Anwendungen
Portal
Forum
Wiki
Ikhaya
Planet
Mehr
Anmelden

Jack startet nicht

Hallo,

ich habe ein Problem mit einem frisch installierten Ubuntustudio. Jack will nicht so wie ich will. Er startet nicht oder stürzt sofort wieder ab.

Hier einige Ausgaben:

$ jackd -dfirewire -p1024 -r96000 -n

jackdmp 1.9.8
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2011 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
libffado 2.999.0- built Feb 17 2012 15:54:45
00857219686: Warning (dice_eap.cpp)[1398] read: No routes found. Base 0x7, offset 0x4000
00857245753: Warning (dice_eap.cpp)[ 881] updateNameCache: What is this function about?
 DICE Parameter Space info:
  Global  : offset=0x0028 size=0360
  TX      : offset=0x0190 size=0568
                nb=   1 size=0280
  RX      : offset=0x03C8 size=1128
                nb=   1 size=0280
  UNUSED1 : offset=0x0830 size=0016
  UNUSED2 : offset=0x0000 size=0000
 Global param space:
  Owner            : 0x00000000FFFF0000
  Notification     : 0x00000010
  Nick name        : Pro24-003f6b
  Clock Select     : 0x01 0x0C
  Enable           : false
  Clock Status     : locked 0x01
  Extended Status  : 0x00000000
  Samplerate       : 0x0000AC44 (44100)
  Version          : 0x01000400
  Version          : 0x01000400 (1.0.4.0)
  Clock caps       : 0x112C001E
  Clock sources    :
    AES1
    AES2
    SPDIF-OPT
    SPDIF
    AES_ANY
    ADAT
    ADAT_AUX
    Word Clock
    Unused
    Unused
    Unused
    Unused
    Internal
 TX param space:
  Nb of xmit        : 1
  Transmitter 0:
   ISO channel       :  -1
   ISO speed         :   2
   Nb audio channels :  16
   Nb midi channels  :   1
   AC3 caps          : 0x00000000
   AC3 enable        : 0x00000000
   Channel names     :
     IP 1
     IP 2
     IP 3
     IP 4
     SPDIF L
     SPDIF R
     ADAT 1
     ADAT 2
     ADAT 3
     ADAT 4
     ADAT 5
     ADAT 6
     ADAT 7
     ADAT 8
     Loop 1
     Loop 2
 RX param space:
  Nb of recv        : 1
  Receiver 0:
   ISO channel       :  -1
   Sequence start    :   0
   Nb audio channels :   8
   Nb midi channels  :   1
   AC3 caps          : 0x00000000
   AC3 enable        : 0x00000000
   Channel names     :
     Mon 1
     Mon 2
     Line 3
     Line 4
     Line 5
     Line 6
     SPDIF L
     SPDIF R
firewire ERR: Could not start streaming threads
Cannot start driver
JackServer::Start() failed with -1
Failed to start server

manchmal auch bei selber Eingabe

jackdmp 1.9.8
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2011 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
libffado 2.999.0- built Feb 17 2012 15:54:45
01297088742: Error (configrom.cpp)[ 150] initialize: Could not parse config rom of node 0 on port 0
01297095338: Error (configrom.cpp)[ 150] initialize: Could not parse config rom of node 0 on port 0
firewire ERR: FFADO: Error creating virtual device
Cannot attach audio driver
JackServer::Open() failed with -1
Failed to open server

hier noch die Ausgabe von lshw

tonstuduirack             
    Beschreibung: Arbeitsplatzrechner
    Produkt: To Be Filled By O.E.M. (To Be Filled By O.E.M.)
    Hersteller: To Be Filled By O.E.M.
    Version: To Be Filled By O.E.M.
    Seriennummer: To Be Filled By O.E.M.
    Breite: 64 bits
    Fähigkeiten: smbios-2.4 dmi-2.4 vsyscall32
    Konfiguration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009
  *-core
       Beschreibung: Hauptplatine
       Produkt: N68C-S UCC
       Hersteller: ASRock
       Physische ID: 0
     *-firmware
          Beschreibung: BIOS
          Hersteller: American Megatrends Inc.
          Physische ID: 0
          Version: P1.20
          date: 04/23/2010
          Größe: 64KiB
          Kapazität: 960KiB
          Fähigkeiten: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
     *-cpu
          Beschreibung: CPU
          Produkt: AMD Athlon(tm) II X4 630 Processor
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 3
          Bus-Informationen: cpu@0
          Version: AMD Athlon(tm) II X4 630 Processor
          Seriennummer: To Be Filled By O.E.M.
          Steckplatz: CPUSocket
          Größe: 800MHz
          Kapazität: 2800MHz
          Breite: 64 bits
          Uhr: 200MHz
          Fähigkeiten: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq
        *-cache:0
             Beschreibung: L1 Cache
             Physische ID: 5
             Steckplatz: L1-Cache
             Größe: 512KiB
             Kapazität: 512KiB
             Fähigkeiten: pipeline-burst internal varies data
        *-cache:1
             Beschreibung: L2 Cache
             Physische ID: 6
             Steckplatz: L2-Cache
             Größe: 2MiB
             Kapazität: 2MiB
             Fähigkeiten: pipeline-burst internal varies unified
     *-memory:0
          Beschreibung: Systemspeicher
          Physische ID: e
          Steckplatz: Systemplatine oder Hauptplatine
          Größe: 4GiB
        *-bank:0
             Beschreibung: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2012-05-01 19:42+0000Last-Translator: Hendrik Knackstedt <Unknown>Language-Team: German <de@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2012-05-08 10:38+0000X-Generator: Launchpad (build 15204) Synchron 400 MHz (2,5 ns)
             Produkt: PartNum0
             Hersteller: Manufacturer0
             Physische ID: 0
             Seriennummer: SerNum0
             Steckplatz: DIMM0
             Größe: 2GiB
             Breite: 64 bits
             Uhr: 400MHz (2.5ns)
        *-bank:1
             Beschreibung: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2012-05-01 19:42+0000Last-Translator: Hendrik Knackstedt <Unknown>Language-Team: German <de@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2012-05-08 10:38+0000X-Generator: Launchpad (build 15204) Synchron 400 MHz (2,5 ns)
             Produkt: PartNum1
             Hersteller: Manufacturer1
             Physische ID: 1
             Seriennummer: SerNum1
             Steckplatz: DIMM1
             Größe: 2GiB
             Breite: 64 bits
             Uhr: 400MHz (2.5ns)
     *-memory:1 UNCLAIMED
          Beschreibung: RAM memory
          Produkt: MCP61 Host Bridge
          Hersteller: NVIDIA Corporation
          Physische ID: 4
          Bus-Informationen: pci@0000:00:00.0
          Version: a1
          Breite: 32 bits
          Uhr: 66MHz (15.2ns)
          Fähigkeiten: ht bus_master cap_list
          Konfiguration: latency=0
     *-isa
          Beschreibung: ISA bridge
          Produkt: MCP61 LPC Bridge
          Hersteller: NVIDIA Corporation
          Physische ID: 1
          Bus-Informationen: pci@0000:00:01.0
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: isa bus_master
          Konfiguration: latency=0
          Ressourcen: ioport:900(Größe=256)
     *-serial
          Beschreibung: SMBus
          Produkt: MCP61 SMBus
          Hersteller: NVIDIA Corporation
          Physische ID: 1.1
          Bus-Informationen: pci@0000:00:01.1
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: pm cap_list
          Konfiguration: driver=nForce2_smbus latency=0
          Ressourcen: irq:11 ioport:ec00(Größe=64) ioport:600(Größe=64) ioport:700(Größe=64)
     *-memory:2 UNCLAIMED
          Beschreibung: RAM memory
          Produkt: MCP61 Memory Controller
          Hersteller: NVIDIA Corporation
          Physische ID: 1.2
          Bus-Informationen: pci@0000:00:01.2
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz (15.2ns)
          Konfiguration: latency=0
     *-usb:0
          Beschreibung: USB controller
          Produkt: MCP61 USB 1.1 Controller
          Hersteller: NVIDIA Corporation
          Physische ID: 2
          Bus-Informationen: pci@0000:00:02.0
          Version: a3
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: pm ohci bus_master cap_list
          Konfiguration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
          Ressourcen: irq:23 memory:fbeff000-fbefffff
     *-usb:1
          Beschreibung: USB controller
          Produkt: MCP61 USB 2.0 Controller
          Hersteller: NVIDIA Corporation
          Physische ID: 2.1
          Bus-Informationen: pci@0000:00:02.1
          Version: a3
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: debug pm ehci bus_master cap_list
          Konfiguration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
          Ressourcen: irq:22 memory:fbefec00-fbefecff
     *-pci:0
          Beschreibung: PCI bridge
          Produkt: MCP61 PCI bridge
          Hersteller: NVIDIA Corporation
          Physische ID: 100
          Bus-Informationen: pci@0000:00:04.0
          Version: a1
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: pci ht subtractive_decode bus_master cap_list
          Ressourcen: memory:fbf00000-fbffffff
        *-firewire
             Beschreibung: FireWire (IEEE 1394)
             Produkt: uPD72874 [Firewarden] IEEE1394a OHCI 1.1 Link/3-port PHY Controller
             Hersteller: NEC Corporation
             Physische ID: 8
             Bus-Informationen: pci@0000:01:08.0
             Version: 01
             Breite: 32 bits
             Uhr: 33MHz
             Fähigkeiten: pm ohci bus_master cap_list
             Konfiguration: driver=firewire_ohci latency=32 maxlatency=44 mingnt=20
             Ressourcen: irq:19 memory:fbfff000-fbffffff
     *-multimedia
          Beschreibung: Audio device
          Produkt: MCP61 High Definition Audio
          Hersteller: NVIDIA Corporation
          Physische ID: 5
          Bus-Informationen: pci@0000:00:05.0
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: pm msi ht bus_master cap_list
          Konfiguration: driver=snd_hda_intel latency=0 maxlatency=5 mingnt=2
          Ressourcen: irq:21 memory:fbef8000-fbefbfff
     *-ide:0
          Beschreibung: IDE interface
          Produkt: MCP61 IDE
          Hersteller: NVIDIA Corporation
          Physische ID: 6
          Bus-Informationen: pci@0000:00:06.0
          Logischer Name: scsi4
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: ide pm bus_master cap_list emulated
          Konfiguration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
          Ressourcen: irq:0 ioport:1f0(Größe=8) ioport:3f6 ioport:170(Größe=8) ioport:376 ioport:ffa0(Größe=16)
        *-cdrom:0
             Beschreibung: DVD-RAM writer
             Produkt: DVD-RAM GSA-H55N
             Hersteller: HL-DT-ST
             Physische ID: 0.0.0
             Bus-Informationen: scsi@4:0.0.0
             Logischer Name: /dev/cdrom
             Logischer Name: /dev/cdrw
             Logischer Name: /dev/dvd
             Logischer Name: /dev/dvdrw
             Logischer Name: /dev/sr0
             Version: 1.02
             Seriennummer: [
             Fähigkeiten: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             Konfiguration: ansiversion=5 status=nodisc
        *-cdrom:1
             Beschreibung: DVD reader
             Physische ID: 0.1.0
             Bus-Informationen: scsi@4:0.1.0
             Logischer Name: /dev/cdrom1
             Logischer Name: /dev/dvd1
             Logischer Name: /dev/sr1
             Fähigkeiten: audio dvd
             Konfiguration: status=nodisc
     *-bridge
          Beschreibung: Ethernet interface
          Produkt: MCP61 Ethernet
          Hersteller: NVIDIA Corporation
          Physische ID: 7
          Bus-Informationen: pci@0000:00:07.0
          Logischer Name: eth0
          Version: a2
          Seriennummer: 00:25:22:4e:84:3f
          Größe: 100000000
          Kapazität: 100000000
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
          Konfiguration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.178.41 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100Mbit/s
          Ressourcen: irq:43 memory:fbefd000-fbefdfff ioport:e480(Größe=8)
     *-ide:1
          Beschreibung: IDE interface
          Produkt: MCP61 SATA Controller
          Hersteller: NVIDIA Corporation
          Physische ID: 8
          Bus-Informationen: pci@0000:00:08.0
          Logischer Name: scsi0
          Logischer Name: scsi1
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: ide pm msi ht bus_master cap_list emulated
          Konfiguration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
          Ressourcen: irq:21 ioport:e400(Größe=8) ioport:e080(Größe=4) ioport:e000(Größe=8) ioport:dc00(Größe=4) ioport:d880(Größe=16) memory:fbefc000-fbefcfff
        *-disk:0
             Beschreibung: ATA Disk
             Produkt: WDC WD5000AAKS-0
             Hersteller: Western Digital
             Physische ID: 0
             Bus-Informationen: scsi@0:0.0.0
             Logischer Name: /dev/sda
             Version: 05.0
             Seriennummer: WD-WCATR1610917
             Größe: 465GiB (500GB)
             Fähigkeiten: partitioned partitioned:dos
             Konfiguration: ansiversion=5 signature=00070068
           *-volume:0
                Beschreibung: EXT4-Laufwerk
                Hersteller: Linux
                Physische ID: 1
                Bus-Informationen: scsi@0:0.0.0,1
                Logischer Name: /dev/sda1
                Logischer Name: /
                Version: 1.0
                Seriennummer: 21187c15-16eb-4d12-8ef9-09a6f20c4895
                Größe: 462GiB
                Kapazität: 462GiB
                Fähigkeiten: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
                Konfiguration: created=2012-06-13 13:46:24 filesystem=ext4 lastmountpoint=/ modified=2012-06-13 20:52:51 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-14 10:17:15 state=mounted
           *-volume:1
                Beschreibung: Extended partition
                Physische ID: 2
                Bus-Informationen: scsi@0:0.0.0,2
                Logischer Name: /dev/sda2
                Größe: 3837MiB
                Kapazität: 3837MiB
                Fähigkeiten: primary extended partitioned partitioned:extended
              *-logicalvolume
                   Beschreibung: Linux swap / Solaris partition
                   Physische ID: 5
                   Logischer Name: /dev/sda5
                   Kapazität: 3837MiB
                   Fähigkeiten: nofs
        *-disk:1
             Beschreibung: ATA Disk
             Produkt: WDC WD5000AAKS-0
             Hersteller: Western Digital
             Physische ID: 1
             Bus-Informationen: scsi@1:0.0.0
             Logischer Name: /dev/sdb
             Version: 05.0
             Seriennummer: WD-WCATR1499815
             Größe: 465GiB (500GB)
             Fähigkeiten: partitioned partitioned:dos
             Konfiguration: ansiversion=5 signature=000dbe05
           *-volume
                Beschreibung: EXT4-Laufwerk
                Hersteller: Linux
                Physische ID: 1
                Bus-Informationen: scsi@1:0.0.0,1
                Logischer Name: /dev/sdb1
                Version: 1.0
                Seriennummer: b98ac36c-bc29-4def-a4ac-5a818f1d6a20
                Größe: 465GiB
                Kapazität: 465GiB
                Fähigkeiten: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
                Konfiguration: created=2012-06-13 21:31:36 filesystem=ext4 label=PlatteB modified=2012-06-13 22:47:04 mounted=2012-06-13 21:32:40 state=clean
     *-ide:2
          Beschreibung: IDE interface
          Produkt: MCP61 SATA Controller
          Hersteller: NVIDIA Corporation
          Physische ID: 8.1
          Bus-Informationen: pci@0000:00:08.1
          Version: a2
          Breite: 32 bits
          Uhr: 66MHz
          Fähigkeiten: ide pm msi ht bus_master cap_list
          Konfiguration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
          Ressourcen: irq:20 ioport:d800(Größe=8) ioport:d480(Größe=4) ioport:d400(Größe=8) ioport:d080(Größe=4) ioport:d000(Größe=16) memory:fbef7000-fbef7fff
     *-pci:1
          Beschreibung: PCI bridge
          Produkt: MCP61 PCI Express bridge
          Hersteller: NVIDIA Corporation
          Physische ID: 9
          Bus-Informationen: pci@0000:00:09.0
          Version: a2
          Breite: 32 bits
          Uhr: 33MHz
          Fähigkeiten: pci pm msi ht pciexpress normal_decode bus_master cap_list
          Konfiguration: driver=pcieport
          Ressourcen: irq:40
     *-pci:2
          Beschreibung: PCI bridge
          Produkt: MCP61 PCI Express bridge
          Hersteller: NVIDIA Corporation
          Physische ID: b
          Bus-Informationen: pci@0000:00:0b.0
          Version: a2
          Breite: 32 bits
          Uhr: 33MHz
          Fähigkeiten: pci pm msi ht pciexpress normal_decode bus_master cap_list
          Konfiguration: driver=pcieport
          Ressourcen: irq:41
     *-pci:3
          Beschreibung: PCI bridge
          Produkt: MCP61 PCI Express bridge
          Hersteller: NVIDIA Corporation
          Physische ID: c
          Bus-Informationen: pci@0000:00:0c.0
          Version: a2
          Breite: 32 bits
          Uhr: 33MHz
          Fähigkeiten: pci pm msi ht pciexpress normal_decode bus_master cap_list
          Konfiguration: driver=pcieport
          Ressourcen: irq:42
     *-display
          Beschreibung: VGA compatible controller
          Produkt: C61 [GeForce 7025 / nForce 630a]
          Hersteller: NVIDIA Corporation
          Physische ID: d
          Bus-Informationen: pci@0000:00:0d.0
          Version: a2
          Breite: 64 bits
          Uhr: 66MHz
          Fähigkeiten: pm msi vga_controller bus_master cap_list rom
          Konfiguration: driver=nouveau latency=0
          Ressourcen: irq:22 memory:fa000000-faffffff memory:e0000000-efffffff memory:f9000000-f9ffffff memory:fbec0000-fbedffff
     *-pci:4
          Beschreibung: Host bridge
          Produkt: Family 10h Processor HyperTransport Configuration
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 101
          Bus-Informationen: pci@0000:00:18.0
          Version: 00
          Breite: 32 bits
          Uhr: 33MHz
     *-pci:5
          Beschreibung: Host bridge
          Produkt: Family 10h Processor Address Map
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 102
          Bus-Informationen: pci@0000:00:18.1
          Version: 00
          Breite: 32 bits
          Uhr: 33MHz
     *-pci:6
          Beschreibung: Host bridge
          Produkt: Family 10h Processor DRAM Controller
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 103
          Bus-Informationen: pci@0000:00:18.2
          Version: 00
          Breite: 32 bits
          Uhr: 33MHz
     *-pci:7
          Beschreibung: Host bridge
          Produkt: Family 10h Processor Miscellaneous Control
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 104
          Bus-Informationen: pci@0000:00:18.3
          Version: 00
          Breite: 32 bits
          Uhr: 33MHz
          Konfiguration: driver=k10temp
          Ressourcen: irq:0
     *-pci:8
          Beschreibung: Host bridge
          Produkt: Family 10h Processor Link Control
          Hersteller: Hynix Semiconductor (Hyundai Electronics)
          Physische ID: 105
          Bus-Informationen: pci@0000:00:18.4
          Version: 00
          Breite: 32 bits
          Uhr: 33MHz
     *-scsi
          Physische ID: a
          Bus-Informationen: usb@2:9
          Logischer Name: scsi6
          Fähigkeiten: emulated scsi-host
          Konfiguration: driver=usb-storage
        *-disk:0
             Beschreibung: SCSI Disk
             Physische ID: 0.0.0
             Bus-Informationen: scsi@6:0.0.0
             Logischer Name: /dev/sdc
        *-disk:1
             Beschreibung: SCSI Disk
             Physische ID: 0.0.1
             Bus-Informationen: scsi@6:0.0.1
             Logischer Name: /dev/sdd
        *-disk:2
             Beschreibung: SCSI Disk
             Physische ID: 0.0.2
             Bus-Informationen: scsi@6:0.0.2
             Logischer Name: /dev/sde
        *-disk:3
             Beschreibung: SCSI Disk
             Physische ID: 0.0.3
             Bus-Informationen: scsi@6:0.0.3
             Logischer Name: /dev/sdf

maehrudi schrieb:

$ jackd -dfirewire -p1024 -r96000 -n

Laut „man jack“ ist dieser Treiber nicht möglich. Eventuell willst du ALSA benutzen und darüber Firewire. Das hieße dann aber etwa so:

jackd -dalsa -dfirewire -p1024 -r96000

Wofür soll „-n“ sein?

Obiger String wird wahrscheinlich auch nicht funktionieren, da ALSA kein firewire Device initialisieren kann. Poste mal bitte die Ausgabe von:

cat /proc/asound/cards

dafür. Vielleicht ist dort die Soundkarte vorhanden, die du brauchst.

Das Ziel ist es an den Rechner ein Firewire Interface Focusrite Saffire PRO24 anzuschließen. Dazu brauch ich halt den FFADO/Firewire-Treiber. An einem anderen Rechner läuft das auch schon. Die interne Soundkarte brauch ich da doch eigentlich gar nicht oder?

Was mir eben gar nicht gefällt ist, dass ich Ubuntustudio ganz frisch installiert hab (was ja diese ganzen JACK und FFADO schon mitbringt) und es läuft trotzdem nicht, warum auch immer.

Kann es sein, dass meine Firewire Karte nicht kompatibel ist? Ist eine inLine PCI Firewire Karte Und da steht eigentlich sogar auf der Verpackung dass die Linuxkompatibel ist.

Ich habe aber auch immer wieder total Systemabstürze. Also einfach aus und nix weiter. Kann es sein, dass es in einem größeren Rahmen Fehler gibt?

Benutze ein 64 Bit System, habs auch schon mit 32 Bit versucht, waren die gleichen Fehler.

MisterIgo schrieb:

maehrudi schrieb:

$ jackd -dfirewire -p1024 -r96000 -n

Laut „man jack“ ist dieser Treiber nicht möglich. Eventuell willst du ALSA benutzen und darüber Firewire. Wofür soll „-n“ sein?

Poste mal bitte die Ausgabe von:

cat /proc/asound/cards

dafür. Vielleicht ist dort die Soundkarte vorhanden, die du brauchst.

Das hat gar nichts mit der internen Soundkarte zu tun.

Ok was soll das dann anzeigen? Ich habe grade keinen Zugriff auf den Rechner, aber sobald es geht poste ich da mal die Ausgabe

1. ffado ist ein externes Modul, und ist deswegen nicht in den Jack manpages drin. es stellt den jack "treiber" -dfirewire, und dokumentiert ihn glaube ich selbst.

2. /proc/asound/cards hat nix mit ffado/firewire zu tun. noch nicht....

3. jackd -dfirewire -p1024 -r96000 -n

hast du hinter den "-n" die zahl der Puffer angegeben, oder ist der Befehl durch copy & paste abgeschnitten? "-n2" oder "-n3" wären da gute Ideen.

TraumFlug schrieb:

1. ffado ist ein externes Modul, und ist deswegen nicht in den Jack manpages drin. es stellt den jack "treiber" -dfirewire, und dokumentiert ihn glaube ich selbst.

2. /proc/asound/cards hat nix mit ffado/firewire zu tun. noch nicht....

Ok, das Modul kannte ich nicht. Ich dachte, das wäre eine externe Soundkarte die ganz normal über ALSA erkannt und angesprochen werden muss.