ubuntuusers.de

Hey,

Irgendwie scheint Ubuntu nicht richtig den Zustand (am Netz, Akku) meines Thinkpad Edge (13", Intel SU Version) zuerkennen.

Wenn ich im Akkumodus starte, dann sind irgendwie die Einstellungen vom Netzmodus aktiv (CPU ist im Performance-Modus, beim Schließen des Deckels geht nur das Display aus anstatt in Suspend zu gehen, die Einstellungen aus dem Netzmodus halt).

Wenn ich dann das Netzkabel anschließe, ändert sich nichts am Verhalten. Ziehe ich dann jedoch den Netzstecker wieder, kann man sehen, dass mein Thinkpad im Akkumodus läuft (Bildschirm wird sofort dunkler, nach 1 min geht das Display aus, etc).

Wär cool, wenn mir jemand helfen kann ☺

Bring mal das BIOS auf den neuesten Stand. Danach gehst Du ins BIOS, aktivierst mit F9 die Default Settings, speicherst mit F10 und schaltest nach dem Verlassen des BIOS das Gerät einmal ab.

Schreib bitte auch die genaue Modellbezeichnung vom Typenschild auf der Unterseite (XXXX-YYY).

ps. benutzt Du KDE?

Hui, BIOS Update... kann ich momentan gar nicht machen (kein greifbaren USB Stick in der Nähe). Aber ich schau mal bei Lenovo auf der Webseite vorbei, obs da was neues gibt.

Typbezeichnung ist: 0196-2EG

Nein, ich benutze Gnome.

Neuste BIOS-ISO 1.20 gibt es hier. Update geht auch ohne Stick.

Installierte Version zeigst Du an mit

sudo dmidecode -s bios-version

ja, danke, das aktuelle BIOS hab ich mir schon geladen. Aber trotzdem danke für die Mühe ☺ das mit dem BIOS update ohne USB-Stick werd ich mal ausprobieren.

Edit: steht da, dass es eine minute dauern soll, allerdings läuft es schon 10 mins :-S Soll ich es abbrechen oder noch warten?

also ich kann i-wie kein BIOS Update einspielen, der sagt mir, dass es ne Minute dauert aber anscheinend passiert garnichts. Irgendwann hab ich halt ausgemacht und keine Veränderung feststellen können. Dementsprechend die Ausgabe:

sudo dmidecode -s bios-version
6YET26WW (1.11 )

Uups, das hätte auch schiefgehen können. Wie lang hast Du gewartet?

Ich würde mal den Reset auf Defaults probieren, vielleicht hast Du vorher etwas verstellt, was das Update irgendwie verhindert. Nach dem Update halt nochmal.

Ich schlage das Update deshalb vor, weil das Symptom auf einen Fehler im ACPI-BIOS hinweist, das u.a. für die Signalisierung der Stromversorgungszustands zuständig ist.

Über eine Stunde... Ich probier es grad mit der 1.19 aber die läuft auch schon wieder 15 mins... Hmm muss ich wohl doch nochmal mit USB stick probieren

Edit: Wie gesagt, passiert nichts, habs abgebrochen ohne dass Schlimmeres passiert ist.. ziemlich komisch.

Edit2: ich lese gerade den Changelog vom BIOS, ziemlich interessant scheint das hier zu sein:

 - (Fix) Fixed an issue where the computer might hang when updating the BIOS.

Auf jeden Fall wurde ohne Ende im Umfeld des Power Managements geschraubt: 😮

 - (New) Added support for battery firmware update.
 - (New) Added support for the 135W AC adapter as 65W AC adapter.
 - (Fix) Fixed an issue where the remaining battery charge might be shown as
         critical low when the computer was running with the AC adapter only
         and then the battery was attached to the computer.
 - (Fix) Fixed an issue where accidental drain of the battery might happen when
         the AC adapter was detached from the computer after shutdown.
 - (Fix) Fixed an issue that might fail to recognize Lenovo genuine batteries
         which should be recognized.
 - (Fix) Fixed an issue where the computer might resume normal operation from
         standby/sleep mode when removing and then attaching the battery in
         standby/sleep mode.
 - (Fix) Fixed an issue where the battery did not recharge when full and then
         down to 94% charge.

Von daher solltest Du wirklich schauen ob Du ein Update hinkriegst.

Hast Du schon den Reset auf Defaults probiert? Auch den Standard-Workaround aus dem ThinkPad-Forum würde ich (obwohl für einen anderen Zweck) mal probieren:

• Herunterfahren

• Netzteil ab

• Akku raus

• Einschalter > 30s gedrückt halten

• alles wieder dran und Update versuchen

Vielleicht kannst Du dir auch irgendwo einen USB-CD/DVD-Brenner leihen. Notfalls kann man auch unter Windows ein Update machen, soll aber eher riskant sein ...

EDITH meint, ein bißchen analysieren können wir trotzdem schon mal:

• Benenne die Datei /var/log/pm-powersave.log um z.B. in pm-powersave.log.01

• Starte das System neu

• Zeig

dmesg | grep -i acpi

und den Inhalt von /var/log/pm-powersave.log

die Defaults hab ich probiert gehabt, hat kein Unterschied gemacht. Auch das Workaround zeigte keine Wirkung... sehr komisch, dass kein BIOS update geht ☹ so nun hier die Ausgaben: pm-powersave.log

Running hook /etc/pm/power.d/95hdparm-apm false:
notice: /usr/lib/pm-utils/power.d/95hdparm-apm disabled by tlp.

/etc/pm/power.d/95hdparm-apm false: success.
Running hook /usr/lib/pm-utils/power.d/anacron false:
start: Job is already running: anacron

/usr/lib/pm-utils/power.d/anacron false: success.
Running hook /etc/pm/power.d/disable_wol false:
notice: /usr/lib/pm-utils/power.d/disable_wol disabled by tlp.

/etc/pm/power.d/disable_wol false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:

/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /etc/pm/power.d/intel-audio-powersave false:
notice: /usr/lib/pm-utils/power.d/intel-audio-powersave disabled by tlp.

/etc/pm/power.d/intel-audio-powersave false: success.
Running hook /etc/pm/power.d/journal-commit false:
notice: /usr/lib/pm-utils/power.d/journal-commit disabled by tlp.

/etc/pm/power.d/journal-commit false: success.
Running hook /etc/pm/power.d/laptop-mode false:
notice: /usr/lib/pm-utils/power.d/laptop-mode disabled by tlp.

/etc/pm/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:

/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.

/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /etc/pm/power.d/sata_alpm false:
notice: /usr/lib/pm-utils/power.d/sata_alpm disabled by tlp.

/etc/pm/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /etc/pm/power.d/wireless false:
notice: /usr/lib/pm-utils/power.d/wireless disabled by tlp.

/etc/pm/power.d/wireless false: success.
Running hook /etc/pm/power.d/xfs_buffer false:
notice: /usr/lib/pm-utils/power.d/xfs_buffer disabled by tlp.

/etc/pm/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/zztlp false:

/usr/lib/pm-utils/power.d/zztlp false: success.

dmesg:

[    0.000000]  BIOS-e820: 00000000b5f63000 - 00000000b5f9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b5fe1000 - 00000000b5ffd000 (ACPI data)
[    0.000000]  modified: 00000000b5f63000 - 00000000b5f9f000 (ACPI NVS)
[    0.000000]  modified: 00000000b5fe1000 - 00000000b5ffd000 (ACPI data)
[    0.000000] ACPI: RSDP 00000000000f6ee0 00024 (v04 PTLTD )
[    0.000000] ACPI: XSDT 00000000b5ff2e22 0006C (v01 LENOVO TP-6Y    00001110  LTP 00000000)
[    0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 LENOVO TP-6Y    00001110 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000b5fe6000 09D68 (v02 LENOVO TP-6Y    00001110 INTL 20050624)
[    0.000000] ACPI: FACS 00000000b5f9efc0 00040
[    0.000000] ACPI: HPET 00000000b5ffcd86 00038 (v01 LENOVO TP-6Y    00001110 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000b5ffcdbe 0003C (v01 LENOVO TP-6Y    00001110 LOHR 0000005A)
[    0.000000] ACPI: APIC 00000000b5ffcdfa 00068 (v01 LENOVO TP-6Y    00001110  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000b5ffce62 00028 (v01 LENOVO TP-6Y    00001110  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000b5ffce8a 00176 (v01 LENOVO TP-6Y    00001110  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000]   #10 [0000012000 - 0000016000]     ACPI WAKEUP
[    0.022102] ACPI: Core revision 20100428
[    0.341441] ACPI: bus type pci registered
[    0.353921] ACPI: EC: Look up EC in DSDT
[    0.362850] ACPI: BIOS _OSI(Linux) query ignored
[    0.365652] ACPI: SSDT 00000000b5f1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.366644] ACPI: Dynamic OEM Table Load:
[    0.366650] ACPI: SSDT (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.367066] ACPI: SSDT 00000000b5f19620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.368031] ACPI: Dynamic OEM Table Load:
[    0.368037] ACPI: SSDT (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.368880] ACPI: SSDT 00000000b5f1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.369897] ACPI: Dynamic OEM Table Load:
[    0.369902] ACPI: SSDT (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.370199] ACPI: SSDT 00000000b5f1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.371187] ACPI: Dynamic OEM Table Load:
[    0.371192] ACPI: SSDT (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.373135] ACPI: Interpreter enabled
[    0.373140] ACPI: (supports S0 S3 S4 S5)
[    0.373184] ACPI: Using IOAPIC for interrupt routing
[    0.375684] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.505992] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.505992] ACPI: No dock devices found.
[    0.505992] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.505992] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.531072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.531356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.531598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.531739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.531881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.532037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.561524] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.561735] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.561942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.562149] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.562366] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.562573] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.562781] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.562985] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.564168] ACPI: WMI: Mapper loaded
[    0.564172] PCI: Using ACPI for IRQ routing
[    0.594794] pnp: PnP ACPI init
[    0.594820] ACPI: bus type pnp registered
[    0.598547] pnp: PnP ACPI: found 10 devices
[    0.598552] ACPI: ACPI bus type pnp unregistered
[    0.740545] ACPI: AC Adapter [ACAD] (on-line)
[    0.741180] ACPI: Lid Switch [LID]
[    0.741251] ACPI: Power Button [PWRB]
[    0.741326] ACPI: Power Button [PWRF]
[    0.742062] ACPI: acpi_idle registered with cpuidle
[    1.760421] ACPI: Thermal Zone [TZ00] (53 C)
[    2.071173] ACPI: Battery Slot [BAT1] (battery present)
[    2.760563] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.760569] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.762788] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.762794] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.656377] acpi device:06: registered as cooling_device2
[    3.656890] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.132098] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    5.132102] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.132106] thinkpad_acpi: ThinkPad BIOS 6YET26WW (1.11 ), EC 6YHT20WW-1.165000
[    5.132110] thinkpad_acpi: Lenovo ThinkPad Edge 13"IAL#         , model 01962EG
[    5.160794] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    5.161409] thinkpad_acpi: radio switch found; radios are enabled
[    5.161479] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    5.165228] thinkpad_acpi: asked for hotkey mask 0x04018070, but firmware forced it to 0x00018070
[    5.184120] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.186297] Registered led device: tpacpi::thinklight
[    5.186352] Registered led device: tpacpi::power
[    5.186384] Registered led device: tpacpi::standby
[    5.186411] Registered led device: tpacpi::thinkvantage
[    5.198619] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.210263] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8

In pm-powersave.log ist eindeutig zu sehen, daß der Netzteilmodus zieht. Du kannst provisorisch die Einstellungen für den Akkubetrieb erzwingen mit

sudo tlp bat

Noch eine Idee wäre, den upowerd mal neu zu starten:

sudo killall upowerd
sudo /usr/lib/upower/upowerd &

Das hier sieht auch nicht sauber aus:

[    2.071173] ACPI: Battery Slot [BAT1] (battery present)

Der Hauptakku ist normalerweise BAT0.

Ohne BIOS-Update kommen wir hier leider nicht weiter. Die von mir verlinkte Methode funktioniert sicherlich auch nicht in allen Fällen zuverlässig. Am Ende des Artikels unter "Quellen" sind zwei Links. Lies dich mal dort ein oder besorg dir halt ein Laufwerk.

Du könntest auch im ThinkPad-Forum einen Thread aufmachen, um nach Erfahrungen mit dem BIOS-Update beim Edge zu fragen.

okay, ich versuche dann mal an ein externes optisches Laufwerk zu kommen.

laut Gnome Powermanager hab ich durch

tlp bat

ungf eine Stunde längere Laufzeit (sonst ca 4h45 mins, jetzt knapp 6) ☺ das ist ja schonmal ein Fortschritt. Die Links hab ich mir alle angeschaut und noch 1-2 andere Methoden probiert, über meine SSD das BIOS-Update zu machen, die aber alle fehlschlagen.

Komisch ist halt nur, dass er das Menü und alles drum und dran startet, der eigentliche Updatevorgang jedoch anscheinend nicht ein Bit im BIOS-ROM setzt. Naja, kann ich auch nicht ändern ☺

Note: I used the method, described below to update the BIOS on my X200. It may or may not work for you, even if the BIOS Update (Bootable CD) iso-image has the same structure. It is not clear what is the root of the problem, but in some cases PC-DOS, used by Lenovo, hangs when booted via memdisk. The location from which memdisk is loaded (harddrive, USB-stick, or cdrom) also matters (for X200, harddrive works but USB-stick hangs).

schonmal Vielen Dank für deine Bemühungen und ich melde mich wieder, wenns was Neues gibt.

lg

so, nachdem ich jetzt die ganze Sache mit USB-Stick probiert hab ging es auch endlich ☺ (http://www.thinkwiki.org/wiki/BIOS_Upgrade dort der Abschnitt mit grub4dos) jetzt hab ich die aktuelle BIOS-Version drauf, scheinbar was geändert hat sich aber nicht, bin i-wie trotzdem im AC-Modus, wenn ich mit Akku starte.

EDIT:

nochmal die ganzen Ausgaben:

[    0.000000]  BIOS-e820: 00000000b5f63000 - 00000000b5f9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b5fe1000 - 00000000b5ffd000 (ACPI data)
[    0.000000]  modified: 00000000b5f63000 - 00000000b5f9f000 (ACPI NVS)
[    0.000000]  modified: 00000000b5fe1000 - 00000000b5ffd000 (ACPI data)
[    0.000000] ACPI: RSDP 00000000000f6ee0 00024 (v04 PTLTD )
[    0.000000] ACPI: XSDT 00000000b5ff2cfd 0006C (v01 LENOVO TP-6Y    00001160  LTP 00000000)
[    0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 LENOVO TP-6Y    00001160 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000b5fe6000 09E8D (v02 LENOVO TP-6Y    00001160 INTL 20050624)
[    0.000000] ACPI: FACS 00000000b5f9efc0 00040
[    0.000000] ACPI: HPET 00000000b5ffcd86 00038 (v01 LENOVO TP-6Y    00001160 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000b5ffcdbe 0003C (v01 LENOVO TP-6Y    00001160 LOHR 0000005A)
[    0.000000] ACPI: APIC 00000000b5ffcdfa 00068 (v01 LENOVO TP-6Y    00001160  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000b5ffce62 00028 (v01 LENOVO TP-6Y    00001160  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000b5ffce8a 00176 (v01 LENOVO TP-6Y    00001160  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000]   #10 [0000012000 - 0000016000]     ACPI WAKEUP
[    0.023332] ACPI: Core revision 20100428
[    0.331439] ACPI: bus type pci registered
[    0.343939] ACPI: EC: Look up EC in DSDT
[    0.362020] ACPI: BIOS _OSI(Linux) query ignored
[    0.364822] ACPI: SSDT 00000000b5f1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.365820] ACPI: Dynamic OEM Table Load:
[    0.365826] ACPI: SSDT (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.366243] ACPI: SSDT 00000000b5f19620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.367213] ACPI: Dynamic OEM Table Load:
[    0.367218] ACPI: SSDT (null) 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.368066] ACPI: SSDT 00000000b5f1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.369088] ACPI: Dynamic OEM Table Load:
[    0.369093] ACPI: SSDT (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.369375] ACPI: SSDT 00000000b5f1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.370380] ACPI: Dynamic OEM Table Load:
[    0.370385] ACPI: SSDT (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.372339] ACPI: Interpreter enabled
[    0.372344] ACPI: (supports S0 S3 S4 S5)
[    0.372389] ACPI: Using IOAPIC for interrupt routing
[    0.374908] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.506877] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.506877] ACPI: No dock devices found.
[    0.506877] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.506877] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.531087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.531372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.531613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.531755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.531898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.532056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.561620] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.561832] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.562042] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.562248] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.562467] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.562675] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.562882] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.563089] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.564270] ACPI: WMI: Mapper loaded
[    0.564274] PCI: Using ACPI for IRQ routing
[    0.594813] pnp: PnP ACPI init
[    0.594839] ACPI: bus type pnp registered
[    0.599152] pnp: PnP ACPI: found 10 devices
[    0.599157] ACPI: ACPI bus type pnp unregistered
[    0.740596] ACPI: AC Adapter [ACAD] (on-line)
[    0.746802] ACPI: Lid Switch [LID]
[    0.746877] ACPI: Power Button [PWRB]
[    0.746949] ACPI: Power Button [PWRF]
[    0.747686] ACPI: acpi_idle registered with cpuidle
[    1.761773] ACPI: Thermal Zone [TZ00] (56 C)
[    2.050849] ACPI: Battery Slot [BAT1] (battery present)
[    2.743046] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.743053] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.745263] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.745269] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.677628] acpi device:06: registered as cooling_device2
[    3.678288] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.409801] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    5.409805] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.409809] thinkpad_acpi: ThinkPad BIOS 6YET33WW (1.16 ), EC 6YHT26WW-1.171000
[    5.409812] thinkpad_acpi: Lenovo ThinkPad Edge, model 01962EG
[    5.413091] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    5.413706] thinkpad_acpi: radio switch found; radios are enabled
[    5.413776] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    5.417744] thinkpad_acpi: asked for hotkey mask 0x04018070, but firmware forced it to 0x00018070
[    5.433449] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.435579] Registered led device: tpacpi::thinklight
[    5.435980] Registered led device: tpacpi::power
[    5.436356] Registered led device: tpacpi::standby
[    5.436731] Registered led device: tpacpi::thinkvantage
[    6.017266] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    6.054176] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8

Running hook /etc/pm/power.d/95hdparm-apm false:
notice: /usr/lib/pm-utils/power.d/95hdparm-apm disabled by tlp.

/etc/pm/power.d/95hdparm-apm false: success.
Running hook /usr/lib/pm-utils/power.d/anacron false:

/usr/lib/pm-utils/power.d/anacron false: success.
Running hook /etc/pm/power.d/disable_wol false:
notice: /usr/lib/pm-utils/power.d/disable_wol disabled by tlp.

/etc/pm/power.d/disable_wol false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:

/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /etc/pm/power.d/intel-audio-powersave false:
notice: /usr/lib/pm-utils/power.d/intel-audio-powersave disabled by tlp.

/etc/pm/power.d/intel-audio-powersave false: success.
Running hook /etc/pm/power.d/journal-commit false:
notice: /usr/lib/pm-utils/power.d/journal-commit disabled by tlp.

/etc/pm/power.d/journal-commit false: success.
Running hook /etc/pm/power.d/laptop-mode false:
notice: /usr/lib/pm-utils/power.d/laptop-mode disabled by tlp.

/etc/pm/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:

/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.

/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /etc/pm/power.d/sata_alpm false:
notice: /usr/lib/pm-utils/power.d/sata_alpm disabled by tlp.

/etc/pm/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /etc/pm/power.d/wireless false:
notice: /usr/lib/pm-utils/power.d/wireless disabled by tlp.

/etc/pm/power.d/wireless false: success.
Running hook /etc/pm/power.d/xfs_buffer false:
notice: /usr/lib/pm-utils/power.d/xfs_buffer disabled by tlp.

/etc/pm/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/zztlp false:

/usr/lib/pm-utils/power.d/zztlp false: success.

Wenn das BIOS nicht mitspielt, bleibt nur den Workaround permament zu machen, indem Du ihn in rc.local aufnimmst

tlp bat

oder alternativ die auf _AC endenden Einstellungen an die _BAT-Einstellungen anpaßt.

Es gibt noch acpi-fix. Das setzt aber recht fortgeschrittene Kenntnisse und den Bau eines selbst gepatchten Kernels voraus.