ubuntuusers.de

Forum

Dualview

Alle Foren als gelesen markieren
ubuntuusers.de › Forum › Rund ums Wiki › Dualview

Dualview

Status: Ungelöst | Ubuntu-Version: Ubuntu 8.04 (Hardy Heron)
Antworten |
Dieses Thema ist die Diskussion des Artikels Dualview.

Nagian

Anmeldungsdatum:
Mai 30, 2006

Beiträge: 54

Wohnort: Altach
Zitieren
Beitrag 14. September 2008 15:33

In dem Artikel heißt es dass man mit folgendem Befehl: 

sudo aticonfig --initial=dual-head --screen-layout=right

zwei unabhängige Desktops konfigurieren kann.

Weiter oben steht noch beschrieben dass bei zwei unabhängigen Desktops die 3d-Beschleunigung auch noch funktioniert. Sollte doch eigentlich heißen das nachher auch noch die Effekte funktionieren sollten, die man unter System->Einstellungen->Erscheinungsbild->visuelle Effekte eingestellt hat funktionieren sollten, ist aber bei mir nicht der Fall.

Liegt das an mir oder ist der Artikel falsch?

e2b Team-Icon

Avatar von e2b

Anmeldungsdatum:
Mai 6, 2006

Beiträge: 3397
Zitieren
Beitrag 14. September 2008 17:10

So wie es aussieht, wird deine xorg.conf neu geschrieben, oder? In dem Fall gehen evtl. Zeilen bzgl. ATI+Compiz verloren.

Ich habe z.B. die Zeile 

Section "Module"
	Load		"glx"
EndSection

die, soweit ich weiß, für Compiz zwingend notwendig ist.

Nagian

(Themenstarter)

Anmeldungsdatum:
Mai 30, 2006

Beiträge: 54

Wohnort: Altach
Zitieren
Beitrag 20. September 2008 19:52

Die xorg.conf wird neugeschrieben, aber die drei Zeilen die du hier aufgelistet hast stehen immer noch drin. Das kann also nicht das Problem sein.

Mir fällt auch noch auf dass auf dem Zweitbildschirm die Bilder sehr langsam aufgebaut werden. Ich post euch hier mal meine xorg.conf:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	Screen         "aticonfig-Screen[1]" RightOf "Default Screen"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "de"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizEdgeScroll" "0"
EndSection

Section "Monitor"
	Identifier   "Configured Monitor"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[1]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Configured Video Device"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[1]"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "Configured Video Device"
	Monitor    "Configured Monitor"
	DefaultDepth     24
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[1]"
	Device     "aticonfig-Device[1]"
	Monitor    "aticonfig-Monitor[1]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

e2b Team-Icon

Avatar von e2b

Anmeldungsdatum:
Mai 6, 2006

Beiträge: 3397
Zitieren
Beitrag 21. September 2008 14:36

Schon probiert, ob die 3D-Beschleunigung überhaupt an ist? 

glxinfo | grep rendering 
glxgears

Das einzige was mir sonst noch einfällt ist, dass du mal die Ubuntu-Live-CD einlegen könntest, schaust ob dort alles funktioniert und vergleiche die die xorg.conf-Dateien miteinander. Ich bin aber kein Experte auf dem Gebiet.

BigMc Team-Icon

Avatar von BigMc

Anmeldungsdatum:
März 18, 2007

Beiträge: 1763

Wohnort: Hamburg
Zitieren
Beitrag 7. November 2008 12:14

Ich hab Tips zum Umgang mit unabhängigen Desktops ergänzt.

noisefloor Team-Icon

Wikiteam
Avatar von noisefloor

Anmeldungsdatum:
Juni 6, 2006

Beiträge: 13977

Wohnort: Görgeshausen
Zitieren
Beitrag 7. November 2008 15:56

Hallo,

funktioniert das unter Intrepid überhaupt noch so, wegen dem selbstkonfigurierenden X-Server. Das ist die xorg.conf ja nicht mehr wirklich nötig...

Gruß, noisefloor

BigMc Team-Icon

Avatar von BigMc

Anmeldungsdatum:
März 18, 2007

Beiträge: 1763

Wohnort: Hamburg
Zitieren
Beitrag 7. November 2008 16:25

Ich hab für Intrepid einfach wieder meine alte xorg.conf für 2 Xserver von Gutsy genommen und es funktioniert einwandfrei. Das neue Problem ist ja, eine xorg.conf in der was drinsteht als Ausgangspunkt zu bekommen. Aber "NVIDIA X Server Settings" schreibt ja z.B. noch eine xorg.conf mit den Einstellungen. Das wär eine Möglichkeit für Nvidia-Karten-Besitzer.

sudo dpkg-reconfigure -phigh xserver-xorg

könnte man auch mal ausprobieren. So viel Ahnung hab ich allerdings auch nicht von der Problematik, dass ich jetzt einfach in den Artikel schreiben würde, man soll sich ne old-style xorg-conf machen...

Dosenelepfand

Anmeldungsdatum:
Jan. 19, 2009

Beiträge: 8
Zitieren
Beitrag 8. Februar 2009 09:36

Im wiki-Artikel zum Thema DualView http://wiki.ubuntuusers.de/Dualview wird für alte Ubuntu-Versionen noch erklärt, wie man zwei Bildschirme mit jeweils einem XServer konfiguriert. Für aktuelle Versionen fehlt eine solche Erklärung, da nur auf RandR verwiesen wird und dieser stets zwei Bildschirme zu einem großen zusammenklebt. Ich würde mich freuen, wenn jemand dort erklären könnte, wie man auch unter aktuellen Versionen getrennte XServer einrichten kann (falls das geht - ich kenne mich nicht aus).

Moderiert von BigMc:

An die Diskussion angehägt.

mgraesslin Team-Icon

Avatar von mgraesslin

Anmeldungsdatum:
Nov. 8, 2006

Beiträge: 8725

Wohnort: Mannheim
Zitieren
Beitrag 8. Februar 2009 10:20

was bei dem Artikel etwas unglücklich ist: All die "alten" Methoden funktionieren immer noch. Nur seit 7.10 gibt es mit RandR ein besseres Tool.

BigMc Team-Icon

Avatar von BigMc

Anmeldungsdatum:
März 18, 2007

Beiträge: 1763

Wohnort: Hamburg
Zitieren
Beitrag 8. Februar 2009 11:01

Wenn RandR keine zwei XServer "kann", können wir den Teil nicht einfach unter "bis Feisty" belassen. Dosenelepfand, wieso probierst du nicht einfach den Abschnitt unter "bis Feisty" und evtl. meine Vorschläge oben und berichtest dann, ob das noch funktioniert? Dann sehen wir mal, was wir mit dem Artikel machen.

Gruß, BigMc

Dosenelepfand

Anmeldungsdatum:
Jan. 19, 2009

Beiträge: 8
Zitieren
Beitrag 8. Februar 2009 16:47

Wenn ich "Screen 0" und "Screen 1" eintrage, startet der X-Server nicht mehr. Anderenfalls startet er, jedoch habe ich dann zwei synchronisierte Bildschirme, wobei der Externe Monitor flackert und sehr unscharf ist. Für den Fall, dass ich die Screen 0 und Screen 1 Optionen hinzunehme, ist es unerheblich, ob ich intel oder den älteren i810 als Treiber wähle. Log: 

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux hanno 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
Build Date: 09 January 2009  02:57:16AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb  8 16:28:47 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(**) RgbPath set to "/etc/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
 
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,01b5 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2592 card 1028,01b5 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2792 card 1028,01b5 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,2668 card 1028,01b5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,01b5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,01b5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,01b5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,01b5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,01b5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,01b5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,01b5 rev 03 class 01,01,80 hdr 00
(II) PCI: 02:00:0: chip 14e4,170c card 1028,01b5 rev 02 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 1180,0832 card 1028,01b5 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:01:1: chip 1180,0822 card 1028,01b5 rev 19 class 08,05,01 hdr 80
(II) PCI: 02:01:2: chip 1180,0592 card 1028,01b5 rev 0a class 08,80,00 hdr 80
(II) PCI: 02:01:3: chip 1180,0852 card 1028,01b5 rev 05 class 08,80,00 hdr 80
(II) PCI: 02:03:0: chip 8086,4220 card 8086,2722 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:1), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 12 non-prefetchable memory range:
	[0] -1	0	0xdfc00000 - 0xdfdfffff (0x200000) MX[B]
(II) Bus 12 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xd01fffff (0x200000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xdfb00000 - 0xdfbfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff00000/19, 0xc0000000/28, 0xdfec0000/18, I/O @ 0xeff8/3
(--) PCI: (0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff80000/19
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[1] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[2] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[3] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[4] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[5] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[6] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[7] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[8] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[9] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[12] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[13] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[14] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[15] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[18] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[20] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[21] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[1] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[2] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[3] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[4] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[5] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[6] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[7] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[8] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[9] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[12] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[13] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[14] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[15] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[17] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[18] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[19] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[20] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[21] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[5] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[6] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[7] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[8] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[9] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[11] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[12] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[13] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[20] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[24] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[25] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[26] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[27] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.3.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(--) Chipset 915GM found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[5] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[6] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[7] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[8] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[9] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[11] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[12] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[13] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[20] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[24] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[25] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[26] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[27] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[5] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[6] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[7] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[8] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[9] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[11] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[12] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[13] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[22] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[23] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[24] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[26] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[27] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[28] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[29] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[30] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
	[31] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[32] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV using monitor section TV
(**) intel(0): Option "Ignore" "True"
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "TAR", prod id 41364
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline "1152x864"x74.8  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): Modeline "256x144"x55.4    2.75  256 264 288 320  144 147 152 155 -hsync +vsync (8.6 kHz)
(II) intel(0): EDID vendor "TAR", prod id 41364
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output VGA using initial mode 1280x800
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (106, 135)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/lib/xorg/modules//libvgahw.so
(==) intel(1): Depth 24, (--) framebuffer bpp 32
(==) intel(1): RGB weight 888
(==) intel(1): Default visual is TrueColor
(II) intel(1): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(1): Chipset: "915GM"
(--) intel(1): Linear framebuffer at 0xC0000000
(--) intel(1): IO registers at addr 0xDFF00000
(II) intel(1): 2 display pipes available.
(==) intel(1): Using EXA for acceleration
(==) intel(1): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(1): Output VGA using monitor section monitor1
(II) intel(1): I2C bus "CRTDDC_A" initialized.
(II) intel(1): Output LVDS has no monitor section
(II) intel(1): I2C bus "LVDSDDC_C" initialized.
(II) intel(1): Attempting to determine panel fixed mode.
(II) intel(1): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "LPL", prod id 0
(II) intel(1):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(1): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(1): No SDVO device found on SDVOB
(II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(1): No SDVO device found on SDVOC
(II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(1): Output TV using monitor section TV
(II) intel(1): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "TAR", prod id 41364
(II) intel(1): Using EDID range info for horizontal sync
(II) intel(1): Using EDID range info for vertical refresh
(II) intel(1): Printing DDC gathered Modelines:
(II) intel(1): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(1): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(1): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(1): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(1): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(1): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(1): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(1): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(1): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(1): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(1): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(1): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(1): Modeline "1152x864"x74.8  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(1): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(1): Modeline "256x144"x55.4    2.75  256 264 288 320  144 147 152 155 -hsync +vsync (8.6 kHz)
(II) intel(1): EDID vendor "TAR", prod id 41364
(II) intel(1): EDID vendor "LPL", prod id 0
(II) intel(1):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(1): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(1): Output VGA connected
(II) intel(1): Output LVDS connected
(II) intel(1): Output VGA using initial mode 1280x1024
(II) intel(1): Output LVDS using initial mode 1280x800
(II) intel(1): Monitoring connected displays enabled
(II) intel(1): detected 256 kB GTT.
(II) intel(1): detected 7932 kB stolen memory.
(==) intel(1): video overlay key set to 0x101fe
(==) intel(1): Will not try to enable page flipping
(==) intel(1): Triple buffering disabled
(==) intel(1): Intel XvMC decoder disabled
(==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
(--) intel(1): Using HW Cursor because it's enabled on primary head.
(**) intel(1): Display dimensions: (380, 300) mm
(**) intel(1): DPI set to (106, 135)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/lib/xorg/modules//libfb.so
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Reloading /usr/lib/xorg/modules//libexa.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(1): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  Yes, I do.
(II) resource ranges after preInit:
	[0] 0	0	0xdfec0000 - 0xdfefffff (0x40000) MS[B]
	[1] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MS[B]
	[2] 0	0	0xdff00000 - 0xdff7ffff (0x80000) MS[B]
	[3] 0	0	0xdfec0000 - 0xdfefffff (0x40000) MS[B]
	[4] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MS[B]
	[5] 0	0	0xdff00000 - 0xdff7ffff (0x80000) MS[B]
	[6] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[7] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[8] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[9] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[10] -1	0	0xdfbfd000 - 0xdfbfdfff (0x1000) MX[B]
	[11] -1	0	0xdfbfc700 - 0xdfbfc7ff (0x100) MX[B]
	[12] -1	0	0xdfbfc600 - 0xdfbfc6ff (0x100) MX[B]
	[13] -1	0	0xdfbfc500 - 0xdfbfc5ff (0x100) MX[B]
	[14] -1	0	0xdfbfc800 - 0xdfbfcfff (0x800) MX[B]
	[15] -1	0	0xdfbfe000 - 0xdfbfffff (0x2000) MX[B]
	[16] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
	[17] -1	0	0xdfebc000 - 0xdfebffff (0x4000) MX[B]
	[18] -1	0	0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
	[19] -1	0	0xdfec0000 - 0xdfefffff (0x40000) MX[B](B)
	[20] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[21] -1	0	0xdff00000 - 0xdff7ffff (0x80000) MX[B](B)
	[22] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[23] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[24] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[25] 0	0	0x0000eff8 - 0x0000efff (0x8) IS[B]
	[26] 0	0	0x0000eff8 - 0x0000efff (0x8) IS[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[29] -1	0	0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
	[30] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[31] -1	0	0x00000170 - 0x00000177 (0x8) IX[B]
	[32] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[33] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[34] -1	0	0x0000bf20 - 0x0000bf3f (0x20) IX[B]
	[35] -1	0	0x0000bf40 - 0x0000bf5f (0x20) IX[B]
	[36] -1	0	0x0000bf60 - 0x0000bf7f (0x20) IX[B]
	[37] -1	0	0x0000bf80 - 0x0000bf9f (0x20) IX[B]
	[38] -1	0	0x0000eff8 - 0x0000efff (0x8) IX[B](B)
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
 
Backtrace:
0: /usr/bin/X11/X(xf86SigHandler+0x7e) [0x80c91ce]
1: [0xb7fdd400]
2: /usr/lib/xorg/modules/drivers//i810_drv.so [0xb7ba36d6]
3: /usr/lib/xorg/modules/drivers//i810_drv.so(i830_allocate_2d_memory+0x184) [0xb7ba3964]
4: /usr/lib/xorg/modules/drivers//i810_drv.so [0xb7b98090]
5: /usr/lib/xorg/modules/drivers//i810_drv.so [0xb7b9d82d]
6: /usr/bin/X11/X(AddScreen+0x1f7) [0x8073db7]
7: /usr/bin/X11/X(InitOutput+0x236) [0x80aac26]
8: /usr/bin/X11/X(main+0x2b1) [0x8074591]
9: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7d94455]
10: /usr/bin/X11/X(FontFileCompleteXLFD+0x21d) [0x8073a81]
 
Fatal server error:
Caught signal 11.  Server aborting

Xorg.conf

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen	    1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "extmod"
	Load  "glx"
	Load  "dbe"
	Load  "record"
	Load  "dri"
	Load  "xtrap"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option "CoreKeyboard"
	Option "XkbRules" "xorg"
	Option "XkbModel" "pc105"
	Option "XkbLayout" "de"
	Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "monitor0"
#	VendorName   "TAR"
#	ModelName    "LCD19-4"

	Option	    "DPMS"
EndSection

Section	"Monitor"
	Identifier	"monitor1"
	
	Option "DPMS"
EndSection

Section "Monitor"
	Identifier    "TV"
	Option	      "Ignore"	"True"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "i810"
	VendorName  "Intel Corporation"
	BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
	BusID       "PCI:0:2:0"	

	Screen 0
EndSection

Section "Device"
	Identifier	"Card1"
	Driver		"i810"
	VendorName	"Intel  Corporation"
	BusID		"PCI:0:2:0"
	
	Screen 1
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "monitor0"
        SubSection "Display"
                Depth     24
		Modes	  "1280x800"
        EndSubSection
EndSection

Section	"Screen"
	Identifier "Screen1"
	Device	    "Card1"
	Monitor     "monitor1"
	SubSection	"Display"
		Depth 24
		Modes	"1280x1024"
	EndSubSection
EndSection

Wird jemand daraus schlau?

BigMc Team-Icon

Avatar von BigMc

Anmeldungsdatum:
März 18, 2007

Beiträge: 1763

Wohnort: Hamburg
Zitieren
Beitrag 8. Februar 2009 21:34

Mhh, wo hast du die xorg.conf her, die du als Ausgangspunkt genommen hast?

Gruß, BigMc

Dosenelepfand

Anmeldungsdatum:
Jan. 19, 2009

Beiträge: 8
Zitieren
Beitrag 8. Februar 2009 23:37

Sorry, ich hatte das vorhin bei Debian ausprobiert, manche Teile der xorg.conf waren noch von dort automatisch generiert. Nun nochmal eine abgespeckte xorg.conf aus Ubuntu Intrepid und die resultierende, im Wesentlichen gleiche log-datei:

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux hanno-laptop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb  8 23:28:00 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff00000/0, 0xc0000000/0, 0xdfec0000/0, I/O @ 0x0000eff8/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff80000/0
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.99.905, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.99.905, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Output TV using monitor section TV
(**) intel(0): Option "Ignore" "True"
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "TAR", prod id 41364
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz)
(II) intel(0): Modeline "256x144"x60.0    2.16  256 232 248 240  144 145 148 150 -hsync +vsync (9.0 kHz)
(II) intel(0): EDID vendor "TAR", prod id 41364
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1360x768
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (106, 135)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Reloading /usr/lib/xorg/modules//libvgahw.so
(==) intel(1): Depth 24, (==) framebuffer bpp 32
(==) intel(1): RGB weight 888
(==) intel(1): Default visual is TrueColor
(II) intel(1): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(1): Chipset: "915GM"
(--) intel(1): Linear framebuffer at 0xC0000000
(--) intel(1): IO registers at addr 0xDFF00000
(II) intel(1): 2 display pipes available.
(==) intel(1): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(1): Output VGA using monitor section monitor1
(II) intel(1): I2C bus "CRTDDC_A" initialized.
(II) intel(1): Output LVDS has no monitor section
(II) intel(1): I2C bus "LVDSDDC_C" initialized.
(II) intel(1): Attempting to determine panel fixed mode.
(II) intel(1): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "LPL", prod id 0
(II) intel(1):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(1): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(1): Output TV using monitor section TV
(II) intel(1): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(1): EDID vendor "TAR", prod id 41364
(II) intel(1): Using EDID range info for horizontal sync
(II) intel(1): Using EDID range info for vertical refresh
(II) intel(1): Printing DDC gathered Modelines:
(II) intel(1): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(1): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(1): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(1): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(1): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(1): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(1): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(1): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(1): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(1): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(1): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(1): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(1): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(1): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(1): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(1): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz)
(II) intel(1): Modeline "256x144"x60.0    2.16  256 232 248 240  144 145 148 150 -hsync +vsync (9.0 kHz)
(II) intel(1): EDID vendor "TAR", prod id 41364
(II) intel(1): EDID vendor "LPL", prod id 0
(II) intel(1):     EDID quirk: Detailed timings give sizes in cm.
(II) intel(1): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(1): Output VGA connected
(II) intel(1): Output LVDS connected
(II) intel(1): Using user preference for initial modes
(II) intel(1): Output VGA using initial mode 1280x1024
(II) intel(1): Output LVDS using initial mode 1280x800
(II) intel(1): Monitoring connected displays enabled
(II) intel(1): detected 256 kB GTT.
(II) intel(1): detected 7932 kB stolen memory.
(==) intel(1): video overlay key set to 0x101fe
(==) intel(1): Will not try to enable page flipping
(==) intel(1): Triple buffering disabled
(==) intel(1): Intel XvMC decoder disabled
(==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
(--) intel(1): Using HW Cursor because it's enabled on primary head.
(**) intel(1): Display dimensions: (380, 300) mm
(**) intel(1): DPI set to (106, 135)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Reloading /usr/lib/xorg/modules//libfb.so
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Reloading /usr/lib/xorg/modules//libexa.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(1): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  Yes, I do.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.

Backtrace:
0: /usr/X11R6/bin/X(xf86SigHandler+0x79) [0x80c3009]
1: [0xb7f13400]
2: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb798f45e]
3: /usr/lib/xorg/modules/drivers//intel_drv.so(i830_allocate_2d_memory+0x174) [0xb798f6e4]
4: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7983c60]
5: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb79865a0]
6: /usr/X11R6/bin/X(AddScreen+0x19f) [0x807137f]
7: /usr/X11R6/bin/X(InitOutput+0x206) [0x80aa536]
8: /usr/X11R6/bin/X(main+0x279) [0x8071b19]
9: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7b15685]
10: /usr/X11R6/bin/X [0x8071101]
Saw signal 11.  Server aborting.
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen	    1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option "CoreKeyboard"
	Option "XkbRules" "xorg"
	Option "XkbModel" "pc105"
	Option "XkbLayout" "de"
	Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "monitor0"
#	VendorName   "TAR"
#	ModelName    "LCD19-4"

	Option	    "DPMS"
EndSection

Section	"Monitor"
	Identifier	"monitor1"
	
	Option "DPMS"
EndSection

Section "Monitor"
	Identifier    "TV"
	Option	      "Ignore"	"True"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "intel"
	BusID       "PCI:0:2:0"	

	Screen 0
EndSection

Section "Device"
	Identifier	"Card1"
	Driver		"intel"
	BusID		"PCI:0:2:0"
	
	Screen 1
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "monitor0"
        SubSection "Display"
                Depth     24
		Modes	  "1280x800"
        EndSubSection
EndSection

Section	"Screen"
	Identifier "Screen1"
	Device	    "Card1"
	Monitor     "monitor1"
	SubSection	"Display"
		Depth 24
		Modes	"1280x1024"
	EndSubSection
EndSection

Die entsprechenden Device,Monitor,Screen,Severlayout Sections habe ich versucht aus dem Wiki Artikel zu übernehmen.

Wie sieht denn deine xorg.conf aus?

BigMc Team-Icon

Avatar von BigMc

Anmeldungsdatum:
März 18, 2007

Beiträge: 1763

Wohnort: Hamburg
Zitieren
Beitrag 8. Februar 2009 23:47

Die sieht so aus: 

Section "Monitor"
	Identifier     "Standardbildschirm"
	Option         "DPMS"
EndSection

Section "Monitor"
	Identifier     "Monitor0"
	VendorName     "Unknown"
	ModelName      "QDS"
	HorizSync       30.0 - 75.0
	VertRefresh     60.0
EndSection

Section "Monitor"
	Identifier     "Monitor1"
	VendorName     "Unknown"
	ModelName      "Iiyama PL2202W"
	HorizSync       30.0 - 80.0
	VertRefresh     55.0 - 75.0
EndSection

Section "Screen"
	Identifier     "Default Screen"
	Device         "Standardgrafikkarte"
	Monitor        "Standardbildschirm"
	DefaultDepth	24
	SubSection "Display"
		Modes      "1280x800" "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
	Identifier     "Screen0"
	Device         "Videocard0"
	Monitor        "Monitor0"
	DefaultDepth    24
	Option         "TwinView" "0"
	Option         "metamodes" "DFP: 1280x800 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0"
EndSection

Section "Screen"
	Identifier     "Screen1"
	Device         "Videocard1"
	Monitor        "Monitor1"
	DefaultDepth    24
	Option         "TwinView" "0"
	Option         "metamodes" "CRT: nvidia-auto-select +0+0"
EndSection

Section "Module"
	Load           "glx"
	Load           "v4l"
	Disable	"dri2"
EndSection

Section "InputDevice"
	Identifier     "Generic Keyboard"
	Driver         "kbd"
	Option         "CoreKeyboard"
	Option         "XkbRules" "xorg"
	Option         "XkbModel" "pc105"
	Option         "XkbLayout" "us"
	Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier     "Configured Mouse"
	Driver         "mouse"
	Option         "CorePointer"
	Option         "Device" "/dev/input/mice"
	Option         "Protocol" "ImPS/2"
	Option         "ZAxisMapping" "4 5"
	Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier     "Synaptics Touchpad"
	Driver         "synaptics"
	Option         "SendCoreEvents" "true"
	Option         "Device" "/dev/psaux"
	Option         "Protocol" "auto-dev"
	Option         "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
	Identifier     "stylus"
	Driver         "wacom"
	Option         "Device" "/dev/input/wacom"
	Option         "Type" "stylus"
	Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier     "eraser"
	Driver         "wacom"
	Option         "Device" "/dev/input/wacom"
	Option         "Type" "eraser"
	Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier     "cursor"
	Driver         "wacom"
	Option         "Device" "/dev/input/wacom"
	Option         "Type" "cursor"
	Option         "ForceDevice" "ISDV4"		# Tablet PC ONLY
EndSection

Section "Extensions"
	Option         "Composite" "Enable"
EndSection

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 1680 0
	Screen      1  "Screen1" LeftOf "Screen0"
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Device"
	Identifier     "Standardgrafikkarte"
	Driver         "nvidia"
	Option         "AddARGBVisuals" "True"
	Option         "AddARGBGLXVisuals" "True"
	Option         "NoLogo" "True"
	BusID          "PCI:1:0:0"
EndSection

Section "Device"
	Identifier     "Videocard0"
	VendorName     "NVIDIA Corporation"
	BoardName      "GeForce Go 7400"
	BusID          "PCI:1:0:0"
	Screen          0
	Driver	"nvidia"
	Option	"NoLogo"	"True"
EndSection

Section "Device"
	Identifier     "Videocard1"
	VendorName     "NVIDIA Corporation"
	BoardName      "GeForce Go 7400"
	BusID          "PCI:1:0:0"
	Screen          1
	Driver	"nvidia"
	Option	"NoLogo"	"True"
EndSection

Section "ServerFlags"
	Option         "Xinerama" "0"
EndSection

noisefloor Team-Icon

Wikiteam
Avatar von noisefloor

Anmeldungsdatum:
Juni 6, 2006

Beiträge: 13977

Wohnort: Görgeshausen
Zitieren
Beitrag 9. Februar 2009 20:46

Hallo,

funktioniert nicht unter GNOME "System -> Einstellungen -> Bildschirmauflösung"? Bei mir funktioniert das jedenfalls 1A, wenn ich mal einen Beamer an den 2. Monitorausgang hänge. Ohne Änderungen an der xorg.conf.

Gruß, noisefloor
Antworten |
ubuntuusers.de › Forum › Rund ums Wiki › Dualview
Passwort vergessen?