ubuntuusers.de

Tevii S480 kein Empfang

Status: Gelöst | Ubuntu-Version: Ubuntu 11.04 (Natty Narwhal)
Antworten |

kurtSchulz

Anmeldungsdatum:
18. Mai 2011

Beiträge: 5

Hallo,

ich habe eine Tevii s480 DVB S2 Karte (PCIe, 2 Tuner) verbaut. Leider kriege ich keinen Empfang mit der Karte hin. Ich habe recht neue s2-liplianin Treiber installiert.

 s2-liplianin-dkms (0~20110524.15387) aus http://ppa.launchpad.net/yavdr/main/ubuntu 

# firmware manuell kopiert da nicht vorhanden
wget http://www.tevii.com/s2_liplianin_1.tar
tar xvf s2_liplianin_1.tar
cp dvb-usb-s660.fw /lib/firmware/

Soweit ich das beurteilen kann, werden die Karte und die Tuner auch sauber erkannt

[   15.283394] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to load a firmware
[   15.386457] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   15.386461] dw2102: start downloading DW210X firmware
[   15.439163] usb 4-1: USB disconnect, address 2
[   15.544369] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[   15.544521] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   15.544537] DVB: registering new adapter (TeVii S480.2 USB)
[   15.544722] dvb-usb: MAC address: 88:88:88:88:88:88
[   15.655607] Invalid probe, probably not a DS3000
[   15.655692] dvb-usb: no frontend was attached by 'TeVii S480.2 USB'
[   15.655800] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.3/usb4/4-1/input/input5
[   15.655863] dvb-usb: schedule remote query interval to 150 msecs.
[   15.655867] dvb-usb: TeVii S480.2 USB successfully initialized and connected.
[   15.655886] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to load a firmware
[   15.657668] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   15.657671] dw2102: start downloading DW210X firmware
[   15.754359] dvb-usb: TeVii S480.2 USB successfully deinitialized and disconnected.
[   15.783418] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   15.791439] hda_codec: ALC892: BIOS auto-probing.
[   15.802766] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   15.813988] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[   15.814048] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   15.818141] DVB: registering new adapter (TeVii S480.1 USB)
[   15.913845] usb 3-1: USB disconnect, address 2
[   15.915896] dvb-usb: MAC address: 88:88:88:88:88:88
[   15.916317] Invalid probe, probably not a DS3000
[   15.916410] dvb-usb: no frontend was attached by 'TeVii S480.1 USB'
[   15.916487] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/usb3/3-1/input/input7
[   15.916540] dvb-usb: schedule remote query interval to 150 msecs.
[   15.916543] dvb-usb: TeVii S480.1 USB successfully initialized and connected.
[   15.916616] usbcore: registered new interface driver dw2102
[   16.073906] dvb-usb: TeVii S480.1 USB successfully deinitialized and disconnected.
[   17.232129] usb 4-1: new high speed USB device using ehci_hcd and address 3
[   17.383013] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[   17.385074] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[   17.387464] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   17.387468] dw2102: start downloading DW210X firmware
[   17.404455] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   17.551711] dvb-usb: found a 'TeVii S660 USB' in warm state.
[   17.551761] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   17.552172] DVB: registering new adapter (TeVii S660 USB)
[   17.781982] dvb-usb: MAC address: 00:18:bd:5c:60:c8
[   17.785100] DS3000 chip version: 0.192 attached.
[   17.785475] dw2102: Attached ds3000+ds2020!
[   17.785476] 
[   17.785479] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[   17.786273] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.3/usb4/4-1/input/input8
[   17.786317] dvb-usb: schedule remote query interval to 150 msecs.
[   17.786321] dvb-usb: TeVii S660 USB successfully initialized and connected.
[   18.061063] usb 3-1: new high speed USB device using ehci_hcd and address 3
[   18.212008] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[   18.213679] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[   18.215142] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   18.215145] dw2102: start downloading DW210X firmware
[   18.370670] dvb-usb: found a 'TeVii S660 USB' in warm state.
[   18.370727] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   18.371049] DVB: registering new adapter (TeVii S660 USB)
[   18.609467] dvb-usb: MAC address: 00:18:bd:5c:60:c8
[   18.612586] DS3000 chip version: 0.192 attached.
[   18.612959] dw2102: Attached ds3000+ds2020!
[   18.612960] 
[   18.612963] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[   18.613771] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.1/usb3/3-1/input/input9
[   18.613809] dvb-usb: schedule remote query interval to 150 msecs.
[   18.613811] dvb-usb: TeVii S660 USB successfully initialized and connected.

und lsusb -v liefert

 
Bus 003 Device 003: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x9022 TeVii Technology Ltd.
  idProduct          0xd660 DVB-S2 S660
...

Starte ich dann aber einen scan scan -v -a 0 Astra-19.2E bzw scan -v -a 1 Astra-19.2E

so kommt nichts heraus auf beiden Adaptern.

scanning Astra-19.2E
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

Woran könnte das liegen? Bin etwas ratlos. (Der Sat-Anschluss ist. Eine Satbox geht auf Anhieb)

Hat jemand eine Idee. Danke

kurtSchulz

(Themenstarter)

Anmeldungsdatum:
18. Mai 2011

Beiträge: 5

Update:

Die Karte läuft inzwischen. Warum weiss ich leider auch nicht so genau 😢 . Ich habe

- die Karte in einen anderen Slot gesteckt

- den gepatchten Treiber aus dem Forum hier compiliert dvb-s-usb-boxen-laufen-nicht

- die DS3000 FW ebenfalls in /lib/firmware kopiert

Irgendwann ging es halt.

BTW: es kann auch sein w_scan nicht so lief wie erwartet. Ich nur im Moment einen SAT Anschluss zur Verfügung und mir ist nicht klar, wie w_scan den Apapter auswählt. (-a /dev/dvb/adapter0 scheint mir nicht zuverlässig zu sein)

ciao

Antworten |