Ja danke für den LINK.
hilft mir leider nicht so recht weiter, weil ich keinen Vergleich habe, wie es richtig sein sollte.
Denoch hier der System auswurf:
[ 1.305935] Key type big_key registered
[ 1.306511] Key type asymmetric registered
[ 1.306513] Asymmetric key parser 'x509' registered
[ 1.306541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.306586] io scheduler noop registered
[ 1.306587] io scheduler deadline registered (default)
[ 1.306610] io scheduler cfq registered
[ 1.307142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.307154] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.307189] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 1.307191] vesafb: scrolling: redraw
[ 1.307192] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.307717] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 4032k, total 4032k
[ 1.451083] Console: switching to colour frame buffer device 160x50
[ 1.594415] fb0: VESA VGA frame buffer device
[ 1.594430] intel_idle: MWAIT substates: 0x1120
[ 1.594432] intel_idle: v0.4 model 0x25
[ 1.594433] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.594536] ipmi message handler version 39.2
[ 1.595118] ACPI: AC Adapter [AC] (on-line)
[ 1.595197] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.595404] ACPI: Lid Switch [LID]
[ 1.595496] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.595503] ACPI: Sleep Button [SLPB]
[ 1.595643] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.595648] ACPI: Power Button [PWRF]
[ 1.601644] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.601650] ACPI: Thermal Zone [THM0] (50 C)
[ 1.601702] GHES: HEST is not enabled!
[ 1.601981] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.625362] 0000:00:16.3: ttyS4 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 1.626090] Linux agpgart interface v0.103
[ 1.626241] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.626414] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.627747] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.628040] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.631785] brd: module loaded
[ 1.633409] loop: module loaded
[ 1.634269] libphy: Fixed MDIO Bus: probed
[ 1.634429] tun: Universal TUN/TAP device driver, 1.6
[ 1.634432] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.634588] PPP generic driver version 2.4.2
[ 1.634743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.634750] ehci-pci: EHCI PCI platform driver
[ 1.634968] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.634983] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.635039] ehci-pci 0000:00:1a.0: debug port 2
[ 1.638995] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.639044] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 1.645272] ACPI: Battery Slot [BAT0] (battery present)
[ 1.649376] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.649500] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.649504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.649508] usb usb1: Product: EHCI Host Controller
[ 1.649512] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.649515] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.649779] hub 1-0:1.0: USB hub found
[ 1.649797] hub 1-0:1.0: 3 ports detected
[ 1.650121] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.650134] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.650153] ehci-pci 0000:00:1d.0: debug port 2
[ 1.654090] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.654122] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 1.665387] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.665468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.665473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.665476] usb usb2: Product: EHCI Host Controller
[ 1.665480] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.665483] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.665741] hub 2-0:1.0: USB hub found
[ 1.665758] hub 2-0:1.0: 3 ports detected
[ 1.665940] ehci-platform: EHCI generic platform driver
[ 1.665956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.665958] ohci-pci: OHCI PCI platform driver
[ 1.665974] ohci-platform: OHCI generic platform driver
[ 1.665984] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.666079] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.669212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.669222] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.669586] mousedev: PS/2 mouse device common for all mice
[ 1.670255] rtc_cmos 00:06: RTC can wake from S4
[ 1.670514] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.670595] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.670703] device-mapper: uevent: version 1.0.3
[ 1.670870] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.670881] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.671084] TCP: cubic registered
[ 1.671242] NET: Registered protocol family 10
[ 1.671588] NET: Registered protocol family 17
[ 1.671605] Key type dns_resolver registered
[ 1.672264] Loading compiled-in X.509 certificates
[ 1.674339] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 1.674360] registered taskstats version 1
[ 1.675291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.678876] Key type trusted registered
[ 1.682685] Key type encrypted registered
[ 1.686584] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.686592] IMA: No TPM chip found, activating TPM-bypass!
[ 1.687274] regulator-dummy: disabling
[ 1.687419] Magic number: 6:315:734
[ 1.687602] rtc_cmos 00:06: setting system clock to 2014-07-18 12:42:53 UTC (1405687373)
[ 1.693024] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.693026] EDD information not available.
[ 1.693085] PM: Hibernation image not present or could not be loaded.
[ 1.694348] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 1.694351] Write protecting the kernel read-only data: 12288k
[ 1.696351] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[ 1.697979] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[ 1.714234] systemd-udevd[115]: starting version 204
[ 1.727118] wmi: Mapper loaded
[ 1.738494] pps_core: LinuxPPS API ver. 1 registered
[ 1.738498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.740346] PTP clock support registered
[ 1.740766] sdhci: Secure Digital Host Controller Interface driver
[ 1.740768] sdhci: Copyright(c) Pierre Ossman
[ 1.742915] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.743177] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.743185] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[ 1.743186] mmc0: no vqmmc regulator found
[ 1.743189] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[ 1.743190] mmc0: no vmmc regulator found
[ 1.743319] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 1.745781] [drm] Initialized drm 1.1.0 20060810
[ 1.747573] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.747576] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.747822] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.747855] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 1.841527] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.961733] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.996009] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6a:b9:bc
[ 1.996011] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.996089] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.996188] ahci 0000:00:1f.2: version 3.0
[ 1.996378] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.996424] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.996472] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.996475] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.018196] scsi0 : ahci
[ 2.018371] scsi1 : ahci
[ 2.018527] scsi2 : ahci
[ 2.018670] scsi3 : ahci
[ 2.018758] scsi4 : ahci
[ 2.018849] scsi5 : ahci
[ 2.018893] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 41
[ 2.018896] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 41
[ 2.018897] ata3: DUMMY
[ 2.018898] ata4: DUMMY
[ 2.018901] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 41
[ 2.018904] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 41
[ 2.019597] [drm] Memory usable by graphics device = 2048M
[ 2.019601] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[ 2.019602] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.019618] Console: switching to colour dummy device 80x25
[ 2.077744] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 2.077760] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.077763] [drm] Driver supports precise vblank timestamp query.
[ 2.078152] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.098057] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.098060] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.098285] hub 1-1:1.0: USB hub found
[ 2.098386] hub 1-1:1.0: 6 ports detected
[ 2.197671] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.209704] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.215984] fbcon: inteldrmfb (fb0) is primary device
[ 2.277775] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[ 2.337844] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.338586] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.338589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.338592] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.338992] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000H1, CXM05H1Q, max UDMA/100
[ 2.338994] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.339631] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.339635] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.339638] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.340009] ata1.00: configured for UDMA/100
[ 2.340270] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
[ 2.340484] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.340496] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.340640] sd 0:0:0:0: [sda] Write Protect is off
[ 2.340643] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.340753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.341804] sda: sda1 sda2 < sda5 >
[ 2.341872] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ff6ab9bcff, S400
[ 2.342326] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.342328] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.342612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.342621] hub 2-1:1.0: USB hub found
[ 2.342842] hub 2-1:1.0: 8 ports detected
[ 2.413960] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.507621] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 2.507624] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.507627] usb 1-1.3: Product: Biometric Coprocessor
[ 2.507629] usb 1-1.3: Manufacturer: UPEK
[ 2.578149] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.658020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.659900] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.659904] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.660137] ata2.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.661420] ata2.00: ATA-8: HITACHI HTS723216L9SA60, FC2ZC50B, max UDMA/100
[ 2.661422] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.663162] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.663164] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.663397] ata2.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.664781] ata2.00: configured for UDMA/100
[ 2.665097] scsi 1:0:0:0: Direct-Access ATA HITACHI HTS72321 FC2Z PQ: 0 ANSI: 5
[ 2.665302] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.665319] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.665374] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.665376] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.665424] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.675293] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.675296] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.675298] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.675300] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.675302] usb 1-1.4: SerialNumber: XXX
[ 2.746268] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.750147] Console: switching to colour frame buffer device 160x50
[ 2.752444] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.752445] i915 0000:00:02.0: registered panic notifier
[ 2.760376] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.763261] acpi device:02: registered as cooling_device4
[ 2.763359] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.763485] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.840929] usb 2-1.1: New USB device found, idVendor=05dc, idProduct=a20b
[ 2.840936] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.840940] usb 2-1.1: Product: USB Flash Drive
[ 2.840944] usb 2-1.1: Manufacturer: Lexar
[ 2.840947] usb 2-1.1: SerialNumber: XXX
[ 2.844225] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 2.844331] scsi6 : usb-storage 2-1.1:1.0
[ 2.844388] usbcore: registered new interface driver usb-storage
[ 2.982246] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.994922] sdb: sdb1
[ 2.995859] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.278708] Switched to clocksource tsc
[ 3.302406] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.021832] scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 4
[ 4.022266] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.023014] sd 6:0:0:0: [sdc] 15671296 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 4.023789] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.023793] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4.024739] sd 6:0:0:0: [sdc] No Caching mode page found
[ 4.024744] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 4.030156] sd 6:0:0:0: [sdc] No Caching mode page found
[ 4.030159] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 4.031141] sdc: sdc1
[ 4.034644] sd 6:0:0:0: [sdc] No Caching mode page found
[ 4.034649] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 4.034654] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 8.746014] random: nonblocking pool is initialized
[ 15.923696] bio: create slab <bio-1> at 1
[ 16.103675] bio: create slab <bio-1> at 1
[ 16.209927] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.468736] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 16.528223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.566168] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 16.568293] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 16.589421] systemd-udevd[448]: starting version 204
[ 16.662973] lp: driver loaded but no devices found
[ 16.683605] ppdev: user-space parallel port driver
[ 16.730111] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 16.829613] cfg80211: Calling CRDA to update world regulatory domain
[ 16.869620] Bluetooth: Core ver 2.17
[ 16.869669] NET: Registered protocol family 31
[ 16.869671] Bluetooth: HCI device and connection manager initialized
[ 16.869682] Bluetooth: HCI socket layer initialized
[ 16.869685] Bluetooth: L2CAP socket layer initialized
[ 16.869691] Bluetooth: SCO socket layer initialized
[ 16.871484] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 16.871487] Copyright(c) 2003-2013 Intel Corporation
[ 16.871705] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.871943] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
[ 16.874329] Non-volatile memory driver v1.3
[ 16.878734] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
[ 16.878739] iwlwifi 0000:03:00.0: Falling back to user helper
[ 16.890975] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 16.890979] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 16.890981] thinkpad_acpi: ThinkPad BIOS 6IET78WW (1.38 ), EC 8THT39WW-1.14
[ 16.890983] thinkpad_acpi: Lenovo ThinkPad T410, model 25374A5
[ 16.896514] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 16.902744] thinkpad_acpi: radio switch found; radios are enabled
[ 16.902769] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 16.902770] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 16.912988] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[ 16.912998] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.913003] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 16.913007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.913008] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 16.913012] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.913013] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 16.913017] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.913018] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.913500] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 16.916422] usbcore: registered new interface driver btusb
[ 16.930864] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 16.931848] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 16.932109] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 16.943189] Bluetooth: RFCOMM TTY layer initialized
[ 16.943208] Bluetooth: RFCOMM socket layer initialized
[ 16.943214] Bluetooth: RFCOMM ver 1.11
[ 16.943885] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.943890] Bluetooth: BNEP filters: protocol multicast
[ 16.943898] Bluetooth: BNEP socket layer initialized
[ 16.944734] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 16.966036] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 17.023115] type=1400 audit(1405687388.823:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=606 comm="apparmor_parser"
[ 17.023125] type=1400 audit(1405687388.823:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=606 comm="apparmor_parser"
[ 17.023730] type=1400 audit(1405687388.823:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=606 comm="apparmor_parser"
[ 17.038461] hda_codec: CX20585: BIOS auto-probing.
[ 17.038997] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 17.039000] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.039002] hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 17.039004] mono: mono_out=0x0
[ 17.039005] inputs:
[ 17.039008] Mic=0x1b
[ 17.039010] Internal Mic=0x23
[ 17.039011] Dock Mic=0x1a
[ 17.040110] hda_codec: Enable sync_write for stable communication
[ 17.040503] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 17.088516] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.088766] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.089875] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.090020] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.090153] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.090245] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.090401] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.108467] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 17.131152] type=1400 audit(1405687388.931:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=636 comm="apparmor_parser"
[ 17.131163] type=1400 audit(1405687388.931:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
[ 17.131168] type=1400 audit(1405687388.931:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
[ 17.131731] type=1400 audit(1405687388.931:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
[ 17.131740] type=1400 audit(1405687388.931:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
[ 17.132033] type=1400 audit(1405687388.931:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
[ 17.140570] init: cups main process (622) killed by HUP signal
[ 17.140589] init: cups main process ended, respawning
[ 17.254660] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
[ 17.254666] iwlwifi 0000:03:00.0: Falling back to user helper
[ 17.265022] cfg80211: World regulatory domain updated:
[ 17.265028] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.265030] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.265032] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.265034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.265036] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.265038] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.306551] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 17.349060] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 17.349064] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 17.349066] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 17.349068] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 17.349169] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 17.383162] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 17.545735] init: failsafe main process (710) killed by TERM signal
[ 17.817478] type=1400 audit(1405687389.615:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=980 comm="apparmor_parser"
[ 17.912381] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 17.952655] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 17.952663] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 18.001949] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 18.015937] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 18.016066] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.016484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.018749] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 18.025732] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 18.145953] init: alsa-restore main process (1086) terminated with status 99
[ 18.237321] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 18.244380] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 18.346194] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.346643] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.836318] init: plymouth-upstart-bridge main process ended, respawning
[ 18.846440] init: plymouth-upstart-bridge main process (1335) terminated with status 1
[ 18.846462] init: plymouth-upstart-bridge main process ended, respawning
[ 21.624845] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 23.212051] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 23.464285] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
[ 24.722787] wlan0: authenticate with 00:24:01:32:aa:f1
[ 24.763879] wlan0: send auth to 00:24:01:32:aa:f1 (try 1/3)
[ 24.767326] wlan0: authenticated
[ 24.767579] wlan0: associate with 00:24:01:32:aa:f1 (try 1/3)
[ 24.771003] wlan0: RX AssocResp from 00:24:01:32:aa:f1 (capab=0x431 status=0 aid=2)
[ 24.773585] wlan0: associated
[ 24.773620] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.933032] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 47.181171] audit_printk_skb: 150 callbacks suppressed
[ 47.181176] type=1400 audit(1405687418.969:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3043 comm="apparmor_parser"
[ 47.181182] type=1400 audit(1405687418.969:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3043 comm="apparmor_parser"
[ 47.181577] type=1400 audit(1405687418.969:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3043 comm="apparmor_parser"
[ 703.694268] perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Besonders interessant:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
oder?
[ 17.038461] hda_codec: CX20585: BIOS auto-probing.
[ 17.038997] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 17.039000] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.039002] hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 17.039004] mono: mono_out=0x0
[ 17.039005] inputs:
[ 17.039008] Mic=0x1b
[ 17.039010] Internal Mic=0x23
[ 17.039011] Dock Mic=0x1a
[ 17.040110] hda_codec: Enable sync_write for stable communication
[ 17.040503] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/
Na ja vielleicht hift der Ausdruck ja.