Hoffentlich bin ich hier richtig! Auf meinem PC waren Ubuntu 9.04 und Windows xp installiert, alles hat prima funktioniert. Nach der Installation von opensuse 11.2 kann ich zwar dieses und Win XP starten nicht aber Ubuntu obwohl es in der Bootliste angezeigt wird. Es erscheint Error 15 "file not found". Welche Änderungen bei Grub (Version 0.97) kann / muß ich wie vornehmen damit alle drei Systeme gebootet werden können? Geht das mit einer Ubuntu 9.04 Live CD?
Error 15 nach Installation von opensuse
|
Anmeldungsdatum: Beiträge: 20 |
|
|
Anmeldungsdatum: Beiträge: 156 |
Hiho crocodeal, aus der Grub-Dokumentation: 15 : File not found
This error is returned if the specified file name cannot be found, but everything else (like the disk/partition info) is OK. Mein Tipp ist daher, dass wahrscheinlich die Partitionen bei der Grub-Config durcheinander gekommen sind. Du kannst im Grub-Menü während dem Booten die Einträge mit der E-Taste bearbeiten. Da müsste in der ersten Zeile etwas wie root (hd0,1) stehen. Dabei zählt Grub immer von 0 an, so dass (hd0,1) auf der ersten Festplatte die zweite Partition bezeichnet. Hast du hier die richtige Einstellung gefunden, musst du das dann nur in der menu.lst ändern ( /boot/grub/menu.lst wahrscheinlich auf der opensuse Partition ). Ansonsten könntest du mal deine menu.lst und Partitionen-Auflistung posten, damit wir uns hier ein besseres Bild verschaffen können. Gruß Froggy |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 20 |
Hallo Froggy, ist es das was Du sehen wolltest? Aus openSUSE "var/log/boot.msg" Auf der ersten Festplatte liegen - sda 1 Windows - sda 2 Daten - sda 3 Ubuntu - sda 4 openSUSE Wie gesagt, booten kann ich Windows und openSUSE, aber nicht Ubuntu. Grüße, crocodeal -und klogd 1.4.1, log source = ksyslog started. <5>[ 0.000000] Linux version 2.6.31.12-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] NSC Geode by NSC <6>[ 0.000000] Cyrix CyrixInstead <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] Transmeta GenuineTMx86 <6>[ 0.000000] Transmeta TransmetaCPU <6>[ 0.000000] UMC UMC UMC UMC <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <6>[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) <6>[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) <6>[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <6>[ 0.000000] DMI 2.4 present. <6>[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000 <7>[ 0.000000] MTRR default type: uncachable <7>[ 0.000000] MTRR fixed ranges enabled: <7>[ 0.000000] 00000-9FFFF write-back <7>[ 0.000000] A0000-BFFFF uncachable <7>[ 0.000000] C0000-CDFFF write-protect <7>[ 0.000000] CE000-EFFFF uncachable <7>[ 0.000000] F0000-FFFFF write-through <7>[ 0.000000] MTRR variable ranges enabled: <7>[ 0.000000] 0 base 000000000 mask F80000000 write-back <7>[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable <7>[ 0.000000] 2 disabled <7>[ 0.000000] 3 disabled <7>[ 0.000000] 4 disabled <7>[ 0.000000] 5 disabled <7>[ 0.000000] 6 disabled <7>[ 0.000000] 7 disabled <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) <6>[ 0.000000] Scanning 1 areas for low memory corruption <6>[ 0.000000] modified physical RAM map: <6>[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) <6>[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) <6>[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) <6>[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) <6>[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) <6>[ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable) <6>[ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS) <6>[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data) <6>[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved) <6>[ 0.000000] modified: 00000000c0000000 - 00000000d0000000 (reserved) <6>[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) <7>[ 0.000000] initial memory mapped : 0 - 01000000 <6>[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 <6>[ 0.000000] NX (Execute Disable) protection: active <7>[ 0.000000] 0000000000 - 0000200000 page 4k <7>[ 0.000000] 0000200000 - 0036e00000 page 2M <7>[ 0.000000] 0036e00000 - 0036ffe000 page 4k <7>[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-12000 <6>[ 0.000000] RAMDISK: 379ea000 - 37fef0ba <6>[ 0.000000] Allocated new RAMDISK: 00af9000 - 010fe0ba <6>[ 0.000000] Move RAMDISK from 00000000379ea000 - 0000000037fef0b9 to 00af9000 - 010fe0b9 <4>[ 0.000000] ACPI: RSDP 000f6870 00014 (v00 GBT ) <4>[ 0.000000] ACPI: RSDT 7fee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>[ 0.000000] ACPI: DSDT 7fee3180 040E1 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) <4>[ 0.000000] ACPI: FACS 7fee0000 00040 <4>[ 0.000000] ACPI: HPET 7fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) <4>[ 0.000000] ACPI: MCFG 7fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>[ 0.000000] ACPI: APIC 7fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>[ 0.000000] ACPI: SSDT 7fee7ae0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <4>[ 0.000000] could not find any ACPI SRAT memory areas. <3>[ 0.000000] failed to get NUMA memory information from SRAT table <7>[ 0.000000] NUMA - single node, flat memory mode <6>[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 7fee0 <7>[ 0.000000] Setting physnode_map array to node 0 for pfns: <7>[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 <7>[ 0.000000] node 0 pfn: [0 - 7fee0] <7>[ 0.000000] Reserving 4096 pages of KVA for lmem_map of node 0 at 7ee00 <7>[ 0.000000] remove_active_range (0, 519680, 523776) <6>[ 0.000000] Reserving total of 1000 pages for numa KVA remap <6>[ 0.000000] kva_start_pfn ~ 35e00 max_low_pfn ~ 36ffe <6>[ 0.000000] max_pfn = 7fee0 <5>[ 0.000000] 1166MB HIGHMEM available. <5>[ 0.000000] 879MB LOWMEM available. <7>[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe <7>[ 0.000000] Low memory ends at vaddr f6ffe000 <7>[ 0.000000] node 0 will remap to vaddr f5e00000 - f6e00000 <7>[ 0.000000] allocate_pgdat: node 0 NODE_DATA f5e00000 <7>[ 0.000000] remap_numa_kva: node 0 <7>[ 0.000000] remap_numa_kva: f5e00000 to pfn 0007ee00 <7>[ 0.000000] remap_numa_kva: f6000000 to pfn 0007f000 <7>[ 0.000000] remap_numa_kva: f6200000 to pfn 0007f200 <7>[ 0.000000] remap_numa_kva: f6400000 to pfn 0007f400 <7>[ 0.000000] remap_numa_kva: f6600000 to pfn 0007f600 <7>[ 0.000000] remap_numa_kva: f6800000 to pfn 0007f800 <7>[ 0.000000] remap_numa_kva: f6a00000 to pfn 0007fa00 <7>[ 0.000000] remap_numa_kva: f6c00000 to pfn 0007fc00 <7>[ 0.000000] High memory starts at vaddr f6ffe000 <6>[ 0.000000] mapped low ram: 0 - 36ffe000 <6>[ 0.000000] low ram: 0 - 36ffe000 <6>[ 0.000000] node 0 low ram: 00000000 - 36ffe000 <6>[ 0.000000] node 0 bootmap 0000f000 - 00015e00 <6>[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000] <6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6>[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] <6>[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] <6>[ 0.000000] #3 [0000200000 - 0000aefa90] TEXT DATA BSS ==> [0000200000 - 0000aefa90] <6>[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] <6>[ 0.000000] #5 [0000af0000 - 0000af80f6] BRK ==> [0000af0000 - 0000af80f6] <6>[ 0.000000] #6 [0000007000 - 000000f000] PGTABLE ==> [0000007000 - 000000f000] <6>[ 0.000000] #7 [0000af9000 - 00010fe0ba] NEW RAMDISK ==> [0000af9000 - 00010fe0ba] <6>[ 0.000000] #8 [007ee00000 - 007fe00000] KVA RAM <6>[ 0.000000] #9 [0035e00000 - 0036e00000] KVA PG ==> [0035e00000 - 0036e00000] <6>[ 0.000000] #10 [000000f000 - 0000016000] BOOTMAP ==> [000000f000 - 0000016000] <6>[ 0.000000] found SMP MP-table at [c00f4ea0] f4ea0 <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0x00000000 -> 0x00001000 <4>[ 0.000000] Normal 0x00001000 -> 0x00036ffe <4>[ 0.000000] HighMem 0x00036ffe -> 0x0007fee0 <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[4] active PFN ranges <4>[ 0.000000] 0: 0x00000000 -> 0x00000002 <4>[ 0.000000] 0: 0x00000006 -> 0x0000009f <4>[ 0.000000] 0: 0x00000100 -> 0x0007ee00 <4>[ 0.000000] 0: 0x0007fe00 -> 0x0007fee0 <7>[ 0.000000] On node 0 totalpages: 519803 <7>[ 0.000000] free_area_init_node: node 0, pgdat f5e00000, node_mem_map c10ff000 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 3963 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1728 pages used for memmap <7>[ 0.000000] Normal zone: 219454 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 2334 pages used for memmap <7>[ 0.000000] HighMem zone: 292292 pages, LIFO batch:31 <6>[ 0.000000] Using APIC driver default <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) <6>[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <6>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs <7>[ 0.000000] nr_irqs_gsi: 24 <6>[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:40100000) <6>[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8 <6>[ 0.000000] PERCPU: Embedded 14 pages at c2109000, static data 34204 bytes <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515709 <4>[ 0.000000] Policy zone: HighMem <5>[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-MAXTOR_STM3500320AS_9QM6S26J-part6 resume=/dev/disk/by-id/ata-MAXTOR_STM3500320AS_9QM6S26J-part5 splash=silent quiet vga=791 <6>[ 0.000000] bootsplash: silent mode. <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Enabling fast FPU save and restore... done. <6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done. <6>[ 0.000000] Initializing CPU#0 <6>[ 0.000000] Initializing HighMem for node 0 (00036ffe:0007fee0) <6>[ 0.000000] Memory: 2029972k/2096000k available (4722k kernel code, 49236k reserved, 2949k data, 464k init, 1178504k highmem) <6>[ 0.000000] virtual kernel memory layout: <6>[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB) <6>[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB) <6>[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) <6>[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) <6>[ 0.000000] .init : 0xc097f000 - 0xc09f3000 ( 464 kB) <6>[ 0.000000] .data : 0xc069c9e6 - 0xc097e0c8 (2949 kB) <6>[ 0.000000] .text : 0xc0200000 - 0xc069c9e6 (4722 kB) <6>[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. <6>[ 0.000000] Hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:2304 nr_irqs:440 <4>[ 0.000000] Fast TSC calibration using PIT <4>[ 0.000000] Detected 2000.432 MHz processor. <4>[ 0.000090] Console: colour dummy device 80x25 <6>[ 0.000094] console [tty0] enabled <7>[ 0.000271] hpet clockevent registered <6>[ 0.000275] HPET: 3 timers in total, 0 timers will be used for per-cpu timer <6>[ 0.000281] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.86 BogoMIPS (lpj=2000432) <4>[ 0.005050] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>[ 0.005139] Security Framework initialized <6>[ 0.005153] AppArmor: AppArmor initialized <4>[ 0.005175] Mount-cache hash table entries: 512 <6>[ 0.005320] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.005323] CPU: L2 cache: 1024K <6>[ 0.005326] CPU: Physical Processor ID: 0 <6>[ 0.005328] CPU: Processor Core ID: 0 <6>[ 0.005332] mce: CPU supports 6 MCE banks <6>[ 0.005339] CPU0: Thermal monitoring enabled (TM2) <6>[ 0.005343] using mwait in idle threads. <6>[ 0.005348] Performance Counters: Core2 events, Intel PMU driver. <6>[ 0.005354] ... version: 2 <6>[ 0.005356] ... bit width: 40 <6>[ 0.005358] ... generic counters: 2 <6>[ 0.005360] ... value mask: 000000ffffffffff <6>[ 0.005362] ... max period: 000000007fffffff <6>[ 0.005364] ... fixed-purpose counters: 3 <6>[ 0.005366] ... counter mask: 0000000700000003 <6>[ 0.005372] Checking 'hlt' instruction... OK. <6>[ 0.010313] ACPI: Core revision 20090521 <6>[ 0.017221] Mapping cpu 0 to node 0 <6>[ 0.017394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.027967] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d <6>[ 0.027995] Booting processor 1 APIC 0x1 ip 0x6000 <6>[ 0.000999] Initializing CPU#1 <6>[ 0.000999] Mapping cpu 1 to node 0 <6>[ 0.000999] Calibrating delay using timer specific routine.. 3999.72 BogoMIPS (lpj=1999862) <6>[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K <6>[ 0.000999] CPU: L2 cache: 1024K <6>[ 0.000999] CPU: Physical Processor ID: 0 <6>[ 0.000999] CPU: Processor Core ID: 1 <6>[ 0.000999] mce: CPU supports 6 MCE banks <6>[ 0.000999] CPU1: Thermal monitoring enabled (TM2) <6>[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>[ 0.099521] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d <6>[ 0.099534] checking TSC synchronization [CPU#0 -> CPU#1]: passed. <6>[ 0.100010] Brought up 2 CPUs <6>[ 0.100010] Total of 2 processors activated (8000.58 BogoMIPS). <7>[ 0.100086] CPU0 attaching sched-domain: <7>[ 0.100090] domain 0: span 0-1 level MC <7>[ 0.100093] groups: 0 1 <7>[ 0.100098] domain 1: span 0-1 level NODE <7>[ 0.100101] groups: 0-1 <7>[ 0.100107] CPU1 attaching sched-domain: <7>[ 0.100109] domain 0: span 0-1 level MC <7>[ 0.100112] groups: 1 0 <7>[ 0.100117] domain 1: span 0-1 level NODE <7>[ 0.100119] groups: 0-1 <3>[ 0.102061] tmpfs: No value for mount option 'mode' <6>[ 0.102073] devtmpfs: initialized <6>[ 0.102222] Booting paravirtualized kernel on bare hardware <6>[ 0.103012] regulator: core version 0.5 <4>[ 0.103036] Time: 19:44:07 Date: 02/15/10 <6>[ 0.103111] NET: Registered protocol family 16 <6>[ 0.103260] ACPI: bus type pci registered <5>[ 0.103339] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 <5>[ 0.103343] PCI: MCFG area at c0000000 reserved in E820 <6>[ 0.103345] PCI: Using MMCONFIG for extended config space <6>[ 0.103348] PCI: Using configuration type 1 for base access <4>[ 0.104071] bio: create slab <bio-0> at 0 <7>[ 0.107034] ACPI: EC: Look up EC in DSDT <6>[ 0.114395] ACPI: Interpreter enabled <6>[ 0.114395] ACPI: (supports S0 S3 S4 S5) <6>[ 0.114395] ACPI: Using IOAPIC for interrupt routing <6>[ 0.120185] ACPI: No dock devices found. <6>[ 0.120303] ACPI: PCI Root Bridge [PCI0] (0000:00) <6>[ 0.120435] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>[ 0.120439] pci 0000:00:01.0: PME# disabled <7>[ 0.120509] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe5100000-0xe5103fff] <6>[ 0.120555] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <6>[ 0.120560] pci 0000:00:1b.0: PME# disabled <6>[ 0.120624] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 0.120629] pci 0000:00:1c.0: PME# disabled <6>[ 0.120694] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold <6>[ 0.120699] pci 0000:00:1c.1: PME# disabled <7>[ 0.120753] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f] <7>[ 0.120805] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f] <7>[ 0.120859] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f] <7>[ 0.120910] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f] <7>[ 0.120966] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe5104000-0xe51043ff] <6>[ 0.121144] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO <6>[ 0.121149] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO <6>[ 0.121153] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) <6>[ 0.121158] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) <7>[ 0.121210] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] <7>[ 0.121217] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] <7>[ 0.121223] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] <7>[ 0.121230] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] <7>[ 0.121237] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] <6>[ 0.121263] pci 0000:00:1f.2: PME# supported from D3hot <6>[ 0.121267] pci 0000:00:1f.2: PME# disabled <7>[ 0.121316] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] <7>[ 0.121374] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff] <7>[ 0.121385] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] <7>[ 0.121395] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff] <7>[ 0.121402] pci 0000:01:00.0: reg 24 io port: [0xc000-0xc07f] <7>[ 0.121409] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] <7>[ 0.121550] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] <7>[ 0.121554] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe3ffffff] <7>[ 0.121560] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] <7>[ 0.121604] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] <7>[ 0.121661] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff] <7>[ 0.121683] pci 0000:03:00.0: reg 18 64bit mmio: [0xe5010000-0xe5010fff] <7>[ 0.121698] pci 0000:03:00.0: reg 20 64bit mmio: [0xe5000000-0xe500ffff] <7>[ 0.121708] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] <7>[ 0.121750] pci 0000:03:00.0: supports D1 D2 <6>[ 0.121753] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 0.121758] pci 0000:03:00.0: PME# disabled <7>[ 0.124095] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff] <7>[ 0.124103] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe4ffffff] <7>[ 0.124114] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe5000000-0xe50fffff] <6>[ 0.124179] pci 0000:00:1e.0: transparent bridge <7>[ 0.124184] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] <7>[ 0.124212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>[ 0.124430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] <7>[ 0.124506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] <7>[ 0.124597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <6>[ 0.138696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <6>[ 0.138823] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <6>[ 0.138949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <6>[ 0.139081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <6>[ 0.139205] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <6>[ 0.139331] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <6>[ 0.139456] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <6>[ 0.139582] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) <5>[ 0.139816] SCSI subsystem initialized <7>[ 0.140005] libata version 3.00 loaded. <6>[ 0.140027] usbcore: registered new interface driver usbfs <6>[ 0.140027] usbcore: registered new interface driver hub <6>[ 0.140027] usbcore: registered new device driver usb <6>[ 0.140029] PCI: Using ACPI for IRQ routing <6>[ 0.141999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>[ 0.142010] hpet0: 3 comparators, 64-bit 14.318180 MHz counter <6>[ 0.146984] AppArmor: AppArmor Filesystem Enabled <6>[ 0.149618] pnp: PnP ACPI init <6>[ 0.149643] ACPI: bus type pnp registered <6>[ 0.153211] pnp: PnP ACPI: found 15 devices <6>[ 0.153214] ACPI: ACPI bus type pnp unregistered <6>[ 0.153226] system 00:01: ioport range 0x4d0-0x4d1 has been reserved <6>[ 0.153230] system 00:01: ioport range 0x290-0x29f has been reserved <6>[ 0.153233] system 00:01: ioport range 0x800-0x87f has been reserved <6>[ 0.153237] system 00:01: ioport range 0x290-0x294 has been reserved <6>[ 0.153240] system 00:01: ioport range 0x880-0x88f has been reserved <6>[ 0.153251] system 00:0b: ioport range 0x400-0x4bf could not be reserved <6>[ 0.153258] system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved <6>[ 0.153265] system 00:0d: iomem range 0xce000-0xcffff has been reserved <6>[ 0.153269] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved <6>[ 0.153272] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved <6>[ 0.153276] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved <6>[ 0.153279] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved <6>[ 0.153283] system 00:0d: iomem range 0x0-0x9ffff could not be reserved <6>[ 0.153286] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved <6>[ 0.153290] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved <6>[ 0.153293] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved <6>[ 0.153297] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved <6>[ 0.153300] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved <6>[ 0.153304] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved <6>[ 0.153308] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved <6>[ 0.153311] system 00:0d: iomem range 0xe0000-0xeffff has been reserved <6>[ 0.188156] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 <6>[ 0.188161] pci 0000:00:01.0: IO window: 0xc000-0xcfff <6>[ 0.188166] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff <6>[ 0.188170] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff <6>[ 0.188176] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 <6>[ 0.188180] pci 0000:00:1c.0: IO window: 0xb000-0xbfff <6>[ 0.188186] pci 0000:00:1c.0: MEM window: disabled <6>[ 0.188190] pci 0000:00:1c.0: PREFETCH window: disabled <6>[ 0.188195] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 <6>[ 0.188199] pci 0000:00:1c.1: IO window: 0xd000-0xdfff <6>[ 0.188205] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff <6>[ 0.188210] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff <6>[ 0.188217] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 <6>[ 0.188221] pci 0000:00:1e.0: IO window: 0xa000-0xafff <6>[ 0.188226] pci 0000:00:1e.0: MEM window: disabled <6>[ 0.188230] pci 0000:00:1e.0: PREFETCH window: disabled <7>[ 0.188242] alloc irq_desc for 16 on node 0 <7>[ 0.188245] alloc kstat_irqs on node 0 <6>[ 0.188251] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.188256] pci 0000:00:01.0: setting latency timer to 64 <6>[ 0.188265] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.188270] pci 0000:00:1c.0: setting latency timer to 64 <7>[ 0.188277] alloc irq_desc for 17 on node 0 <7>[ 0.188282] alloc kstat_irqs on node 0 <6>[ 0.188286] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>[ 0.188291] pci 0000:00:1c.1: setting latency timer to 64 <7>[ 0.188299] pci 0000:00:1e.0: setting latency timer to 64 <7>[ 0.188304] pci_bus 0000:00: resource 0 io: [0x00-0xffff] <7>[ 0.188307] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] <7>[ 0.188311] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] <7>[ 0.188314] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff] <7>[ 0.188317] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] <7>[ 0.188320] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] <7>[ 0.188323] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] <7>[ 0.188326] pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff] <7>[ 0.188329] pci_bus 0000:03: resource 2 pref mem [0xe5000000-0xe50fffff] <7>[ 0.188333] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] <7>[ 0.188335] pci_bus 0000:04: resource 3 io: [0x00-0xffff] <7>[ 0.188339] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] <6>[ 0.188420] NET: Registered protocol family 2 <6>[ 0.188551] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.188949] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.189333] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.189573] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.189576] TCP reno registered <6>[ 0.189772] NET: Registered protocol family 1 <6>[ 0.189848] Unpacking initramfs... <6>[ 0.334862] Freeing initrd memory: 6164k freed <6>[ 0.338245] Scanning for low memory corruption every 60 seconds <6>[ 0.338434] audit: initializing netlink socket (disabled) <5>[ 0.338450] type=2000 audit(1266263047.337:1): initialized <4>[ 0.341812] highmem bounce pool size: 64 pages <6>[ 0.341818] HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>[ 0.341942] VFS: Disk quotas dquot_6.5.2 <4>[ 0.341993] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.342150] msgmni has been set to 418 <6>[ 0.342267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) <6>[ 0.342271] io scheduler noop registered <6>[ 0.342273] io scheduler anticipatory registered <6>[ 0.342275] io scheduler deadline registered <6>[ 0.342294] io scheduler cfq registered (default) <7>[ 0.342480] pci 0000:01:00.0: Boot video device <7>[ 0.342631] alloc irq_desc for 24 on node 0 <7>[ 0.342634] alloc kstat_irqs on node 0 <7>[ 0.342644] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X <7>[ 0.342651] pcieport-driver 0000:00:01.0: setting latency timer to 64 <7>[ 0.342797] alloc irq_desc for 25 on node 0 <7>[ 0.342799] alloc kstat_irqs on node 0 <7>[ 0.342808] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X <7>[ 0.342817] pcieport-driver 0000:00:1c.0: setting latency timer to 64 <7>[ 0.342969] alloc irq_desc for 26 on node 0 <7>[ 0.342972] alloc kstat_irqs on node 0 <7>[ 0.342985] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X <7>[ 0.342994] pcieport-driver 0000:00:1c.1: setting latency timer to 64 <4>[ 0.343120] pci-stub: invalid id string "" <6>[ 0.343228] vesafb: framebuffer at 0xe1000000, mapped to 0xf7880000, using 3072k, total 14336k <6>[ 0.343232] vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>[ 0.343234] vesafb: protected mode interface info at c000:c4c0 <6>[ 0.343237] vesafb: pmi: set display start = c00cc523, set palette = c00cc57e <6>[ 0.343239] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>[ 0.343257] vesafb: scrolling: redraw <6>[ 0.343260] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>[ 0.343430] bootsplash 3.1.6-2004/03/31: looking for picture... <6>[ 0.354786] bootsplash: silentjpeg size 100573 bytes <6>[ 0.370913] bootsplash: ...found (1024x768, 27393 bytes, v3). <4>[ 0.414315] Console: switching to colour frame buffer device 124x44 <6>[ 0.457420] fb0: VESA VGA frame buffer device <6>[ 0.459177] Non-volatile memory driver v1.3 <6>[ 0.459181] Linux agpgart interface v0.103 <6>[ 0.459212] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled <6>[ 0.459309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 0.459797] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <7>[ 0.460094] ata_piix 0000:00:1f.2: version 2.13 <7>[ 0.460113] alloc irq_desc for 19 on node 0 <7>[ 0.460116] alloc kstat_irqs on node 0 <6>[ 0.460124] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>[ 0.460129] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] <7>[ 0.460174] ata_piix 0000:00:1f.2: setting latency timer to 64 <6>[ 0.460238] scsi0 : ata_piix <6>[ 0.460341] scsi1 : ata_piix <6>[ 0.461291] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 <6>[ 0.461295] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 <6>[ 0.461353] Fixed MDIO Bus: probed <6>[ 0.461360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <7>[ 0.461501] alloc irq_desc for 23 on node 0 <7>[ 0.461503] alloc kstat_irqs on node 0 <6>[ 0.461509] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 0.461524] ehci_hcd 0000:00:1d.7: setting latency timer to 64 <6>[ 0.461528] ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>[ 0.461557] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>[ 0.461562] ehci_hcd 0000:00:1d.7: using broken periodic workaround <7>[ 0.465465] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported <6>[ 0.465480] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5104000 <6>[ 0.475054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>[ 0.475095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 0.475101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.475105] usb usb1: Product: EHCI Host Controller <6>[ 0.475110] usb usb1: Manufacturer: Linux 2.6.31.12-0.1-desktop ehci_hcd <6>[ 0.475114] usb usb1: SerialNumber: 0000:00:1d.7 <6>[ 0.475236] usb usb1: configuration #1 chosen from 1 choice <6>[ 0.475269] hub 1-0:1.0: USB hub found <6>[ 0.475278] hub 1-0:1.0: 8 ports detected <6>[ 0.475366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 0.475389] uhci_hcd: USB Universal Host Controller Interface driver <6>[ 0.476673] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 0.476684] uhci_hcd 0000:00:1d.0: setting latency timer to 64 <6>[ 0.476690] uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>[ 0.476707] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>[ 0.476737] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 <6>[ 0.476789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.476794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.476799] usb usb2: Product: UHCI Host Controller <6>[ 0.476803] usb usb2: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.476808] usb usb2: SerialNumber: 0000:00:1d.0 <6>[ 0.476891] usb usb2: configuration #1 chosen from 1 choice <6>[ 0.476922] hub 2-0:1.0: USB hub found <6>[ 0.476930] hub 2-0:1.0: 2 ports detected <6>[ 0.477682] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <7>[ 0.477692] uhci_hcd 0000:00:1d.1: setting latency timer to 64 <6>[ 0.477698] uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>[ 0.477713] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>[ 0.477754] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 <6>[ 0.477810] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.477815] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.477826] usb usb3: Product: UHCI Host Controller <6>[ 0.477828] usb usb3: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.477831] usb usb3: SerialNumber: 0000:00:1d.1 <6>[ 0.477905] usb usb3: configuration #1 chosen from 1 choice <6>[ 0.477935] hub 3-0:1.0: USB hub found <6>[ 0.477943] hub 3-0:1.0: 2 ports detected <7>[ 0.478690] alloc irq_desc for 18 on node 0 <7>[ 0.478695] alloc kstat_irqs on node 0 <6>[ 0.478704] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <7>[ 0.478714] uhci_hcd 0000:00:1d.2: setting latency timer to 64 <6>[ 0.478720] uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>[ 0.478734] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>[ 0.478774] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 <6>[ 0.478829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.478838] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.478841] usb usb4: Product: UHCI Host Controller <6>[ 0.478844] usb usb4: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.478846] usb usb4: SerialNumber: 0000:00:1d.2 <6>[ 0.478919] usb usb4: configuration #1 chosen from 1 choice <6>[ 0.478951] hub 4-0:1.0: USB hub found <6>[ 0.478958] hub 4-0:1.0: 2 ports detected <6>[ 0.479702] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.479712] uhci_hcd 0000:00:1d.3: setting latency timer to 64 <6>[ 0.479718] uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>[ 0.479733] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 <6>[ 0.479773] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 <6>[ 0.479828] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 0.479833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.479838] usb usb5: Product: UHCI Host Controller <6>[ 0.479847] usb usb5: Manufacturer: Linux 2.6.31.12-0.1-desktop uhci_hcd <6>[ 0.479850] usb usb5: SerialNumber: 0000:00:1d.3 <6>[ 0.479924] usb usb5: configuration #1 chosen from 1 choice <6>[ 0.479956] hub 5-0:1.0: USB hub found <6>[ 0.479963] hub 5-0:1.0: 2 ports detected <6>[ 0.480029] Initializing USB Mass Storage driver... <6>[ 0.480064] usbcore: registered new interface driver usb-storage <6>[ 0.480067] USB Mass Storage support registered. <6>[ 0.480098] usbcore: registered new interface driver libusual <6>[ 0.480113] usbcore: registered new interface driver ums-alauda <6>[ 0.480129] usbcore: registered new interface driver ums-cypress <6>[ 0.480143] usbcore: registered new interface driver ums-datafab <6>[ 0.480156] usbcore: registered new interface driver ums-freecom <6>[ 0.480170] usbcore: registered new interface driver ums-isd200 <6>[ 0.480183] usbcore: registered new interface driver ums-jumpshot <6>[ 0.480196] usbcore: registered new interface driver ums-karma <6>[ 0.480209] usbcore: registered new interface driver ums-onetouch <6>[ 0.480223] usbcore: registered new interface driver ums-sddr09 <6>[ 0.480236] usbcore: registered new interface driver ums-sddr55 <6>[ 0.480250] usbcore: registered new interface driver ums-usbat <6>[ 0.480309] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>[ 0.480684] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 0.480693] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 0.480790] mice: PS/2 mouse device common for all mice <6>[ 0.480959] rtc_cmos 00:04: RTC can wake from S4 <6>[ 0.481005] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <6>[ 0.481031] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs <6>[ 0.481046] cpuidle: using governor ladder <6>[ 0.481049] cpuidle: using governor menu <6>[ 0.481358] usbcore: registered new interface driver hiddev <6>[ 0.481374] usbcore: registered new interface driver usbhid <6>[ 0.481377] usbhid: v2.6:USB HID core driver <6>[ 0.499275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <7>[ 0.500699] Switched to high resolution mode on CPU 1 <7>[ 0.501117] Switched to high resolution mode on CPU 0 <6>[ 0.550854] TCP cubic registered <6>[ 0.550921] NET: Registered protocol family 10 <6>[ 0.551476] lo: Disabled Privacy Extensions <6>[ 0.551898] lib80211: common routines for IEEE802.11 drivers <7>[ 0.551901] lib80211_crypt: registered algorithm 'NULL' <6>[ 0.551917] Using IPI No-Shortcut mode <7>[ 0.552019] PM: Checking image partition /dev/disk/by-id/ata-MAXTOR_STM3500320AS_9QM6S26J-part5 <6>[ 0.615450] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7 <6>[ 0.615454] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 0.618479] ata2.00: configured for UDMA/133 <6>[ 0.622191] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168 <6>[ 0.622196] ata1.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133 <6>[ 0.622199] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 0.622236] ata1.01: ATAPI: HL-DT-ST DVDRAM GH20LS15, JL00, max UDMA/100 <6>[ 0.628627] ata1.00: configured for UDMA/133 <6>[ 0.634298] ata1.01: configured for UDMA/100 <5>[ 0.636696] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5 <5>[ 0.638702] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) <5>[ 0.640300] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GH20LS15 JL00 PQ: 0 ANSI: 5 <5>[ 0.640333] sd 0:0:0:0: [sda] Write Protect is off <7>[ 0.640339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 0.640382] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 0.640586] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 <6>[ 0.640596] sda: <5>[ 0.640736] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) <5>[ 0.640787] sd 1:0:0:0: [sdb] Write Protect is off <7>[ 0.640791] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>[ 0.640817] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 0.640954] sdb: <7>[ 0.643213] psmouse serio1: ID: 10 00 64 <4>[ 0.646561] sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 <5>[ 0.646994] sd 1:0:0:0: [sdb] Attached SCSI disk <4>[ 0.661713] sda5 sda6 sda7 > <5>[ 0.675054] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 0.777051] usb 1-1: new high speed USB device using ehci_hcd and address 2 <6>[ 0.894814] usb 1-1: New USB device found, idVendor=05e3, idProduct=0716 <6>[ 0.894820] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 <6>[ 0.894825] usb 1-1: Product: USB Storage <6>[ 0.894829] usb 1-1: SerialNumber: 000000009722 <6>[ 0.894947] usb 1-1: configuration #1 chosen from 1 choice <6>[ 0.895591] scsi2 : SCSI emulation for USB Mass Storage devices <7>[ 0.895660] usb-storage: device found at 2 <7>[ 0.895663] usb-storage: waiting for device to settle before scanning <6>[ 1.460096] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 <7>[ 1.462943] PM: Resume from disk failed. <4>[ 1.462966] registered taskstats version 1 <4>[ 1.463134] Magic number: 14:800:748 <6>[ 1.463199] rtc_cmos 00:04: setting system clock to 2010-02-15 19:44:09 UTC (1266263049) <6>[ 1.463292] Freeing unused kernel memory: 464k freed <6>[ 1.463490] Write protecting the kernel text: 4724k <6>[ 1.463623] Write protecting the kernel read-only data: 2708k <6>[ 1.522215] Uniform Multi-Platform E-IDE driver <4>[ 1.529100] ACPI: SSDT 7fee74c0 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) <6>[ 1.529409] processor LNXCPU:00: registered as cooling_device0 <6>[ 1.529415] ACPI: Processor [CPU0] (supports 8 throttling states) <4>[ 1.529662] ACPI: SSDT 7fee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) <6>[ 1.529975] processor LNXCPU:01: registered as cooling_device1 <6>[ 1.529980] ACPI: Processor [CPU1] (supports 8 throttling states) <6>[ 1.549828] udev: starting version 146 <5>[ 1.896144] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 <5>[ 1.897001] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 <5>[ 1.898635] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 <5>[ 1.899245] sd 2:0:0:0: [sdc] Attached SCSI removable disk <5>[ 1.899872] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 <5>[ 1.903501] sd 2:0:0:1: [sdd] Attached SCSI removable disk <5>[ 1.904127] scsi 2:0:0:4: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 <5>[ 1.906968] sd 2:0:0:2: [sde] Attached SCSI removable disk <5>[ 1.908791] sd 2:0:0:3: [sdf] Attached SCSI removable disk <5>[ 1.908872] sd 2:0:0:4: [sdg] Attached SCSI removable disk <7>[ 1.912463] usb-storage: device scan complete <7>[ 2.020669] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 <7>[ 2.020674] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 <7>[ 2.020679] PM: Basic memory bitmaps created <7>[ 2.042229] PM: Basic memory bitmaps freed <6>[ 2.102219] PM: Starting manual resume from disk <7>[ 2.102223] PM: Resume from partition 8:5 <7>[ 2.102225] PM: Checking hibernation image. <7>[ 2.102598] PM: Resume from disk failed. <6>[ 2.197462] EXT4-fs (sda6): barriers enabled <6>[ 2.206700] kjournald2 starting: pid 287, dev sda6:8, commit interval 5 seconds <6>[ 2.207635] EXT4-fs (sda6): internal journal on sda6:8 <6>[ 2.207643] EXT4-fs (sda6): delayed allocation enabled <6>[ 2.207649] EXT4-fs: file extents enabled <6>[ 2.208466] EXT4-fs: mballoc enabled <6>[ 2.208483] EXT4-fs (sda6): mounted filesystem with ordered data mode <7>[ 3.973343] preloadtrace: systemtap: 0.9.9/0.142, base: f7d68000, memory: 34084+77432+22160+13600 data+text+ctx+net, probes: 34 <6>[ 5.352715] udev: starting version 146 <6>[ 5.648868] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <5>[ 5.649698] intel_rng: FWH not detected <6>[ 5.655512] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 <6>[ 5.655564] ACPI: Power Button [PWRF] <6>[ 5.655632] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 <6>[ 5.655674] ACPI: Power Button [PWRB] <5>[ 5.664401] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 5.664440] scsi 0:0:1:0: Attached scsi generic sg1 type 5 <5>[ 5.664474] sd 1:0:0:0: Attached scsi generic sg2 type 0 <5>[ 5.664515] sd 2:0:0:0: Attached scsi generic sg3 type 0 <5>[ 5.664552] sd 2:0:0:1: Attached scsi generic sg4 type 0 <5>[ 5.664589] sd 2:0:0:2: Attached scsi generic sg5 type 0 <5>[ 5.664624] sd 2:0:0:3: Attached scsi generic sg6 type 0 <5>[ 5.664660] sd 2:0:0:4: Attached scsi generic sg7 type 0 <6>[ 5.685272] input: PC Speaker as /devices/platform/pcspkr/input/input4 <4>[ 5.710709] nvidia: module license 'NVIDIA' taints kernel. <4>[ 5.710715] Disabling lock debugging due to kernel taint <6>[ 5.752010] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded <6>[ 5.752033] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 5.752085] r8169 0000:03:00.0: setting latency timer to 64 <7>[ 5.752133] alloc irq_desc for 27 on node 0 <7>[ 5.752135] alloc kstat_irqs on node 0 <7>[ 5.752151] r8169 0000:03:00.0: irq 27 for MSI/MSI-X <6>[ 5.752960] eth0: RTL8168c/8111c at 0xf9562000, 00:1f:d0:07:15:56, XID 3c4000c0 IRQ 27 <6>[ 5.835710] iTCO_vendor_support: vendor-support=0 <6>[ 5.875310] IT8718 SuperIO detected. <6>[ 5.875598] parport_pc 00:08: reported by Plug and Play ACPI <6>[ 5.875653] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] <4>[ 5.945655] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray <6>[ 5.945661] Uniform CD-ROM driver Revision: 3.20 <7>[ 5.945790] sr 0:0:1:0: Attached scsi CD-ROM sr0 <6>[ 5.995256] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 5.995266] nvidia 0000:01:00.0: setting latency timer to 64 <4>[ 5.995428] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue Dec 8 18:51:41 PST 2009 <6>[ 6.002937] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 <6>[ 6.003042] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) <6>[ 6.003109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>[ 6.022053] ppdev: user-space parallel port driver <6>[ 6.244943] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 6.244978] HDA Intel 0000:00:1b.0: setting latency timer to 64 <6>[ 6.305191] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 <6>[ 6.421095] Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k <6>[ 7.598048] device-mapper: uevent: version 1.0.3 <6>[ 7.598226] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com <6>[ 8.002661] loop: module loaded <6>[ 8.038876] EXT4-fs (sda7): barriers enabled <6>[ 8.043999] kjournald2 starting: pid 716, dev sda7:8, commit interval 5 seconds <6>[ 8.047318] EXT4-fs (sda7): internal journal on sda7:8 <6>[ 8.047325] EXT4-fs (sda7): delayed allocation enabled <6>[ 8.047332] EXT4-fs: file extents enabled <6>[ 8.050124] EXT4-fs: mballoc enabled <6>[ 8.050142] EXT4-fs (sda7): mounted filesystem with ordered data mode <6>[ 8.364324] fuse init (API version 7.12) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. |
|
Anmeldungsdatum: Beiträge: 156 |
Heyho crocodeal, nein die Meldungen bringen leider nicht viel. Poste doch bitte die /boot/grub/menu.lst von opensuse und ein Listing welche Daten/Systeme auf welchen Partitionen liegen, z.B. /dev/sda1 -> Windows /dev/sda2 -> swap /dev/sda3 -> Ubuntu /dev/sda4 -> opensuse Wenn du die Belegung nicht weißt, kannst du z.B. mit GParted oder unter Yast unter (ich glaube) System → Partitionierer nachschauen. Gruß Froggy |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 20 |
Hallo Froggy, das einzige was mir gelungen ist, ist ein Screenshot. Ich hoffe Du kannst ihn öffnen / lesen. Gruß, crocodeal |
|
Anmeldungsdatum: Beiträge: 156 |
Hallo Crocodeal, ja aus dem Screenshot lässt sich ganz gut deine Plattenbelegung erraten. Ich fasse nochmal in Textform zusammen: /dev/sda1 -> Windows /dev/sda2 -> Daten (ntfs) /dev/sda3 -> Linux (Ubuntu) /dev/sda5 -> swap /dev/sda6 -> openSuSE ( / ) /dev/sda7 -> /home (openSuSE (und Ubuntu (?) )) D.h. in der /boot/grub/menu.lst (von opensuse) müsste sich ein Eintrag finden ähnlich title Ubuntu 9.04... root (hd0,2) kernel /boot/vmlinuz-..... initrd... und ich vermute stark, dass bei dir einfach statt root (hd0,2) eine andere Partition steht, denn der Fehler 15 sagt uns ja, dass die Datei /boot/vmlinuz... (auf der angegebenen Partition) nicht gefunden werden konnte. Da ich nicht ganz sicher bin ob opensuse sich nicht vielleicht einfach nur in die menu.lst von Ubuntu eingetragen hat, solltest du beim Booten in Grub in den Edit-Modus gehen (E-Taste) und nachschauen, welche root (hd0,X)-Option jetzt effektiv eingetragen ist. Da kannst du auch gleich testen, ob es mit root (hd0,2) besser klappt. Gruß Froggy |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 20 |
Hallo Froggy, GRUB zeigt folgendes an 1. Zeile: root (hd0,2) 2. Zeile: configfile /boot/grub/menu.lst Der Fehler muß wohl woanders liegen. Vielleicht hängt es damit zusammen, daß openSUSE 11.2 GRUB 2 verwendet, Ubuntu 9.04 aber GRUB Legacy (0.97). Angeblich ist GRUB 2 nicht abwärts kompatibel. Grüße, Crocodeal |
|
Anmeldungsdatum: Beiträge: 156 |
Oha das kam unerwartet 😀 Also die zweite Zeile bedeutet, dass Grub die Config von Ubuntu laden soll. Wenn du diesen Eintrag auswählst kommst du dann in einen zweiten (den alten) Bootprompt von Ubuntu? Dann müsstest du dort ebenfalls die root Option überprüfen. Es kann natürlich auch sein, dass die Datei /boot/grub/menu.lst auf der Ubuntu-Partition nicht existiert (sollte sie aber). Kannst du irgendwie sagen bei welcher Datei Grub über das Nicht-Vorhandensein meckert?? Froggy |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 20 |
Sorry, hier muß ich passen. Habe alles mögliche versucht, aber nichts Neues heraus gefunden. Trotzdem vielen Dank für Deine Mühe. Ich werde mal einen Versuch im opensuse Forum starten. Grüße, Crocodeal |
« Vorherige1Nächste »
Antworten |