminfeuer 2.6.32-27-generic-pae #49-Ubuntu SMP Thu Dec 2 00:07:52 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-27-generic-pae root=UUID=08746671-e314-45c3-8e55-a24cd6ad3984 ro
Build Date: 10 November 2010 11:25:26AM
xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 30 00:22:38 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81f1b20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0427:1028:026f nVidia Corporation G86 [GeForce 8400M GS] rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.18 Tue Jul 13 13:31:40 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.18 Tue Jul 13 13:20:14 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(1): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(1): additional information.
(EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(1): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(II) UnloadModule: "nvidia"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: Closing log
und hier dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-27-generic-pae (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #49-Ubuntu SMP Thu Dec 2 00:07:52 UTC 2010 (Ubuntu 2.6.32-27.49-generic-pae 2.6.32.26+drm33.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] modified: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00e00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37364000 - 37fef1cc
[ 0.000000] Allocated new RAMDISK: 0093e000 - 015c91cc
[ 0.000000] Move RAMDISK from 0000000037364000 - 0000000037fef1cb to 0093e000 - 015c91cb
[ 0.000000] ACPI: RSDP 000f7600 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT bfed6aa0 00094 (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bfedeb60 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT bfed7c3b 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS bfee2fc0 00040
[ 0.000000] ACPI: APIC bfedec54 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET bfedecbc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG bfedecf4 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA bfeded30 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR bfeded62 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: OSFR bfeded88 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC bfededfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT bfedee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC bfedee8a 00176 (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT bfed798e 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT bfed70c0 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT bfed701a 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT bfed6b34 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00009000 - 0000ff40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000935818] TEXT DATA BSS ==> [0000100000 - 0000935818]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0000936000 - 000093d10c] BRK ==> [0000936000 - 000093d10c]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [000093e000 - 00015c91cc] NEW RAMDISK ==> [000093e000 - 00015c91cc]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f7680] f7680
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048171
[ 0.000000] free_area_init_node: node 0, pgdat c07d8d60, node_mem_map c15cb000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 811973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3e00000 s39480 r0 d21960 u1048576
[ 0.000000] pcpu-alloc: s39480 r0 d21960 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037930
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-27-generic-pae root=UUID=08746671-e314-45c3-8e55-a24cd6ad3984 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 26214400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4102744k/5242880k available (4835k kernel code, 88864k reserved, 2218k data, 672k init, 3281736k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc07e4000 - 0xc088c000 ( 672 kB)
[ 0.000000] .data : 0xc05b8ebf - 0xc07e36e8 (2218 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05b8ebf (4835 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.099 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.19 BogoMIPS (lpj=7980396)
[ 0.004168] Security Framework initialized
[ 0.004263] AppArmor: AppArmor initialized
[ 0.004339] Mount-cache hash table entries: 512
[ 0.004588] Initializing cgroup subsys ns
[ 0.004660] Initializing cgroup subsys cpuacct
[ 0.004735] Initializing cgroup subsys memory
[ 0.004814] Initializing cgroup subsys devices
[ 0.004886] Initializing cgroup subsys freezer
[ 0.004955] Initializing cgroup subsys net_cls
[ 0.006523] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008006] CPU: L2 cache: 2048K
[ 0.008078] CPU: Physical Processor ID: 0
[ 0.008148] CPU: Processor Core ID: 0
[ 0.008220] mce: CPU supports 6 MCE banks
[ 0.008298] CPU0: Thermal monitoring handled by SMI
[ 0.008304] using mwait in idle threads.
[ 0.008380] Performance Events: Core2 events, Intel PMU driver.
[ 0.008565] ... version: 2
[ 0.008636] ... bit width: 40
[ 0.008706] ... generic registers: 2
[ 0.008777] ... value mask: 000000ffffffffff
[ 0.008849] ... max period: 000000007fffffff
[ 0.008921] ... fixed-purpose events: 3
[ 0.008991] ... event mask: 0000000700000003
[ 0.009065] Checking 'hlt' instruction... OK.
[ 0.028569] ACPI: Core revision 20090903
[ 0.048013] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048093] ftrace: allocating 22417 entries in 44 pages
[ 0.052077] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093370] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.180105] CPU1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.180633] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184025] Brought up 2 CPUs
[ 0.184096] Total of 2 processors activated (7980.20 BogoMIPS).
[ 0.184851] CPU0 attaching sched-domain:
[ 0.184857] domain 0: span 0-1 level MC
[ 0.184861] groups: 0 1
[ 0.184871] CPU1 attaching sched-domain:
[ 0.184875] domain 0: span 0-1 level MC
[ 0.184879] groups: 1 0
[ 0.184971] devtmpfs: initialized
[ 0.184971] regulator: core version 0.5
[ 0.184971] Time: 23:22:03 Date: 12/29/10
[ 0.184971] NET: Registered protocol family 16
[ 0.184971] Trying to unpack rootfs image as initramfs...
[ 0.184971] EISA bus registered
[ 0.184971] ACPI: bus type pci registered
[ 0.184971] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184971] PCI: MCFG area at e0000000 reserved in E820
[ 0.184971] PCI: Using MMCONFIG for extended config space
[ 0.185029] PCI: Using configuration type 1 for base access
[ 0.192208] bio: create slab <bio-0> at 0
[ 0.194086] ACPI: EC: Look up EC in DSDT
[ 0.204081] ACPI: BIOS _OSI(Linux) query ignored
[ 0.208137] ACPI: Interpreter enabled
[ 0.208216] ACPI: (supports S0 S3 S4 S5)
[ 0.208531] ACPI: Using IOAPIC for interrupt routing
[ 0.285278] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.285946] ACPI: No dock devices found.
[ 0.286910] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.287172] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.287247] pci 0000:00:01.0: PME# disabled
[ 0.287436] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.287520] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.287612] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8304800-0xf8304bff]
[ 0.287694] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.287771] pci 0000:00:1a.7: PME# disabled
[ 0.287904] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8300000-0xf8303fff]
[ 0.287976] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.288011] pci 0000:00:1b.0: PME# disabled
[ 0.288190] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.288268] pci 0000:00:1c.0: PME# disabled
[ 0.288456] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.288534] pci 0000:00:1c.1: PME# disabled
[ 0.288717] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.288794] pci 0000:00:1c.3: PME# disabled
[ 0.288976] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.289053] pci 0000:00:1c.4: PME# disabled
[ 0.289201] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
[ 0.289279] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
[ 0.289360] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
[ 0.289453] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8304c00-0xf8304fff]
[ 0.289535] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.289614] pci 0000:00:1d.7: PME# disabled
[ 0.289888] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.289978] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.290057] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.290146] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.290299] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.290310] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.290321] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.290332] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.290343] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
[ 0.290440] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[ 0.290451] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
[ 0.290462] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
[ 0.290473] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
[ 0.290484] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.290495] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8304000-0xf83047ff]
[ 0.290546] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.290623] pci 0000:00:1f.2: PME# disabled
[ 0.290731] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.290761] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.290865] pci 0000:01:00.0: reg 10 32bit mmio: [0xca000000-0xcaffffff]
[ 0.290887] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.290909] pci 0000:01:00.0: reg 1c 64bit mmio: [0xc8000000-0xc9ffffff]
[ 0.290923] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.290936] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.291073] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.291079] pci 0000:00:01.0: bridge 32bit mmio: [0xc8000000-0xcaffffff]
[ 0.291088] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.291163] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.291171] pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff]
[ 0.291182] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
[ 0.291256] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.291264] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.291275] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
[ 0.291478] pci 0000:06:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff]
[ 0.291738] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.291832] pci 0000:06:00.0: PME# disabled
[ 0.292099] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
[ 0.292106] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.292117] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
[ 0.292297] pci 0000:07:00.0: reg 10 io port: [0x6000-0x60ff]
[ 0.292379] pci 0000:07:00.0: reg 18 64bit mmio pref: [0xf8410000-0xf8410fff]
[ 0.292436] pci 0000:07:00.0: reg 20 64bit mmio pref: [0xf8400000-0xf840ffff]
[ 0.292468] pci 0000:07:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.292636] pci 0000:07:00.0: supports D1 D2
[ 0.292640] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.292729] pci 0000:07:00.0: PME# disabled
[ 0.292971] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
[ 0.292986] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8400000-0xf84fffff]
[ 0.293052] pci 0000:08:05.0: reg 10 32bit mmio: [0xf8000000-0xf8000fff]
[ 0.293064] pci 0000:08:05.0: reg 14 32bit mmio: [0xf8002000-0xf80027ff]
[ 0.293130] pci 0000:08:05.0: supports D1 D2
[ 0.293134] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.293212] pci 0000:08:05.0: PME# disabled
[ 0.293344] pci 0000:08:05.2: reg 10 32bit mmio: [0xf8002800-0xf80028ff]
[ 0.293433] pci 0000:08:05.2: supports D1 D2
[ 0.293437] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.293516] pci 0000:08:05.2: PME# disabled
[ 0.293648] pci 0000:08:05.3: reg 10 32bit mmio: [0xf8001000-0xf8001fff]
[ 0.293734] pci 0000:08:05.3: supports D1 D2
[ 0.293738] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.293816] pci 0000:08:05.3: PME# disabled
[ 0.293967] pci 0000:00:1e.0: transparent bridge
[ 0.294046] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.294096] pci_bus 0000:00: on NUMA node 0
[ 0.294105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.294492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.294641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.294771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.294908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.295038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.295222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.314439] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.315326] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.316160] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.317037] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.317910] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.318905] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.319785] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.320714] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.321697] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.321791] vgaarb: loaded
[ 0.322046] SCSI subsystem initialized
[ 0.322245] libata version 3.00 loaded.
[ 0.322363] usbcore: registered new interface driver usbfs
[ 0.322454] usbcore: registered new interface driver hub
[ 0.322572] usbcore: registered new device driver usb
[ 0.322914] ACPI: WMI: Mapper loaded
[ 0.322985] PCI: Using ACPI for IRQ routing
[ 0.323466] NetLabel: Initializing
[ 0.323537] NetLabel: domain hash size = 128
[ 0.323608] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.323697] NetLabel: unlabeled traffic allowed by default
[ 0.323817] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.324126] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.328483] Switching to clocksource tsc
[ 0.331509] AppArmor: AppArmor Filesystem Enabled
[ 0.331603] pnp: PnP ACPI init
[ 0.331691] ACPI: bus type pnp registered
[ 0.362595] pnp: PnP ACPI: found 10 devices
[ 0.362673] ACPI: ACPI bus type pnp unregistered
[ 0.362748] PnPBIOS: Disabled by ACPI PNP
[ 0.362837] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.362915] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.362991] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.363067] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.363144] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.363221] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.363298] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.363376] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.363460] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.363544] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.363620] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.363697] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.363773] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.363850] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.363924] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.398927] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.399023] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.399097] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.399173] pci 0000:00:01.0: MEM window: 0xc8000000-0xcaffffff
[ 0.399250] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.399341] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.399417] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.399494] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff
[ 0.399574] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff
[ 0.399668] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.399744] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.399821] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff
[ 0.399899] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff
[ 0.399992] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.400067] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.400146] pci 0000:00:1c.3: MEM window: 0xf4000000-0xf7ffffff
[ 0.400222] pci 0000:00:1c.3: PREFETCH window: 0x000000fc000000-0x000000fdffffff
[ 0.400317] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.400392] pci 0000:00:1c.4: IO window: 0x6000-0x6fff
[ 0.400471] pci 0000:00:1c.4: MEM window: 0xc4000000-0xc43fffff
[ 0.400550] pci 0000:00:1c.4: PREFETCH window: 0x000000f8400000-0x000000f84fffff
[ 0.400645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.400721] pci 0000:00:1e.0: IO window: disabled
[ 0.400799] pci 0000:00:1e.0: MEM window: 0xf8000000-0xf80fffff
[ 0.400875] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.400970] alloc irq_desc for 16 on node -1
[ 0.400973] alloc kstat_irqs on node -1
[ 0.400985] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.401064] pci 0000:00:01.0: setting latency timer to 64
[ 0.401082] alloc irq_desc for 17 on node -1
[ 0.401086] alloc kstat_irqs on node -1
[ 0.401092] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.401171] pci 0000:00:1c.0: setting latency timer to 64
[ 0.401186] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.401264] pci 0000:00:1c.1: setting latency timer to 64
[ 0.401278] alloc irq_desc for 19 on node -1
[ 0.401281] alloc kstat_irqs on node -1
[ 0.401287] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.401365] pci 0000:00:1c.3: setting latency timer to 64
[ 0.401380] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.401458] pci 0000:00:1c.4: setting latency timer to 64
[ 0.401470] pci 0000:00:1e.0: setting latency timer to 64
[ 0.401477] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.401482] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.401486] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.401491] pci_bus 0000:01: resource 1 mem: [0xc8000000-0xcaffffff]
[ 0.401495] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.401500] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.401504] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff]
[ 0.401509] pci_bus 0000:02: resource 2 pref mem [0xcc000000-0xcdffffff]
[ 0.401513] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.401518] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf3ffffff]
[ 0.401522] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfbffffff]
[ 0.401527] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
[ 0.401531] pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.401535] pci_bus 0000:06: resource 2 pref mem [0xfc000000-0xfdffffff]
[ 0.401540] pci_bus 0000:07: resource 0 io: [0x6000-0x6fff]
[ 0.401544] pci_bus 0000:07: resource 1 mem: [0xc4000000-0xc43fffff]
[ 0.401548] pci_bus 0000:07: resource 2 pref mem [0xf8400000-0xf84fffff]
[ 0.401553] pci_bus 0000:08: resource 1 mem: [0xf8000000-0xf80fffff]
[ 0.401557] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.401562] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.401625] NET: Registered protocol family 2
[ 0.401860] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.402478] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.403157] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.403516] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.403591] TCP reno registered
[ 0.403790] NET: Registered protocol family 1
[ 0.404083] pci 0000:01:00.0: Boot video device
[ 0.404131] Simple Boot Flag at 0x36 set to 0x1
[ 0.404466] cpufreq-nforce2: No nForce2 chipset.
[ 0.404581] Scanning for low memory corruption every 60 seconds
[ 0.406275] audit: initializing netlink socket (disabled)
[ 0.406363] type=2000 audit(1293664923.406:1): initialized
[ 0.423840] highmem bounce pool size: 64 pages
[ 0.423923] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.426490] VFS: Disk quotas dquot_6.5.2
[ 0.426663] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.427714] fuse init (API version 7.13)
[ 0.427932] msgmni has been set to 1605
[ 0.428347] alg: No test for stdrng (krng)
[ 0.428509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.428599] io scheduler noop registered
[ 0.428672] io scheduler anticipatory registered
[ 0.428744] io scheduler deadline registered
[ 0.428880] io scheduler cfq registered (default)
[ 0.429196] alloc irq_desc for 24 on node -1
[ 0.429200] alloc kstat_irqs on node -1
[ 0.429213] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.429224] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.429417] alloc irq_desc for 25 on node -1
[ 0.429420] alloc kstat_irqs on node -1
[ 0.429433] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.429448] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.429667] alloc irq_desc for 26 on node -1
[ 0.429670] alloc kstat_irqs on node -1
[ 0.429682] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.429698] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.429911] alloc irq_desc for 27 on node -1
[ 0.429914] alloc kstat_irqs on node -1
[ 0.429927] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.429942] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.430157] alloc irq_desc for 28 on node -1
[ 0.430161] alloc kstat_irqs on node -1
[ 0.430173] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.430198] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.430357] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.430691] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.435271] ACPI: AC Adapter [ACAD] (on-line)
[ 0.435465] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.435623] ACPI: Lid Switch [LID0]
[ 0.435766] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.435855] ACPI: Power Button [PWRB]
[ 0.436001] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.436092] ACPI: Sleep Button [SLPB]
[ 0.436258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.436347] ACPI: Power Button [PWRF]
[ 0.437685] ACPI: SSDT bfed731f 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.439178] Monitor-Mwait will be used to enter C-1 state
[ 0.439228] Monitor-Mwait will be used to enter C-2 state
[ 0.439269] Monitor-Mwait will be used to enter C-3 state
[ 0.439280] Marking TSC unstable due to TSC halts in idle
[ 0.439441] processor LNXCPU:00: registered as cooling_device0
[ 0.440078] ACPI: SSDT bfed7909 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.441197] Switching to clocksource hpet
[ 0.449204] processor LNXCPU:01: registered as cooling_device1
[ 0.483080] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.485459] brd: module loaded
[ 0.486327] loop: module loaded
[ 0.486550] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.486830] ata_piix 0000:00:1f.1: version 2.13
[ 0.486849] alloc irq_desc for 18 on node -1
[ 0.486853] alloc kstat_irqs on node -1
[ 0.486863] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.486998] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.487112] scsi0 : ata_piix
[ 0.487299] scsi1 : ata_piix
[ 0.488360] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.488440] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.489102] Fixed MDIO Bus: probed
[ 0.489227] PPP generic driver version 2.4.2
[ 0.489357] tun: Universal TUN/TAP device driver, 1.6
[ 0.489430] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.489653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.489757] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.489854] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.489860] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.489981] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.490107] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.494060] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.494123] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
[ 0.498183] isapnp: Scanning for PnP cards...
[ 0.547502] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.547772] usb usb1: configuration #1 chosen from 1 choice
[ 0.547899] hub 1-0:1.0: USB hub found
[ 0.547987] hub 1-0:1.0: 4 ports detected
[ 0.548172] alloc irq_desc for 23 on node -1
[ 0.548176] alloc kstat_irqs on node -1
[ 0.548186] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.548289] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.548295] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.548422] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.548545] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.552501] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.552560] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
[ 0.600251] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.600354] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.600602] usb usb2: configuration #1 chosen from 1 choice
[ 0.600722] hub 2-0:1.0: USB hub found
[ 0.600806] hub 2-0:1.0: 6 ports detected
[ 0.600979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.601087] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.601224] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.601310] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.601316] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.601443] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.601581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.601803] usb usb3: configuration #1 chosen from 1 choice
[ 0.601919] hub 3-0:1.0: USB hub found
[ 0.601998] hub 3-0:1.0: 2 ports detected
[ 0.602141] alloc irq_desc for 21 on node -1
[ 0.602144] alloc kstat_irqs on node -1
[ 0.602153] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.602237] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.602243] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.602371] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.602500] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.602715] usb usb4: configuration #1 chosen from 1 choice
[ 0.602831] hub 4-0:1.0: USB hub found
[ 0.602911] hub 4-0:1.0: 2 ports detected
[ 0.603055] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.603140] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.603145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.603276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.603394] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.603612] usb usb5: configuration #1 chosen from 1 choice
[ 0.603728] hub 5-0:1.0: USB hub found
[ 0.603807] hub 5-0:1.0: 2 ports detected
[ 0.603949] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.604179] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.604185] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.604307] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.604435] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.604652] usb usb6: configuration #1 chosen from 1 choice
[ 0.604768] hub 6-0:1.0: USB hub found
[ 0.604848] hub 6-0:1.0: 2 ports detected
[ 0.604993] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.605079] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.605084] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.605211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.605331] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.605545] usb usb7: configuration #1 chosen from 1 choice
[ 0.605660] hub 7-0:1.0: USB hub found
[ 0.605740] hub 7-0:1.0: 2 ports detected
[ 0.605967] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.641410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.641499] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.641808] mice: PS/2 mouse device common for all mice
[ 0.644920] rtc_cmos 00:07: RTC can wake from S4
[ 0.645066] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.645178] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.645440] device-mapper: uevent: version 1.0.3
[ 0.689392] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.710276] Freeing initrd memory: 12844k freed
[ 0.725423] ata1.00: ATAPI: TEAC DVD+/-RW DVW28SLC, A.06, max UDMA/33
[ 0.725815] device-mapper: multipath: version 1.1.0 loaded
[ 0.725893] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.726233] EISA: Probing bus 0 at eisa.0
[ 0.726315] Cannot allocate resource for EISA slot 1
[ 0.726391] Cannot allocate resource for EISA slot 2
[ 0.726467] Cannot allocate resource for EISA slot 3
[ 0.726539] Cannot allocate resource for EISA slot 4
[ 0.726613] Cannot allocate resource for EISA slot 5
[ 0.726687] Cannot allocate resource for EISA slot 6
[ 0.726773] EISA: Detected 0 cards.
[ 0.727072] cpuidle: using governor ladder
[ 0.727334] cpuidle: using governor menu
[ 0.728182] TCP cubic registered
[ 0.728507] NET: Registered protocol family 10
[ 0.729399] lo: Disabled Privacy Extensions
[ 0.730061] NET: Registered protocol family 17
[ 0.730213] Using IPI No-Shortcut mode
[ 0.730421] PM: Resume from disk failed.
[ 0.730439] registered taskstats version 1
[ 0.731442] Magic number: 6:481:404
[ 0.731626] rtc_cmos 00:07: setting system clock to 2010-12-29 23:22:04 UTC (1293664924)
[ 0.731715] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.731790] EDD information not available.
[ 0.745422] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.761923] ata1.00: configured for UDMA/33
[ 0.916210] isapnp: No Plug & Play device found
[ 0.925715] scsi 0:0:0:0: CD-ROM TEAC DVD+-RW DVW28SLC A.06 PQ: 0 ANSI: 5
[ 0.953901] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 0.953993] Uniform CD-ROM driver Revision: 3.20
[ 0.954231] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.954334] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.954546] Freeing unused kernel memory: 672k freed
[ 0.955102] Write protecting the kernel text: 4836k
[ 0.955347] Write protecting the kernel read-only data: 1884k
[ 0.986628] udev: starting version 151
[ 1.048644] vga16fb: initializing
[ 1.048650] vga16fb: mapped to 0xc00a0000
[ 1.048804] fb0: VGA16 VGA frame buffer device
[ 1.166700] Linux agpgart interface v0.103
[ 1.176039] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 1.178749] ahci 0000:00:1f.2: version 3.0
[ 1.178776] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.178916] alloc irq_desc for 29 on node -1
[ 1.178920] alloc kstat_irqs on node -1
[ 1.178936] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.179021] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.179109] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.179199] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.182960] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.183081] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.183261] r8169 0000:07:00.0: setting latency timer to 64
[ 1.183423] alloc irq_desc for 30 on node -1
[ 1.183427] alloc kstat_irqs on node -1
[ 1.183469] r8169 0000:07:00.0: irq 30 for MSI/MSI-X
[ 1.184607] eth0: RTL8168c/8111c at 0xf8324000, 00:21:70:96:a2:40, XID 1c4000c0 IRQ 30
[ 1.189345] scsi2 : ahci
[ 1.202775] scsi3 : ahci
[ 1.203598] scsi4 : ahci
[ 1.203907] ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 29
[ 1.203996] ata4: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 29
[ 1.204106] ata5: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 29
[ 1.220330] acpi device:03: registered as cooling_device2
[ 1.220754] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 1.220918] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.365960] usb 3-2: configuration #1 chosen from 1 choice
[ 1.524185] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.524296] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.524392] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.525376] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.525588] ata3.00: _GTF unexpected object type 0x1
[ 1.526061] ata3.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[ 1.526137] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.527620] ata3.00: _GTF unexpected object type 0x1
[ 1.528223] ata3.00: configured for UDMA/133
[ 1.544376] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 1.544753] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.544821] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.544905] sd 2:0:0:0: [sda] Write Protect is off
[ 1.544909] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.545045] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.545494] sda: sda1 sda2 < sda5 sda6 >
[ 1.600056] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.612148] alloc irq_desc for 22 on node -1
[ 1.612153] alloc kstat_irqs on node -1
[ 1.612163] ohci1394 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.669105] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8000000-f80007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 1.822386] Console: switching to colour frame buffer device 80x30
[ 2.244208] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.944514] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004010a000b000]
[ 10.817774] udev: starting version 151
[ 10.856650] Adding 3417080k swap on /dev/sda5. Priority:-1 extents:1 across:3417080k
[ 11.242378] cfg80211: Calling CRDA to update world regulatory domain
[ 11.273366] cfg80211: World regulatory domain updated:
[ 11.273372] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.273378] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.273382] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.273387] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.273391] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.273396] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.303766] type=1505 audit(1293664935.069:2): operation="profile_load" pid=657 name="/sbin/dhclient3"
[ 11.304974] type=1505 audit(1293664935.069:3): operation="profile_load" pid=657 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.305777] type=1505 audit(1293664935.073:4): operation="profile_load" pid=657 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.576097] nvidia: module license 'NVIDIA' taints kernel.
[ 11.576103] Disabling lock debugging due to kernel taint
[ 11.847147] lp: driver loaded but no devices found
[ 11.994436] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.994478] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.008396] Bluetooth: Core ver 2.15
[ 12.008514] NET: Registered protocol family 31
[ 12.008518] Bluetooth: HCI device and connection manager initialized
[ 12.008522] Bluetooth: HCI socket layer initialized
[ 12.011423] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.011577] usbcore: registered new interface driver btusb
[ 12.021426] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.049723] sdhci: Secure Digital Host Controller Interface driver
[ 12.049728] sdhci: Copyright(c) Pierre Ossman
[ 12.057869] sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2)
[ 12.057897] sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.057936] mmc0: Unknown controller version (2). You may experience problems.
[ 12.058243] Registered led device: mmc0::
[ 12.058293] mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA
[ 12.187536] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 12.187555] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 12.187570] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.187583] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.187592] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.188787] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.18 Tue Jul 13 13:16:20 PDT 2010
[ 12.190879] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 12.201011] hda_codec: ALC268: BIOS auto-probing.
[ 12.201337] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.222900] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.222907] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 12.223046] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 12.223063] iwl3945 0000:06:00.0: setting latency timer to 64
[ 12.319420] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 12.319426] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 12.319554] alloc irq_desc for 31 on node -1
[ 12.319558] alloc kstat_irqs on node -1
[ 12.319597] iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
[ 12.334414] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 12.909099] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 12.950164] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 34.875522] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 35.018484] type=1505 audit(1293664958.784:5): operation="profile_load" pid=969 name="/usr/share/gdm/guest-session/Xsession"
[ 35.025663] type=1505 audit(1293664958.792:6): operation="profile_replace" pid=970 name="/sbin/dhclient3"
[ 35.026885] type=1505 audit(1293664958.792:7): operation="profile_replace" pid=970 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 35.027564] type=1505 audit(1293664958.792:8): operation="profile_replace" pid=970 name="/usr/lib/connman/scripts/dhclient-script"
[ 35.050442] type=1505 audit(1293664958.816:9): operation="profile_load" pid=978 name="/usr/lib/cups/backend/cups-pdf"
[ 35.052862] type=1505 audit(1293664958.820:10): operation="profile_load" pid=978 name="/usr/sbin/cupsd"
[ 35.058150] type=1505 audit(1293664958.824:11): operation="profile_load" pid=979 name="/usr/sbin/tcpdump"
[ 35.067248] type=1505 audit(1293664958.832:12): operation="profile_load" pid=971 name="/usr/bin/evince"
[ 35.073653] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 35.091442] type=1505 audit(1293664958.856:13): operation="profile_load" pid=971 name="/usr/bin/evince-previewer"
[ 35.101436] type=1505 audit(1293664958.868:14): operation="profile_load" pid=971 name="/usr/bin/evince-thumbnailer"
[ 35.107608] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[ 35.179659] Registered led device: iwl-phy0::radio
[ 35.179730] Registered led device: iwl-phy0::assoc
[ 35.179758] Registered led device: iwl-phy0::RX
[ 35.179786] Registered led device: iwl-phy0::TX
[ 35.193125] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.214431] r8169: eth0: link down
[ 35.214751] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.777990] /dev/vmmon[1088]: Module vmmon: registered with major=10 minor=165
[ 35.778001] /dev/vmmon[1088]: Module vmmon: initialized
[ 35.821150] /dev/vmci[1096]: VMCI: Driver initialized.
[ 35.821358] /dev/vmci[1096]: Module vmci: registered with major=10 minor=55
[ 35.821363] /dev/vmci[1096]: Module vmci: initialized
[ 35.839843] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 35.839852] NVRM: rm_init_adapter(0) failed
[ 35.842074] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 35.842082] NVRM: rm_init_adapter(0) failed
[ 36.193900] ppdev: user-space parallel port driver
[ 36.398772] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.398780] NVRM: rm_init_adapter(0) failed
[ 36.400753] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.400760] NVRM: rm_init_adapter(0) failed
[ 36.597889] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.597897] NVRM: rm_init_adapter(0) failed
[ 36.599843] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.599850] NVRM: rm_init_adapter(0) failed
[ 36.797116] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.797124] NVRM: rm_init_adapter(0) failed
[ 36.799072] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.799078] NVRM: rm_init_adapter(0) failed
[ 36.994859] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.994867] NVRM: rm_init_adapter(0) failed
[ 36.996816] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 36.996822] NVRM: rm_init_adapter(0) failed
[ 37.044441] /dev/vmnet: open called by PID 1192 (vmnet-dhcpd)
[ 37.044452] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 37.044488] /dev/vmnet: port on hub 1 successfully opened
[ 37.071570] /dev/vmnet: open called by PID 1194 (vmnet-netifup)
[ 37.071589] /dev/vmnet: port on hub 1 successfully opened
[ 37.158110] /dev/vmnet: open called by PID 1203 (vmnet-dhcpd)
[ 37.158123] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 37.158160] /dev/vmnet: port on hub 8 successfully opened
[ 37.199863] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 37.199871] NVRM: rm_init_adapter(0) failed
[ 37.202049] NVRM: RmInitAdapter failed! (0x23:0xffffffff:666)
[ 37.202056] NVRM: rm_init_adapter(0) failed
[ 37.260272] /dev/vmnet: open called by PID 1208 (vmnet-natd)
[ 37.260290] /dev/vmnet: port on hub 8 successfully opened
[ 37.264639] /dev/vmnet: open called by PID 1209 (vmnet-netifup)
[ 37.264658] /dev/vmnet: port on hub 8 successfully opened
[ 37.545495] RPC: Registered udp transport module.
[ 37.545500] RPC: Registered tcp transport module.
[ 37.545504] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 37.585959] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 37.682428] svc: failed to register lockdv1 RPC service (errno 97).
[ 37.683948] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 37.696133] NFSD: starting 90-second grace period
[ 37.856792] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 37.856798] vboxdrv: Successfully done.
[ 37.856801] vboxdrv: Found 2 processor cores.
[ 37.857548] vboxdrv: fAsync=0 offMin=0x2c6 offMax=0xb7c
[ 37.858284] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 37.858289] vboxdrv: Successfully loaded version 3.1.6 (interface 0x00100001).
[ 38.166054] Bluetooth: L2CAP ver 2.14
[ 38.166058] Bluetooth: L2CAP socket layer initialized
[ 38.180487] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.180493] Bluetooth: BNEP filters: protocol multicast
[ 38.200953] Bridge firewalling registered
[ 38.227549] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.227554] Bluetooth: SCO socket layer initialized
[ 38.516004] Bluetooth: RFCOMM TTY layer initialized
[ 38.516012] Bluetooth: RFCOMM socket layer initialized
[ 38.516015] Bluetooth: RFCOMM ver 1.11
[ 45.473884] wlan0: direct probe to AP 00:21:29:99:4f:73 (try 1)
[ 45.473932] wlan0: deauthenticating from 00:21:29:99:4f:73 by local choice (reason=3)
[ 45.473978] wlan0: direct probe to AP 00:21:29:99:4f:73 (try 1)
[ 45.476420] wlan0: direct probe responded
[ 45.476426] wlan0: authenticate with AP 00:21:29:99:4f:73 (try 1)
[ 45.481192] wlan0: authenticated
[ 45.481254] wlan0: associate with AP 00:21:29:99:4f:73 (try 1)
[ 45.482773] wlan0: RX AssocResp from 00:21:29:99:4f:73 (capab=0x431 status=0 aid=1)
[ 45.482778] wlan0: associated
[ 45.484437] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 46.486044] padlock: VIA PadLock not detected.
[ 46.499917] /dev/vmnet: open called by PID 1167 (vmnet-bridge)
[ 46.499935] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 46.499970] /dev/vmnet: port on hub 0 successfully opened
[ 46.499997] bridge-wlan0: is a Wireless Adapter
[ 46.500030] bridge-wlan0: up
[ 46.500035] bridge-wlan0: attached
[ 47.648091] vmnet1: no IPv6 routers present
[ 48.244111] vmnet8: no IPv6 routers present
[ 56.312031] wlan0: no IPv6 routers present