Guten Abend, ich habe jetzt schon seid einiger Zeit ein Problem mit meinem Monitor unter Ubuntu. Und zwar wird die Auflösung und das Seitenverhältniss meines Monitors nicht richtig erkannt. Der Monitor ist ein Acer X223W. Die Grafikkarte eine nVidia gt9500. Die native Auflösung für den Monitor wäre 1680x1050. Zur Auswahl habe ich aber nur 800x600, 1024x768, 1152x864 und 1360x168. Zur Zeit nutze ich 1360x768. Dabei habe ich aber das Problem, dass ich ca die rechten 6-7cm des Monitors nicht mit der Maus erreichen kann. Ich bin mir sicher, dass sowohl der Monitor als auch dir Grafikkarte in der Lage sind 1680x1050 darzustellen. Ich habe den Rechner Jahre lang mit diesem Monitor in dieser Auflösung mit Wondows Vista/7 betrieben.
Ich habe als mal etwas gegoogelt und bin hierauf gestoßen: http://askubuntu.com/questions/19954/how-to-set-the-monitor-to-its-native-resolution-which-is-not-listed-in-the-resol
Dem bin ich gefolgt:
cvt 1680 1050 60 # 1680x1050 59.95 Hz (CVT 1.76MA) hsync: 65.29 kHz; pclk: 146.25 MHz Modeline "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
xrandr Screen 0: minimum 8 x 8, current 1360 x 768, maximum 8192 x 8192 DVI-I-0 connected primary 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0* 59.8 1152x864 60.0 800x600 72.2 60.3 56.2 680x384 60.0 59.8 640x480 59.9 512x384 60.0 400x300 72.2 320x240 60.1 TV-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) 1680x1050_60.00 (0x27b) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
aber
xrandr --addmode DVI-I-0 1680x1050_60.00
gibt
X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30
aus. Ab hier weiß ich nicht mehr weiter. Kennt sich jemand mit der Thema aus und kann mir weiter helfen?
Gruß, Gnoccy