Leider bekomme ich es nicht zum laufen. Ich habe mir jetzt eine PCIe-Grafikkarte mit Realtek-Chipsatz gekauft.
(sempre NCP1000-1)
Die Karte läuft "out-of-the-box", die onboard-Karte habe ich deaktiviert. "wol g" habe ich für (jetzt) eth1 aktiviert
und für den Betrieb nach Neustart in die rc.local eingetragen. Wie man sieht, unterstützt die Karte jetzt WOL:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes
/proc/acpi/wakeup sagt wakeup ist enabled:
Device S-state Status Sysfs node
P0P1 S4 *disabled
USB1 S3 *disabled
USB2 S3 *disabled
USB3 S3 *disabled
USB4 S3 *disabled
USB5 S3 *disabled
USB6 S3 *disabled
USB7 S3 *disabled
RP01 S4 *disabled pci:0000:00:1c.0
PXSX S4 *disabled
RP02 S4 *disabled pci:0000:00:1c.1
PXSX S4 *enabled pci:0000:03:00.0
RP03 S4 *disabled
PXSX S4 *disabled
RP04 S4 *disabled pci:0000:00:1c.3
PXSX S4 *disabled pci:0000:04:00.0
RP05 S4 *disabled pci:0000:00:1c.4
PXSX S4 *enabled pci:0000:06:00.0
RP06 S4 *disabled pci:0000:00:1c.5
PXSX S4 *disabled pci:0000:07:00.0
RP07 S4 *disabled pci:0000:00:1c.6
PXSX S4 *disabled
RP08 S4 *disabled pci:0000:00:1c.7
PXSX S4 *disabled pci:0000:0a:00.0
PEG0 S4 *disabled pci:0000:00:01.0
PEGP S4 *disabled
PEG1 S4 *disabled
PEG2 S4 *disabled
PEG3 S4 *disabled
GLAN S4 *disabled
EHC1 S4 *enabled pci:0000:00:1d.0
EHC2 S4 *enabled pci:0000:00:1a.0
XHC S4 *enabled pci:0000:00:14.0
HDEF S4 *disabled pci:0000:00:1b.0
PWRB S3 *enabled
denn laut lscpi ist 03:00.0 die Netzwerkkarte:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde PRO [Radeon HD 7750 / R7 250E]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
04:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
05:00.0 FireWire (IEEE 1394): NEC Corporation uPD72874 [Firewarden] IEEE1394a OHCI 1.1 Link/3-port PHY Controller (rev 01)
06:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 03)
07:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
08:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
08:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
Und wie gesagt - in der etc/init/halt steht NETDOWN=no
MAC-Adresse habe ich mehrfach verglichen - alles gut. Aber: die Kiste wacht einfach nicht auf. Hat noch jemand eine Idee?
Gruß, Jochen
edit: ich habe mal versucht, im BIOS Wake-up mit keyboard oder Maus einzustellen. Geht auch nicht. Ist es evt. ein Netzteil-Problem?
(Be quiet! Pure Power CM BQT L8-CM-630W). Alle Leitungen zum MB sind jedenfalls angeschlossen.
edit2: ist übrigens egal, ob "Herunterfahren", "Bereitschaft" oder "Ruhezustand" (habe ich extra mal aktiviert) - ändert alles nichts...
und noch ein edit: die LED an der Netzwerkkarte ist aus, egal welcher der Zustände. Realtek-Herstellerteiber habe ich auch installiert - geht aber auch nicht besser.