Hallo,
ich habe das Gefühl mein System startet immer langsamer. Ich nutze seit ca. zwei Jahren die gleiche Installation (natürlich mit Updates und Upgrades) und früher ging der Start schneller.
Es dauert mittlerweile fast drei Minuten.
Ich teile den Start mal in drei Phasen ein: Als erstes kommt ja die Phase, wo der Balken unter dem Kubuntu-Schriftzug hin u. her läuft. Wenn ich hier mit ALT-F1 in den "Textmodus" wechsele, sehe ich, dass nichts passiert. Oben steht, welcher Kernel gewählt wurde, noch ein paar Infos zum Kernel glaube ich und darunter "Loading, please wait...". Dauert ca. 30 sek. wobei der Balken teilweise lange stehenbleibt aber nichts ersichtliches passiert.
Dann kommt die Phase wo sich der Balken von links nach rechts aufbaut, das passiert dann auch im Textmodus etwas (Hardware laden usw.). Es fängt an mit: "* Reading files needed to boot" Dauer: ca. 45-50sek.
Nach dem Anmelden im Displaymanager dauert es auch nochmal eine Weile, aber das ist wohl die Schuld von KDE. Viell. kann man aber auch hier was machen. Dauer ca. 75 sek.
Nach dem Systemstart ist dann nach kurzer Zeit manchmal (viell. jedes 10. Mal) die Platte ordentlich am arbeiten. Ich habe noch nicht rausfinden können, woran das liegt.
Ich habe leider keine Ahnung wo ich anfangen soll. Warum dauert es z,.B. in der ersten Phase so lang.
Meine Systeminstallation (root Partition) ist mittlerweile auch auf knapp 10 GB angewachsen, ich kann aber auch hier keinen wirklich großen Brocken finden.
Kann man irgendwie mit einem Tool den Systemstart tracen? Ich kann nach dem Start noch nicht mal im Textmodus hochscrollen. Das geht doch irgendwie, mit Umsch+Bild hoch oder?
dmesg ausgabe:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 | [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 (Ubuntu 2.6.24-23.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe80000 (usable) [ 0.000000] BIOS-e820: 000000003fe80000 - 000000003fe89000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe89000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261760) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261760 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261760 [ 0.000000] On node 0 totalpages: 261760 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32131 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6970 checksum 0 [ 0.000000] ACPI: RSDP 000F6970, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FE80F79, 0044 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FE88E8A, 0074 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: DSDT 3FE817F3, 7697 (r1 INTEL ALVISO 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FE99FC0, 0040 [ 0.000000] ACPI: APIC 3FE88EFE, 0066 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: HPET 3FE88F64, 0038 (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: MCFG 3FE88F9C, 003C (r1 INTEL ALVISO 6040000 LOHR 5F) [ 0.000000] ACPI: BOOT 3FE88FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FE813AE, 0235 (r1 PmRef Cpu0Ist 3000 INTL 20030224) [ 0.000000] ACPI: SSDT 3FE811D6, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030224) [ 0.000000] ACPI: SSDT 3FE80FBD, 0219 (r1 PmRef CpuPm 3000 INTL 20030224) [ 0.000000] ACPI: DMI detected: Acer [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 255, address 0xfec20000, GSI 24-279 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259715 [ 0.000000] Kernel command line: root=UUID=60338525-4646-4342-b175-7150b4cf63e7 ro quiet splash noresume [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] mapped IOAPIC to ffff9000 (fec20000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.029 MHz processor. [ 7.227133] Console: colour VGA+ 80x25 [ 7.227137] console [tty0] enabled [ 7.227441] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 7.227851] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.257471] Memory: 1025512k/1047040k available (2179k kernel code, 20864k reserved, 1008k data, 368k init, 129536k highmem) [ 7.257479] virtual kernel memory layout: [ 7.257480] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 7.257481] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.257483] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.257484] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.257485] .init : 0xc0423000 - 0xc047f000 ( 368 kB) [ 7.257486] .data : 0xc0320c78 - 0xc041cdc4 (1008 kB) [ 7.257487] .text : 0xc0100000 - 0xc0320c78 (2179 kB) [ 7.257491] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.257525] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 7.337516] Calibrating delay using timer specific routine.. 3460.93 BogoMIPS (lpj=6921866) [ 7.337539] Security Framework initialized [ 7.337546] SELinux: Disabled at boot. [ 7.337559] AppArmor: AppArmor initialized [ 7.337564] Failure registering capabilities with primary security module. [ 7.337572] Mount-cache hash table entries: 512 [ 7.337688] Initializing cgroup subsys ns [ 7.337693] Initializing cgroup subsys cpuacct [ 7.337703] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 7.337713] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.337716] CPU: L2 cache: 2048K [ 7.337719] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000 [ 7.337728] Compat vDSO mapped to ffffe000. [ 7.337738] Checking 'hlt' instruction... OK. [ 7.353878] SMP alternatives: switching to UP code [ 7.355677] Freeing SMP alternatives: 11k freed [ 7.355783] Early unpacking initramfs... done [ 7.725758] ACPI: Core revision 20070126 [ 7.725834] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 7.730174] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 7.730191] Total of 1 processors activated (3460.93 BogoMIPS). [ 7.731608] ENABLING IO-APIC IRQs [ 7.731798] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.877368] Brought up 1 CPUs [ 7.877406] CPU0 attaching sched-domain: [ 7.877409] domain 0: span 01 [ 7.877410] groups: 01 [ 7.877565] net_namespace: 64 bytes [ 7.877574] Booting paravirtualized kernel on bare hardware [ 7.878011] Time: 19:33:09 Date: 09/21/09 [ 7.878034] NET: Registered protocol family 16 [ 7.878216] EISA bus registered [ 7.878237] ACPI: bus type pci registered [ 7.878634] PCI: PCI BIOS revision 2.10 entry at 0xfd7be, last bus=7 [ 7.878636] PCI: Using configuration type 1 [ 7.878647] Setting up standard PCI resources [ 7.883603] ACPI: EC: Look up EC in DSDT [ 8.189442] ACPI: Interpreter enabled [ 8.189445] ACPI: (supports S0 S3 S4 S5) [ 8.189457] ACPI: Using IOAPIC for interrupt routing [ 8.189781] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 8.232902] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 8.232905] ACPI: EC: driver started in interrupt mode [ 8.232943] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.233486] Force enabled HPET at base address 0xfed00000 [ 8.233491] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 8.233495] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 8.234064] PCI: Transparent bridge - 0000:00:1e.0 [ 8.234138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.234454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 8.234587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 8.234715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 8.234857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 8.239193] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 8.239291] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 8.239387] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 8.239483] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 8.239580] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 8.239676] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 8.239772] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 8.239868] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 8.239990] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.240020] pnp: PnP ACPI init [ 8.240027] ACPI: bus type pnp registered [ 8.242313] pnp: PnP ACPI: found 8 devices [ 8.242316] ACPI: ACPI bus type pnp unregistered [ 8.242319] PnPBIOS: Disabled by ACPI PNP [ 8.242524] PCI: Using ACPI for IRQ routing [ 8.242526] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.242531] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 [ 8.242534] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 8.242536] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 [ 8.242538] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 8.242541] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 [ 8.242543] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 [ 8.242545] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 [ 8.242547] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 8.242550] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 8.261211] NET: Registered protocol family 8 [ 8.261213] NET: Registered protocol family 20 [ 8.261363] hpet clockevent registered [ 8.261368] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 8.261372] hpet0: 3 64-bit timers, 14318180 Hz [ 8.262405] AppArmor: AppArmor Filesystem Enabled [ 8.265178] Time: tsc clocksource has been installed. [ 8.273208] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 8.273212] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved [ 8.273215] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved [ 8.273218] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved [ 8.273221] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved [ 8.273224] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 8.273231] system 00:04: ioport range 0x680-0x6ff has been reserved [ 8.273233] system 00:04: ioport range 0x800-0x80f has been reserved [ 8.273236] system 00:04: ioport range 0x1000-0x107f has been reserved [ 8.273239] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 8.273242] system 00:04: ioport range 0x1600-0x167f has been reserved [ 8.303624] PCI: Bridge: 0000:00:01.0 [ 8.303626] IO window: 3000-3fff [ 8.303630] MEM window: c8100000-c81fffff [ 8.303633] PREFETCH window: d0000000-d7ffffff [ 8.303636] PCI: Bridge: 0000:00:1c.0 [ 8.303637] IO window: disabled. [ 8.303641] MEM window: disabled. [ 8.303644] PREFETCH window: disabled. [ 8.303648] PCI: Bridge: 0000:00:1c.1 [ 8.303650] IO window: disabled. [ 8.303653] MEM window: disabled. [ 8.303657] PREFETCH window: disabled. [ 8.303661] PCI: Bridge: 0000:00:1c.2 [ 8.303662] IO window: disabled. [ 8.303666] MEM window: disabled. [ 8.303669] PREFETCH window: disabled. [ 8.303679] PCI: Bus 7, cardbus bridge: 0000:06:01.0 [ 8.303681] IO window: 00001400-000014ff [ 8.303685] IO window: 00002800-000028ff [ 8.303689] PREFETCH window: 50000000-53ffffff [ 8.303694] MEM window: 54000000-57ffffff [ 8.303697] PCI: Bridge: 0000:00:1e.0 [ 8.303699] IO window: disabled. [ 8.303703] MEM window: c8200000-c82fffff [ 8.303706] PREFETCH window: disabled. [ 8.303722] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.303727] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 8.303741] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 8.303747] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.303762] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 8.303767] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.303782] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 8.303788] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 8.303797] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 8.303809] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 8.303821] NET: Registered protocol family 2 [ 8.341206] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 8.341421] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 8.342167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 8.342604] TCP: Hash tables configured (established 131072 bind 65536) [ 8.342607] TCP reno registered [ 8.353295] checking if image is initramfs... it is [ 8.764994] Switched to high resolution mode on CPU 0 [ 9.078040] Freeing initrd memory: 7721k freed [ 9.078399] Simple Boot Flag at 0x36 set to 0x1 [ 9.078817] audit: initializing netlink socket (disabled) [ 9.078833] audit(1253561589.716:1): initialized [ 9.078996] highmem bounce pool size: 64 pages [ 9.080839] VFS: Disk quotas dquot_6.5.1 [ 9.080912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.081048] io scheduler noop registered [ 9.081050] io scheduler anticipatory registered [ 9.081052] io scheduler deadline registered [ 9.081063] io scheduler cfq registered (default) [ 9.081147] Boot video device is 0000:01:00.0 [ 9.081259] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 9.081287] assign_interrupt_mode Found MSI capability [ 9.081313] Allocate Port Service[0000:00:01.0:pcie00] [ 9.081384] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 9.081418] assign_interrupt_mode Found MSI capability [ 9.081446] Allocate Port Service[0000:00:1c.0:pcie00] [ 9.081478] Allocate Port Service[0000:00:1c.0:pcie02] [ 9.081550] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 9.081584] assign_interrupt_mode Found MSI capability [ 9.081612] Allocate Port Service[0000:00:1c.1:pcie00] [ 9.081643] Allocate Port Service[0000:00:1c.1:pcie02] [ 9.081714] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 9.081748] assign_interrupt_mode Found MSI capability [ 9.081776] Allocate Port Service[0000:00:1c.2:pcie00] [ 9.081808] Allocate Port Service[0000:00:1c.2:pcie02] [ 9.082044] isapnp: Scanning for PnP cards... [ 9.435151] isapnp: No Plug & Play device found [ 9.461256] Real Time Clock Driver v1.12ac [ 9.461357] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.461886] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 19 [ 9.461895] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 9.462505] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.462572] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 9.462660] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 9.464734] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.464739] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.468752] mice: PS/2 mouse device common for all mice [ 9.468857] EISA: Probing bus 0 at eisa.0 [ 9.468863] Cannot allocate resource for EISA slot 1 [ 9.468866] Cannot allocate resource for EISA slot 2 [ 9.468868] Cannot allocate resource for EISA slot 3 [ 9.468884] EISA: Detected 0 cards. [ 9.468887] cpuidle: using governor ladder [ 9.468889] cpuidle: using governor menu [ 9.468976] NET: Registered protocol family 1 [ 9.469001] Using IPI No-Shortcut mode [ 9.469034] registered taskstats version 1 [ 9.469126] Magic number: 9:641:597 [ 9.469158] hash matches device ptyd1 [ 9.469217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 9.469219] EDD information not available. [ 9.469404] Freeing unused kernel memory: 368k freed [ 9.469431] Write protecting the kernel read-only data: 806k [ 9.508604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 10.665875] fuse init (API version 7.9) [ 10.686556] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 10.686562] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.686575] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126] [ 10.691557] ACPI: Thermal Zone [THRM] (47 C) [ 11.265796] usbcore: registered new interface driver usbfs [ 11.265821] usbcore: registered new interface driver hub [ 11.267818] usbcore: registered new device driver usb [ 11.280715] USB Universal Host Controller Interface driver v3.0 [ 11.280779] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 11.280790] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.280794] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.281117] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.281146] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 11.281277] usb usb1: configuration #1 chosen from 1 choice [ 11.281299] hub 1-0:1.0: USB hub found [ 11.281304] hub 1-0:1.0: 2 ports detected [ 11.383825] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 [ 11.383838] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 11.383843] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.383866] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 11.383895] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 11.384003] usb usb2: configuration #1 chosen from 1 choice [ 11.384026] hub 2-0:1.0: USB hub found [ 11.384032] hub 2-0:1.0: 2 ports detected [ 11.419906] SCSI subsystem initialized [ 11.455689] libata version 3.00 loaded. [ 11.487772] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 11.487785] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.487789] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.487812] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.487841] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 11.487950] usb usb3: configuration #1 chosen from 1 choice [ 11.487973] hub 3-0:1.0: USB hub found [ 11.487978] hub 3-0:1.0: 2 ports detected [ 11.591728] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 11.591740] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 11.591744] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.591768] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 11.591796] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 11.591898] usb usb4: configuration #1 chosen from 1 choice [ 11.591920] hub 4-0:1.0: USB hub found [ 11.591926] hub 4-0:1.0: 2 ports detected [ 11.695769] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 11.695782] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 11.695786] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 11.695810] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 11.699705] ehci_hcd 0000:00:1d.7: debug port 1 [ 11.699711] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 11.699718] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8000000 [ 11.727596] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 11.739556] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.739666] usb usb5: configuration #1 chosen from 1 choice [ 11.739690] hub 5-0:1.0: USB hub found [ 11.739696] hub 5-0:1.0: 8 ports detected [ 11.847822] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.867531] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 11.867538] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 11.867544] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 11.907527] ssb: Sonics Silicon Backplane found on PCI device 0000:06:08.0 [ 11.907548] b44.c:v2.0 [ 11.907577] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 11.907608] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 11.907620] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 11.927755] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:ee:3d:04 [ 11.939513] ata_piix 0000:00:1f.1: version 2.12 [ 11.939528] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 11.939557] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 11.943465] scsi0 : ata_piix [ 11.953659] scsi1 : ata_piix [ 11.953920] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 11.953923] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 12.259313] Clocksource tsc unstable (delta = -31312707398 ns) [ 12.263305] Time: hpet clocksource has been installed. [ 12.263512] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 12.266091] ata1.00: ATA-6: TOSHIBA MK8025GAS, KA023A, max UDMA/100 [ 12.266094] ata1.00: 156301488 sectors, multi 16: LBA [ 12.266119] ata1.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.50, max UDMA/33 [ 12.266846] ata1.00: configured for UDMA/100 [ 12.272382] usb 2-2: configuration #1 chosen from 1 choice [ 12.287411] usbcore: registered new interface driver hiddev [ 12.288981] ata1.01: configured for UDMA/33 [ 12.289022] ata2: port disabled. ignoring. [ 12.289144] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5 [ 12.289685] scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.50 PQ: 0 ANSI: 5 [ 12.296472] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2 [ 12.300204] Driver 'sd' needs updating - please use bus_type methods [ 12.300277] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 12.300289] sd 0:0:0:0: [sda] Write Protect is off [ 12.300292] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.300307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.300352] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 12.300362] sd 0:0:0:0: [sda] Write Protect is off [ 12.300364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.300380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.300383] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 12.306191] input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2 [ 12.306206] usbcore: registered new interface driver usbhid [ 12.306210] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 12.324825] sda1 sda2 < sda5 sda6 sda7 > [ 12.326349] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.331903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.331921] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 12.337649] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 12.337653] Uniform CD-ROM driver Revision: 3.20 [ 12.337698] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 12.470554] kjournald starting. Commit interval 5 seconds [ 12.470563] EXT3-fs: mounted filesystem with ordered data mode. [ 14.074958] udev: starting version 141 [ 14.749069] Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066] [ 14.749087] Yenta: Enabling burst memory read transactions [ 14.749091] Yenta: Using CSCINT to route CSC interrupts to PCI [ 14.749093] Yenta: Routing CardBus interrupts to PCI [ 14.749098] Yenta TI: socket 0000:06:01.0, mfunc 0x01c21b22, devctl 0x66 [ 14.753680] input: Power Button (FF) as /devices/virtual/input/input3 [ 14.757607] ACPI: Power Button (FF) [PWRF] [ 14.757691] input: Lid Switch as /devices/virtual/input/input4 [ 14.757783] ACPI: Lid Switch [LID] [ 14.757827] input: Power Button (CM) as /devices/virtual/input/input5 [ 14.762381] ACPI: Power Button (CM) [PWRB] [ 14.762452] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 14.766064] ACPI: Sleep Button (CM) [SLPB] [ 14.768589] ACPI: AC Adapter [ACAD] (on-line) [ 14.768619] ACPI: WMI-Acer: Mapper loaded [ 14.772690] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 [ 14.774745] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 14.775690] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 14.783544] Linux agpgart interface v0.102 [ 14.784821] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 14.784824] Socket status: 30000006 [ 14.784827] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08 [ 14.784832] pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff [ 14.801643] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 14.824659] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [ 14.824698] [fglrx] ASYNCIO init succeed! [ 14.825596] [fglrx] PAT is enabled successfully! [ 14.825683] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 14.831518] iTCO_vendor_support: vendor-support=0 [ 14.832935] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 14.832998] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 14.833027] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.885583] ieee80211_crypt: registered algorithm 'NULL' [ 14.889548] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 14.889551] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 14.928198] ACPI: Battery Slot [BAT1] (battery present) [ 14.928254] ACPI: Battery Slot [BAT2] (battery absent) [ 14.952309] intel_rng: FWH not detected [ 14.985856] acer_acpi: Acer Laptop ACPI Extras version 0.11.1 [ 14.985870] acer_acpi: No or unsupported WMI interface, unable to load. [ 14.993129] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 14.993132] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 14.993206] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 14.993868] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 15.129005] ipw2200: Radio Frequency Kill Switch is On: [ 15.129008] Kill switch must be turned off for wireless networking to work. [ 15.130560] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 15.138498] cs: IO port probe 0x100-0x3af: clean. [ 15.139689] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.140189] cs: IO port probe 0x820-0x8ff: clean. [ 15.140611] cs: IO port probe 0xc00-0xcf7: clean. [ 15.141156] cs: IO port probe 0xa00-0xaff: clean. [ 15.185492] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 [ 15.195350] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 15.222831] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17 [ 15.222849] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 15.233642] intel8x0_measure_ac97_clock: measured 54003 usecs [ 15.233645] intel8x0: clocking to 48000 [ 15.368218] Adding 2000052k swap on /dev/sda6. Priority:-1 extents:1 across:2000052k [ 15.436276] EXT3 FS on sda1, internal journal [ 17.947319] audit(1253561622.744:2): type=1505 operation="profile_load" info="unsupported interface version" pid=4448 [ 18.110584] audit(1253561622.904:3): type=1505 operation="profile_load" info="unsupported interface version" pid=4455 [ 18.142190] audit(1253561622.936:4): type=1505 operation="profile_load" info="unsupported interface version" pid=4461 [ 18.365338] ACPI: ACPI Dock Station Driver [ 18.406102] ACPI: \_SB_.PCI0.PATA.PRID.BAY_: found ejectable bay [ 18.406108] ACPI: \_SB_.PCI0.PATA.PRID.BAY_: Adding notify handler [ 18.406137] ACPI: Error installing bay notify handler [ 18.406141] ACPI: Bay [\_SB_.PCI0.PATA.PRID.BAY_] Added [ 19.268092] NET: Registered protocol family 10 [ 19.268297] lo: Disabled Privacy Extensions [ 19.427183] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 19.709990] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.833852] Bluetooth: Core ver 2.11 [ 19.834468] NET: Registered protocol family 31 [ 19.834471] Bluetooth: HCI device and connection manager initialized [ 19.834475] Bluetooth: HCI socket layer initialized [ 19.845323] Bluetooth: L2CAP ver 2.9 [ 19.845328] Bluetooth: L2CAP socket layer initialized [ 19.849686] Bluetooth: SCO (Voice Link) ver 0.6 [ 19.849691] Bluetooth: SCO socket layer initialized [ 19.853942] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 19.853947] Bluetooth: BNEP filters: protocol multicast [ 19.861734] Bridge firewalling registered [ 19.861956] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 19.878794] Bluetooth: RFCOMM socket layer initialized [ 19.878806] Bluetooth: RFCOMM TTY layer initialized [ 19.878808] Bluetooth: RFCOMM ver 1.8 [ 20.068351] lp: driver loaded but no devices found [ 20.118859] ppdev: user-space parallel port driver [ 20.247633] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.688239] b44: eth0: Link is up at 100 Mbps, full duplex. [ 20.688245] b44: eth0: Flow control is off for TX and off for RX. [ 20.689609] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.524962] NET: Registered protocol family 17 [ 21.541913] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.728524] b44: eth0: Link is up at 100 Mbps, full duplex. [ 21.728529] b44: eth0: Flow control is off for TX and off for RX. [ 21.730093] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.148805] eth0: no IPv6 routers present |
Danke, Zappolot