Hi,
ich fahre meinen Laptop fast nie runter und nutze eigentlich nur den Standby Modus (also Deckel zu). Neulich ist er mittendrin ausgegangen, weil der Akku leer war. Beim Hochfahren funktioniert alles normal bis eigentlich der Loginscreen kommen sollte. Ich sehe also die Ubuntu Schrift und die Punkte und dann passiert nichts. Ich bin der Meinung, dass ich im BIOS discrete graphics eingestellt hatte, damit ich einen externen Monitor nutzen kann, jetzt ist die Einstellung aber auf NVIDIA Optimus. dmesg habe ich mal angehängt. Was aber funktioniert ist die normale Konsole und da läuft auch lightdm als Prozess. Nur angezeigt wird nichts.
Auch der failsafe mode funktioniert nicht. Ich bekomme zwar ein login screen, nach dem Login bleibt er aber hängen.
Ich weiß nicht so richtig, in welche Richtung ich hier den Fehler suchen soll. Ist das eher ein Treiber Problem oder kann es sein, dass die Grafikkarte kaputt ist? Kann es sein, dass das ein Update war, das erst nach einem Neustart zum tragen kam? Jetzt weiß ich natürlich nicht welches.
- Lenovo Thinkpad T420, 3.13.0-24
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6f7537d5-cacb-4c2f-9af1-eaf5572cddc4 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000b3d99fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b3d9a000-0x00000000bae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 4180PH3/4180PH3, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23F000000 mask FFF000000 uncachable [ 0.000000] 8 base 23E800000 mask FFF800000 uncachable [ 0.000000] 9 base 23E600000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xb3d9a max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23e400000-0x23e5fffff] [ 0.000000] [mem 0x23e400000-0x23e5fffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23e3fffff] [ 0.000000] [mem 0x23c000000-0x23e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xb3d99fff] [ 0.000000] [mem 0x40200000-0xb3bfffff] page 2M [ 0.000000] [mem 0xb3c00000-0xb3d99fff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x35b86000-0x36dbafff] [ 0.000000] ACPI: RSDP 00000000000f00e0 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000baffe120 0000A4 (v01 LENOVO TP-83 00001330 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000bafe9000 0000F4 (v04 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000bafec000 00E3EA (v01 LENOVO TP-83 00001330 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf2d000 000040 [ 0.000000] ACPI: SSDT 00000000baffd000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baffc000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000baffb000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000bafe8000 000038 (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafe7000 000098 (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafe6000 00003C (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000bafe5000 000052 (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000bafeb000 0000A5 (v32 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000bafe4000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000bafe3000 000A27 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe2000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000bafe1000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe0000 00003E (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafdf000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafde000 000292 (v01 LENOVO TP-83 00001330 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23e5fffff] [ 0.000000] NODE_DATA [mem 0x23e5f6000-0x23e5fafff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235e00000-ffff88023dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xb3d99fff] [ 0.000000] node 0: [mem 0x100000000-0x23e5fffff] [ 0.000000] On node 0 totalpages: 2039606 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11431 pages used for memmap [ 0.000000] DMA32 zone: 731546 pages, LIFO batch:31 [ 0.000000] Normal zone: 20376 pages used for memmap [ 0.000000] Normal zone: 1304064 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb3d9a000-0xbae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023e200000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2007579 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6f7537d5-cacb-4c2f-9af1-eaf5572cddc4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7926592K/8158424K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 231832K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33030144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2491.968 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4983.93 BogoMIPS (lpj=9967872) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000026] Security Framework initialized [ 0.000042] AppArmor: AppArmor initialized [ 0.000044] Yama: becoming mindful. [ 0.000625] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002251] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002952] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002964] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003153] Initializing cgroup subsys memory [ 0.003158] Initializing cgroup subsys devices [ 0.003160] Initializing cgroup subsys freezer [ 0.003161] Initializing cgroup subsys blkio [ 0.003162] Initializing cgroup subsys perf_event [ 0.003165] Initializing cgroup subsys hugetlb [ 0.003183] Disabled fast string operations [ 0.003185] CPU: Physical Processor ID: 0 [ 0.003186] CPU: Processor Core ID: 0 [ 0.003190] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003190] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003193] mce: CPU supports 7 MCE banks [ 0.003204] CPU0: Thermal monitoring enabled (TM1) [ 0.003211] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003211] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003211] tlb_flushall_shift: 5 [ 0.003317] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000) [ 0.004342] ACPI: Core revision 20131115 [ 0.009904] ACPI: All ACPI Tables successfully acquired [ 0.010767] ftrace: allocating 28408 entries in 111 pages [ 0.023554] dmar: Host address width 36 [ 0.023557] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.023562] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.023563] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.023567] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.023568] dmar: RMRR base: 0x000000bacd5000 end: 0x000000bacebfff [ 0.023569] dmar: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.023639] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.023640] HPET id 0 under DRHD base 0xfed91000 [ 0.023641] HPET id 0 under DRHD base 0xfed91000 [ 0.023642] HPET id 0 under DRHD base 0xfed91000 [ 0.023642] HPET id 0 under DRHD base 0xfed91000 [ 0.023643] HPET id 0 under DRHD base 0xfed91000 [ 0.023644] HPET id 0 under DRHD base 0xfed91000 [ 0.023645] HPET id 0 under DRHD base 0xfed91000 [ 0.023645] HPET id 0 under DRHD base 0xfed91000 [ 0.023863] Enabled IRQ remapping in x2apic mode [ 0.023865] Enabling x2apic [ 0.023866] Enabled x2apic [ 0.023872] Switched APIC routing to cluster x2apic. [ 0.024318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064010] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07) [ 0.064018] TSC deadline timer enabled [ 0.066125] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.066131] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.066133] ... version: 3 [ 0.066134] ... bit width: 48 [ 0.066135] ... generic registers: 4 [ 0.066136] ... value mask: 0000ffffffffffff [ 0.066137] ... max period: 0000ffffffffffff [ 0.066138] ... fixed-purpose events: 3 [ 0.066138] ... event mask: 000000070000000f [ 0.067716] x86: Booting SMP configuration: [ 0.078661] Disabled fast string operations [ 0.080868] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.091896] Disabled fast string operations [ 0.105035] Disabled fast string operations [ 0.067718] .... node #0, CPUs: #1 #2 #3 [ 0.107160] x86: Booted up 1 node, 4 CPUs [ 0.107163] smpboot: Total of 4 processors activated (19935.74 BogoMIPS) [ 0.110305] devtmpfs: initialized [ 0.112754] EVM: security.selinux [ 0.112756] EVM: security.SMACK64 [ 0.112756] EVM: security.ima [ 0.112757] EVM: security.capability [ 0.112799] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes) [ 0.113478] pinctrl core: initialized pinctrl subsystem [ 0.113529] regulator-dummy: no parameters [ 0.113560] RTC time: 9:59:41, date: 09/15/14 [ 0.113590] NET: Registered protocol family 16 [ 0.113673] cpuidle: using governor ladder [ 0.113674] cpuidle: using governor menu [ 0.113704] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.113706] ACPI: bus type PCI registered [ 0.113707] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.113939] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.113942] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.118875] PCI: Using configuration type 1 for base access [ 0.119677] bio: create slab <bio-0> at 0 [ 0.119816] ACPI: Added _OSI(Module Device) [ 0.119818] ACPI: Added _OSI(Processor Device) [ 0.119820] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.119821] ACPI: Added _OSI(Processor Aggregator Device) [ 0.121434] ACPI : EC: EC description table is found, configuring boot EC [ 0.125454] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.135920] ACPI: SSDT 00000000bae8c018 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.136328] ACPI: Dynamic OEM Table Load: [ 0.136330] ACPI: SSDT (null) 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.139453] ACPI: SSDT 00000000bae8da98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.139885] ACPI: Dynamic OEM Table Load: [ 0.139887] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.143350] ACPI: SSDT 00000000bae8bd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.143755] ACPI: Dynamic OEM Table Load: [ 0.143756] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.147766] ACPI: Interpreter enabled [ 0.147771] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.147775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.147787] ACPI: (supports S0 S3 S4 S5) [ 0.147788] ACPI: Using IOAPIC for interrupt routing [ 0.147810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.148518] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.151738] ACPI: Power Resource [PUBS] (on) [ 0.155628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.155699] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.155770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.155838] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.155907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.155963] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.156033] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) [ 0.156101] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.156147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.156152] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.156290] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.156355] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.156357] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.156359] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.156360] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.156386] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.156508] PCI host bridge to bus 0000:00 [ 0.156510] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.156512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.156513] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.156515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.156517] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff] [ 0.156518] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.156526] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.156596] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.156628] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.156681] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.156692] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.156698] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.156702] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f] [ 0.156787] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.156811] pci 0000:00:16.0: reg 0x10: [mem 0xf3a25000-0xf3a2500f 64bit] [ 0.156889] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.156948] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002 [ 0.156967] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7] [ 0.156977] pci 0000:00:16.3: reg 0x14: [mem 0xf3a2c000-0xf3a2cfff] [ 0.157107] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.157125] pci 0000:00:19.0: reg 0x10: [mem 0xf3a00000-0xf3a1ffff] [ 0.157134] pci 0000:00:19.0: reg 0x14: [mem 0xf3a2b000-0xf3a2bfff] [ 0.157143] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f] [ 0.157208] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.157242] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.157273] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.157294] pci 0000:00:1a.0: reg 0x10: [mem 0xf3a2a000-0xf3a2a3ff] [ 0.157386] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.157419] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.157451] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.157467] pci 0000:00:1b.0: reg 0x10: [mem 0xf3a20000-0xf3a23fff 64bit] [ 0.157537] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.157574] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.157604] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.157723] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.157797] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.157925] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.157999] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.158127] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.158172] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.158203] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.158333] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.158411] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.158433] pci 0000:00:1d.0: reg 0x10: [mem 0xf3a29000-0xf3a293ff] [ 0.158524] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.158557] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.158588] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.158747] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.158767] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af] [ 0.158775] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf] [ 0.158783] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7] [ 0.158792] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb] [ 0.158800] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f] [ 0.158808] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a28000-0xf3a287ff] [ 0.158854] pci 0000:00:1f.2: PME# supported from D3hot [ 0.158906] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.158922] pci 0000:00:1f.3: reg 0x10: [mem 0xf3a24000-0xf3a240ff 64bit] [ 0.158944] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.159057] pci 0000:01:00.0: [10de:1057] type 00 class 0x030000 [ 0.159069] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff] [ 0.159081] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.159093] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.159101] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] [ 0.159109] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.167241] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.167249] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.167256] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.167266] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.167379] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.167628] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.167791] pci 0000:03:00.0: reg 0x10: [mem 0xf3900000-0xf3901fff 64bit] [ 0.168505] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.175374] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.175383] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff] [ 0.175488] acpiphp: Slot [1] registered [ 0.175495] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.175501] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.175506] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff] [ 0.175514] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.175669] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001 [ 0.175688] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.175715] pci 0000:0d:00.0: reg 0x10: [mem 0xf2801000-0xf28010ff] [ 0.175912] pci 0000:0d:00.0: supports D1 D2 [ 0.175913] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176042] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.176068] pci 0000:0d:00.3: reg 0x10: [mem 0xf2800000-0xf28007ff] [ 0.176265] pci 0000:0d:00.3: supports D1 D2 [ 0.176266] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.183319] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.183330] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.183339] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf30fffff] [ 0.183354] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.184456] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.184468] ACPI: \_SB_.PCI0: notify handler is installed [ 0.184510] Found 1 acpi root devices [ 0.184570] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.184651] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.184656] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.184658] vgaarb: loaded [ 0.184659] vgaarb: bridge control possible 0000:01:00.0 [ 0.184659] vgaarb: no bridge control possible 0000:00:02.0 [ 0.184791] SCSI subsystem initialized [ 0.184841] libata version 3.00 loaded. [ 0.184858] ACPI: bus type USB registered [ 0.184871] usbcore: registered new interface driver usbfs [ 0.184877] usbcore: registered new interface driver hub [ 0.184899] usbcore: registered new device driver usb [ 0.184992] PCI: Using ACPI for IRQ routing [ 0.186718] PCI: pci_cache_line_size set to 64 bytes [ 0.186912] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.186913] e820: reserve RAM buffer [mem 0xb3d9a000-0xb3ffffff] [ 0.186915] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff] [ 0.186982] NetLabel: Initializing [ 0.186983] NetLabel: domain hash size = 128 [ 0.186984] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.186993] NetLabel: unlabeled traffic allowed by default [ 0.187041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.187046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.189086] Switched to clocksource hpet [ 0.193373] AppArmor: AppArmor Filesystem Enabled [ 0.193396] pnp: PnP ACPI init [ 0.193407] ACPI: bus type PNP registered [ 0.193759] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.193761] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.193763] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.193765] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.193766] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.193768] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.193769] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.193771] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.193772] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.193774] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.193776] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.193777] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.193779] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.193780] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.193782] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved [ 0.193784] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.193786] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.193789] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.193879] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.193881] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.193883] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.193885] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.193886] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.193888] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.193890] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.193891] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.193893] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.193895] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.193896] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.193898] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.193900] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193948] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.193958] pnp 00:03: [dma 4] [ 0.193970] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.193987] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.194015] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.194039] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.194061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.194082] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.194121] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.194502] pnp: PnP ACPI: found 10 devices [ 0.194504] ACPI: bus type PNP unregistered [ 0.200595] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.200652] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.200654] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.200656] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.200659] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.200662] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.200665] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.200682] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.200689] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff] [ 0.200701] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.200705] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.200711] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff] [ 0.200716] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.200725] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.200728] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.200735] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf30fffff] [ 0.200740] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.200749] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.200751] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.200752] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.200754] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff] [ 0.200755] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.200757] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.200758] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.200760] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.200762] pci_bus 0000:03: resource 1 [mem 0xf3900000-0xf39fffff] [ 0.200763] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.200765] pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf38fffff] [ 0.200766] pci_bus 0000:05: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref] [ 0.200768] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.200769] pci_bus 0000:0d: resource 1 [mem 0xf2800000-0xf30fffff] [ 0.200771] pci_bus 0000:0d: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref] [ 0.200796] NET: Registered protocol family 2 [ 0.200963] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.201132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.201257] TCP: Hash tables configured (established 65536 bind 65536) [ 0.201281] TCP: reno registered [ 0.201292] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.201324] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.201396] NET: Registered protocol family 1 [ 0.201408] pci 0000:00:02.0: Boot video device [ 0.201765] PCI: CLS 64 bytes, default 64 [ 0.201824] Trying to unpack rootfs image as initramfs... [ 0.488025] Freeing initrd memory: 18644K (ffff880035b86000 - ffff880036dbb000) [ 0.488070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.488072] software IO TLB [mem 0xafd9a000-0xb3d9a000] (64MB) mapped at [ffff8800afd9a000-ffff8800b3d99fff] [ 0.488253] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a [ 0.488260] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a [ 0.488266] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a [ 0.488274] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a [ 0.488320] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.488322] Scanning for low memory corruption every 60 seconds [ 0.488565] Initialise system trusted keyring [ 0.488600] audit: initializing netlink socket (disabled) [ 0.488609] type=2000 audit(1410775181.484:1): initialized [ 0.513572] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.514695] VFS: Disk quotas dquot_6.5.2 [ 0.514730] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.515073] fuse init (API version 7.22) [ 0.515134] msgmni has been set to 15518 [ 0.515177] Key type big_key registered [ 0.515590] Key type asymmetric registered [ 0.515592] Asymmetric key parser 'x509' registered [ 0.515617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.515653] io scheduler noop registered [ 0.515655] io scheduler deadline registered (default) [ 0.515678] io scheduler cfq registered [ 0.515828] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.516305] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.516317] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.516351] intel_idle: MWAIT substates: 0x21120 [ 0.516352] intel_idle: v0.4 model 0x2A [ 0.516353] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.516435] ipmi message handler version 39.2 [ 0.516895] ACPI: AC Adapter [AC] (on-line) [ 0.517005] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.517174] ACPI: Lid Switch [LID] [ 0.517206] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.517212] ACPI: Sleep Button [SLPB] [ 0.517245] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.517247] ACPI: Power Button [PWRF] [ 0.518408] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.518411] ACPI: Thermal Zone [THM0] (58 C) [ 0.518429] GHES: HEST is not enabled! [ 0.518513] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.540526] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A [ 0.540748] Linux agpgart interface v0.103 [ 0.540875] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78) [ 0.550313] ACPI: Battery Slot [BAT0] (battery present) [ 0.597200] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [ 0.598485] brd: module loaded [ 0.599030] loop: module loaded [ 0.599298] libphy: Fixed MDIO Bus: probed [ 0.599361] tun: Universal TUN/TAP device driver, 1.6 [ 0.599362] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.599403] PPP generic driver version 2.4.2 [ 0.599443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.599452] ehci-pci: EHCI PCI platform driver [ 0.599538] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.599545] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.599558] ehci-pci 0000:00:1a.0: debug port 2 [ 0.603452] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.603472] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a2a000 [ 0.613220] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.613328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.613330] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.613332] usb usb1: Product: EHCI Host Controller [ 0.613333] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 0.613335] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.613443] hub 1-0:1.0: USB hub found [ 0.613451] hub 1-0:1.0: 3 ports detected [ 0.613613] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.613618] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.613630] ehci-pci 0000:00:1d.0: debug port 2 [ 0.617521] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.617538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a29000 [ 0.629269] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.629380] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.629383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.629385] usb usb2: Product: EHCI Host Controller [ 0.629386] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 0.629388] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.629595] hub 2-0:1.0: USB hub found [ 0.629603] hub 2-0:1.0: 3 ports detected [ 0.629711] ehci-platform: EHCI generic platform driver [ 0.629721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.629722] ohci-pci: OHCI PCI platform driver [ 0.629734] ohci-platform: OHCI generic platform driver [ 0.629740] uhci_hcd: USB Universal Host Controller Interface driver [ 0.629787] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.635865] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.635870] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.636131] mousedev: PS/2 mouse device common for all mice [ 0.636629] rtc_cmos 00:06: RTC can wake from S4 [ 0.636752] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.636787] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.636841] device-mapper: uevent: version 1.0.3 [ 0.636887] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.636894] ledtrig-cpu: registered to indicate activity on CPUs [ 0.636979] TCP: cubic registered [ 0.637049] NET: Registered protocol family 10 [ 0.637211] NET: Registered protocol family 17 [ 0.637219] Key type dns_resolver registered [ 0.637479] Loading compiled-in X.509 certificates [ 0.638373] Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' [ 0.638384] registered taskstats version 1 [ 0.640809] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.640940] Key type trusted registered [ 0.642998] Key type encrypted registered [ 0.644880] AppArmor: AppArmor sha1 policy hashing enabled [ 0.653215] tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value [ 0.653216] IMA: No TPM chip found, activating TPM-bypass! [ 0.653672] regulator-dummy: disabling [ 0.653784] Magic number: 14:540:980 [ 0.653891] rtc_cmos 00:06: setting system clock to 2014-09-15 09:59:42 UTC (1410775182) [ 0.658320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.658323] EDD information not available. [ 0.658363] PM: Hibernation image not present or could not be loaded. [ 0.659758] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 0.659760] Write protecting the kernel read-only data: 12288k [ 0.661888] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000) [ 0.663582] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 0.674665] systemd-udevd[121]: starting version 204 [ 0.696001] pps_core: LinuxPPS API ver. 1 registered [ 0.696005] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.697829] PTP clock support registered [ 0.697842] sdhci: Secure Digital Host Controller Interface driver [ 0.697843] sdhci: Copyright(c) Pierre Ossman [ 0.699642] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8) [ 0.699855] sdhci-pci 0000:0d:00.0: dummy supplies not allowed [ 0.699856] mmc0: no vqmmc regulator found [ 0.699858] sdhci-pci 0000:0d:00.0: dummy supplies not allowed [ 0.699860] mmc0: no vmmc regulator found [ 0.699922] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 0.704416] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.704419] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.704590] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.704615] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 0.769248] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 0.905130] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.905133] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:6c:6f:69 [ 0.905135] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.905169] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 0.905193] ahci 0000:00:1f.2: version 3.0 [ 0.905333] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.905367] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.921361] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.921375] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.925375] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.945841] scsi0 : ahci [ 0.945937] scsi1 : ahci [ 0.946016] scsi2 : ahci [ 0.946141] scsi3 : ahci [ 0.946225] scsi4 : ahci [ 0.946321] scsi5 : ahci [ 0.946352] ata1: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28100 irq 44 [ 0.946354] ata2: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28180 irq 44 [ 0.946355] ata3: DUMMY [ 0.946358] ata4: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28280 irq 44 [ 0.946359] ata5: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28300 irq 44 [ 0.946360] ata6: DUMMY [ 1.057663] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.057666] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.057944] hub 1-1:1.0: USB hub found [ 1.058132] hub 1-1:1.0: 6 ports detected [ 1.169435] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.265400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.265945] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.265956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.265962] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.266531] ata1.00: ATA-9: SanDisk SDSSDP128G, 3.1.0, max UDMA/133 [ 1.266540] ata1.00: 246162672 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.267755] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.267766] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.267772] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.268101] ata1.00: configured for UDMA/133 [ 1.268322] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP12 3.1. PQ: 0 ANSI: 5 [ 1.268523] sd 0:0:0:0: [sda] 246162672 512-byte logical blocks: (126 GB/117 GiB) [ 1.268532] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.268577] sd 0:0:0:0: [sda] Write Protect is off [ 1.268580] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.268601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.269458] sda: sda1 [ 1.269471] firewire_core 0000:0d:00.3: created device fw0: GUID 0021cc200900f26c, S400 [ 1.269658] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.309716] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.309720] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.309971] hub 2-1:1.0: USB hub found [ 1.310205] hub 2-1:1.0: 8 ports detected [ 1.381644] usb 1-1.3: new full-speed USB device number 3 using ehci-pci [ 1.475145] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 1.475156] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.475161] usb 1-1.3: Product: Biometric Coprocessor [ 1.475166] usb 1-1.3: Manufacturer: UPEK [ 1.485358] tsc: Refined TSC clocksource calibration: 2491.906 MHz [ 1.545672] usb 1-1.4: new full-speed USB device number 4 using ehci-pci [ 1.585430] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.587601] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.587612] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.587618] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.589264] ata2.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100 [ 1.589274] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.591860] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.591872] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.591878] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.593494] ata2.00: configured for UDMA/100 [ 1.593760] scsi 1:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 [ 1.593889] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.593915] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.593931] sd 1:0:0:0: [sdb] Write Protect is off [ 1.593933] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.593952] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.639283] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 1.639907] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.642614] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f [ 1.642622] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.642628] usb 1-1.4: Product: Broadcom Bluetooth Device [ 1.642632] usb 1-1.4: Manufacturer: Broadcom Corp [ 1.642636] usb 1-1.4: SerialNumber: 402CF46B9B1B [ 1.647983] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367 [ 1.648001] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.699937] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.713526] usb 1-1.6: new high-speed USB device number 5 using ehci-pci [ 1.812608] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221 [ 1.812612] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.812614] usb 1-1.6: Product: Integrated Camera [ 1.812615] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 1.885686] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 1.913498] ata4: SATA link down (SStatus 0 SControl 300) [ 1.979824] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.979834] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.979840] usb 2-1.2: Product: USB2.0 Hub [ 1.980302] hub 2-1.2:1.0: USB hub found [ 1.980674] hub 2-1.2:1.0: 2 ports detected [ 2.053586] usb 2-1.5: new full-speed USB device number 4 using ehci-pci [ 2.152190] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003 [ 2.152201] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.152207] usb 2-1.5: Product: Integrated Smart Card Reader [ 2.152212] usb 2-1.5: Manufacturer: Lenovo [ 2.233556] ata5: SATA link down (SStatus 0 SControl 300) [ 2.485841] Switched to clocksource tsc [ 2.834582] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.110589] random: init urandom read with 118 bits of entropy available [ 3.268815] random: nonblocking pool is initialized [ 3.399730] Adding 975868k swap on /dev/sdb5. Priority:-1 extents:1 across:975868k FS [ 3.452615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.536999] systemd-udevd[310]: starting version 204 [ 3.600090] lp: driver loaded but no devices found [ 3.606643] ppdev: user-space parallel port driver [ 3.702186] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.947124] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [ 3.970965] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251) [ 3.970973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.970977] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 3.970981] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.970982] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 3.970985] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.970987] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 3.970989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.970991] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.971484] [drm] Initialized drm 1.1.0 20060810 [ 3.986768] Non-volatile memory driver v1.3 [ 3.990396] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 3.990400] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 3.990401] thinkpad_acpi: ThinkPad BIOS 83ET63WW (1.33 ), EC unknown [ 3.990403] thinkpad_acpi: Lenovo ThinkPad T420, model 4180PH3 [ 3.991381] thinkpad_acpi: detected a 16-level brightness capable ThinkPad [ 3.991509] thinkpad_acpi: radio switch found; radios are enabled [ 3.991607] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 3.991610] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 3.993255] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 3.993281] [drm] Memory usable by graphics device = 2048M [ 3.995066] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 3.995585] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 4.000476] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 4.004636] wmi: Mapper loaded [ 4.036946] nvidia: module license 'NVIDIA' taints kernel. [ 4.036952] Disabling lock debugging due to kernel taint [ 4.041879] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.050204] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 4.050259] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 4.054102] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 4.054114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.054115] [drm] Driver supports precise vblank timestamp query. [ 4.084012] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 4.084016] [drm] This can cause pipe underruns and display issues. [ 4.084017] [drm] Please upgrade your BIOS to fix this. [ 4.098695] cfg80211: Calling CRDA to update world regulatory domain [ 4.101047] fbcon: inteldrmfb (fb0) is primary device [ 4.105263] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 4.105263] Copyright(c) 2003-2013 Intel Corporation [ 4.105461] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.105653] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X [ 4.107690] type=1400 audit(1410767985.951:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser" [ 4.107694] type=1400 audit(1410767985.951:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser" [ 4.107698] type=1400 audit(1410767985.951:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser" [ 4.108184] type=1400 audit(1410767985.951:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser" [ 4.108189] type=1400 audit(1410767985.951:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser" [ 4.108437] type=1400 audit(1410767985.951:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser" [ 4.132884] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2 [ 4.132885] iwlwifi 0000:03:00.0: Falling back to user helper [ 4.230621] Bluetooth: Core ver 2.17 [ 4.230639] NET: Registered protocol family 31 [ 4.230640] Bluetooth: HCI device and connection manager initialized [ 4.230647] Bluetooth: HCI socket layer initialized [ 4.230649] Bluetooth: L2CAP socket layer initialized [ 4.230652] Bluetooth: SCO socket layer initialized [ 4.244986] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.244987] Bluetooth: BNEP filters: protocol multicast [ 4.244994] Bluetooth: BNEP socket layer initialized [ 4.517317] cfg80211: World regulatory domain updated: [ 4.517318] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.517319] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.517320] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.517320] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.517320] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.517321] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.518876] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2 [ 4.518878] iwlwifi 0000:03:00.0: Falling back to user helper [ 4.576706] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm [ 4.591701] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 4.591702] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 4.591703] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 4.591704] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 4.591848] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 4.606771] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.944720] Console: switching to colour frame buffer device 200x56 [ 4.947534] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.947535] i915 0000:00:02.0: registered panic notifier [ 4.954298] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 4.956655] Bluetooth: RFCOMM TTY layer initialized [ 4.956666] Bluetooth: RFCOMM socket layer initialized [ 4.956671] Bluetooth: RFCOMM ver 1.11 [ 4.971230] acpi device:01: registered as cooling_device5 [ 4.971352] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 4.971572] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) [ 4.973636] acpi device:0b: registered as cooling_device6 [ 4.973714] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input9 [ 4.973793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.973862] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1 [ 4.973869] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014 [ 4.976074] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 4.988316] hda_codec: CX20590: BIOS auto-probing. [ 4.988740] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 4.988742] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.988743] hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 4.988744] mono: mono_out=0x0 [ 4.988745] inputs: [ 4.988746] Mic=0x1b [ 4.988747] Internal Mic=0x23 [ 4.988748] Dock Mic=0x1a [ 4.990059] hda_codec: Enable sync_write for stable communication [ 4.995991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 4.996177] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.996346] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.996515] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.000470] type=1400 audit(1410767986.843:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=661 comm="apparmor_parser" [ 5.000478] type=1400 audit(1410767986.843:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=661 comm="apparmor_parser" [ 5.000949] type=1400 audit(1410767986.843:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=661 comm="apparmor_parser" [ 5.115136] init: failsafe main process (683) killed by TERM signal [ 5.133670] init: cups main process (665) killed by HUP signal [ 5.133681] init: cups main process ended, respawning [ 5.590178] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 5.635478] Linux video capture interface: v2.00 [ 5.642583] usbcore: registered new interface driver btusb [ 5.686403] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221) [ 5.688450] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14 [ 5.688650] usbcore: registered new interface driver uvcvideo [ 5.688652] USB Video Class driver (1.1.1) [ 5.806334] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 6.318487] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 6.422357] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 6.422629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.422902] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.424618] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.424823] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 6.634063] bbswitch: version 0.7 [ 6.634071] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_ [ 6.634077] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_ [ 6.634088] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 6.634462] bbswitch: detected an Optimus _DSM function [ 6.634473] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 6.645709] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.645916] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1