TheByte
Anmeldungsdatum: 15. April 2015
Beiträge: Zähle...
|
Hallo liebe Community,
ich habe mich jetzt paar stunden mit samba beschäftigt hab einiges freigegeben etc. aber jedes mal wenn ich irgendetwas von der 2. Festplatte freigeben will macht er probleme bzw. die probleme sind wenn ich mit meinem win7 pc versuche darauf zu verbinden. Auf \\SERVERNAME\ORDNERNAME konnte nicht zugegriffen werden. sie haben keine Berechtigung für den Zugriff auf \\SERVERNAME\ORDNERNAME.
Wenden Sie sich an den Netzwerkadministrator, um den Zugriff anzufordern. Der Ordner und alle anderen Ordner sind für jeden freigeschaltet auf die festplatte 1 kann ich zugreifen ohne probleme Wie kann ich das Problem lösen ?
Ich arbeite mit swat weil ich bei den anderen sachen nicht so durchblicke aber bin für alles offen danke ^^ Brauch ich noch was erwähnen falls ja einfach reinschreiben dann kommt alles Moderiert von jug: Thema in einen passenderen Forenbereich verschoben.
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7964
|
Wird die 2. Platte statisch eingebunden (z.B. mit einem Eintrag in /etc/fstab oder /etc/rc.local, oder erst dynamisch beim ersten Zugriff über den Dateimanager? Was für ein Dateisystem (ext4, VFAT, NTFS...) ist denn auf der Platte?
Ich arbeite mit swat weil ich bei den anderen sachen nicht so durchblicke
Von SWAT muss derzeit dringend abgeraten werden, da es überhaupt nicht mehr aktuell ist. Ob eine Aktualisierung noch geplant ist, weiß ich nicht. Ich bezweifle es. – In /usr/share/samba sollte sich noch eine Musterdatei für smb.conf befinden, die nicht von SWAT zerschossen ist. Ersetze am besen die von SWAT angelegte Datei /etc/samba/smb.conf durch diese Musterdatei und gehe dann nach dem Wiki-Artikel Samba Server GNOME vor. Dafür brauchst Du Root-Rechte. Dort findest Du auch ein graphisches Tool system-config-samba, das für Deine Zwecke viel besser geeignet ist als SWAT oder Gadmin-Samba. Gruß – Max-Ulrich
|
TheByte
(Themenstarter)
Anmeldungsdatum: 15. April 2015
Beiträge: 9
|
1. die zweite Festplatte ist dynamisch 2. dateisystem ist ext4 3. danke wusste ich nicht aber selbst mit vielen tutorials hat es nicht geklappt das ich drauf zugreifen kann erst mit swat konnte ich dann zumindest sachen auf der 1. Festplatte so freigeben das es nicht nur auf meinem windows rechner angezeigt hat sondern ich auch drauf zugreifen konnte
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7964
|
die zweite Festplatte ist dynamisch
Dies ist vermutlich das Problem. Denn dann ist die Platte beim Freigeben möglicherweise noch gar nicht eingebunden, und dann klappt nichts. Platten, die man freigeben möchte, sollte man deshalb immer statisch einbinden, z.B. eben mit einem Eintrag in /etc/fstab oder in /etc/rc.local. Alternativ kannst Du die Platte auch mittels Gigolo automatisch beim Einloggen einbinden und sie dann "Persönlich" freigeben. Für "Administrative Freigaben" klappt das allerdings nicht, weil Gigolo dafür zu spät kommt. Wenn die Freigaben bei Dir mit swat geklappt haben, dann hast Du Glück gehabt. Dann lasse es so; "never touch a running system".
|
TheByte
(Themenstarter)
Anmeldungsdatum: 15. April 2015
Beiträge: 9
|
Danke ich werde es gleich morgen in der früh probieren und das ergebnis als edit in diesen beitrag schreiben bin gespannt ^^ nochmals danke Edit: Hat nicht geklappt ☹ ich bin zu blöd dazu kanst du mir eine anleitung geben wie ich die Platte statisch mache ich glaub da klappt es nicht ansonsten hab ich keine ahnung mehr ich bin verzweifelt ☹
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7964
|
ansonsten hab ich keine ahnung mehr ich bin verzweifelt ☹
Linux ist halt von Grund auf verschieden von Windows. Das kann man nicht in ein paar Tagen lernen, da braucht man Geduld. Aber es ging uns allen so, ein Grund zu verzweifeln ist das nicht.
Bitte poste mal, was Du gleich nach dem Hochfahren – also bevor Du mit dem Dateimanager (Nautilus?) auf HDD2 zugegriffen hast – als Ausgabe bekommst, wenn Du im Terminal den Befehl mount eingibst. Außerdem sind noch die Ausgabern nach folgendne Befehlen nützlich:
mount
sudo blkid
cat /etc/fstab
cat /etc/samba/smb.conf
net usershare info -L
Damit die Ausgaben lesbar erscheinen (wichtig!), solltest Du sie unbedingt als Codeblöcke posten (3. Symbol v.r.). Du kannst sie vom Terminal mittels "Drag and Drop" übertragen.
|
TheByte
(Themenstarter)
Anmeldungsdatum: 15. April 2015
Beiträge: 9
|
Ok hier
mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/home/alpi/.Private on /home/alpi type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=b43f13b248148d78,ecryptfs_fnek_sig=89cebc256e9c3af8)
gvfs-fuse-daemon on /home/alpi/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=alpi)
sudo blkid:
/dev/sda1: UUID="36f5d65d-73f1-4cb3-8534-2b19d6bf7543" TYPE="ext4"
/dev/sdb1: LABEL="NET-01" UUID="aa13d80f-aa12-4c04-81d0-9b851d3e514a" TYPE="ext4"
/dev/sdc1: LABEL="NET-02" UUID="7d4b8632-60e4-48d3-8ac4-fa62712bb1f1" TYPE="ext4"
/dev/mapper/cryptswap1: UUID="69dbf71c-eefb-4ce6-a652-57d0a8a47bce" TYPE="swap"
cat /etc/fstab:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=36f5d65d-73f1-4cb3-8534-2b19d6bf7543 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
#UUID=d6190331-8316-4147-89a3-81a6439b2b47 none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
sudo cat /etc/samba/smb.conf:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
; passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
# A sample share for sharing your CD-ROM with others.
[cdrom]
comment = Samba server's CD-ROM
; read only = yes
locking = no
path = /cdrom
guest ok = yes
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
[srv]
comment = "Meine Freigabe" ## optional
path = /srv
; browseable = yes
guest ok = yes
writeable = yes
[Ubuntu-HDD02]
path = /media/NET-02/Ubuntu-HDD02
writeable = no
browseable = yes
guest ok = yes
read only = yes
sudo net usershare info -L:
gibt nichts aus ich glaube das ist auch gewollt 😀
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7964
|
Die Diagnose ist klar: mount:
Es ist insgesamt nur eine Platte bzw. Partition eingebunden. Was nicht eingebunden ist, kann auch nicht freigegeben werden (logisch...) sudo blkid:
Es existieren zwei weitere Partitionen sdb1 und sdc1 . Freigeben möchtest Du wohl sdc1 mit dem Label NET-02 . cat /etc/fstab:
Bestätigt das Ergebnis von mount . cat /etc/samba/smb.conf:
Es ist wieder die Original-Datei, ohne von SWAT verursachte Schäden. Es gibt darin nur die eine Freigabe Namens [Ubuntu-HDD02].
Am besten gehst Du nun so vor:
Überprüfe direkt nach einem Neustart, ob der Ordner /media/NET-02 vorhanden ist. Wenn nicht, dann gib im Terminal folgende Zeile ein Dann gib folgende Zeile ein: Wenn eine Fehlermeldung kommt, dann führe zuerst folgende Befehlszeile aus sudo apt-get install gksu und wiederhole anschließend obige Zeile. Füge jetzt als zweitletzte Zeile der Datei fstab folgende Zeile ein: # Festplatte HDD2
UUID=7d4b8632-60e4-48d3-8ac4-fa62712bb1f1 /media/NET-02 ext4 defaults 0 1 und speichere die Datei Gib nun folgende Befehlszeile ein gksudo gedit /etc/samba/smb.conf und ändere die Zeile path = /media/NET-02/Ubuntu-HDD02 in path = /media/NET-02
Wenn ich jetzt nichts vergessen habe, sollte nach einem Neustart alles funktionieren. Noch eine Frage: Was machst Du eigentlich mit der Platte sdb1 mit Label NET-01 ? Wenn die auch freigegeben werden soll, solltest Du auch diese entsprechend statisch einbinden:
# Festplatte HDD3 (?)
UUID=aa13d80f-aa12-4c04-81d0-9b851d3e514a /media/NET-01 ext4 defaults 0 1 Gruß – Max-Ulrich
|
TheByte
(Themenstarter)
Anmeldungsdatum: 15. April 2015
Beiträge: 9
|
Jetzt ist die festplatte gleich nach dem neustart erreichbar aber es funktioniert immernoch nicht :/
|
Max-Ulrich_Farber
Anmeldungsdatum: 23. Januar 2007
Beiträge: 7964
|
es funktioniert immernoch nicht
Was hast Du jetzt ganz genau probiert, und welche Fehlermeldungen hast Du erhalten? Was bekommst Du jetzt bei
Möglicherweise hast Du für den Benutzer, der auf dem Windows-PC eingeloggt ist, auf dem Samba-Server gar keinen eigenen Samba-Account eingerichtet? Zur Kontrolle kannst Du mal die Ausgabe von posten. Da müsste dieser Benutzer erscheinen. Wenn nicht, dann kannst Du den Samba-Account entweder über system-config-samba (siehe Samba Server GNOME) oder im Terminal mittels sudo smbpasswd -a <Benutzername> einrichten. Wichtig: Für den betreffenden Benutzer muss auch auf dem Server ein System-Account bestehen, sonst kann man dort keinen Samba-Account einrichten. Alternativ kann man auch den Gast-Zugang benützen. Würde ich aber in diesem Fall nicht tun. Und Du denkst daran, dass Windows auf Veränderungen im Netzwerk nicht sofort reagiert, sondern erst etwas später oder nach einem Neustart?
|
TheByte
(Themenstarter)
Anmeldungsdatum: 15. April 2015
Beiträge: 9
|
Das weiss ich zwar nur ich hab es zum test mit einem gast account versucht leider geht es nicht ich bin gerade nicht daheim schreibe dir am Montag die meldug
|