Seit ein paar Tagen nervt mich mein Rechner beim Start mit der Fehlermeldung, dass die HAL-Enerigieverwaltung für xfce nicht tun würde. Nutze xfce derzeit am seltensten, es tut aber auch, wie kriege ich diese seltsame Energieverwaltung wieder in Gang oder die Meldung weg?
Fehlermeldung HAL-Energieverwaltung abstellen
|
Anmeldungsdatum: Beiträge: 391 Wohnort: 34516 Hof Lauterbach (Vöhl/KB) |
Verfasst: 19. Dezember 2009 13:36
|
|
Supporter
Anmeldungsdatum: Beiträge: 12656 |
Verfasst: 19. Dezember 2009 14:05
Hi, die genaue Fehlermeldung währe interessant. Vielleicht stehts in /var/log/dmesg, häng die Datei einfach mal hier an. |
|
(Threadstarter)
Anmeldungsdatum: Beiträge: 391 Wohnort: 34516 Hof Lauterbach (Vöhl/KB) |
Verfasst: 19. Dezember 2009 15:00
stfischr schrieb:
Welche, es gibt ja gleich vier davon? Die exakte Fehlermeldung beim Einloggen lautet: Energieverwaltung für xfce Der Hal-Dienst läuft nicht |
|
Moderator & Supporter
Anmeldungsdatum: Beiträge: 8679 Wohnort: NRW |
Verfasst: 19. Dezember 2009 16:25
|
|
(Threadstarter)
Anmeldungsdatum: Beiträge: 391 Wohnort: 34516 Hof Lauterbach (Vöhl/KB) |
Verfasst: 19. Dezember 2009 17:01
primus pilus schrieb:
Habs mal angehängt [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] modified: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] modified: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37868000 - 37fef767 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01034767 [ 0.000000] Move RAMDISK from 0000000037868000 - 0000000037fef766 to 008ad000 - 01034766 [ 0.000000] ACPI: RSDP 000f6990 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 3fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 3fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 3fee3180 03955 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 3fee0000 00040 [ 0.000000] ACPI: HPET 3fee6c40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 3fee6cc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 3fee6b40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 3fee6d40 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 3fee71d0 00275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 134MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac0f6] BRK ==> [00008a9000 - 00008ac0f6] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001034767] NEW RAMDISK ==> [00008ad000 - 0001034767] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4fc0] f4fc0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fee0 [ 0.000000] On node 0 totalpages: 261755 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1035000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 270 pages used for memmap [ 0.000000] HighMem zone: 34260 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c183a000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259709 [ 0.000000] Kernel command line: root=UUID=38892dcf-f052-41f2-99b5-19594e069e0c ro quiet splash locale=de_DE [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5237120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fee0) [ 0.000000] Memory: 1016748k/1047424k available (4566k kernel code, 29944k reserved, 2142k data, 540k init, 138120k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1800.025 MHz processor. [ 0.001015] Console: colour VGA+ 80x25 [ 0.001019] console [tty0] enabled [ 0.001189] hpet clockevent registered [ 0.001193] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001199] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.05 BogoMIPS (lpj=7200100) [ 0.001218] Security Framework initialized [ 0.001239] AppArmor: AppArmor initialized [ 0.001246] Mount-cache hash table entries: 512 [ 0.001383] Initializing cgroup subsys ns [ 0.001387] Initializing cgroup subsys cpuacct [ 0.001392] Initializing cgroup subsys memory [ 0.001399] Initializing cgroup subsys freezer [ 0.001401] Initializing cgroup subsys net_cls [ 0.001416] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001419] CPU: L2 cache: 1024K [ 0.001422] CPU: Physical Processor ID: 0 [ 0.001423] CPU: Processor Core ID: 0 [ 0.001427] mce: CPU supports 6 MCE banks [ 0.001435] CPU0: Thermal monitoring enabled (TM2) [ 0.001439] using mwait in idle threads. [ 0.001445] Performance Counters: Core2 events, Intel PMU driver. [ 0.001455] ... version: 2 [ 0.001456] ... bit width: 40 [ 0.001458] ... generic counters: 2 [ 0.001460] ... value mask: 000000ffffffffff [ 0.001463] ... max period: 000000007fffffff [ 0.001465] ... fixed-purpose counters: 3 [ 0.001466] ... counter mask: 0000000700000003 [ 0.001471] Checking 'hlt' instruction... OK. [ 0.018833] ACPI: Core revision 20090521 [ 0.028384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070381] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3599.99 BogoMIPS (lpj=7199986) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.157427] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d [ 0.157442] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160023] Brought up 2 CPUs [ 0.160025] Total of 2 processors activated (7200.04 BogoMIPS). [ 0.160070] CPU0 attaching sched-domain: [ 0.160074] domain 0: span 0-1 level MC [ 0.160076] groups: 0 1 [ 0.160083] CPU1 attaching sched-domain: [ 0.160085] domain 0: span 0-1 level MC [ 0.160088] groups: 1 0 [ 0.160170] Booting paravirtualized kernel on bare hardware [ 0.160236] regulator: core version 0.5 [ 0.160236] Time: 15:12:12 Date: 12/19/09 [ 0.160236] NET: Registered protocol family 16 [ 0.160236] EISA bus registered [ 0.160236] ACPI: bus type pci registered [ 0.160310] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.160313] PCI: MCFG area at f0000000 reserved in E820 [ 0.160315] PCI: Using MMCONFIG for extended config space [ 0.160317] PCI: Using configuration type 1 for base access [ 0.161473] bio: create slab <bio-0> at 0 [ 0.164244] ACPI: EC: Look up EC in DSDT [ 0.169341] ACPI: Interpreter enabled [ 0.169356] ACPI: (supports S0 S3 S4 S5) [ 0.169380] ACPI: Using IOAPIC for interrupt routing [ 0.174033] ACPI: No dock devices found. [ 0.174128] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.174249] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.174253] pci 0000:00:01.0: PME# disabled [ 0.174324] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8000000-0xf8003fff] [ 0.174370] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.174375] pci 0000:00:1b.0: PME# disabled [ 0.174439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.174444] pci 0000:00:1c.0: PME# disabled [ 0.174512] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.174516] pci 0000:00:1c.3: PME# disabled [ 0.174568] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f] [ 0.174621] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f] [ 0.174673] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f] [ 0.174726] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f] [ 0.174776] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8004000-0xf80043ff] [ 0.174949] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.174953] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.174957] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.174962] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.175014] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.175021] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.175028] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.175034] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.175041] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.175068] pci 0000:00:1f.2: PME# supported from D3hot [ 0.175072] pci 0000:00:1f.2: PME# disabled [ 0.175122] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.175180] pci 0000:01:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.175191] pci 0000:01:00.0: reg 18 64bit mmio: [0xf5000000-0xf500ffff] [ 0.175198] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.175209] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.175230] pci 0000:01:00.0: supports D1 D2 [ 0.175268] pci 0000:01:00.1: reg 10 64bit mmio: [0xf5010000-0xf5013fff] [ 0.175309] pci 0000:01:00.1: supports D1 D2 [ 0.175361] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.175365] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.175371] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.175416] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] [ 0.175484] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.175508] pci 0000:03:00.0: reg 18 64bit mmio: [0xf7000000-0xf7000fff] [ 0.175532] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.175583] pci 0000:03:00.0: supports D1 D2 [ 0.175585] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.175591] pci 0000:03:00.0: PME# disabled [ 0.175650] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.175654] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.175711] pci 0000:00:1e.0: transparent bridge [ 0.175715] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] [ 0.175740] pci_bus 0000:00: on NUMA node 0 [ 0.175745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.175905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.175975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.176061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.186290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.186390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.186489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.186586] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.186684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.186785] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.186884] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.186984] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.187183] SCSI subsystem initialized [ 0.187221] libata version 3.00 loaded. [ 0.187221] usbcore: registered new interface driver usbfs [ 0.187221] usbcore: registered new interface driver hub [ 0.187221] usbcore: registered new device driver usb [ 0.187221] ACPI: WMI: Mapper loaded [ 0.187221] PCI: Using ACPI for IRQ routing [ 0.196011] Bluetooth: Core ver 2.15 [ 0.196034] NET: Registered protocol family 31 [ 0.196034] Bluetooth: HCI device and connection manager initialized [ 0.196034] Bluetooth: HCI socket layer initialized [ 0.196034] NetLabel: Initializing [ 0.196034] NetLabel: domain hash size = 128 [ 0.196034] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196052] NetLabel: unlabeled traffic allowed by default [ 0.196101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.196107] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.212058] pnp: PnP ACPI init [ 0.212083] ACPI: bus type pnp registered [ 0.214993] pnp: PnP ACPI: found 16 devices [ 0.214996] ACPI: ACPI bus type pnp unregistered [ 0.215002] PnPBIOS: Disabled by ACPI PNP [ 0.215014] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.215018] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.215021] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.215024] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.215028] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.215038] system 00:0c: ioport range 0x400-0x4bf could not be reserved [ 0.215046] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.215052] system 00:0e: iomem range 0xcf400-0xcffff has been reserved [ 0.215055] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved [ 0.215059] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 0.215062] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 0.215066] system 00:0e: iomem range 0x3fee0000-0x3fefffff could not be reserved [ 0.215069] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.215072] system 00:0e: iomem range 0x100000-0x3fedffff could not be reserved [ 0.215076] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.215079] system 00:0e: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.215083] system 00:0e: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.215086] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.215089] system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.215092] system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved [ 0.215096] system 00:0e: iomem range 0xe0000-0xeffff has been reserved [ 0.249771] AppArmor: AppArmor Filesystem Enabled [ 0.249820] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.249824] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.249829] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff [ 0.249833] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.249839] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.249842] pci 0000:00:1c.0: IO window: 0xb000-0xbfff [ 0.249847] pci 0000:00:1c.0: MEM window: disabled [ 0.249851] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.249856] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.249860] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.249866] pci 0000:00:1c.3: MEM window: 0xf6000000-0xf7ffffff [ 0.249870] pci 0000:00:1c.3: PREFETCH window: 0x40000000-0x400fffff [ 0.249875] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.249878] pci 0000:00:1e.0: IO window: 0xa000-0xafff [ 0.249884] pci 0000:00:1e.0: MEM window: disabled [ 0.249888] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.249899] alloc irq_desc for 16 on node -1 [ 0.249901] alloc kstat_irqs on node -1 [ 0.249907] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249912] pci 0000:00:01.0: setting latency timer to 64 [ 0.249920] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249924] pci 0000:00:1c.0: setting latency timer to 64 [ 0.249932] alloc irq_desc for 19 on node -1 [ 0.249933] alloc kstat_irqs on node -1 [ 0.249937] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.249942] pci 0000:00:1c.3: setting latency timer to 64 [ 0.249949] pci 0000:00:1e.0: setting latency timer to 64 [ 0.249953] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.249957] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.249959] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.249962] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff] [ 0.249965] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.249968] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.249971] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.249973] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.249976] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x400fffff] [ 0.249979] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 0.249982] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.249985] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.250025] NET: Registered protocol family 2 [ 0.250135] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.250479] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.250925] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.251213] TCP: Hash tables configured (established 131072 bind 65536) [ 0.251217] TCP reno registered [ 0.251342] NET: Registered protocol family 1 [ 0.251417] Trying to unpack rootfs image as initramfs... [ 0.465516] Freeing initrd memory: 7709k freed [ 0.469673] cpufreq-nforce2: No nForce2 chipset. [ 0.469705] Scanning for low memory corruption every 60 seconds [ 0.469826] audit: initializing netlink socket (disabled) [ 0.469843] type=2000 audit(1261235532.468:1): initialized [ 0.479324] highmem bounce pool size: 64 pages [ 0.479331] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.480954] VFS: Disk quotas dquot_6.5.2 [ 0.481019] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.481628] fuse init (API version 7.12) [ 0.481727] msgmni has been set to 1731 [ 0.481949] alg: No test for stdrng (krng) [ 0.481965] io scheduler noop registered [ 0.481968] io scheduler anticipatory registered [ 0.481970] io scheduler deadline registered [ 0.482016] io scheduler cfq registered (default) [ 0.482113] pci 0000:01:00.0: Boot video device [ 0.482232] alloc irq_desc for 24 on node -1 [ 0.482234] alloc kstat_irqs on node -1 [ 0.482244] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.482251] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.482357] alloc irq_desc for 25 on node -1 [ 0.482359] alloc kstat_irqs on node -1 [ 0.482367] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.482375] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.482499] alloc irq_desc for 26 on node -1 [ 0.482501] alloc kstat_irqs on node -1 [ 0.482509] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.482518] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.482611] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.482693] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.482845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.482849] ACPI: Power Button [PWRF] [ 0.482903] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.482906] ACPI: Power Button [PWRB] [ 0.483198] processor LNXCPU:00: registered as cooling_device0 [ 0.483202] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.483388] ACPI: SSDT 3fee7140 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.483607] processor LNXCPU:01: registered as cooling_device1 [ 0.483612] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.485323] isapnp: Scanning for PnP cards... [ 0.501505] Switched to high resolution mode on CPU 1 [ 0.504038] Switched to high resolution mode on CPU 0 [ 0.838307] isapnp: No Plug & Play device found [ 0.839538] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.839644] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.840026] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.841241] brd: module loaded [ 0.841737] loop: module loaded [ 0.841815] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.841930] ata_piix 0000:00:1f.2: version 2.13 [ 0.841948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.841954] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ] [ 0.841995] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.842070] scsi0 : ata_piix [ 0.842160] scsi1 : ata_piix [ 0.842864] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.842868] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.843784] Fixed MDIO Bus: probed [ 0.843822] PPP generic driver version 2.4.2 [ 0.843919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.843942] alloc irq_desc for 23 on node -1 [ 0.843945] alloc kstat_irqs on node -1 [ 0.843952] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.843966] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.843970] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.844027] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.847923] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.847938] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8004000 [ 0.860029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.860153] usb usb1: configuration #1 chosen from 1 choice [ 0.860185] hub 1-0:1.0: USB hub found [ 0.860192] hub 1-0:1.0: 8 ports detected [ 0.860267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.860285] uhci_hcd: USB Universal Host Controller Interface driver [ 0.860315] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.860322] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.860326] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.860361] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.860384] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 [ 0.860466] usb usb2: configuration #1 chosen from 1 choice [ 0.860497] hub 2-0:1.0: USB hub found [ 0.860504] hub 2-0:1.0: 2 ports detected [ 0.860560] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.860567] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.860570] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.860607] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.860638] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 [ 0.860725] usb usb3: configuration #1 chosen from 1 choice [ 0.860755] hub 3-0:1.0: USB hub found [ 0.860761] hub 3-0:1.0: 2 ports detected [ 0.860807] alloc irq_desc for 18 on node -1 [ 0.860809] alloc kstat_irqs on node -1 [ 0.860815] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.860821] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.860824] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.860860] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.860890] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 [ 0.860972] usb usb4: configuration #1 chosen from 1 choice [ 0.861000] hub 4-0:1.0: USB hub found [ 0.861007] hub 4-0:1.0: 2 ports detected [ 0.861054] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.861060] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.861063] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.861095] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.861125] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 [ 0.861205] usb usb5: configuration #1 chosen from 1 choice [ 0.861233] hub 5-0:1.0: USB hub found [ 0.861240] hub 5-0:1.0: 2 ports detected [ 0.861350] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.861682] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.861688] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.861746] mice: PS/2 mouse device common for all mice [ 0.861850] rtc_cmos 00:04: RTC can wake from S4 [ 0.861885] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.861909] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.862024] device-mapper: uevent: version 1.0.3 [ 0.862127] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.862199] device-mapper: multipath: version 1.1.0 loaded [ 0.862202] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.862321] EISA: Probing bus 0 at eisa.0 [ 0.862349] EISA: Detected 0 cards. [ 0.862434] cpuidle: using governor ladder [ 0.862437] cpuidle: using governor menu [ 0.862993] TCP cubic registered [ 0.863164] NET: Registered protocol family 10 [ 0.863673] lo: Disabled Privacy Extensions [ 0.864052] NET: Registered protocol family 17 [ 0.864074] Bluetooth: L2CAP ver 2.13 [ 0.864076] Bluetooth: L2CAP socket layer initialized [ 0.864079] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.864081] Bluetooth: SCO socket layer initialized [ 0.864112] Bluetooth: RFCOMM TTY layer initialized [ 0.864115] Bluetooth: RFCOMM socket layer initialized [ 0.864117] Bluetooth: RFCOMM ver 1.11 [ 0.865447] Using IPI No-Shortcut mode [ 0.865544] PM: Resume from disk failed. [ 0.865558] registered taskstats version 1 [ 0.865675] Magic number: 5:224:235 [ 0.865749] rtc_cmos 00:04: setting system clock to 2009-12-19 15:12:13 UTC (1261235533) [ 0.865753] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.865755] EDD information not available. [ 0.875761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.004454] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66 [ 1.020335] ata2.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 1.020340] ata2.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 [ 1.020343] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.020372] ata1.00: configured for UDMA/66 [ 1.023788] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5 [ 1.026104] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.026109] Uniform CD-ROM driver Revision: 3.20 [ 1.026247] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.026299] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.028869] ata2.00: configured for UDMA/133 [ 1.028996] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 [ 1.029139] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.029142] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.029194] sd 1:0:0:0: [sda] Write Protect is off [ 1.029198] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.029223] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.029356] sda: sda1 sda2 sda3 sda4 [ 1.047134] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.047155] Freeing unused kernel memory: 540k freed [ 1.047453] Write protecting the kernel text: 4568k [ 1.047504] Write protecting the kernel read-only data: 1836k [ 1.172197] Linux agpgart interface v0.103 [ 1.176535] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.210979] Floppy drive(s): fd0 is 1.44M [ 1.216831] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.216855] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.216904] r8169 0000:03:00.0: setting latency timer to 64 [ 1.216971] alloc irq_desc for 27 on node -1 [ 1.216973] alloc kstat_irqs on node -1 [ 1.216990] r8169 0000:03:00.0: irq 27 for MSI/MSI-X [ 1.217732] eth0: RTL8168b/8111b at 0xf8128000, 00:1d:7d:ae:ae:af, XID 38000000 IRQ 27 [ 1.256372] FDC 0 is a post-1991 82077 [ 1.270593] [drm] Initialized drm 1.1.0 20060810 [ 1.291000] [drm] radeon default to kernel modesetting DISABLED. [ 1.291927] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.291934] pci 0000:01:00.0: setting latency timer to 64 [ 1.292110] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.310595] usb 1-3: configuration #1 chosen from 1 choice [ 1.318459] Initializing USB Mass Storage driver... [ 1.318709] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.318825] usb-storage: device found at 2 [ 1.318828] usb-storage: waiting for device to settle before scanning [ 1.318843] usbcore: registered new interface driver usb-storage [ 1.318847] USB Mass Storage support registered. [ 1.664019] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 1.847005] usb 4-1: configuration #1 chosen from 1 choice [ 2.081650] xor: automatically using best checksumming function: pIII_sse [ 2.099997] pIII_sse : 6613.000 MB/sec [ 2.099999] xor: using function: pIII_sse (6613.000 MB/sec) [ 2.102552] device-mapper: dm-raid45: initialized v0.2594b [ 6.316219] usb-storage: device scan complete [ 6.316829] scsi 2:0:0:0: Direct-Access Myson CS8819A3-116 0 1.01 PQ: 0 ANSI: 0 CCS [ 6.317445] scsi 2:0:0:1: Direct-Access Myson CS8819A3-116 1 1.01 PQ: 0 ANSI: 0 CCS [ 6.318067] scsi 2:0:0:2: Direct-Access Myson CS8819A3-116 2 1.01 PQ: 0 ANSI: 0 CCS [ 6.318692] scsi 2:0:0:3: Direct-Access Myson CS8819A3-116 3 1.01 PQ: 0 ANSI: 0 CCS [ 6.319123] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.319230] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 6.319335] sd 2:0:0:2: Attached scsi generic sg4 type 0 [ 6.319442] sd 2:0:0:3: Attached scsi generic sg5 type 0 [ 6.328318] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 6.328928] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6.329550] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 6.331316] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 7.266406] kjournald starting. Commit interval 5 seconds [ 7.266420] EXT3-fs: mounted filesystem with writeback data mode. [ 7.963829] type=1505 audit(1261235540.594:2): operation="profile_load" pid=480 name=/usr/share/gdm/guest-session/Xsession [ 7.986022] type=1505 audit(1261235540.618:3): operation="profile_load" pid=481 name=/sbin/dhclient3 [ 7.986837] type=1505 audit(1261235540.618:4): operation="profile_load" pid=481 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.987277] type=1505 audit(1261235540.618:5): operation="profile_load" pid=481 name=/usr/lib/connman/scripts/dhclient-script [ 8.015650] type=1505 audit(1261235540.646:6): operation="profile_load" pid=482 name=/usr/bin/evince [ 8.028878] type=1505 audit(1261235540.662:7): operation="profile_load" pid=482 name=/usr/bin/evince-previewer [ 8.036654] type=1505 audit(1261235540.670:8): operation="profile_load" pid=482 name=/usr/bin/evince-thumbnailer [ 8.064877] type=1505 audit(1261235540.698:9): operation="profile_load" pid=484 name=/usr/lib/cups/backend/cups-pdf [ 8.065823] type=1505 audit(1261235540.698:10): operation="profile_load" pid=484 name=/usr/sbin/cupsd [ 8.069190] type=1505 audit(1261235540.702:11): operation="profile_load" pid=485 name=/usr/sbin/mysqld-akonadi [ 23.025924] udev: starting version 147 [ 23.068717] Adding 4891784k swap on /dev/sda2. Priority:-1 extents:1 across:4891784k [ 23.164220] udev: renamed network interface eth0 to eth3 [ 23.171571] EXT3 FS on sda1, internal journal [ 23.214438] parport_pc 00:09: reported by Plug and Play ACPI [ 23.214487] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 23.218204] intel_rng: FWH not detected [ 23.277028] lp: driver loaded but no devices found [ 23.298010] lp0: using parport0 (interrupt-driven). [ 23.305096] eth0: register 'cdc_ether' at usb-0000:00:1d.2-1, CDC Ethernet Device, 00:15:0c:c6:df:c8 [ 23.305137] usbcore: registered new interface driver cdc_ether [ 23.328071] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.330842] ppdev: user-space parallel port driver [ 23.354162] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.354188] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 23.384735] udev: renamed network interface eth0 to eth2 [ 23.426044] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 23.429082] alloc irq_desc for 17 on node -1 [ 23.429089] alloc kstat_irqs on node -1 [ 23.429097] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 23.429132] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 23.508554] psmouse serio1: ID: 10 00 64 [ 24.057453] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 24.096844] kjournald starting. Commit interval 5 seconds [ 24.097106] EXT3 FS on sda3, internal journal [ 24.097114] EXT3-fs: mounted filesystem with writeback data mode. [ 24.335909] __ratelimit: 3 callbacks suppressed [ 24.335913] type=1505 audit(1261235556.966:13): operation="profile_replace" pid=1129 name=/usr/share/gdm/guest-session/Xsession [ 24.337902] type=1505 audit(1261235556.970:14): operation="profile_replace" pid=1130 name=/sbin/dhclient3 [ 24.338721] type=1505 audit(1261235556.970:15): operation="profile_replace" pid=1130 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 24.339162] type=1505 audit(1261235556.970:16): operation="profile_replace" pid=1130 name=/usr/lib/connman/scripts/dhclient-script [ 24.343667] type=1505 audit(1261235556.974:17): operation="profile_replace" pid=1131 name=/usr/bin/evince [ 24.357233] type=1505 audit(1261235556.990:18): operation="profile_replace" pid=1131 name=/usr/bin/evince-previewer [ 24.365850] type=1505 audit(1261235556.998:19): operation="profile_replace" pid=1131 name=/usr/bin/evince-thumbnailer [ 24.376563] type=1505 audit(1261235557.010:20): operation="profile_replace" pid=1133 name=/usr/lib/cups/backend/cups-pdf [ 24.377512] type=1505 audit(1261235557.010:21): operation="profile_replace" pid=1133 name=/usr/sbin/cupsd [ 24.380323] type=1505 audit(1261235557.014:22): operation="profile_replace" pid=1134 name=/usr/sbin/mysqld-akonadi [ 24.644800] r8169: eth3: link down [ 24.645013] ADDRCONF(NETDEV_UP): eth3: link is not ready |
|
Moderator & Supporter
Anmeldungsdatum: Beiträge: 8679 Wohnort: NRW |
Verfasst: 19. Dezember 2009 17:25
Wechsel doch mal vor dem Einloggen in eine Shell (Strg + Alt + F1) und starte hal manuell: sudo start hal Fehlermeldungen? Wechsle wieder in den Grafischen Modus (Strg + Alt + F7) und schau mal ob es dann klappt. |
|
(Threadstarter)
Anmeldungsdatum: Beiträge: 391 Wohnort: 34516 Hof Lauterbach (Vöhl/KB) |
Verfasst: 20. Dezember 2009 14:11
Problem gelöst. einfache Ursache. Eine xfce-sidux-cd, die ich nach dem Brennen des image nicht rausgenommen habe, war die Wurzel allen Übels. Datenträger entfernt, keine Fehlermeldung mehr. |
|
Moderator & Supporter
Anmeldungsdatum: Beiträge: 8679 Wohnort: NRW |
Verfasst: 20. Dezember 2009 14:30
ernani463 schrieb:
Bist du sicher dass das nicht nur Zufall war? Ich kann mir nicht erklären was das mit HAL zu tun haben sollte. |
|
Anmeldungsdatum: Beiträge: 3 |
Verfasst: 27. Dezember 2009 17:00
Ich kann das Verhalten bestätigen. Wenn ich eine CD im Laufwerk habe, dann bekomme ich beim Start auch die HAL Meldung. Funktioniert aber alles bestens. Ist auch reproduzierbar, also CD raus dann läuft es, CD beim nächsten Start wieder rein und wieder die Fehlermeldung. Ist jetzt aber nichts was mich sonderlich stört. Aber vielleicht wundern sich ja noch mehrere über die Meldung. |
|
(Threadstarter)
Anmeldungsdatum: Beiträge: 391 Wohnort: 34516 Hof Lauterbach (Vöhl/KB) |
Verfasst: 27. Dezember 2009 21:10
robert.s schrieb:
Würde den Fehlerbericht noch etwas eingrenzen auf gebrannte CDs und DVDs. Hatte jetzt eine Woche lang eine kommerzielle DVD im LW, null Probleme. Bekam zu Weihnachten eine selbst gebrannte DVD geschenkt, das Ding eingelegt. Irgendwann einen Neustart gemacht und prompt wieder diese HAL-Meldung |
Anmeldungsdatum: Beiträge: 387 |
Verfasst: 2. Februar 2010 15:39
Hab ein ähnliches Problem, ich vermute aber, ein USB-LiveStick und das Bios da mit im Spiel sind. Werds nachher mal testen! |
|
Anmeldungsdatum: Beiträge: 115 |
Verfasst: 9. Februar 2010 10:49
Ich bekomme die Meldung (vor dem Login) leider auch ohne eingelegten Wechseldatenträger Any Suggestions? |
|
Anmeldungsdatum: Beiträge: 387 |
Verfasst: 10. Februar 2010 19:40
ich war die tage bei meinen eltern und wollte dort via wlan ins internet. bei mir geh ich via kabel rein. zuhause hatte ich dann immer diese fehlermeldung. Also habe ich die Zugangsdaten wieder gelöscht..und siehe da, bei mir kommt keine Fehlermeldung mehr. Komisch was? |
« Zurück1Weiter »
antworten |
-
Inyoka unter der Haube
Inyoka v0.0.18 (Fehler in Inyoka melden) -
Zur mobilen Version
2004 – 2011 ubuntuusers.de • Einige Rechte vorbehalten
CC • Lizenz • Kontakt • Datenschutz • Impressum -
Serverhousing gespendet von
