ubuntuusers.de

Terratec Cinergy HT PCI Treiber

Status: Ungelöst | Ubuntu-Version: Ubuntu 7.10 (Gutsy Gibbon)
Antworten |

migru

Anmeldungsdatum:
7. März 2009

Beiträge: Zähle...

Hallo Stephan,

habe mal nachgeschaut: in cx88-card.c wird's im struct "static const struct cx88_board cx88_boards[]" unter "CX88_BOARD_PINNACLE_HYBRID_PCTV" korrekt gesetzt. Also: ".mpeg = CX88_MPEG_DVB" Ich war mir auch nicht ganz sicher, ob es wirklich daran lag, da der DVB-T Receiver ursprünglich ging, dann ging nur der Analoge und nach der Änderung, ging der DVB-T Receiver wieder... Kann also sein, dass es ein anderes Problem gibt...

Viele Grüsse Migru

majestr0ne

Anmeldungsdatum:
15. März 2009

Beiträge: Zähle...

hallo

Wie habt ihr die Karte zum laufen gebracht? Muss ich eine firmware installieren ? Hab es mit v4l und den patch von stephans blog probiert aber ohne erfolg. Bin anscheinend irgendwie zu blöd dafür

danke schon mal im vorraus !!

wienczny

Anmeldungsdatum:
26. November 2008

Beiträge: Zähle...

Ja du musst eine Firmware installieren. Im Header von 'extract_xc3028.pl' steht wie man da dran kommt. Wenn du es einfach haben möchtest, lädst du dir dazu die aktuellen Quellen von http://linuxtv.org/hg/v4l-dvb . Da ist der Patch schon drin. Einfach make menuconfig (sicherstellen das die Karte ausgewählt ist), make, make install. Danach nur noch das neue Modul laden und es sollte alles gehen.

Stephan

XGKubuntu

Anmeldungsdatum:
14. Juni 2009

Beiträge: 5

Hallo miteinander!

Erst einmal vielen Dank an linuxreaktor, wienczny und k1ngf1sher. Ich kann mir gut vorstellen wie lange Ihr benötigt habt, um die Karte zum Laufen zu bringen. Trotz Eurer vielen Beiträge und einer Woche Internetrecherche, habe ich es leider meinerseits noch nicht geschafft (Neid). Meine Kernel-Version ist 2.6.28-11-generic.

Ich scheitere bereits an der Stelle von "linuxreaktors" Gentoo-Befehl "update-modules". Den gibt es bei Ubuntu anscheinend nicht. Auch finde ich den Ordner "/etc/modules.d" nicht.

"Das Kernelmodul lade ich mit den Optionen card=59 tuner=71. Um diese Optionen unter Gentoo automatisch für das Laden des Moduls zu übergeben, habe ich eine Datei unter /etc/modules.d/cx88 angelegt, mit dem Inhalt Anschliessend muss diese Datei >(unter Gentoo) noch mit update-modules geparst werden, damit die Optionen unter /etc/modprobe.conf eingetragen werden.

Also bin ich weiter zu der Lösung von "k1ngf1sher" und "wienczny" gegangen. Hier komme ich aber bei

make menuconfig (sicherstellen das die Karte ausgewählt ist), make, make install

leider nicht weiter.

Hat einer von Euch vielleicht den Nerv das ein wenig ausführlicher zu beschreiben.

Anbei auch meine "dmesg" version:

[    0.565035] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.565038] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.565043] pci 0000:00:01.0:   MEM window: 0xd9e00000-0xd9efffff
[    0.565047] pci 0000:00:01.0:   PREFETCH window: 0x000000b9c00000-0x000000d9cfffff
[    0.565063] pci 0000:00:01.0: setting latency timer to 64
[    0.565068] bus: 00 index 0 io port: [0x00-0xffff]
[    0.565070] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.565072] bus: 01 index 0 io port: [0xc000-0xcfff]
[    0.565074] bus: 01 index 1 mmio: [0xd9e00000-0xd9efffff]
[    0.565076] bus: 01 index 2 mmio: [0xb9c00000-0xd9cfffff]
[    0.565078] bus: 01 index 3 mmio: [0x0-0x0]
[    0.565093] NET: Registered protocol family 2
[    0.565230] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.565674] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.567564] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.568534] TCP: Hash tables configured (established 131072 bind 65536)
[    0.568539] TCP reno registered
[    0.568703] NET: Registered protocol family 1
[    0.568866] checking if image is initramfs... it is
[    1.068143] Switched to high resolution mode on CPU 0
[    1.175604] Freeing initrd memory: 7353k freed
[    1.175728] cpufreq: No nForce2 chipset.
[    1.175911] audit: initializing netlink socket (disabled)
[    1.175941] type=2000 audit(1245023521.172:1): initialized
[    1.183357] highmem bounce pool size: 64 pages
[    1.183365] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.184712] VFS: Disk quotas dquot_6.5.1
[    1.184773] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.185414] fuse init (API version 7.10)
[    1.185507] msgmni has been set to 1724
[    1.185744] alg: No test for stdrng (krng)
[    1.185760] io scheduler noop registered
[    1.185762] io scheduler anticipatory registered
[    1.185764] io scheduler deadline registered
[    1.185782] io scheduler cfq registered (default)
[    1.185800] PCI: VIA PCI bridge detected.Disabling DAC.
[    1.185882] pci 0000:01:00.0: Boot video device
[    1.189652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.189662] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.189815] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.189819] ACPI: Power Button (FF) [PWRF]
[    1.189865] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.189867] ACPI: Power Button (CM) [PWRB]
[    1.189923] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.189931] ACPI: Sleep Button (CM) [SLPB]
[    1.190124] processor ACPI_CPU:00: registered as cooling_device0
[    1.190129] ACPI: Processor [CPU1] (supports 16 throttling states)
[    1.192461] isapnp: Scanning for PnP cards...
[    1.546086] isapnp: No Plug & Play device found
[    1.547565] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.547663] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.547750] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.547981] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.548114] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.548248] serial 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.549322] brd: module loaded
[    1.549679] loop: module loaded
[    1.549783] Fixed MDIO Bus: probed
[    1.549790] PPP generic driver version 2.4.2
[    1.549875] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.549916] Driver 'sd' needs updating - please use bus_type methods
[    1.549926] Driver 'sr' needs updating - please use bus_type methods
[    1.550457] pata_via 0000:00:11.1: version 0.3.3
[    1.550478] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[    1.550790] scsi0 : pata_via
[    1.550930] scsi1 : pata_via
[    1.553344] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.553348] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.724516] ata1.00: ATA-5: ST360021A, 3.75, max UDMA/100
[    1.724519] ata1.00: 117231408 sectors, multi 16: LBA 
[    1.724652] ata1.01: ATA-7: SAMSUNG SV1604N, TR100-30, max UDMA/100
[    1.724655] ata1.01: 312581808 sectors, multi 16: LBA48 
[    1.732391] ata1.00: configured for UDMA/100
[    1.740323] ata1.01: configured for UDMA/100
[    1.904352] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB00, max UDMA/33
[    1.920236] ata2.00: configured for UDMA/33
[    1.921041] scsi 0:0:0:0: Direct-Access     ATA      ST360021A        3.75 PQ: 0 ANSI: 5
[    1.921182] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
[    1.921204] sd 0:0:0:0: [sda] Write Protect is off
[    1.921207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.921239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.921328] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors: (60.0 GB/55.8 GiB)
[    1.921345] sd 0:0:0:0: [sda] Write Protect is off
[    1.921348] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.921377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.921382]  sda: sda1 sda2 < sda5 >
[    1.945445] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.945514] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.945602] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SV1604N  TR10 PQ: 0 ANSI: 5
[    1.945693] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    1.945712] sd 0:0:1:0: [sdb] Write Protect is off
[    1.945715] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.945745] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.945819] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    1.945837] sd 0:0:1:0: [sdb] Write Protect is off
[    1.945840] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.945869] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.945874]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 >
[    1.996243] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.996290] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.996816] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB00 PQ: 0 ANSI: 5
[    2.000751] sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.000755] Uniform CD-ROM driver Revision: 3.20
[    2.000868] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.000909] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    2.001099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.001136] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[    2.001173] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    2.001243] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    2.001321] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdcfeff00
[    2.012020] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    2.012116] usb usb1: configuration #1 chosen from 1 choice
[    2.012147] hub 1-0:1.0: USB hub found
[    2.012162] hub 1-0:1.0: 6 ports detected
[    2.012274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.012294] uhci_hcd: USB Universal Host Controller Interface driver
[    2.012361] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.012370] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.012422] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.012443] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[    2.012527] usb usb2: configuration #1 chosen from 1 choice
[    2.012552] hub 2-0:1.0: USB hub found
[    2.012564] hub 2-0:1.0: 2 ports detected
[    2.012650] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.012656] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.012700] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.012719] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[    2.012808] usb usb3: configuration #1 chosen from 1 choice
[    2.012832] hub 3-0:1.0: USB hub found
[    2.012852] hub 3-0:1.0: 2 ports detected
[    2.012929] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.012935] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.012978] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.012997] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[    2.013086] usb usb4: configuration #1 chosen from 1 choice
[    2.013110] hub 4-0:1.0: USB hub found
[    2.013121] hub 4-0:1.0: 2 ports detected
[    2.013243] usbcore: registered new interface driver libusual
[    2.013283] usbcore: registered new interface driver usbserial
[    2.013296] USB Serial support registered for generic
[    2.013315] usbcore: registered new interface driver usbserial_generic
[    2.013318] usbserial: USB Serial Driver core
[    2.013367] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.013761] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.013769] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013915] mice: PS/2 mouse device common for all mice
[    2.014068] rtc_cmos 00:06: RTC can wake from S4
[    2.014117] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.014164] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    2.014258] device-mapper: uevent: version 1.0.3
[    2.014413] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.014483] device-mapper: multipath: version 1.0.5 loaded
[    2.014486] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.014594] EISA: Probing bus 0 at eisa.0
[    2.014633] EISA: Detected 0 cards.
[    2.014670] cpuidle: using governor ladder
[    2.014673] cpuidle: using governor menu
[    2.015212] TCP cubic registered
[    2.015311] NET: Registered protocol family 10
[    2.015750] lo: Disabled Privacy Extensions
[    2.016104] NET: Registered protocol family 17
[    2.016127] Bluetooth: L2CAP ver 2.11
[    2.016129] Bluetooth: L2CAP socket layer initialized
[    2.016132] Bluetooth: SCO (Voice Link) ver 0.6
[    2.016134] Bluetooth: SCO socket layer initialized
[    2.016175] Bluetooth: RFCOMM socket layer initialized
[    2.016189] Bluetooth: RFCOMM TTY layer initialized
[    2.016191] Bluetooth: RFCOMM ver 1.10
[    2.016216] powernow-k8: Processor cpuid 681 not supported
[    2.016246] Using IPI No-Shortcut mode
[    2.016377] registered taskstats version 1
[    2.016516]   Magic number: 13:830:908
[    2.016585] mem port: hash matches
[    2.016649] rtc_cmos 00:06: setting system clock to 2009-06-14 23:52:02 UTC (1245023522)
[    2.016653] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.016655] EDD information not available.
[    2.017459] Freeing unused kernel memory: 532k freed
[    2.017587] Write protecting the kernel text: 4128k
[    2.017626] Write protecting the kernel read-only data: 1532k
[    2.051321] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.324035] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    2.460028] usb 1-2: configuration #1 chosen from 1 choice
[    2.560630] Floppy drive(s): fd0 is 1.44M
[    2.572074] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    2.579917] FDC 0 is a post-1991 82077
[    2.704560] usb 1-3: configuration #1 chosen from 1 choice
[    2.704760] hub 1-3:1.0: USB hub found
[    2.705199] hub 1-3:1.0: 4 ports detected
[    3.888371] PM: Starting manual resume from disk
[    3.888379] PM: Resume from partition 8:24
[    3.888380] PM: Checking hibernation image.
[    3.888650] PM: Resume from disk failed.
[    3.892050] EXT4-fs: INFO: recovery required on readonly filesystem.
[    3.892055] EXT4-fs: write access will be enabled during recovery.
[    3.908042] EXT4-fs: barriers enabled
[    6.647355] kjournald2 starting.  Commit interval 5 seconds
[    6.647390] EXT4-fs: delayed allocation enabled
[    6.647393] EXT4-fs: file extents enabled
[    6.647623] EXT4-fs: mballoc enabled
[    6.647627] EXT4-fs: sdb5: orphan cleanup on readonly fs
[    6.647637] ext4_orphan_cleanup: deleting unreferenced inode 346880
[    6.647818] ext4_orphan_cleanup: deleting unreferenced inode 347307
[    6.647831] ext4_orphan_cleanup: deleting unreferenced inode 153168
[    6.647839] EXT4-fs: sdb5: 3 orphan inodes deleted
[    6.647842] EXT4-fs: recovery complete.
[    7.013901] EXT4-fs: mounted filesystem with ordered data mode.
[   12.298546] udev: starting version 141
[   12.849271] Linux video capture interface: v2.00
[   12.907231] Linux agpgart interface v0.103
[   12.961934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.353942] parport_pc 00:04: reported by Plug and Play ACPI
[   13.354055] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   13.700305] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   13.783316] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[   13.791555] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[   13.818229] irda_init()
[   13.818252] NET: Registered protocol family 23
[   13.819776] ath_hal: module license 'Proprietary' taints kernel.
[   13.821499] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[   13.836108] wlan: 0.9.4
[   13.854910] ppdev: user-space parallel port driver
[   13.910421] ath_pci: 0.9.4
[   13.913873] ath_pci 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   14.226850] ath_rate_sample: 1.2 (0.9.4)
[   14.249599] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   14.249607] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   14.249616] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   14.249621] wifi0: mac 5.6 phy 4.1 radio 1.7
[   14.249626] wifi0: Use hw queue 1 for WME_AC_BE traffic
[   14.249629] wifi0: Use hw queue 0 for WME_AC_BK traffic
[   14.249631] wifi0: Use hw queue 2 for WME_AC_VI traffic
[   14.249633] wifi0: Use hw queue 3 for WME_AC_VO traffic
[   14.249635] wifi0: Use hw queue 8 for CAB traffic
[   14.249637] wifi0: Use hw queue 9 for beacons
[   14.253489] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   14.294403] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[   14.343007] wifi0: Atheros 5212: mem=0xdcff0000, irq=19
[   14.343894] cx88[0]: Your board isn't known (yet) to the driver.  You can
[   14.343896] cx88[0]: try to pick one of the existing card configs via
[   14.343897] cx88[0]: card=<n> insmod option.  Updating to the latest
[   14.343899] cx88[0]: version might help as well.
[   14.343903] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[   14.343906] cx88[0]:    card=0 -> UNKNOWN/GENERIC
[   14.343908] cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
[   14.343910] cx88[0]:    card=2 -> GDI Black Gold
[   14.343912] cx88[0]:    card=3 -> PixelView
[   14.343914] cx88[0]:    card=4 -> ATI TV Wonder Pro
[   14.343916] cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
[   14.343918] cx88[0]:    card=6 -> AverTV Studio 303 (M126)
[   14.343920] cx88[0]:    card=7 -> MSI TV-@nywhere Master
[   14.343922] cx88[0]:    card=8 -> Leadtek Winfast DV2000
[   14.343924] cx88[0]:    card=9 -> Leadtek PVR 2000
[   14.343926] cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
[   14.343928] cx88[0]:    card=11 -> Prolink PlayTV PVR
[   14.343930] cx88[0]:    card=12 -> ASUS PVR-416
[   14.343932] cx88[0]:    card=13 -> MSI TV-@nywhere
[   14.343934] cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
[   14.343936] cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
[   14.343939] cx88[0]:    card=16 -> KWorld LTV883RF
[   14.343941] cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
[   14.343943] cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
[   14.343945] cx88[0]:    card=19 -> Conexant DVB-T reference design
[   14.343947] cx88[0]:    card=20 -> Provideo PV259
[   14.343949] cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
[   14.343951] cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
[   14.343953] cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
[   14.343955] cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[   14.343958] cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[   14.343960] cx88[0]:    card=26 -> IODATA GV/BCTV7E
[   14.343962] cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[   14.343965] cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
[   14.343967] cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
[   14.343969] cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
[   14.343971] cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
[   14.343974] cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
[   14.343976] cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
[   14.343978] cx88[0]:    card=34 -> ATI HDTV Wonder
[   14.343980] cx88[0]:    card=35 -> WinFast DTV1000-T
[   14.343982] cx88[0]:    card=36 -> AVerTV 303 (M126)
[   14.343984] cx88[0]:    card=37 -> Hauppauge Nova-S-Plus DVB-S
[   14.343986] cx88[0]:    card=38 -> Hauppauge Nova-SE2 DVB-S
[   14.343988] cx88[0]:    card=39 -> KWorld DVB-S 100
[   14.343990] cx88[0]:    card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[   14.343992] cx88[0]:    card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[   14.343995] cx88[0]:    card=42 -> digitalnow DNTV Live! DVB-T Pro
[   14.343997] cx88[0]:    card=43 -> KWorld/VStream XPert DVB-T with cx22702
[   14.344029] cx88[0]:    card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[   14.344031] cx88[0]:    card=45 -> KWorld HardwareMpegTV XPert
[   14.344034] cx88[0]:    card=46 -> DViCO FusionHDTV DVB-T Hybrid
[   14.344036] cx88[0]:    card=47 -> pcHDTV HD5500 HDTV
[   14.344038] cx88[0]:    card=48 -> Kworld MCE 200 Deluxe
[   14.344040] cx88[0]:    card=49 -> PixelView PlayTV P7000
[   14.344042] cx88[0]:    card=50 -> NPG Tech Real TV FM Top 10
[   14.344044] cx88[0]:    card=51 -> WinFast DTV2000 H ver. I (old)
[   14.344047] cx88[0]:    card=52 -> Geniatech DVB-S
[   14.344049] cx88[0]:    card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[   14.344051] cx88[0]:    card=54 -> Norwood Micro TV Tuner
[   14.344053] cx88[0]:    card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[   14.344056] cx88[0]:    card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[   14.344058] cx88[0]:    card=57 -> ADS Tech Instant Video PCI
[   14.344061] cx88[0]:    card=58 -> Pinnacle PCTV HD 800i
[   14.344063] cx88[0]:    card=59 -> DViCO FusionHDTV 5 PCI nano
[   14.344065] cx88[0]:    card=60 -> Pinnacle Hybrid PCTV
[   14.344067] cx88[0]:    card=61 -> Winfast TV2000 XP Global
[   14.344069] cx88[0]:    card=62 -> PowerColor RA330
[   14.344071] cx88[0]:    card=63 -> Geniatech X8000-MT DVBT
[   14.344073] cx88[0]:    card=64 -> DViCO FusionHDTV DVB-T PRO
[   14.344075] cx88[0]:    card=65 -> DViCO FusionHDTV 7 Gold
[   14.344077] cx88[0]:    card=66 -> Prolink Pixelview MPEG 8000GT
[   14.344079] cx88[0]:    card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[   14.344082] cx88[0]:    card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
[   14.344084] cx88[0]:    card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
[   14.344086] cx88[0]:    card=70 -> TeVii S460 DVB-S/S2
[   14.344088] cx88[0]:    card=71 -> Omicom SS4 DVB-S/S2 PCI
[   14.344091] cx88[0]:    card=72 -> TBS 8920 DVB-S/S2
[   14.344093] cx88[0]:    card=73 -> TeVii S420 DVB-S
[   14.344095] cx88[0]:    card=74 -> Prolink Pixelview Global Extreme
[   14.344097] cx88[0]:    card=75 -> PROF 7300 DVB-S/S2
[   14.344099] cx88[0]:    card=76 -> WinFast DTV2000 H ver. J (new)
[   14.344102] cx88[0]: subsystem: 153b:1177, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[   14.344105] cx88[0]: TV tuner type -1, Radio tuner type -1
[   14.371173] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[   14.509309] cx2388x alsa driver version 0.0.6 loaded
[   14.558447] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[   14.601798] cx88[0]/2: cx2388x 8802 Driver Manager
[   14.601996] cx8800 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.602767] cx88[0]: Your board isn't known (yet) to the driver.  You can
[   14.602768] cx88[0]: try to pick one of the existing card configs via
[   14.602770] cx88[0]: card=<n> insmod option.  Updating to the latest
[   14.602771] cx88[0]: version might help as well.
[   14.602776] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[   14.602779] cx88[0]:    card=0 -> UNKNOWN/GENERIC
[   14.602781] cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
[   14.602783] cx88[0]:    card=2 -> GDI Black Gold
[   14.602785] cx88[0]:    card=3 -> PixelView
[   14.602786] cx88[0]:    card=4 -> ATI TV Wonder Pro
[   14.602788] cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
[   14.602791] cx88[0]:    card=6 -> AverTV Studio 303 (M126)
[   14.602793] cx88[0]:    card=7 -> MSI TV-@nywhere Master
[   14.602795] cx88[0]:    card=8 -> Leadtek Winfast DV2000
[   14.602797] cx88[0]:    card=9 -> Leadtek PVR 2000
[   14.602799] cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
[   14.602801] cx88[0]:    card=11 -> Prolink PlayTV PVR
[   14.602803] cx88[0]:    card=12 -> ASUS PVR-416
[   14.602805] cx88[0]:    card=13 -> MSI TV-@nywhere
[   14.602807] cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
[   14.602809] cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
[   14.602811] cx88[0]:    card=16 -> KWorld LTV883RF
[   14.602813] cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
[   14.602815] cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
[   14.602817] cx88[0]:    card=19 -> Conexant DVB-T reference design
[   14.602819] cx88[0]:    card=20 -> Provideo PV259
[   14.602821] cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
[   14.602823] cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
[   14.602826] cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
[   14.602828] cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[   14.602830] cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[   14.602833] cx88[0]:    card=26 -> IODATA GV/BCTV7E
[   14.602835] cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[   14.602837] cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
[   14.602839] cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
[   14.602841] cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
[   14.602843] cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
[   14.602845] cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
[   14.602848] cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
[   14.602850] cx88[0]:    card=34 -> ATI HDTV Wonder
[   14.602852] cx88[0]:    card=35 -> WinFast DTV1000-T
[   14.602854] cx88[0]:    card=36 -> AVerTV 303 (M126)
[   14.602856] cx88[0]:    card=37 -> Hauppauge Nova-S-Plus DVB-S
[   14.602858] cx88[0]:    card=38 -> Hauppauge Nova-SE2 DVB-S
[   14.602860] cx88[0]:    card=39 -> KWorld DVB-S 100
[   14.602862] cx88[0]:    card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[   14.602864] cx88[0]:    card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[   14.602867] cx88[0]:    card=42 -> digitalnow DNTV Live! DVB-T Pro
[   14.602869] cx88[0]:    card=43 -> KWorld/VStream XPert DVB-T with cx22702
[   14.602872] cx88[0]:    card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[   14.602874] cx88[0]:    card=45 -> KWorld HardwareMpegTV XPert
[   14.602876] cx88[0]:    card=46 -> DViCO FusionHDTV DVB-T Hybrid
[   14.602878] cx88[0]:    card=47 -> pcHDTV HD5500 HDTV
[   14.602880] cx88[0]:    card=48 -> Kworld MCE 200 Deluxe
[   14.602882] cx88[0]:    card=49 -> PixelView PlayTV P7000
[   14.602884] cx88[0]:    card=50 -> NPG Tech Real TV FM Top 10
[   14.602886] cx88[0]:    card=51 -> WinFast DTV2000 H ver. I (old)
[   14.602888] cx88[0]:    card=52 -> Geniatech DVB-S
[   14.602891] cx88[0]:    card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[   14.602893] cx88[0]:    card=54 -> Norwood Micro TV Tuner
[   14.602895] cx88[0]:    card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[   14.602898] cx88[0]:    card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[   14.602900] cx88[0]:    card=57 -> ADS Tech Instant Video PCI
[   14.602902] cx88[0]:    card=58 -> Pinnacle PCTV HD 800i
[   14.602904] cx88[0]:    card=59 -> DViCO FusionHDTV 5 PCI nano
[   14.602907] cx88[0]:    card=60 -> Pinnacle Hybrid PCTV
[   14.602909] cx88[0]:    card=61 -> Winfast TV2000 XP Global
[   14.602911] cx88[0]:    card=62 -> PowerColor RA330
[   14.602913] cx88[0]:    card=63 -> Geniatech X8000-MT DVBT
[   14.602915] cx88[0]:    card=64 -> DViCO FusionHDTV DVB-T PRO
[   14.602917] cx88[0]:    card=65 -> DViCO FusionHDTV 7 Gold
[   14.602919] cx88[0]:    card=66 -> Prolink Pixelview MPEG 8000GT
[   14.602921] cx88[0]:    card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[   14.602924] cx88[0]:    card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
[   14.602926] cx88[0]:    card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
[   14.602928] cx88[0]:    card=70 -> TeVii S460 DVB-S/S2
[   14.602930] cx88[0]:    card=71 -> Omicom SS4 DVB-S/S2 PCI
[   14.602932] cx88[0]:    card=72 -> TBS 8920 DVB-S/S2
[   14.602934] cx88[0]:    card=73 -> TeVii S420 DVB-S
[   14.602936] cx88[0]:    card=74 -> Prolink Pixelview Global Extreme
[   14.602939] cx88[0]:    card=75 -> PROF 7300 DVB-S/S2
[   14.602941] cx88[0]:    card=76 -> WinFast DTV2000 H ver. J (new)
[   14.602944] cx88[0]: subsystem: 153b:1177, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[   14.602946] cx88[0]: TV tuner type -1, Radio tuner type -1
[   14.716651] psmouse serio1: ID: 10 00 64<6>tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[   14.768705] cx88[0]/0: found at 0000:00:07.0, rev: 5, irq: 18, latency: 32, mmio: 0xdd000000
[   14.769897] cx88[0]/0: registered device video0 [v4l2]
[   14.770042] cx88[0]/0: registered device vbi0
[   14.770059] tuner' 0-0061: tuner type not set
[   14.770193] cx88_audio 0000:00:07.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.770225] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[   14.771456] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[   14.771460] ACPI: Device needs an ACPI driver
[   14.772224] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   14.772389] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   14.818657] logips2pp: Detected unknown logitech mouse model 57
[   15.295005] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[   16.756115] parport0: Printer, OKI DATA CORP B4100
[   18.488866] lp0: using parport0 (interrupt-driven).
[   18.654985] Adding 1052216k swap on /dev/sdb8.  Priority:-1 extents:1 across:1052216k
[   19.212076] EXT4 FS on sdb5, internal journal on sdb5:8
[   20.290182] type=1505 audit(1245016340.771:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2012
[   20.357408] type=1505 audit(1245016340.839:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2016
[   20.357734] type=1505 audit(1245016340.839:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2016
[   20.357824] type=1505 audit(1245016340.839:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2016
[   20.357907] type=1505 audit(1245016340.839:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2016
[   20.548990] type=1505 audit(1245016341.031:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2021
[   20.549401] type=1505 audit(1245016341.031:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2021
[   20.590664] type=1505 audit(1245016341.071:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2025
[   23.597606] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.597611] Bluetooth: BNEP filters: protocol multicast
[   23.622478] Bridge firewalling registered
[   24.849381] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.056806] [drm] Initialized drm 1.1.0 20060810
[   25.247918] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   25.587850] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   25.587875] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   25.587939] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   25.823510] [drm] Setting GART location based on new memory map
[   25.823521] [drm] Loading R300 Microcode
[   25.823555] [drm] Num pipes: 2
[   25.823563] [drm] writeback test succeeded in 1 usecs
[   39.772019] ath0: no IPv6 routers present
[   44.278443] cdrom: sr0: mrw address space DMA selected
[   44.382508] cdrom: sr0: mrw address space DMA selected
[   44.463908] UDF-fs: No VRS found

Über Anregungen wäre ich sehr Dankbar.

Beste Grüße

XGKubuntu

wienczny

Anmeldungsdatum:
26. November 2008

Beiträge: 11

Was genau läuft da denn schief? Was steht zu dem Zeitpunkt auf dem Bildschirm? Hast du die richtigen Kernel-Header installiert?

Alternativ kannst du auch den 2.6.30er Kernel nehmen. Da ist der Patch auch schon drin.

XGKubuntu

Anmeldungsdatum:
14. Juni 2009

Beiträge: 5

Hallo wienczny! Herzlichen Dank für die schnelle Antwort. Habe gestern Deinen Tipp befolgt und den neuen 2.6.30er Kernel heruntergeladen. Da ich noch nie einen Kernel selbst kompiliert habe, habe ich das howto von http://www.howtoforge.com/kernel_compilation_ubuntu verfolgt. Das kann ich jedem Newbie, wie mir selbst, auch empfehlen. Ich weiß jetzt auch was Du in einem vorherigen Eintrag mit "make menuconfig" gemeint hast.

Leider war dann irgendwann meine Partition von Linux voll und ich habe die ganze Nacht GParted-live laufen lassen müssen um wieder Platz zu schaffen. Ich mache mich heute wieder an das Kernel-Update und poste meine Erfahrungen mit dem 2.6.30er Kernel, wenn es funktioniert hat.

Eine kleine Frage habe ich noch. Ich habe meine alte config vom 2.6.28-11-generic-Kernel auf den 2.6.30er Kernel übertragen (cp /boot/config-uname -r ./.config). Muss ich noch weitere Änderungen beim Konfigurieren des 2.6.30er Kernels anwenden, um die Karte zu aktivieren, bevor ich den Kernel kompiliere. Woher weiß der Kernel eigentlich, welche Treiber er integrieren muss? Mit "make menuconfig" finde ich kein Menü-Punkt bei dem man seine Hardware konkret auswählen kann (z.B. ATI Radeon 9600, Soundblaster Pro 32, Terratec Cinergy HT PCI etc.). Wo finde ich das Modul für die "Terratec Cinergy HT PCI" oder haben die Linux-Kernels automatisch schon alle Treiber inbegriffen?

Cheers XGKubuntu

wienczny

Anmeldungsdatum:
26. November 2008

Beiträge: 11

Also der Treiber für die Karte heißt cx8800

Du findest ihn unter

Device Drivers → Multimedia Devices → Video Capture Adapters → Conexant 2388x (bt878 successor) support

Unter Linux gibt es selten Treiber für eine bestimmte Hardware. Häufig unterstützt ein Treiber eine ganze Reihe an Hardware. Der Name des Kernelmoduls ist häufig dem Chipsatz der Hardware ähnlich.

XGKubuntu

Anmeldungsdatum:
14. Juni 2009

Beiträge: 5

Also Kernel-Kompilieren hat mir nach dem fünfen fehlgeschlagenen Versuch (jedesmal 2 Stunden Rechenzeit) gereicht. Ich habe die Karte dann, wie von "wienczny" in einem anderen Forum beschrieben, mit folgenden Befehlen zum laufen bekommen (siehe unten). Hier mein dmesg-output (wichtig ist der vierte Eintrag von oben):

[   14.642805] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   14.720636] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[   14.720642] cx88/2: registering cx8802 driver, type: dvb access: shared
[   14.720647] cx88[0]/2: subsystem: 153b:1177, board: Terratec Cinergy HT PCI MKII [card=79]
[   14.720651] cx88[0]/2: cx2388x based DVB/ATSC card
[   14.720654] cx8802_alloc_frontends() allocating 1 frontend(s)
[   14.757620] xc2028 0-0061: attaching existing instance
[   14.757625] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   14.757629] cx88[0]/2: xc3028 attached
[   14.772064] DVB: registering new adapter (cx88[0])
[   14.772073] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[   15.160546] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[   15.160551] ACPI: Device needs an ACPI driver
[   15.414222] lp0: using parport0 (interrupt-driven).
[   15.642796] Adding 1052216k swap on /dev/sdb8.  Priority:-1 extents:1 across:1052216k
[   16.223070] EXT4 FS on sdb5, internal journal on sdb5:8
[   17.673214] type=1505 audit(1245264527.151:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2019
[   17.742674] type=1505 audit(1245264527.219:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2023
[   17.742994] type=1505 audit(1245264527.219:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2023
[   17.743092] type=1505 audit(1245264527.219:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2023
[   17.743173] type=1505 audit(1245264527.219:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2023
[   17.935720] type=1505 audit(1245264527.411:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2028
[   17.936156] type=1505 audit(1245264527.415:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2028
[   17.979924] type=1505 audit(1245264527.455:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2032
[   20.863859] cx88[0]: Calling XC2028/3028 callback
[   20.863867] cx88[0]: setting GPIO to TV!
[   21.607901] xc2028 0-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[   21.607908] cx88[0]: Calling XC2028/3028 callback
[   21.607910] cx88[0]: setting GPIO to TV!
[   23.750225] xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000.
[   23.780011] cx88[0]: Calling XC2028/3028 callback
[   24.034619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.034624] Bluetooth: BNEP filters: protocol multicast
[   24.059525] Bridge firewalling registered
[   25.200228] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.358869] [drm] Initialized drm 1.1.0 20060810
[   25.466786] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   25.806195] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   25.806219] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   25.806283] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   26.051774] [drm] Setting GART location based on new memory map
[   26.051784] [drm] Loading R300 Microcode
[   26.051818] [drm] Num pipes: 2
[   26.051825] [drm] writeback test succeeded in 1 usecs
[   39.948017] ath0: no IPv6 routers present
[  140.736572] xc2028 0-0061: Error on line 1130: -6
[  168.482391] cx88[0]: Calling XC2028/3028 callback
[  168.482398] cx88[0]: setting GPIO to radio!
[  169.721842] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[  169.721849] cx88[0]: Calling XC2028/3028 callback
[  169.721851] cx88[0]: setting GPIO to radio!
[  171.954271] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  171.968898] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[  172.016013] cx88[0]: Calling XC2028/3028 callback
[  173.160025] cx88[0]: Calling XC2028/3028 callback
[  174.012025] cx88[0]: Calling XC2028/3028 callback
[  175.156024] cx88[0]: Calling XC2028/3028 callback
[  176.004025] cx88[0]: Calling XC2028/3028 callback
[  177.148020] cx88[0]: Calling XC2028/3028 callback
[  177.996020] cx88[0]: Calling XC2028/3028 callback
[  179.140020] cx88[0]: Calling XC2028/3028 callback
[  179.988023] cx88[0]: Calling XC2028/3028 callback
[  181.132022] cx88[0]: Calling XC2028/3028 callback
[  181.980020] cx88[0]: Calling XC2028/3028 callback
[  183.124021] cx88[0]: Calling XC2028/3028 callback
[  183.972020] cx88[0]: Calling XC2028/3028 callback
[  185.116020] cx88[0]: Calling XC2028/3028 callback
[  185.964018] cx88[0]: Calling XC2028/3028 callback
[  187.108020] cx88[0]: Calling XC2028/3028 callback
[  187.940150] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[  187.955446] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[  188.004012] cx88[0]: Calling XC2028/3028 callback
[  189.148020] cx88[0]: Calling XC2028/3028 callback
[  189.996020] cx88[0]: Calling XC2028/3028 callback
[  191.140019] cx88[0]: Calling XC2028/3028 callback
[  191.988019] cx88[0]: Calling XC2028/3028 callback
[  193.132024] cx88[0]: Calling XC2028/3028 callback
[  193.980016] cx88[0]: Calling XC2028/3028 callback
[  195.124020] cx88[0]: Calling XC2028/3028 callback
[  195.972013] cx88[0]: Calling XC2028/3028 callback
[  197.116017] cx88[0]: Calling XC2028/3028 callback
[  197.964018] cx88[0]: Calling XC2028/3028 callback
[  199.108028] cx88[0]: Calling XC2028/3028 callback
[  199.956016] cx88[0]: Calling XC2028/3028 callback
[  201.100020] cx88[0]: Calling XC2028/3028 callback
[  201.948023] cx88[0]: Calling XC2028/3028 callback
[  203.092020] cx88[0]: Calling XC2028/3028 callback
[  203.940022] cx88[0]: Calling XC2028/3028 callback
[  205.084019] cx88[0]: Calling XC2028/3028 callback
[  205.932022] cx88[0]: Calling XC2028/3028 callback
[  207.076026] cx88[0]: Calling XC2028/3028 callback
[  207.924215] cx88[0]: Calling XC2028/3028 callback
[  209.068030] cx88[0]: Calling XC2028/3028 callback
[  209.916019] cx88[0]: Calling XC2028/3028 callback
[  211.060023] cx88[0]: Calling XC2028/3028 callback
[  211.908028] cx88[0]: Calling XC2028/3028 callback
[  213.052016] cx88[0]: Calling XC2028/3028 callback
[  213.904022] cx88[0]: Calling XC2028/3028 callback
[  215.048019] cx88[0]: Calling XC2028/3028 callback
[  215.896024] cx88[0]: Calling XC2028/3028 callback
[  217.040020] cx88[0]: Calling XC2028/3028 callback
[  217.888022] cx88[0]: Calling XC2028/3028 callback
[  219.032021] cx88[0]: Calling XC2028/3028 callback
[  219.880025] cx88[0]: Calling XC2028/3028 callback
[  221.024176] cx88[0]: Calling XC2028/3028 callback
[  221.872025] cx88[0]: Calling XC2028/3028 callback
[  223.016020] cx88[0]: Calling XC2028/3028 callback
[  223.864021] cx88[0]: Calling XC2028/3028 callback
[  225.008017] cx88[0]: Calling XC2028/3028 callback
[  225.856021] cx88[0]: Calling XC2028/3028 callback
[  227.000026] cx88[0]: Calling XC2028/3028 callback
[  227.852023] cx88[0]: Calling XC2028/3028 callback
[  228.996019] cx88[0]: Calling XC2028/3028 callback
[  229.844019] cx88[0]: Calling XC2028/3028 callback
[  230.988028] cx88[0]: Calling XC2028/3028 callback
[  231.836028] cx88[0]: Calling XC2028/3028 callback
[  232.981377] cx88[0]: Calling XC2028/3028 callback
[  233.828400] cx88[0]: Calling XC2028/3028 callback
[  234.972018] cx88[0]: Calling XC2028/3028 callback
[  235.840396] cx88[0]: Calling XC2028/3028 callback
[  236.984057] cx88[0]: Calling XC2028/3028 callback
[  237.860050] cx88[0]: Calling XC2028/3028 callback
[  239.016066] cx88[0]: Calling XC2028/3028 callback
[  239.864064] cx88[0]: Calling XC2028/3028 callback
[  241.008040] cx88[0]: Calling XC2028/3028 callback
[  241.860036] cx88[0]: Calling XC2028/3028 callback
[  243.008029] cx88[0]: Calling XC2028/3028 callback
[  243.856489] cx88[0]: Calling XC2028/3028 callback
[  245.000017] cx88[0]: Calling XC2028/3028 callback
[  245.848019] cx88[0]: Calling XC2028/3028 callback
[  246.992023] cx88[0]: Calling XC2028/3028 callback
[  247.840017] cx88[0]: Calling XC2028/3028 callback
[  248.984015] cx88[0]: Calling XC2028/3028 callback
[  249.832026] cx88[0]: Calling XC2028/3028 callback
[  250.976019] cx88[0]: Calling XC2028/3028 callback
[  251.824029] cx88[0]: Calling XC2028/3028 callback
[  252.968020] cx88[0]: Calling XC2028/3028 callback
[  253.816027] cx88[0]: Calling XC2028/3028 callback
[  254.960021] cx88[0]: Calling XC2028/3028 callback
[  255.812023] cx88[0]: Calling XC2028/3028 callback
[  256.956021] cx88[0]: Calling XC2028/3028 callback
[  257.804024] cx88[0]: Calling XC2028/3028 callback
[  258.948022] cx88[0]: Calling XC2028/3028 callback
[  259.798369] cx88[0]: Calling XC2028/3028 callback
[  260.940023] cx88[0]: Calling XC2028/3028 callback
[  261.788020] cx88[0]: Calling XC2028/3028 callback
[  262.932027] cx88[0]: Calling XC2028/3028 callback
[  263.788019] cx88[0]: Calling XC2028/3028 callback
[  264.932024] cx88[0]: Calling XC2028/3028 callback
[  265.784044] cx88[0]: Calling XC2028/3028 callback
[  266.932120] cx88[0]: Calling XC2028/3028 callback
[  267.780040] cx88[0]: Calling XC2028/3028 callback
[  268.928038] cx88[0]: Calling XC2028/3028 callback
[  269.776498] cx88[0]: Calling XC2028/3028 callback
[  270.920021] cx88[0]: Calling XC2028/3028 callback
[  271.768021] cx88[0]: Calling XC2028/3028 callback
[  272.912019] cx88[0]: Calling XC2028/3028 callback
[  273.764027] cx88[0]: Calling XC2028/3028 callback
[  274.908018] cx88[0]: Calling XC2028/3028 callback
[  275.760030] cx88[0]: Calling XC2028/3028 callback
[  276.904035] cx88[0]: Calling XC2028/3028 callback
[  277.760036] cx88[0]: Calling XC2028/3028 callback
[  278.908036] cx88[0]: Calling XC2028/3028 callback
[  279.756027] cx88[0]: Calling XC2028/3028 callback
[  280.900019] cx88[0]: Calling XC2028/3028 callback
[  281.752061] cx88[0]: Calling XC2028/3028 callback
[  282.896022] cx88[0]: Calling XC2028/3028 callback
[  283.748028] cx88[0]: Calling XC2028/3028 callback
[  284.892023] cx88[0]: Calling XC2028/3028 callback
[  309.676420] cx88[0]: Calling XC2028/3028 callback
[  309.676427] cx88[0]: setting GPIO to radio!
[  310.915868] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[  310.915875] cx88[0]: Calling XC2028/3028 callback
[  310.915877] cx88[0]: setting GPIO to radio!
[  313.150418] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[  313.165990] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[  313.212015] cx88[0]: Calling XC2028/3028 callback
[  314.356020] cx88[0]: Calling XC2028/3028 callback
[  315.208019] cx88[0]: Calling XC2028/3028 callback
[  316.352022] cx88[0]: Calling XC2028/3028 callback
[  317.200016] cx88[0]: Calling XC2028/3028 callback
[  318.344027] cx88[0]: Calling XC2028/3028 callback
[  319.192024] cx88[0]: Calling XC2028/3028 callback
[  320.336021] cx88[0]: Calling XC2028/3028 callback
[  321.184018] cx88[0]: Calling XC2028/3028 callback
[  322.328021] cx88[0]: Calling XC2028/3028 callback
[  323.180894] cx88[0]: Calling XC2028/3028 callback
[  324.324021] cx88[0]: Calling XC2028/3028 callback
[  325.172030] cx88[0]: Calling XC2028/3028 callback
[  326.316016] cx88[0]: Calling XC2028/3028 callback
[  327.164117] cx88[0]: Calling XC2028/3028 callback
[  328.308021] cx88[0]: Calling XC2028/3028 callback
[  329.156043] cx88[0]: Calling XC2028/3028 callback
[  330.303938] cx88[0]: Calling XC2028/3028 callback
[  331.153490] cx88[0]: Calling XC2028/3028 callback
[  332.296018] cx88[0]: Calling XC2028/3028 callback
[  333.144026] cx88[0]: Calling XC2028/3028 callback
[  334.296017] cx88[0]: Calling XC2028/3028 callback
[  335.144020] cx88[0]: Calling XC2028/3028 callback
[  336.288013] cx88[0]: Calling XC2028/3028 callback
[  337.136022] cx88[0]: Calling XC2028/3028 callback
[  338.280021] cx88[0]: Calling XC2028/3028 callback
[  339.128021] cx88[0]: Calling XC2028/3028 callback
[  340.272025] cx88[0]: Calling XC2028/3028 callback
[  341.120199] cx88[0]: Calling XC2028/3028 callback
[  342.264016] cx88[0]: Calling XC2028/3028 callback
[  343.112018] cx88[0]: Calling XC2028/3028 callback
[  344.256017] cx88[0]: Calling XC2028/3028 callback
[  345.112019] cx88[0]: Calling XC2028/3028 callback
[  346.256022] cx88[0]: Calling XC2028/3028 callback
[  347.104037] cx88[0]: Calling XC2028/3028 callback
[  348.248021] cx88[0]: Calling XC2028/3028 callback
[  349.096026] cx88[0]: Calling XC2028/3028 callback
[  350.240017] cx88[0]: Calling XC2028/3028 callback
[  351.088020] cx88[0]: Calling XC2028/3028 callback
[  352.234193] cx88[0]: Calling XC2028/3028 callback
[  353.084026] cx88[0]: Calling XC2028/3028 callback
[  354.228063] cx88[0]: Calling XC2028/3028 callback
[  355.076036] cx88[0]: Calling XC2028/3028 callback
[  356.220142] cx88[0]: Calling XC2028/3028 callback
[  357.068016] cx88[0]: Calling XC2028/3028 callback
[  358.212019] cx88[0]: Calling XC2028/3028 callback
[  359.060027] cx88[0]: Calling XC2028/3028 callback
[  360.204016] cx88[0]: Calling XC2028/3028 callback
[  361.052021] cx88[0]: Calling XC2028/3028 callback
[  362.196022] cx88[0]: Calling XC2028/3028 callback
[  363.044020] cx88[0]: Calling XC2028/3028 callback
[  364.188019] cx88[0]: Calling XC2028/3028 callback
[  365.040025] cx88[0]: Calling XC2028/3028 callback
[  366.184018] cx88[0]: Calling XC2028/3028 callback
[  367.032020] cx88[0]: Calling XC2028/3028 callback
[  368.176017] cx88[0]: Calling XC2028/3028 callback
[  369.024059] cx88[0]: Calling XC2028/3028 callback
[  370.168019] cx88[0]: Calling XC2028/3028 callback
[  371.016398] cx88[0]: Calling XC2028/3028 callback
[  372.160161] cx88[0]: Calling XC2028/3028 callback
[  373.008016] cx88[0]: Calling XC2028/3028 callback
[  374.152018] cx88[0]: Calling XC2028/3028 callback
[  375.000029] cx88[0]: Calling XC2028/3028 callback
[  376.144013] cx88[0]: Calling XC2028/3028 callback
[  376.996024] cx88[0]: Calling XC2028/3028 callback
[  378.144109] cx88[0]: Calling XC2028/3028 callback
[  378.992022] cx88[0]: Calling XC2028/3028 callback
[  380.136057] cx88[0]: Calling XC2028/3028 callback
[  380.984025] cx88[0]: Calling XC2028/3028 callback
[  382.128026] cx88[0]: Calling XC2028/3028 callback
[  382.984025] cx88[0]: Calling XC2028/3028 callback
[  384.128013] cx88[0]: Calling XC2028/3028 callback
[  384.980023] cx88[0]: Calling XC2028/3028 callback
[  386.124016] cx88[0]: Calling XC2028/3028 callback
[  386.976023] cx88[0]: Calling XC2028/3028 callback
[  388.120034] cx88[0]: Calling XC2028/3028 callback
[  388.968025] cx88[0]: Calling XC2028/3028 callback
[  390.112021] cx88[0]: Calling XC2028/3028 callback
[  390.968028] cx88[0]: Calling XC2028/3028 callback
[  392.112018] cx88[0]: Calling XC2028/3028 callback
[  392.964026] cx88[0]: Calling XC2028/3028 callback
[  394.108020] cx88[0]: Calling XC2028/3028 callback
[  394.964377] cx88[0]: Calling XC2028/3028 callback
[  396.108016] cx88[0]: Calling XC2028/3028 callback
[  396.956058] cx88[0]: Calling XC2028/3028 callback
[  398.100017] cx88[0]: Calling XC2028/3028 callback
[  398.948021] cx88[0]: Calling XC2028/3028 callback
[  400.092016] cx88[0]: Calling XC2028/3028 callback
[  400.940030] cx88[0]: Calling XC2028/3028 callback
[  402.084354] cx88[0]: Calling XC2028/3028 callback
[  402.932026] cx88[0]: Calling XC2028/3028 callback
[  404.076017] cx88[0]: Calling XC2028/3028 callback
[  404.928024] cx88[0]: Calling XC2028/3028 callback
[  406.072018] cx88[0]: Calling XC2028/3028 callback
[  406.924025] cx88[0]: Calling XC2028/3028 callback
[  408.068014] cx88[0]: Calling XC2028/3028 callback
[  408.916016] cx88[0]: Calling XC2028/3028 callback
[  410.060024] cx88[0]: Calling XC2028/3028 callback
[  410.920021] cx88[0]: Calling XC2028/3028 callback
[  412.064027] cx88[0]: Calling XC2028/3028 callback
[  412.912017] cx88[0]: Calling XC2028/3028 callback
[  414.056027] cx88[0]: Calling XC2028/3028 callback
[  414.908018] cx88[0]: Calling XC2028/3028 callback
[  416.052020] cx88[0]: Calling XC2028/3028 callback
[  416.904311] cx88[0]: Calling XC2028/3028 callback
[  418.048015] cx88[0]: Calling XC2028/3028 callback
[  418.896023] cx88[0]: Calling XC2028/3028 callback
[  420.040017] cx88[0]: Calling XC2028/3028 callback
[  420.888023] cx88[0]: Calling XC2028/3028 callback
[  422.032030] cx88[0]: Calling XC2028/3028 callback
[  422.880024] cx88[0]: Calling XC2028/3028 callback
[  424.024019] cx88[0]: Calling XC2028/3028 callback
[  424.872021] cx88[0]: Calling XC2028/3028 callback
[  426.016024] cx88[0]: Calling XC2028/3028 callback
[  426.864030] cx88[0]: Calling XC2028/3028 callback
[  428.008021] cx88[0]: Calling XC2028/3028 callback
[  428.856028] cx88[0]: Calling XC2028/3028 callback
[  430.000033] cx88[0]: Calling XC2028/3028 callback
[  430.848020] cx88[0]: Calling XC2028/3028 callback
[  431.992033] cx88[0]: Calling XC2028/3028 callback
[  432.841774] cx88[0]: Calling XC2028/3028 callback
[  433.984028] cx88[0]: Calling XC2028/3028 callback
[  434.832022] cx88[0]: Calling XC2028/3028 callback
[  435.976016] cx88[0]: Calling XC2028/3028 callback
[  436.824021] cx88[0]: Calling XC2028/3028 callback
[  437.968022] cx88[0]: Calling XC2028/3028 callback
[  438.816018] cx88[0]: Calling XC2028/3028 callback
[  439.960025] cx88[0]: Calling XC2028/3028 callback
[  440.808019] cx88[0]: Calling XC2028/3028 callback
[  441.952019] cx88[0]: Calling XC2028/3028 callback
[  442.800026] cx88[0]: Calling XC2028/3028 callback
[  443.944016] cx88[0]: Calling XC2028/3028 callback
[  444.792029] cx88[0]: Calling XC2028/3028 callback
[  445.936018] cx88[0]: Calling XC2028/3028 callback
[  446.784023] cx88[0]: Calling XC2028/3028 callback
[  447.928019] cx88[0]: Calling XC2028/3028 callback
[  448.776034] cx88[0]: Calling XC2028/3028 callback
[  449.920020] cx88[0]: Calling XC2028/3028 callback
[  450.768061] cx88[0]: Calling XC2028/3028 callback
[  451.912023] cx88[0]: Calling XC2028/3028 callback
[  452.760021] cx88[0]: Calling XC2028/3028 callback
[  453.904052] cx88[0]: Calling XC2028/3028 callback
[  454.752023] cx88[0]: Calling XC2028/3028 callback
[  455.896018] cx88[0]: Calling XC2028/3028 callback
[  456.752023] cx88[0]: Calling XC2028/3028 callback
[  457.896019] cx88[0]: Calling XC2028/3028 callback
[  458.744022] cx88[0]: Calling XC2028/3028 callback
[  459.888019] cx88[0]: Calling XC2028/3028 callback
[  460.736022] cx88[0]: Calling XC2028/3028 callback
[  461.880015] cx88[0]: Calling XC2028/3028 callback
[  462.728033] cx88[0]: Calling XC2028/3028 callback
[  463.872020] cx88[0]: Calling XC2028/3028 callback
[  464.720034] cx88[0]: Calling XC2028/3028 callback
[  465.864021] cx88[0]: Calling XC2028/3028 callback
[  466.712020] cx88[0]: Calling XC2028/3028 callback
[  467.856028] cx88[0]: Calling XC2028/3028 callback
[  468.704130] cx88[0]: Calling XC2028/3028 callback
[  469.848021] cx88[0]: Calling XC2028/3028 callback
[  470.696019] cx88[0]: Calling XC2028/3028 callback
[  471.840029] cx88[0]: Calling XC2028/3028 callback
[  472.688028] cx88[0]: Calling XC2028/3028 callback
[  473.832023] cx88[0]: Calling XC2028/3028 callback
[  474.681279] cx88[0]: Calling XC2028/3028 callback
[  475.832021] cx88[0]: Calling XC2028/3028 callback
[  476.680024] cx88[0]: Calling XC2028/3028 callback
[  477.824020] cx88[0]: Calling XC2028/3028 callback
[  478.672033] cx88[0]: Calling XC2028/3028 callback
[  479.816023] cx88[0]: Calling XC2028/3028 callback
[  480.664023] cx88[0]: Calling XC2028/3028 callback
[  481.808016] cx88[0]: Calling XC2028/3028 callback
[  482.656027] cx88[0]: Calling XC2028/3028 callback
[  483.800018] cx88[0]: Calling XC2028/3028 callback
[  484.648023] cx88[0]: Calling XC2028/3028 callback
[  485.792025] cx88[0]: Calling XC2028/3028 callback
[  486.640062] cx88[0]: Calling XC2028/3028 callback
[  487.784019] cx88[0]: Calling XC2028/3028 callback
[  488.632029] cx88[0]: Calling XC2028/3028 callback
[  489.776027] cx88[0]: Calling XC2028/3028 callback
[  490.624024] cx88[0]: Calling XC2028/3028 callback
[  491.768018] cx88[0]: Calling XC2028/3028 callback
[  492.616018] cx88[0]: Calling XC2028/3028 callback
[  493.760029] cx88[0]: Calling XC2028/3028 callback
[  494.608026] cx88[0]: Calling XC2028/3028 callback
[  495.752024] cx88[0]: Calling XC2028/3028 callback
[  496.600023] cx88[0]: Calling XC2028/3028 callback
[  497.744046] cx88[0]: Calling XC2028/3028 callback
[  498.592017] cx88[0]: Calling XC2028/3028 callback
[  499.736035] cx88[0]: Calling XC2028/3028 callback
[  500.584024] cx88[0]: Calling XC2028/3028 callback
[  501.728017] cx88[0]: Calling XC2028/3028 callback
[  502.576029] cx88[0]: Calling XC2028/3028 callback
[  503.720018] cx88[0]: Calling XC2028/3028 callback
[  504.568018] cx88[0]: Calling XC2028/3028 callback
[  505.712028] cx88[0]: Calling XC2028/3028 callback
[  506.560025] cx88[0]: Calling XC2028/3028 callback
[  507.704081] cx88[0]: Calling XC2028/3028 callback
[  508.552020] cx88[0]: Calling XC2028/3028 callback
[  509.696025] cx88[0]: Calling XC2028/3028 callback
[  510.544021] cx88[0]: Calling XC2028/3028 callback
[  511.688098] cx88[0]: Calling XC2028/3028 callback
[  512.536016] cx88[0]: Calling XC2028/3028 callback
[  513.680029] cx88[0]: Calling XC2028/3028 callback
[  514.528021] cx88[0]: Calling XC2028/3028 callback
[  515.672031] cx88[0]: Calling XC2028/3028 callback
[  516.520021] cx88[0]: Calling XC2028/3028 callback
[  517.664021] cx88[0]: Calling XC2028/3028 callback
[  518.512022] cx88[0]: Calling XC2028/3028 callback
[  519.656028] cx88[0]: Calling XC2028/3028 callback
[  520.505028] cx88[0]: Calling XC2028/3028 callback
[  521.648020] cx88[0]: Calling XC2028/3028 callback
[  522.504028] cx88[0]: Calling XC2028/3028 callback
[  523.648019] cx88[0]: Calling XC2028/3028 callback
[  524.496024] cx88[0]: Calling XC2028/3028 callback
[  525.643340] cx88[0]: Calling XC2028/3028 callback
[  526.488019] cx88[0]: Calling XC2028/3028 callback
[  527.632018] cx88[0]: Calling XC2028/3028 callback
[  528.480015] cx88[0]: Calling XC2028/3028 callback
[  529.624020] cx88[0]: Calling XC2028/3028 callback
[  530.472027] cx88[0]: Calling XC2028/3028 callback
[  531.616018] cx88[0]: Calling XC2028/3028 callback
[  532.464025] cx88[0]: Calling XC2028/3028 callback
[  533.608028] cx88[0]: Calling XC2028/3028 callback
[  534.456028] cx88[0]: Calling XC2028/3028 callback
[  535.600018] cx88[0]: Calling XC2028/3028 callback
[  536.448019] cx88[0]: Calling XC2028/3028 callback
[  537.592022] cx88[0]: Calling XC2028/3028 callback
[  538.440025] cx88[0]: Calling XC2028/3028 callback
[  539.584016] cx88[0]: Calling XC2028/3028 callback
[  540.432020] cx88[0]: Calling XC2028/3028 callback
[  541.576016] cx88[0]: Calling XC2028/3028 callback
[  542.424020] cx88[0]: Calling XC2028/3028 callback
[  543.568014] cx88[0]: Calling XC2028/3028 callback
[  544.416025] cx88[0]: Calling XC2028/3028 callback
[  545.560022] cx88[0]: Calling XC2028/3028 callback
[  546.408018] cx88[0]: Calling XC2028/3028 callback
[  547.552020] cx88[0]: Calling XC2028/3028 callback
[  548.400026] cx88[0]: Calling XC2028/3028 callback
[  549.544016] cx88[0]: Calling XC2028/3028 callback
[  550.392019] cx88[0]: Calling XC2028/3028 callback
[  551.536018] cx88[0]: Calling XC2028/3028 callback
[  552.384017] cx88[0]: Calling XC2028/3028 callback
[  553.528015] cx88[0]: Calling XC2028/3028 callback
[  554.376031] cx88[0]: Calling XC2028/3028 callback
[  555.520021] cx88[0]: Calling XC2028/3028 callback
[  556.368022] cx88[0]: Calling XC2028/3028 callback
[  557.512023] cx88[0]: Calling XC2028/3028 callback
[  558.364025] cx88[0]: Calling XC2028/3028 callback
[  559.508019] cx88[0]: Calling XC2028/3028 callback
[  560.356030] cx88[0]: Calling XC2028/3028 callback
[  561.500027] cx88[0]: Calling XC2028/3028 callback
[  562.348048] cx88[0]: Calling XC2028/3028 callback
[  563.492025] cx88[0]: Calling XC2028/3028 callback
[  564.340582] cx88[0]: Calling XC2028/3028 callback
[  565.484028] cx88[0]: Calling XC2028/3028 callback
[  566.332029] cx88[0]: Calling XC2028/3028 callback
[  567.476027] cx88[0]: Calling XC2028/3028 callback
[  568.324021] cx88[0]: Calling XC2028/3028 callback
[  569.468021] cx88[0]: Calling XC2028/3028 callback
[  570.316030] cx88[0]: Calling XC2028/3028 callback
[  571.460018] cx88[0]: Calling XC2028/3028 callback
[  572.308019] cx88[0]: Calling XC2028/3028 callback
[  573.452024] cx88[0]: Calling XC2028/3028 callback
[  574.300951] cx88[0]: Calling XC2028/3028 callback
[  575.444015] cx88[0]: Calling XC2028/3028 callback
[  576.292028] cx88[0]: Calling XC2028/3028 callback
[  577.436017] cx88[0]: Calling XC2028/3028 callback
[  578.284027] cx88[0]: Calling XC2028/3028 callback
[  579.428022] cx88[0]: Calling XC2028/3028 callback
[  580.276024] cx88[0]: Calling XC2028/3028 callback
[  581.420020] cx88[0]: Calling XC2028/3028 callback
[  582.268027] cx88[0]: Calling XC2028/3028 callback
[  583.412024] cx88[0]: Calling XC2028/3028 callback
[  584.260029] cx88[0]: Calling XC2028/3028 callback
[  585.404028] cx88[0]: Calling XC2028/3028 callback
[  586.252022] cx88[0]: Calling XC2028/3028 callback
[  587.396017] cx88[0]: Calling XC2028/3028 callback
[  588.244018] cx88[0]: Calling XC2028/3028 callback
[  589.388018] cx88[0]: Calling XC2028/3028 callback
[  590.236021] cx88[0]: Calling XC2028/3028 callback
[  591.380015] cx88[0]: Calling XC2028/3028 callback
[  592.228023] cx88[0]: Calling XC2028/3028 callback
[  593.372017] cx88[0]: Calling XC2028/3028 callback
[  594.220024] cx88[0]: Calling XC2028/3028 callback
[  595.364023] cx88[0]: Calling XC2028/3028 callback
[  596.212020] cx88[0]: Calling XC2028/3028 callback
[  597.356021] cx88[0]: Calling XC2028/3028 callback
[  598.204139] cx88[0]: Calling XC2028/3028 callback
[  599.348020] cx88[0]: Calling XC2028/3028 callback
[  600.196021] cx88[0]: Calling XC2028/3028 callback
[  601.340015] cx88[0]: Calling XC2028/3028 callback
[  602.188020] cx88[0]: Calling XC2028/3028 callback
[  603.332025] cx88[0]: Calling XC2028/3028 callback
[  604.180021] cx88[0]: Calling XC2028/3028 callback
[  605.324022] cx88[0]: Calling XC2028/3028 callback
[  606.172023] cx88[0]: Calling XC2028/3028 callback
[  607.316016] cx88[0]: Calling XC2028/3028 callback
[  608.164022] cx88[0]: Calling XC2028/3028 callback
[  609.308017] cx88[0]: Calling XC2028/3028 callback
[  610.156025] cx88[0]: Calling XC2028/3028 callback
[  611.300024] cx88[0]: Calling XC2028/3028 callback
[  612.148018] cx88[0]: Calling XC2028/3028 callback
[  613.292023] cx88[0]: Calling XC2028/3028 callback
[  614.140025] cx88[0]: Calling XC2028/3028 callback
[  615.284022] cx88[0]: Calling XC2028/3028 callback
[  616.132024] cx88[0]: Calling XC2028/3028 callback
[  617.276020] cx88[0]: Calling XC2028/3028 callback
[  618.124020] cx88[0]: Calling XC2028/3028 callback
[  619.276021] cx88[0]: Calling XC2028/3028 callback
[  620.124022] cx88[0]: Calling XC2028/3028 callback
[  621.268029] cx88[0]: Calling XC2028/3028 callback
[  622.116249] cx88[0]: Calling XC2028/3028 callback
[  623.260018] cx88[0]: Calling XC2028/3028 callback
[  624.108024] cx88[0]: Calling XC2028/3028 callback
[  625.252033] cx88[0]: Calling XC2028/3028 callback
[  626.100033] cx88[0]: Calling XC2028/3028 callback
[  627.244016] cx88[0]: Calling XC2028/3028 callback
[  628.092030] cx88[0]: Calling XC2028/3028 callback
[  629.236024] cx88[0]: Calling XC2028/3028 callback
[  630.084029] cx88[0]: Calling XC2028/3028 callback
[  631.228026] cx88[0]: Calling XC2028/3028 callback
[  632.076022] cx88[0]: Calling XC2028/3028 callback
[  633.220029] cx88[0]: Calling XC2028/3028 callback
[  634.068025] cx88[0]: Calling XC2028/3028 callback
[  635.212018] cx88[0]: Calling XC2028/3028 callback
[  636.060021] cx88[0]: Calling XC2028/3028 callback
[  637.204018] cx88[0]: Calling XC2028/3028 callback
[ 3680.152168] lp0: ECP mode

Terratec Cinery PCI HT unter 2.6.28-Kernel (Ubuntu 9.04):

1.) #sudo apt-get install mercurial meld

2.) #sudo apt-get install linux-package wget fakeroot build-essential perl

3.) #sudo apt-get install linux-headers-2.6.28-11-generic

4.) #hg clone http://linuxtv.org/hg/v4l-dvb

5.) #cd v4l-dvb

6.) #make menuconfig (hier den Terratec Cinergy HT PCI Treiber aktivieren unter Device-Drivers/Multimedia/Video Capture Adapters/Conexant 2388x (bt878successor))

7.) #make

8.) #sudo make install

9.) Firmware installieren (extract_xc3028.pl):

  1. ) #wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip

b.) #unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys

c.) #./extract_xc3028.pl

d.) #cp xc3028-v27.fw /lib/firmware

10.) #depmod -a 11.) #sudo reboot 12.) #dmesg 13.) Neue Module sollten nun bereits geladen sein (siehe output von dmesg), wenn nicht siehe:

http://www.comptechdoc.org/os/linux/manual3/modules.html

Hier wird erklärt, wie man /etc/modules.conf editieren muss.

14.) TV schauen

15.) Tipp: # sudo apt-get install kaffeine 16.) #kaffeine

Ich hoffe die Anleitung ist jetzt ausführlich genug, um ohne viel Linux-Kenntnisse durchzuführen. Jetzt hoffe ich nur, dass es bald eine Lösung für analoges TV unter Ubuntu gibt. TVtime läuft leider momentan nicht unter Ubuntu 9.04. Kennt jemand eine Lösung?

XGKu

XGKubuntu

Anmeldungsdatum:
14. Juni 2009

Beiträge: 5

Hallo Miteinander!

Ich wollte Euch nur kurz miteilen, dass ich nun auch den analogen Empfang (PAL) der Karte zum Laufen gebracht habe. Mit "Kaffeine" läuft nur DVB-T. Da gibts bei mir aber so wenig sender. Nach langem Hin und Her und der Installation duzender von TV-Software hat NUR "xawtv" funktioniert (kdetv geht z.B. nicht). Was Ihr noch zum vorherigen post hinzufügen müsst ist:

16.) #sudo apt-get install scantv

17.) #sudo apt-get install xawtv

18.) #cd /home/user

19.) #scantv -a -C /dev/vbi0 -o sender.out (in Deutschland Pal-BG und west-europe auswählen)

20.) #mv sender.out .xawtv

21.) #xawtv

22.) Pfeiltasten auf der Tastatur drücken, um Sender zu wechseln

Eine Bitte habe ich noch. Leider funktioniert der Ton noch nicht !!! Mit dem Befehl: # arecord -D hw:1,0 -r 48000 -c 2 -f S16_LE | sox -q -c 2 -r 48000 -t wav - -t alsa hw:0,0 bekomme ich nur rauschen. Dieses geht aber kurz weg, wenn ich zwischen den Sendern wechsle. Und der Ton lässt sich auch unter "xawtv" ganz oben mit der "mute Funktion" an und ausschalten. Folglich liegt es vermutlich nur an einer Kleinigkeit. (hw:0,1 und hw:0,2 habe ich schon getestet, geht auch nicht). Weiß jemand, wie man den Ton hin bekommt? (MP3 kann ich problemlos abspielen. Meine Soundkarte funktioniert also.)

Cheers XGKubuntu

xantus

Anmeldungsdatum:
25. Juli 2009

Beiträge: Zähle...

Hallo,

Hätte jemand die Güte, mir mitzuteilen, welche Kernelmodule für den Analogteil benötigt werden? Den bekomme ich partout nicht zum laufen, mir fehlt das /dev/video device, nach welchem wohl jede analoge TV Software sucht. Egal ob kdetv, xdtv ode xawtv. Klar ein ls zeigt, das es kein video device gibt. Auch kein /dev/vbi oder vergleichbar.

Danke für eure Hilfe

P.S.: Wenn ich mit mit dem perl Skript versuche, die Firmware auszupacken, kommt folgender Fehler:

# perl /usr/src/linux/Documentation/video4linux/extract_xc3028.pl Hash of extracted file does not match (found 38e209de62964fdfbd3665c89cc4f2ba, expected 0e44dbf63bb0169d57446aec21881ff2!

Allerdings habe ich die FW schon, mit früheren Kernel(firmware?)Versionen hatte ich das Phänomen nicht. Momentan 2.6.30.2. Bin nebenbei mit gentoo unterwegs, aber das sollte ja nicht stören.

eishailiga

Avatar von eishailiga

Anmeldungsdatum:
31. Oktober 2006

Beiträge: 5401

Wohnort: Sauerland

Falls es die cx88 Variante ist, versuche mal es mal mit diesen...

options cx88xx card=59 tuner=71 

in

/etc/modules.d/cx88 

anschließend sollte das Modul noch noch mit update-modules geparsed werden...glaube ich...

xantus

Anmeldungsdatum:
25. Juli 2009

Beiträge: 3

Danke, aber DVB-T scheint zu laufen, zumindest meckert kaffeine nicht über ein fehlendes Gerät und Sendersuchlauf klappt auch, finder nur nix, mangels Antenne. Daher habe ich aber nur ein schwarzes Bild.

Seit Kernel 2.6.30 hat die Karte auch einen eigenen Typ (79). Tuner 71 ist richtig:

#dmesg | grep card
cx88[0]: subsystem: 153b:1177, board: Terratec Cinergy HT PCI MKII [card=79,autodetected], frontend(s): 1
cx88[0]/2: subsystem: 153b:1177, board: Terratec Cinergy HT PCI MKII [card=79]
cx88[0]/2: cx2388x based DVB/ATSC card

DVB-T scheint also zu laufen. Analog leider, es wird kein video device angelegt. Leider habe ich dank Funkloch hier nur Kabel. Folgende Module habe ich geladen:

$ /sbin/lsmod | grep cx
cx88_alsa              12400  0
snd_pcm                75540  6 cx88_alsa,snd_usb_audio,snd_via82xx,snd_ac97_codec,snd_cmipci
cx88_dvb               23724  0
cx88_vp3054_i2c         3048  1 cx88_dvb
cx8802                 16972  1 cx88_dvb
videobuf_dvb            7500  1 cx88_dvb
cx88xx                 77128  3 cx88_alsa,cx88_dvb,cx8802
ir_common              44428  1 cx88xx
i2c_algo_bit            6348  2 cx88_vp3054_i2c,cx88xx
videobuf_dma_sg        12716  4 cx88_alsa,cx88_dvb,cx8802,cx88xx
videobuf_core          17772  4 cx8802,videobuf_dvb,cx88xx,videobuf_dma_sg
v4l2_common            15944  2 tuner,cx88xx
videodev               38432  3 tuner,cx88xx,v4l2_common
btcx_risc               4912  3 cx88_alsa,cx8802,cx88xx
tveeprom               14828  1 cx88xx
i2c_core               24296  10 drm,i2c_viapro,zl10353,cx88_vp3054_i2c,tuner,tuner_xc2028,cx88xx,i2c_algo_bit,v4l2_common,tveeprom
dvb_core               98060  2 cx88_dvb,videobuf_dvb


$ /sbin/lsmod | grep tuner
tuner                  25520  1
tuner_xc2028           23056  2
v4l2_common            15944  2 tuner,cx88xx
videodev               38432  3 tuner,cx88xx,v4l2_common
i2c_core               24296  10 drm,i2c_viapro,zl10353,cx88_vp3054_i2c,tuner,tuner_xc2028,cx88xx,i2c_algo_bit,v4l2_common,tveeprom

eishailiga

Avatar von eishailiga

Anmeldungsdatum:
31. Oktober 2006

Beiträge: 5401

Wohnort: Sauerland

Das mit der Karte stimmt...ist 79...im Anhang die oben genannte Firmware...was sagt denn dmesg ?

xc3028-v27.fw (64.7 KiB)
Download xc3028-v27.fw

xantus

Anmeldungsdatum:
25. Juli 2009

Beiträge: 3

Danke. Dir Firmware ist die Gleiche, die ich auch habe. Mit md5sum überprüft. Inzwischen bin aber einen Schritt weiter, ich habe ein video device. Juhee! Es fehlte das modul cx8800, das, warum auch immer, nicht automatisch geladen wurde, nur das cx8802.

Was allerdings, wenn geladen, dazu führt, das der Rechner gerne mal kurz hängen bleibt, sobald eine TV Anwendung gestartet wird. Egal, es geht, wie schon an anderer Stelle besprochen, eh nur xawtv, das aber dafür recht gut.

kdetv geht nicht, findet kein Gerät, xdtv auch nicht, meldet, warum auch immer:

No XvVideo port available.
ioctl VIDIOC_G_FBUF: Das Argument ist ungültig
...
*** AUDIO DEVICE TYPE = alsa
*** MIXER DEVICE TYPE = alsa
ioctl VIDIOC_STREAMON: Das Argument ist ungültig
ioctl VIDIOC_REQBUFS: Das Gerät oder die Ressource ist belegt

Zwar komisch, aber solange xawtv tut, ist alles bestens. Vielen Dank für eure Mühe.

raix

Anmeldungsdatum:
19. Oktober 2007

Beiträge: 91

Hi,

wie ist das mittlerweile? Funktioniert die Karte mit den aktuellen Kerneln und V4L-Versionen out of the Box oder muss der Patch noch eingespielt werden?

mfg