Hallo,
ich habe einen Schenker XMG P705 mit Ubuntu Gnome 14.04.
Das Problem: Die Lautsprecher funktionieren. Stecke ich die Kopfhörer rein, werden diese nicht erkannt und die Ausgabe erfolgt weiterhin auf den Lautsprechern.
Ich bin ein absoluter Laie, habe mich aber schon mit dem Wiki beschäftigt und habe hiernach http://wiki.ubuntuusers.de/Sound_Problembehebung/Audio-Fehler-Beschreibung folgendes zusammengestellt:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 | $ lsb_release -d Description: Ubuntu 14.04.2 LTS $ uname -r 3.16.0-37-generic $ grep "^audio" /etc/group | grep "$USER" | wc -l 0 $ lspci -nnk | grep -iA2 audio 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) Subsystem: CLEVO/KAPOK Computer Device [1558:6557] Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05) Subsystem: CLEVO/KAPOK Computer Device [1558:6557] Kernel driver in use: snd_hda_intel $ lsmod | grep "snd" snd_hda_codec_realtek 77467 1 snd_hda_codec_generic 68972 1 snd_hda_codec_realtek snd_hda_codec_hdmi 47548 1 snd_soc_rt5640 93042 0 snd_soc_rl6231 13037 1 snd_soc_rt5640 snd_hda_intel 30469 5 snd_hda_controller 30228 1 snd_hda_intel snd_soc_core 200204 1 snd_soc_rt5640 snd_hda_codec 139682 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller snd_hwdep 17698 1 snd_hda_codec snd_compress 19200 1 snd_soc_core snd_pcm_dmaengine 15172 1 snd_soc_core snd_pcm 104112 7 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcm_dmaengine snd_seq_midi 13564 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30876 1 snd_seq_midi snd_seq 63074 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29562 2 snd_pcm,snd_seq snd 79468 23 snd_hda_codec_realtek,snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_compress snd_soc_sst_acpi 13007 0 soundcore 15047 2 snd,snd_hda_codec $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7a14000 irq 50 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7a10000 irq 51 $ head -n 3 /proc/asound/card0/codec#0 Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) $ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0 head: »/proc/asound/card0/codec97#0/ac97#0-0“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden $ head -n 3 /proc/asound/card0/codec97#0/ac97#0-0+regs head: »/proc/asound/card0/codec97#0/ac97#0-0+regs“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden $ head -n 3 /proc/asound/card1/codec#0 Codec: Realtek ALC892 Address: 0 AFG Function Id: 0x1 (unsol 1) $ head -n 3 /proc/asound/card1/codec97#0/ac97#0-0 head: »/proc/asound/card1/codec97#0/ac97#0-0“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden $ head -n 3 /proc/asound/card1/codec97#0/ac97#0-0+regs head: »/proc/asound/card1/codec97#0/ac97#0-0+regs“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden $ aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 1: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 1: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 $ aplay /usr/share/sounds/alsa/Noise.wav Wiedergabe: WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono $ cat ~/.asoundrc cat: /home/alex/.asoundrc: Datei oder Verzeichnis nicht gefunden $ cat /etc/asound.conf cat: /etc/asound.conf: Datei oder Verzeichnis nicht gefunden $ cat ~/.asoundrc.asoundconf cat: /home/alex/.asoundrc.asoundconf: Datei oder Verzeichnis nicht gefunden $ ps -C esd PID TTY TIME CMD $ ps -C arts PID TTY TIME CMD $ ps -C pulseaudio PID TTY TIME CMD 2095 ? 00:00:00 pulseaudio $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-37-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #51~14.04.1-Ubuntu SMP Wed May 6 15:23:14 UTC 2015 (Ubuntu 3.16.0-37.51~14.04.1-generic 3.16.7-ckt9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic root=UUID=b3693bb5-c708-499f-9390-0662a8c31f09 ro persistent quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b80d6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b80d7000-0x00000000b80ddfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b80de000-0x00000000b892ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8930000-0x00000000b8bedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9633fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9634000-0x00000000c97aafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: XMG XMG P505/XMG P505, BIOS 1.03.04 02/24/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0120000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable [ 0.000000] 7 base 012FE00000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB [ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 5, base: 3264MB, range: 64MB, type UC [ 0.000000] reg 6, base: 3248MB, range: 16MB, type UC [ 0.000000] reg 7, base: 4862MB, range: 2MB, type UC [ 0.000000] total RAM covered: 4014M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 8 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3200MB, range: 32MB, type WB [ 0.000000] reg 4, base: 3232MB, range: 16MB, type WB [ 0.000000] reg 5, base: 4GB, range: 512MB, type WB [ 0.000000] reg 6, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 7, base: 4862MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff8800000fd900] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12fc00000-0x12fdfffff] [ 0.000000] [mem 0x12fc00000-0x12fdfffff] page 2M [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fbfffff] [ 0.000000] [mem 0x12c000000-0x12fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff] [ 0.000000] [mem 0x100000000-0x12bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb80d6fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xb7ffffff] page 2M [ 0.000000] [mem 0xb8000000-0xb80d6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb80de000-0xb892ffff] [ 0.000000] [mem 0xb80de000-0xb81fffff] page 4k [ 0.000000] [mem 0xb8200000-0xb87fffff] page 2M [ 0.000000] [mem 0xb8800000-0xb892ffff] page 4k [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb8bee000-0xc8c0afff] [ 0.000000] [mem 0xb8bee000-0xb8bfffff] page 4k [ 0.000000] [mem 0xb8c00000-0xc8bfffff] page 2M [ 0.000000] [mem 0xc8c00000-0xc8c0afff] page 4k [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xc910b000-0xc9633fff] [ 0.000000] [mem 0xc910b000-0xc91fffff] page 4k [ 0.000000] [mem 0xc9200000-0xc95fffff] page 2M [ 0.000000] [mem 0xc9600000-0xc9633fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc9fff000-0xc9ffffff] [ 0.000000] [mem 0xc9fff000-0xc9ffffff] page 4k [ 0.000000] RAMDISK: [mem 0x35ada000-0x36d64fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000C973C090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000C974E0D0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000C973C1D0 011EFC (v02 ALASKA A M I 00000038 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000C97AAF80 000040 [ 0.000000] ACPI: APIC 0x00000000C974E1E0 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000C974E278 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000C974E2C0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000C974E360 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000C974E408 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711) [ 0.000000] ACPI: TPM2 0x00000000C974F3A0 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: SSDT 0x00000000C974F3D8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C974F918 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000C97503F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000C9750430 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000C9750468 000315 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C9750780 001C47 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000C97523C8 00113B (v01 SgRef SgPeg 00001000 INTL 20120711) [ 0.000000] ACPI: DMAR 0x00000000C9753508 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000C97535C0 001CB6 (v01 OptRef OptTabl 00001000 INTL 20120711) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fdfffff] [ 0.000000] NODE_DATA [mem 0x12fdf4000-0x12fdf8fff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b400000-ffff88012f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x12fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xb80d6fff] [ 0.000000] node 0: [mem 0xb80de000-0xb892ffff] [ 0.000000] node 0: [mem 0xb8bee000-0xc8c0afff] [ 0.000000] node 0: [mem 0xc910b000-0xc9633fff] [ 0.000000] node 0: [mem 0xc9fff000-0xc9ffffff] [ 0.000000] node 0: [mem 0x100000000-0x12fdfffff] [ 0.000000] On node 0 totalpages: 1018892 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12794 pages used for memmap [ 0.000000] DMA32 zone: 818800 pages, LIFO batch:31 [ 0.000000] Normal zone: 3064 pages used for memmap [ 0.000000] Normal zone: 196096 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xcb200000-0xcf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb80d7000-0xb80ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8930000-0xb8bedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8c0b000-0xc910afff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9634000-0xc97aafff] [ 0.000000] PM: Registered nosave memory: [mem 0xc97ab000-0xc9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fa00000 s81408 r8192 d20992 u262144 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002949 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic root=UUID=b3693bb5-c708-499f-9390-0662a8c31f09 ro persistent quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3907604K/4075568K available (7624K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 167964K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.055 MHz processor [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.11 BogoMIPS (lpj=10376220) [ 0.000023] pid_max: default: 32768 minimum: 301 [ 0.000028] ACPI: Core revision 20140424 [ 0.009378] ACPI: All ACPI Tables successfully acquired [ 0.019858] Security Framework initialized [ 0.019873] AppArmor: AppArmor initialized [ 0.019874] Yama: becoming mindful. [ 0.020066] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.020863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021234] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.021237] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.021395] Initializing cgroup subsys memory [ 0.021410] Initializing cgroup subsys devices [ 0.021414] Initializing cgroup subsys freezer [ 0.021416] Initializing cgroup subsys net_cls [ 0.021419] Initializing cgroup subsys blkio [ 0.021421] Initializing cgroup subsys perf_event [ 0.021422] Initializing cgroup subsys net_prio [ 0.021427] Initializing cgroup subsys hugetlb [ 0.021443] CPU: Physical Processor ID: 0 [ 0.021443] CPU: Processor Core ID: 0 [ 0.021447] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.021447] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.022189] mce: CPU supports 9 MCE banks [ 0.022199] CPU0: Thermal monitoring enabled (TM1) [ 0.022208] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.022208] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.022208] tlb_flushall_shift: 6 [ 0.022291] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.022956] ftrace: allocating 29244 entries in 115 pages [ 0.031364] dmar: Host address width 39 [ 0.031366] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.031372] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.031373] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.031376] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.031377] dmar: RMRR base: 0x000000c9e72000 end: 0x000000c9e80fff [ 0.031378] dmar: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff [ 0.031443] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.031443] HPET id 0 under DRHD base 0xfed91000 [ 0.031444] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.031561] Enabled IRQ remapping in x2apic mode [ 0.031562] Enabling x2apic [ 0.031563] Enabled x2apic [ 0.031567] Switched APIC routing to cluster x2apic. [ 0.031981] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071690] smpboot: CPU0: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz (fam: 06, model: 3c, stepping: 03) [ 0.071695] TSC deadline timer enabled [ 0.071712] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.071725] ... version: 3 [ 0.071725] ... bit width: 48 [ 0.071726] ... generic registers: 4 [ 0.071727] ... value mask: 0000ffffffffffff [ 0.071727] ... max period: 0000ffffffffffff [ 0.071728] ... fixed-purpose events: 3 [ 0.071728] ... event mask: 000000070000000f [ 0.072910] x86: Booting SMP configuration: [ 0.072911] .... node #0, CPUs: #1 [ 0.086694] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.086747] #2 #3 #4 #5 #6 #7 [ 0.169850] x86: Booted up 1 node, 8 CPUs [ 0.169853] smpboot: Total of 8 processors activated (41504.88 BogoMIPS) [ 0.175527] devtmpfs: initialized [ 0.177703] evm: security.selinux [ 0.177704] evm: security.SMACK64 [ 0.177705] evm: security.SMACK64EXEC [ 0.177705] evm: security.SMACK64TRANSMUTE [ 0.177706] evm: security.SMACK64MMAP [ 0.177706] evm: security.ima [ 0.177707] evm: security.capability [ 0.177742] PM: Registering ACPI NVS region [mem 0xb80d7000-0xb80ddfff] (28672 bytes) [ 0.177743] PM: Registering ACPI NVS region [mem 0xc9634000-0xc97aafff] (1536000 bytes) [ 0.178278] pinctrl core: initialized pinctrl subsystem [ 0.178319] regulator-dummy: no parameters [ 0.178347] RTC time: 18:48:30, date: 05/16/15 [ 0.178381] NET: Registered protocol family 16 [ 0.178476] cpuidle: using governor ladder [ 0.178478] cpuidle: using governor menu [ 0.178514] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.178515] ACPI: bus type PCI registered [ 0.178516] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.178559] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.178560] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.178613] PCI: Using configuration type 1 for base access [ 0.179651] ACPI: Added _OSI(Module Device) [ 0.179652] ACPI: Added _OSI(Processor Device) [ 0.179653] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.179653] ACPI: Added _OSI(Processor Aggregator Device) [ 0.182421] ACPI: Executed 1 blocks of module-level executable AML code [ 0.192093] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.199493] ACPI: Dynamic OEM Table Load: [ 0.199498] ACPI: SSDT 0xFFFF8801297D8C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.203597] ACPI: Dynamic OEM Table Load: [ 0.203602] ACPI: SSDT 0xFFFF880129328000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.207491] ACPI: Dynamic OEM Table Load: [ 0.207495] ACPI: SSDT 0xFFFF880129324200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.219623] ACPI: Interpreter enabled [ 0.219629] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.219633] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.219646] ACPI: (supports S0 S3 S4 S5) [ 0.219647] ACPI: Using IOAPIC for interrupt routing [ 0.219668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.224413] ACPI: Power Resource [NVP3] (on) [ 0.224429] ACPI: Power Resource [NVP2] (on) [ 0.228241] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.228246] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.228422] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.228520] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.228919] PCI host bridge to bus 0000:00 [ 0.228921] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.228922] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.228923] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.228924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.228925] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.228926] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.228926] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.228927] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.228928] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.228929] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff] [ 0.228934] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.228995] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.229020] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.229052] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.229078] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.229085] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.229090] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.229093] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.229145] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.229150] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit] [ 0.229224] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.229240] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit] [ 0.229293] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.229322] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.229347] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.229364] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit] [ 0.229420] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.229480] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.229497] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff] [ 0.229576] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.229614] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.229641] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.229655] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit] [ 0.229715] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.229744] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.229770] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.229836] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.229868] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.229892] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.229952] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.229982] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.230005] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 0.230065] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.230095] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.230125] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.230143] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff] [ 0.230223] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.230260] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.230286] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 0.230423] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.230436] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.230443] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.230449] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.230456] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.230462] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.230469] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff] [ 0.230501] pci 0000:00:1f.2: PME# supported from D3hot [ 0.230548] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.230560] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit] [ 0.230578] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.230665] pci 0000:01:00.0: [10de:13d9] type 00 class 0x030200 [ 0.230672] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.230679] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.230685] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.230689] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.230694] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.230728] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.236752] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.236754] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.236756] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.236759] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.236827] acpiphp: Slot [1] registered [ 0.236833] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.236919] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.236939] pci 0000:03:00.0: reg 0x10: [mem 0xf7915000-0xf7915fff] [ 0.237002] pci 0000:03:00.0: reg 0x30: [mem 0xf7900000-0xf790ffff pref] [ 0.237087] pci 0000:03:00.0: supports D1 D2 [ 0.237088] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.237121] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.237161] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000 [ 0.237180] pci 0000:03:00.1: reg 0x10: [io 0xd000-0xd0ff] [ 0.237208] pci 0000:03:00.1: reg 0x18: [mem 0xf7914000-0xf7914fff 64bit] [ 0.237225] pci 0000:03:00.1: reg 0x20: [mem 0xf7910000-0xf7913fff 64bit] [ 0.237315] pci 0000:03:00.1: supports D1 D2 [ 0.237316] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244773] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.244777] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.244780] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.244900] pci 0000:04:00.0: [8086:08b3] type 00 class 0x028000 [ 0.244953] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf7801fff 64bit] [ 0.245191] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.245244] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.252795] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.252800] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.252838] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.253492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.253530] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.253566] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.253602] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.253637] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.253672] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.253709] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.253744] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.254011] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.254040] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.254118] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.254120] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.254121] vgaarb: loaded [ 0.254122] vgaarb: bridge control possible 0000:00:02.0 [ 0.254266] SCSI subsystem initialized [ 0.254295] libata version 3.00 loaded. [ 0.254311] ACPI: bus type USB registered [ 0.254323] usbcore: registered new interface driver usbfs [ 0.254328] usbcore: registered new interface driver hub [ 0.254349] usbcore: registered new device driver usb [ 0.254431] PCI: Using ACPI for IRQ routing [ 0.255652] PCI: pci_cache_line_size set to 64 bytes [ 0.255692] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.255693] e820: reserve RAM buffer [mem 0xb80d7000-0xbbffffff] [ 0.255694] e820: reserve RAM buffer [mem 0xb8930000-0xbbffffff] [ 0.255695] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff] [ 0.255696] e820: reserve RAM buffer [mem 0xc9634000-0xcbffffff] [ 0.255697] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff] [ 0.255697] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff] [ 0.255762] NetLabel: Initializing [ 0.255763] NetLabel: domain hash size = 128 [ 0.255763] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.255770] NetLabel: unlabeled traffic allowed by default [ 0.255813] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.255816] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.258849] Switched to clocksource hpet [ 0.262630] AppArmor: AppArmor Filesystem Enabled [ 0.262647] pnp: PnP ACPI init [ 0.262655] ACPI: bus type PNP registered [ 0.262699] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.262701] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.262882] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.262883] system 00:01: [io 0xffff] has been reserved [ 0.262884] system 00:01: [io 0xffff] has been reserved [ 0.262885] system 00:01: [io 0xffff] has been reserved [ 0.262886] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.262888] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.262889] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.262890] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.262891] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.262892] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.262893] system 00:01: [io 0x3322-0x3323] has been reserved [ 0.262895] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262915] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.262944] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.262946] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.262965] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.263014] pnp 00:05: Plug and Play ACPI device, IDs SYN1214 PNP0f13 (active) [ 0.263041] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.263043] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.263281] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.263282] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.263283] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.263285] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.263286] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.263287] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.263288] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.263289] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.263290] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.263291] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.263292] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved [ 0.263293] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved [ 0.263294] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.263430] pnp: PnP ACPI: found 8 devices [ 0.263431] ACPI: bus type PNP unregistered [ 0.269253] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.269255] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.269256] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.269270] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.269271] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.269272] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.269275] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff] [ 0.269279] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.269281] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.269283] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.269284] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.269286] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.269288] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.269290] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.269292] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.269296] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff] [ 0.269300] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.269305] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.269307] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.269311] pci 0000:00:1c.4: bridge window [mem 0xf7900000-0xf79fffff] [ 0.269317] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.269321] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff] [ 0.269327] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.269328] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.269329] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.269330] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.269331] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.269332] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.269333] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] [ 0.269334] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff] [ 0.269335] pci_bus 0000:00: resource 12 [mem 0xcf200000-0xfeafffff] [ 0.269336] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.269336] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.269337] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.269338] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.269339] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff] [ 0.269340] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref] [ 0.269341] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.269342] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.269343] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.269361] NET: Registered protocol family 2 [ 0.269477] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.269537] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.269623] TCP: Hash tables configured (established 32768 bind 32768) [ 0.269639] TCP: reno registered [ 0.269643] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.269657] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.269694] NET: Registered protocol family 1 [ 0.269704] pci 0000:00:02.0: Video device with shadowed ROM [ 0.270010] PCI: CLS 64 bytes, default 64 [ 0.270043] Trying to unpack rootfs image as initramfs... [ 0.468005] Freeing initrd memory: 18988K (ffff880035ada000 - ffff880036d65000) [ 0.468039] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.468041] software IO TLB [mem 0xc4c0b000-0xc8c0b000] (64MB) mapped at [ffff8800c4c0b000-ffff8800c8c0afff] [ 0.468258] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.468298] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468304] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468307] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468312] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468318] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468323] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468329] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468334] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c [ 0.468367] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.468382] Scanning for low memory corruption every 60 seconds [ 0.468613] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.468637] Initialise system trusted keyring [ 0.468654] audit: initializing netlink subsys (disabled) [ 0.468663] audit: type=2000 audit(1431802110.448:1): initialized [ 0.468894] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.469806] zpool: loaded [ 0.469808] zbud: loaded [ 0.469929] VFS: Disk quotas dquot_6.5.2 [ 0.469954] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.470283] fuse init (API version 7.23) [ 0.470345] msgmni has been set to 7669 [ 0.470392] Key type big_key registered [ 0.470698] Key type asymmetric registered [ 0.470699] Asymmetric key parser 'x509' registered [ 0.470720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.470764] io scheduler noop registered [ 0.470766] io scheduler deadline registered (default) [ 0.470794] io scheduler cfq registered [ 0.470926] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.471195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.471204] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.471236] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.471236] vesafb: scrolling: redraw [ 0.471237] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.471252] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004800000, using 8128k, total 8128k [ 0.471311] Console: switching to colour frame buffer device 240x67 [ 0.471326] fb0: VESA VGA frame buffer device [ 0.471341] intel_idle: MWAIT substates: 0x42120 [ 0.471342] intel_idle: v0.4 model 0x3C [ 0.471342] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.471610] ACPI: AC Adapter [AC] (on-line) [ 0.471680] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.471683] ACPI: Power Button [PWRB] [ 0.471703] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.471704] ACPI: Sleep Button [SLPB] [ 0.471726] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.471740] ACPI: Lid Switch [LID0] [ 0.471761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.471762] ACPI: Power Button [PWRF] [ 0.472007] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.472008] ACPI: Thermal Zone [TZ0] (25 C) [ 0.472027] GHES: HEST is not enabled! [ 0.472082] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.472354] ACPI: Battery Slot [BAT0] (battery present) [ 0.473115] Linux agpgart interface v0.103 [ 0.473859] brd: module loaded [ 0.474247] loop: module loaded [ 0.474389] libphy: Fixed MDIO Bus: probed [ 0.474392] tun: Universal TUN/TAP device driver, 1.6 [ 0.474393] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.474419] PPP generic driver version 2.4.2 [ 0.474448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.474452] ehci-pci: EHCI PCI platform driver [ 0.474518] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.474522] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.474532] ehci-pci 0000:00:1a.0: debug port 2 [ 0.478427] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.478442] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000 [ 0.486998] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.487026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.487028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.487029] usb usb1: Product: EHCI Host Controller [ 0.487030] usb usb1: Manufacturer: Linux 3.16.0-37-generic ehci_hcd [ 0.487031] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.487120] hub 1-0:1.0: USB hub found [ 0.487124] hub 1-0:1.0: 2 ports detected [ 0.487284] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.487287] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.487297] ehci-pci 0000:00:1d.0: debug port 2 [ 0.491190] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.491211] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000 [ 0.503012] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.503034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.503035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.503036] usb usb2: Product: EHCI Host Controller [ 0.503037] usb usb2: Manufacturer: Linux 3.16.0-37-generic ehci_hcd [ 0.503038] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.503140] hub 2-0:1.0: USB hub found [ 0.503143] hub 2-0:1.0: 2 ports detected [ 0.503232] ehci-platform: EHCI generic platform driver [ 0.503242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.503246] ohci-pci: OHCI PCI platform driver [ 0.503256] ohci-platform: OHCI generic platform driver [ 0.503264] uhci_hcd: USB Universal Host Controller Interface driver [ 0.503348] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.503351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.503436] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.503453] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X [ 0.503496] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.503497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.503498] usb usb3: Product: xHCI Host Controller [ 0.503499] usb usb3: Manufacturer: Linux 3.16.0-37-generic xhci_hcd [ 0.503500] usb usb3: SerialNumber: 0000:00:14.0 [ 0.503598] hub 3-0:1.0: USB hub found [ 0.503610] hub 3-0:1.0: 14 ports detected [ 0.505761] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.505762] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.505782] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.505783] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.505784] usb usb4: Product: xHCI Host Controller [ 0.505784] usb usb4: Manufacturer: Linux 3.16.0-37-generic xhci_hcd [ 0.505785] usb usb4: SerialNumber: 0000:00:14.0 [ 0.505872] hub 4-0:1.0: USB hub found [ 0.505879] hub 4-0:1.0: 6 ports detected [ 0.506538] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 0.510643] i8042: Detected active multiplexing controller, rev 1.1 [ 0.512989] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.512991] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.513006] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.513028] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.513040] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.513126] mousedev: PS/2 mouse device common for all mice [ 0.513311] rtc_cmos 00:02: RTC can wake from S4 [ 0.513411] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.513444] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.513489] device-mapper: uevent: version 1.0.3 [ 0.513548] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.513557] Intel P-state driver initializing. [ 0.513585] Intel pstate controlling: cpu 0 [ 0.513636] Intel pstate controlling: cpu 1 [ 0.513646] Intel pstate controlling: cpu 2 [ 0.513671] Intel pstate controlling: cpu 3 [ 0.513701] Intel pstate controlling: cpu 4 [ 0.513741] Intel pstate controlling: cpu 5 [ 0.513765] Intel pstate controlling: cpu 6 [ 0.513805] Intel pstate controlling: cpu 7 [ 0.513818] Consider also installing thermald for improved thermal control. [ 0.513831] ledtrig-cpu: registered to indicate activity on CPUs [ 0.513887] TCP: cubic registered [ 0.513953] NET: Registered protocol family 10 [ 0.514180] NET: Registered protocol family 17 [ 0.514201] Key type dns_resolver registered [ 0.514486] Loading compiled-in X.509 certificates [ 0.515071] Loaded X.509 cert 'Magrathea: Glacier signing key: 74de3406b3cb2f7f397733d75963195680cd9ed5' [ 0.515080] registered taskstats version 1 [ 0.516550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.516616] Key type trusted registered [ 0.519484] Key type encrypted registered [ 0.519490] AppArmor: AppArmor sha1 policy hashing enabled [ 0.519494] ima: No TPM chip found, activating TPM-bypass! [ 0.519512] evm: HMAC attrs: 0x1 [ 0.520014] Magic number: 15:891:847 [ 0.520115] rtc_cmos 00:02: setting system clock to 2015-05-16 18:48:31 UTC (1431802111) [ 0.520180] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.520181] EDD information not available. [ 0.520234] PM: Hibernation image not present or could not be loaded. [ 0.520860] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000) [ 0.520861] Write protecting the kernel read-only data: 12288k [ 0.521912] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000) [ 0.522672] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000) [ 0.531031] systemd-udevd[142]: starting version 204 [ 0.541680] sdhci: Secure Digital Host Controller Interface driver [ 0.541682] sdhci: Copyright(c) Pierre Ossman [ 0.546785] rtsx_pci 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.546799] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44 [ 0.548122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.548128] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control [ 0.548545] ahci 0000:00:1f.2: version 3.0 [ 0.548656] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 0.548684] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.548708] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode [ 0.548711] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.555441] r8169 0000:03:00.1: irq 46 for MSI/MSI-X [ 0.555590] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc9000479c000, 80:fa:5b:11:79:46, XID 1c800800 IRQ 46 [ 0.555592] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.563530] scsi0 : ahci [ 0.563622] scsi1 : ahci [ 0.563700] scsi2 : ahci [ 0.563776] scsi3 : ahci [ 0.563863] scsi4 : ahci [ 0.563949] scsi5 : ahci [ 0.563987] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 45 [ 0.563988] ata2: DUMMY [ 0.563990] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 45 [ 0.563991] ata4: DUMMY [ 0.563992] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 45 [ 0.563993] ata6: DUMMY [ 0.799271] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.883281] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.884226] ata1.00: ATA-9: CT500BX100SSD1, MU01, max UDMA/133 [ 0.884228] ata1.00: 976773168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 0.884741] ata1.00: configured for UDMA/133 [ 0.884888] scsi 0:0:0:0: Direct-Access ATA CT500BX100SSD1 MU01 PQ: 0 ANSI: 5 [ 0.885173] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.885195] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.885422] sd 0:0:0:0: [sda] Write Protect is off [ 0.885425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.885512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.885984] sda: sda1 [ 0.886238] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.931635] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 0.931636] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.931921] hub 1-1:1.0: USB hub found [ 0.932007] hub 1-1:1.0: 6 ports detected [ 1.074704] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.203498] ata3: SATA link down (SStatus 0 SControl 300) [ 1.203840] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.203843] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.204106] hub 2-1:1.0: USB hub found [ 1.204208] hub 2-1:1.0: 8 ports detected [ 1.371605] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.501302] usb 3-3: New USB device found, idVendor=1c7a, idProduct=0603 [ 1.501305] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.501306] usb 3-3: Product: EgisTec_ES603 [ 1.501308] usb 3-3: Manufacturer: EgisTec [ 1.523660] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.524115] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.524118] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.524120] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.524348] ata5.00: supports DRM functions and may not be fully accessible [ 1.524726] ata5.00: ATA-10: Crucial_CT250MX200SSD4, MU01, max UDMA/133 [ 1.524727] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.525929] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.525931] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.525933] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.526158] ata5.00: supports DRM functions and may not be fully accessible [ 1.527754] ata5.00: configured for UDMA/133 [ 1.527890] scsi 4:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5 [ 1.528160] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.528161] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.528163] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 1.528315] sd 4:0:0:0: [sdb] Write Protect is off [ 1.528317] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.528404] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.528979] sdb: sdb1 sdb2 < sdb5 > [ 1.529250] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.530199] tsc: Refined TSC clocksource calibration: 2593.993 MHz [ 1.552399] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.667760] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 1.674723] random: init urandom read with 54 bits of entropy available [ 1.690563] init: plymouth-upstart-bridge main process (226) terminated with status 1 [ 1.690571] init: plymouth-upstart-bridge main process ended, respawning [ 1.693682] init: plymouth-upstart-bridge main process (236) terminated with status 1 [ 1.693688] init: plymouth-upstart-bridge main process ended, respawning [ 1.695399] init: plymouth-upstart-bridge main process (240) terminated with status 1 [ 1.695405] init: plymouth-upstart-bridge main process ended, respawning [ 1.696335] init: plymouth-upstart-bridge main process (243) terminated with status 1 [ 1.696341] init: plymouth-upstart-bridge main process ended, respawning [ 1.697683] init: plymouth-upstart-bridge main process (244) terminated with status 1 [ 1.697692] init: plymouth-upstart-bridge main process ended, respawning [ 1.870583] random: nonblocking pool is initialized [ 1.874471] usb 3-4: New USB device found, idVendor=8087, idProduct=07dc [ 1.874473] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.875078] Adding 9999356k swap on /dev/sdb5. Priority:-1 extents:1 across:9999356k SSFS [ 1.933997] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400, board id: 1474, fw id: 793787 [ 1.940999] systemd-udevd[367]: starting version 204 [ 1.974921] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 1.977459] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 1.978615] lp: driver loaded but no devices found [ 1.984987] ppdev: user-space parallel port driver [ 1.990681] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 1.994099] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.999203] [drm] Initialized drm 1.1.0 20060810 [ 2.001309] wmi: Mapper loaded [ 2.003073] hidraw: raw HID events driver (C) Jiri Kosina [ 2.024628] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.039977] usb 3-6: new full-speed USB device number 4 using xhci_hcd [ 2.095513] audit: type=1400 audit(1431802113.068:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=531 comm="apparmor_parser" [ 2.095519] audit: type=1400 audit(1431802113.068:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 2.095522] audit: type=1400 audit(1431802113.068:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 2.095861] audit: type=1400 audit(1431802113.068:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 2.095867] audit: type=1400 audit(1431802113.068:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 2.096082] audit: type=1400 audit(1431802113.072:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 2.098850] cfg80211: Calling CRDA to update world regulatory domain [ 2.104108] [drm] Memory usable by graphics device = 2048M [ 2.104112] checking generic (d0000000 7f0000) vs hw (d0000000 10000000) [ 2.104113] fb: switching to inteldrmfb from VESA VGA [ 2.104146] Console: switching to colour dummy device 80x25 [ 2.104228] [drm] Replacing VGA console driver [ 2.118929] AVX2 version of gcm_enc/dec engaged. [ 2.124848] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 2.124850] Copyright(c) 2003- 2014 Intel Corporation [ 2.125021] iwlwifi 0000:04:00.0: irq 48 for MSI/MSI-X [ 2.128618] iwlwifi 0000:04:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm [ 2.132441] MXM: GUID detected in BIOS [ 2.132528] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 2.132603] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 2.132756] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 2.132758] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 2.135294] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 2.135302] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.135303] [drm] Driver supports precise vblank timestamp query. [ 2.135327] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.136869] cfg80211: World regulatory domain updated: [ 2.136871] cfg80211: DFS Master region: unset [ 2.136872] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2.136874] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2.136876] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2.136877] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2.136878] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2.136879] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2.149312] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 [ 2.156788] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 2.157012] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 2.170711] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b [ 2.170715] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.170717] usb 3-6: Product: USB Receiver [ 2.170718] usb 3-6: Manufacturer: Logitech [ 2.174669] intel_rapl: Found RAPL domain package [ 2.174673] intel_rapl: Found RAPL domain core [ 2.174675] intel_rapl: Found RAPL domain uncore [ 2.174677] intel_rapl: Found RAPL domain dram [ 2.181686] [drm] VBT doesn't support DRRS [ 2.217673] Bluetooth: Core ver 2.19 [ 2.217690] NET: Registered protocol family 31 [ 2.217691] Bluetooth: HCI device and connection manager initialized [ 2.217697] Bluetooth: HCI socket layer initialized [ 2.217698] Bluetooth: L2CAP socket layer initialized [ 2.217705] Bluetooth: SCO socket layer initialized [ 2.220612] Bluetooth: RFCOMM TTY layer initialized [ 2.220624] Bluetooth: RFCOMM socket layer initialized [ 2.220628] Bluetooth: RFCOMM ver 1.11 [ 2.220646] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.220649] Bluetooth: BNEP filters: protocol multicast [ 2.220652] Bluetooth: BNEP socket layer initialized [ 2.231640] init: failsafe main process (698) killed by TERM signal [ 2.260588] audit: type=1400 audit(1431802113.236:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=824 comm="apparmor_parser" [ 2.260592] audit: type=1400 audit(1431802113.236:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=824 comm="apparmor_parser" [ 2.260819] audit: type=1400 audit(1431802113.236:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=824 comm="apparmor_parser" [ 2.268357] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 2.279793] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.282475] init: cups main process (826) killed by HUP signal [ 2.282485] init: cups main process ended, respawning [ 2.286487] fbcon: inteldrmfb (fb0) is primary device [ 2.286553] Console: switching to colour frame buffer device 240x67 [ 2.286572] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.286573] i915 0000:00:02.0: registered panic notifier [ 2.316719] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 2.316741] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 2.316779] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:51/LNXVIDEO:00/input/input13 [ 2.316870] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.316942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14 [ 2.317024] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.317274] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x124190a1 [ 2.317277] nouveau E[ DRM] failed to create 0x80000080, -22 [ 2.317416] nouveau: probe of 0000:01:00.0 failed with error -22 [ 2.318336] systemd-udevd[391]: Failed to apply ACL on /dev/dri/card1: No such file or directory [ 2.319554] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [ 2.320144] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 2.330675] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 2.330756] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 2.330838] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 2.334380] r8169 0000:03:00.1 eth0: link down [ 2.334430] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.336159] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 2.336387] iwlwifi 0000:04:00.0: L1 Disabled - LTR Enabled [ 2.339308] sound hdaudioC1D0: ignore pin 0x1b with mismatching assoc# 0x3 vs 0x2 [ 2.339364] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 2.339366] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 2.339367] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.339368] sound hdaudioC1D0: mono: mono_out=0x0 [ 2.339369] sound hdaudioC1D0: dig-out=0x1e/0x0 [ 2.339370] sound hdaudioC1D0: inputs: [ 2.339371] sound hdaudioC1D0: Mic=0x18 [ 2.339372] sound hdaudioC1D0: Internal Mic=0x12 [ 2.340164] usb 3-10: new high-speed USB device number 5 using xhci_hcd [ 2.347437] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 2.347682] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 2.349884] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2.517021] usb 3-10: New USB device found, idVendor=5986, idProduct=066d [ 2.517024] usb 3-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.517025] usb 3-10: Product: BisonCam, NB Pro [ 2.517027] usb 3-10: Manufacturer: Generic [ 2.517028] usb 3-10: SerialNumber: 200901010001 [ 2.528338] Switched to clocksource tsc [ 2.532193] usbcore: registered new interface driver btusb [ 2.535205] media: Linux media interface: v0.10 [ 2.538223] Linux video capture interface: v2.00 [ 2.538851] usbcore: registered new interface driver usbhid [ 2.538852] usbhid: USB HID core driver [ 2.541303] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [ 2.544660] Bluetooth: hci0: read Intel version: 3707100100012d0d00 [ 2.544972] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq [ 2.545520] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:066d) [ 2.547954] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input20 [ 2.548012] usbcore: registered new interface driver uvcvideo [ 2.548013] USB Video Class driver (1.1.1) [ 2.598839] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input21 [ 2.598947] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-6:1 [ 2.630734] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 3.738629] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 3.741220] vboxdrv: Found 8 processor cores. [ 3.741373] vboxdrv: fAsync=0 offMin=0x191 offMax=0x10e3 [ 3.741433] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 3.741434] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 3.755024] vboxpci: IOMMU not found (not registered) [ 3.801158] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.068626] init: plymouth-upstart-bridge main process ended, respawning [ 4.071379] init: plymouth-upstart-bridge main process (1313) terminated with status 1 [ 4.071385] init: plymouth-upstart-bridge main process ended, respawning [ 5.822274] wlan0: authenticate with 84:9c:a6:5d:2d:0e [ 5.825769] wlan0: send auth to 84:9c:a6:5d:2d:0e (try 1/3) [ 5.833699] wlan0: authenticated [ 5.834306] wlan0: associate with 84:9c:a6:5d:2d:0e (try 1/3) [ 5.841456] wlan0: RX AssocResp from 84:9c:a6:5d:2d:0e (capab=0x431 status=0 aid=2) [ 5.842023] wlan0: associated [ 5.842043] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5.842095] cfg80211: Calling CRDA for country: DE [ 5.843838] cfg80211: Regulatory domain changed to country: DE [ 5.843840] cfg80211: DFS Master region: unset [ 5.843841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 5.843843] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.843845] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.843846] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 5.843847] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s) [ 5.843848] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 32.330088] audit_printk_skb: 147 callbacks suppressed [ 32.330091] audit: type=1400 audit(1431802142.674:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2574 comm="apparmor_parser" [ 32.330097] audit: type=1400 audit(1431802142.674:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2574 comm="apparmor_parser" [ 32.330366] audit: type=1400 audit(1431802142.674:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2574 comm="apparmor_parser" |
Kann es bei mir daran liegen, dass ich zwei Audiokarten habe?
Ich bedanke mich vorab für eure Hilfe.
Gruß Alex
Nachtrag:
Nach Herstellerangaben sind in dem Rechner folgende Komponenten verbaut:
Sount: HD Audio, Sound Blaster® X-FI® MB3, ONKYO 2.0 Speaker-System
Chipsatz: Mobile Intel HM87 Express
1 2 3 4 5 6 7 8 | $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7a14000 irq 50 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7a10000 irq 51 $ cat /proc/asound/modules 0 snd_hda_intel 1 snd_hda_intel |
Würde es was bringen, wenn die Priorität der beiden Karten geändert werden würde? Wie könnte man das in diesem Fall realisieren, wenn beide Module gleich benannt sind?