929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Hallo, wie sieht die Ausgabe von dmesg | grep -i dvb jetzt aus? Kommt da noch was? Wenn ja dann
sudo apt-get install --reinstall linux-headers-$(uname -r) linux-image-$(uname -r) linux-image-extra-$(uname -r)
sudo reboot
dann weiter mit wenn noch nicht gemacht
sudo apt-get install libproc-processtable-perl subversion mercurial linux-headers-$(uname -r) build-essential git
dann
git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install
sudo reboot
überprüfen mit
dmesg | grep -i dvb
Die Treiber die du benötigst werden so auf jeden Fall erstellt. Ob die Karte damit läuft konnte ich allerdings nicht testen, da ich sie ja nicht habe.
|
johno
Anmeldungsdatum: 9. Januar 2015
Beiträge: 22
|
Hallo 929RR, vielen herzlichen Dank! Die Technisat Skystar HD2 PCI-Karte läuft! Es funktioniert einwandfrei mit allen möglichen Programmen (kaffeine, w_scan + VLC, vdr + VLC)! Ganz große Klasse!!☺ Viele Grüße, johno
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Rein aus Interesse wie bist du vorgegeangen nach der letzten Anleitung oder der Media Build aus dem Ordner oder ganz anders? Nach einem Kernel update musst du dann diese Schritte ausführen
cd media_build
make clean
make unapply-patches
make
sudo make install
LG und viel Spass mit der Karte.
|
johno
Anmeldungsdatum: 9. Januar 2015
Beiträge: 22
|
danke nochmals! Ich bin exact so vorgegangen, wie du es oben beschrieben hast. ☺ 929RR schrieb: git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install
sudo reboot
überprüfen mit
dmesg | grep -i dvb
Die Treiber die du benötigst werden so auf jeden Fall erstellt. Ob die Karte damit läuft konnte ich allerdings nicht testen, da ich sie ja nicht habe.
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
Hallo an das Forum ich hänge mein Problem mal an, weil ich den hier beschriebenen Weg nachvollzogen habe, meine Skystar S2 auch erkannt wird, aber noch nicht funktioniert. Ich hoffe, dass ich das mit den findigen Helfern dieses Forums noch hinbekomme. Zunächst die Ausgabe von dmesg | grep -i dvb
~ $ dmesg | grep -i dvb
[ 6.176710] dvb_core: module verification failed: signature and/or required key missing - tainting kernel
[ 6.238654] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.566124] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 6.578632] b2c2_flexcop_pci 0000:05:05.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 6.578797] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 8.187646] Modules linked in: usblp isl6421(OX) cx24120(OX) mt312(OX) stv0297(OX) bcm3510(OX) lgdt330x(OX) nxt200x(OX) mt352(OX) snd_hda_codec_hdmi snd_hda_codec_via dm_multipath kvm snd_hda_intel snd_hda_codec snd_hwdep scsi_dh snd_pcm snd_page_alloc stv0299(OX) snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device b2c2_flexcop_pci(OX) serio_raw snd_timer b2c2_flexcop(OX) s5h1420(OX) cx24113(OX) cx24123(OX) dvb_core(OX) k10temp snd sp5100_tco i2c_piix4 soundcore binfmt_misc asus_atk0110 parport_pc mac_hid shpchp ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid pata_acpi usb_storage radeon psmouse pata_atiixp r8169 i2c_algo_bit ttm mii drm_kms_helper wmi drm ahci libahci
Hier noch betreffende Zeilen aus /var/log/dmesg
[ 6.205292] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 6.220237] flexcop-pci: will use the HW PID filter.
[ 6.220240] flexcop-pci: card revision 2
[ 6.238654] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.259504] b2c2-flexcop: MAC address = 00:08:c9:e1:c8:91
[ 6.259880] CX24123: wrong demod revision: d9
...
...
...
[ 6.566124] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 6.566254] cx24120: Demod cx24120 rev. 0x07 detected.
[ 6.566255] cx24120: Conexant cx24120/cx24118 attached.
[ 6.578624] b2c2-flexcop: ISL6421 successfully attached.
[ 6.578628] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[ 6.578632] b2c2_flexcop_pci 0000:05:05.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 6.578797] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Ich weiß an dieser Stelle nicht weiter und wäre dankbar für eure Hilfe viele Grüße Gottfried
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Hallo, für Kernel 3.13, 3.16, 3.19 kannst du die DKMS Pakete verwenden. Ab Kernel 4.2 brauchst du nur noch die Firmware. Läuft dann "Out of the box". https://forum.ubuntuusers.de/topic/treiberinstallation-skystar-s2-pci/7/#post-7542883 LG
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
Hallo, @929RR - vielen Dank für die schnelle Antwort ich habe wie dort beschrieben media_build entfernt, das dkms Paket reinstalliert und dein .deb Paket für Kernel 3.13 installiert. Irgendwas hakt aber noch, im VLC rührt sich nichts. Hier noch mal die Ausgabe von dmesg | grep -i dvb : [ 6.379506] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.410119] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 6.410250] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner ATTACHED.
[ 6.437698] b2c2_flexcop_pci 0000:05:05.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 6.437829] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 8.275067] Modules linked in: usblp snd_hda_codec_hdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm kvm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq serio_raw snd_seq_device snd_timer k10temp isl6421 dm_multipath scsi_dh cx24120(OX) b2c2_flexcop_pci(OX) b2c2_flexcop(OX) s5h1420 cx24113 sp5100_tco cx24123 dvb_core i2c_piix4 snd soundcore shpchp asus_atk0110 binfmt_misc parport_pc ppdev lp parport mac_hid dm_mirror dm_region_hash dm_log hid_generic usbhid hid usb_storage pata_acpi pata_atiixp radeon r8169 psmouse i2c_algo_bit ttm mii drm_kms_helper wmi drm ahci libahci und die betreffenden Zeilen aus lsmod
cx24120 28655 1
b2c2_flexcop_pci 18719 0
b2c2_flexcop 30265 1 b2c2_flexcop_pci
s5h1420 18128 1 b2c2_flexcop
cx24113 17557 1 b2c2_flexcop
sp5100_tco 13643 0
cx24123 18611 1 b2c2_flexcop
dvb_core 101206 1 b2c2_flexcop ich hab die Module cx24113 und cx24123 schon mal in die /etc/modprobe.d/blacklist.conf reingeschrieben, trotzdem tauchten sie wieder auf.
Was kann ich noch machen? lg gottfried
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Die Module cx24113 und cx24123 werden benötigt, mach mal
sudo apt-get remove cx24120-dkms
sudo apt-get install --reinstall linux-headers-$(uname -r) linux-image-$(uname -r) linux-image-extra-$(uname -r)
und dann die Ausgabe von
dmesg | grep -i 'dvb\|b2c2\|24120'
und
uname -r
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
hallo 929RR ich habe es ausgeführt, (leider hat sich nichts geändert), Kommando zurück, ich schicke die Ausgabe immer in eine Datei und hatte die alte erwischt, hier nun dmesg | grep -i 'dvb\|b2c2:\|24120' [ 6.417694] b2c2_flexcop: module verification failed: signature and/or required key missing - tainting kernel
[ 6.417977] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 6.445669] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.464394] b2c2-flexcop: MAC address = 00:08:c9:e1:c8:91
[ 6.481377] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 6.481382] CX24120: cx24120_attach: -> Driver version: 'SVT - 0.0.4a 03.04.2012'
[ 6.481509] CX24120: cx24120_attach: -> Demod CX24120 rev. 0x07 detected.
[ 6.481510] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner ATTACHED.
[ 6.492864] b2c2-flexcop: ISL6421 successfully attached.
[ 6.492868] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[ 6.492873] b2c2_flexcop_pci 0000:05:05.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 6.492940] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 8.120516] Modules linked in: usblp isl6421 cx24120(OX) b2c2_flexcop_pci(OX) b2c2_flexcop(OX) s5h1420 cx24113 cx24123 dvb_core kvm serio_raw k10temp dm_multipath scsi_dh sp5100_tco snd_hda_codec_hdmi snd_hda_codec_via i2c_piix4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore shpchp binfmt_misc asus_atk0110 parport_pc mac_hid ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid pata_acpi usb_storage radeon psmouse i2c_algo_bit ttm pata_atiixp drm_kms_helper r8169 wmi mii drm ahci libahci
uname -r 3.13.0-37-generic VLC meldet absolut nichts, wenn ich die xpsf mit den Sendern öffne, zeigt sie nur in der Wiedergabeliste an. gottfried
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Was hast du denn gemacht? Wenn du das so ausführst, wie ich es oben geschrieben habe, darf nach dem Befehl
dmesg | grep -i 'dvb\|b2c2\|24120'
nichts mehr im Terminal stehen. Habe allerdings den reboot vergessen. Also nach ausführen der Befehle
sudo apt-get remove cx24120-dkms
und
sudo apt-get install --reinstall linux-headers-$(uname -r) linux-image-$(uname -r) linux-image-extra-$(uname -r)
sudo reboot
und dann die Ausgabe von
dmesg | grep -i 'dvb\|b2c2\|24120'
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
hallo 929RR ich habe es wiederholt, mit reboot. dmesg | grep -i 'dvb\|b2c2\|24120' bringt jetzt das: [ 6.240237] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 6.403026] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.404907] b2c2-flexcop: MAC address = 00:08:c9:e1:c8:91
[ 6.850108] b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
[ 6.944007] systemd-udevd[451]: Failed to apply ACL on /dev/dvb/adapter0/demux0: No such file or directory
[ 6.945522] systemd-udevd[452]: Failed to apply ACL on /dev/dvb/adapter0/dvr0: No such file or directory
[ 6.953626] systemd-udevd[453]: Failed to apply ACL on /dev/dvb/adapter0/net0: No such file or directory
[ 8.176264] Modules linked in: usblp mt312 stv0297 bcm3510 lgdt330x nxt200x mt352 snd_hda_codec_hdmi snd_hda_codec_via stv0299 snd_hda_intel b2c2_flexcop_pci snd_hda_codec snd_hwdep kvm snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event b2c2_flexcop snd_rawmidi s5h1420 snd_seq dm_multipath scsi_dh cx24113 snd_seq_device serio_raw cx24123 snd_timer k10temp dvb_core snd sp5100_tco i2c_piix4 soundcore asus_atk0110 shpchp binfmt_misc mac_hid parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid pata_acpi usb_storage radeon psmouse pata_atiixp r8169 i2c_algo_bit mii ttm drm_kms_helper wmi drm ahci libahci
gottfried
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Das sieht alles normal aus, bis auf die untere Zeile mit den Modulen. Weiß nicht warum die angezeigt wird. mach mal
sudo apt-get install libproc-processtable-perl subversion mercurial linux-headers-$(uname -r) build-essential w-scan
wget https://www.dropbox.com/sh/ebkn8u532ri1qwa/AAB-rgRYn2k8fhIg73h2kwOca/SkyStar_S2_cx24120-dkms_3.13_all.deb
sudo dpkg -i SkyStar_S2_cx24120-dkms_3.13_all.deb
sudo reboot
und dann mal einen Sendersuchlauf testen.
w_scan -fs -s S19E2 >> channels.conf
Wie lange hast du das System den schon drauf? Hast du schon mal ein upgrade und dist-upgrade gemacht? der aktuelle 3.13er Kernel ist 3.13.0-66
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
hallo 929RR, alles gemacht: w_scan läuft noch, zeigt aber überall -no signal- VLC bringt jetzt nach Aufruf eine Fehlermeldung:
The selected digital tuner does not support the specified parameters.
Please check the preferences. Ein dist-upgrade habe ich noch nicht gemacht. Der Sat-Empfang lief bis vor ca. 2 Wochen, dann hat die verbaute Terratec Karte den Geist aufgegeben. Ich hab gelesen, dass ich mit dem Terratec-Ausfall nicht der Einzige bin und hab deshalb die Skystar gekauft. Inzwischen ist w_scan durch, die channels.conf ist leer. Leider noch nicht am Ziel.
Ich danke dir und hoffe, du hast noch Geduld. gottfried
|
929RR
Anmeldungsdatum: 29. Dezember 2014
Beiträge: 149
|
Dann nochmal die Ausgabe von
dmesg | grep -i 'dvb\|b2c2\|24120'
|
egottfried
Anmeldungsdatum: 26. Oktober 2015
Beiträge: 13
|
hallo, sieht unverändert aus
[ 6.585706] b2c2_flexcop: module verification failed: signature and/or required key missing - tainting kernel
[ 6.586089] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 6.601778] DVB: registering new adapter (FlexCop Digital TV device)
[ 6.603300] b2c2-flexcop: MAC address = 00:08:c9:e1:c8:91
[ 6.620588] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 6.620593] CX24120: cx24120_attach: -> Driver version: 'SVT - 0.0.4a 03.04.2012'
[ 6.620720] CX24120: cx24120_attach: -> Demod CX24120 rev. 0x07 detected.
[ 6.620721] CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner ATTACHED.
[ 6.634080] b2c2-flexcop: ISL6421 successfully attached.
[ 6.634083] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[ 6.634087] b2c2_flexcop_pci 0000:05:05.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 6.634128] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 8.271545] Modules linked in: usblp snd_hda_codec_hdmi snd_seq_midi isl6421 snd_seq_midi_event cx24120(OX) b2c2_flexcop_pci(OX) b2c2_flexcop(OX) s5h1420 kvm cx24113 cx24123 snd_rawmidi snd_hda_codec_via serio_raw snd_hda_intel snd_hda_codec dvb_core snd_hwdep k10temp dm_multipath snd_pcm scsi_dh snd_page_alloc sp5100_tco snd_seq i2c_piix4 snd_seq_device snd_timer snd soundcore shpchp binfmt_misc asus_atk0110 parport_pc mac_hid ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid pata_acpi usb_storage radeon psmouse pata_atiixp r8169 mii i2c_algo_bit ttm ahci libahci drm_kms_helper drm wmi
|