ubuntuusers.de

Hallo, ich habe nach Problemen mit einer TP-Link TL-WN310G die Karte durch eine TP-Link TL-WN811N ersetzt. Nun habe ich auch mit dieser Karte Probleme, allerdings anderer Art. Es geschieht immer wieder und in der Regel kurzzeitig, dass das System einfriert und nach etwas Zeit dann wieder benutzbar wird. Diese Probleme traten mit Ubuntu Lucid 10.04 LTS mit dem Lucid-Kernel auch mit den Backport-Modulen auf und auch mit den zurückportierten Kerneln von Maverick 10.10 und Natty 11.04 auf. Ich habe dann die Karte an einem Fujitsu-Siemens Amilo M 7400 mit Natty 11.04 getestet. An diesem Gerät treten derartige Freezes nicht auf. Daraufhin habe ich dann auf dem ASUS L3000E/T eine Neuinstallation mit Natty 11.04 vorgenommen. Leider friert hier das System wieder bzw. immernoch kurzzeitig ein. Wenn man übrigens die WLAN-Karte heraus nimmt, wenn das System einfroren ist, wird das System wieder benutzbar. Ich habe auch die Logfiles kern.log und syslog angesehen und dort tritt nach nem Freeze eine Zeile mit psmouse.c auf.

Handelt sich in diesem Fall um einen Hardwaredefekt oder um ein Kernelproblem bzgl. dieser bestimmten Hardwarekonfiguration?

daggi@L3000E-T:~$ lspci -nnk | grep -i ath -A2
02:00.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)
	Subsystem: Atheros Communications Inc. Device [168c:1079]
	Kernel driver in use: ath9k
	Kernel modules: ath9k

daggi@L3000E-T:~$ dmesg | egrep 'ath'
[    0.916551] device-mapper: multipath: version 1.2.0 loaded
[    0.916561] device-mapper: multipath round-robin: version 1.0.0 loaded
[   24.096553] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[   24.096574] ath9k 0000:02:00.0: PCI INT A -> Link[PILB] -> GSI 9 (level, low) -> IRQ 9
[   24.537560] ath: EEPROM regdomain: 0x809c
[   24.537568] ath: EEPROM indicates we should expect a country code
[   24.537572] ath: doing EEPROM country->regdmn map search
[   24.537576] ath: country maps to regdmn code: 0x52
[   24.537579] ath: Country alpha2 being used: CN
[   24.537582] ath: Regpair used: 0x52
[   26.005004] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   26.008117] Registered led device: ath9k-phy0::radio
[   26.008272] Registered led device: ath9k-phy0::assoc
[   26.008392] Registered led device: ath9k-phy0::tx
[   26.008543] Registered led device: ath9k-phy0::rx

daggi@L3000E-T:~$ uname -a
Linux L3000E-T 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux

daggi@L3000E-T:~$ modinfo ath9k
filename:       /lib/modules/2.6.38-11-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
license:        Dual BSD/GPL
description:    Support for Atheros 802.11n wireless LAN cards.
author:         Atheros Communications
srcversion:     A154806ADE78F5F924B0792
alias:          pci:v0000168Cd00000032sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000030sv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Esv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Dsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Csv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Bsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Asv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000029sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000027sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000024sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000023sv*sd*bc*sc*i*
depends:        ath9k_hw,mac80211,cfg80211,ath9k_common,ath
vermagic:       2.6.38-11-generic SMP mod_unload modversions 686 
parm:           debug:Debugging mask (uint)
parm:           nohwcrypt:Disable hardware encryption (int)
parm:           blink:Enable LED blink on activity (int)
parm:           btcoex_enable:Enable wifi-BT coexistence (int)

daggi@L3000E-T:~$ tail -f -n 0 /var/log/kern.log
Sep 17 13:08:00 L3000E-T kernel: [10377.564598] ath: Failed to stop TX DMA in 100 msec after killing last frame
Sep 17 13:08:00 L3000E-T kernel: [10377.564666] ath: Failed to stop TX DMA!
Sep 17 13:08:00 L3000E-T kernel: [10377.567263] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:08:00 L3000E-T kernel: [10377.567273] cfg80211: Restoring regulatory settings
Sep 17 13:08:00 L3000E-T kernel: [10377.567282] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:08:00 L3000E-T kernel: [10377.578517] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578525] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578529] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578534] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578538] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578543] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578547] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578552] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578556] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578561] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578565] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578571] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578574] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578579] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578583] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578589] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578593] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578597] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578602] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578606] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578611] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578616] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578620] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578625] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578628] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578634] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578638] cfg80211: Disabling freq 2484 MHz
Sep 17 13:08:00 L3000E-T kernel: [10377.578646] cfg80211: World regulatory domain updated:
Sep 17 13:08:00 L3000E-T kernel: [10377.578649] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:08:00 L3000E-T kernel: [10377.578654] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578659] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578663] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578668] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578673] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:01 L3000E-T kernel: [10378.663197] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:01 L3000E-T kernel: [10378.665838] wlan0: authenticated
Sep 17 13:08:01 L3000E-T kernel: [10378.665898] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:01 L3000E-T kernel: [10378.672144] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:08:01 L3000E-T kernel: [10378.672152] wlan0: associated
Sep 17 13:08:32 L3000E-T kernel: [10409.572305] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:08:32 L3000E-T kernel: [10409.572319] cfg80211: Restoring regulatory settings
Sep 17 13:08:32 L3000E-T kernel: [10409.572329] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:08:32 L3000E-T kernel: [10409.583979] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.583988] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.583992] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.583998] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584110] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584115] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584120] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584125] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584129] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584134] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584138] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584155] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584159] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584164] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584168] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584173] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584178] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584183] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584187] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584192] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584197] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584202] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584206] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584211] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584215] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584220] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584224] cfg80211: Disabling freq 2484 MHz
Sep 17 13:08:32 L3000E-T kernel: [10409.584232] cfg80211: World regulatory domain updated:
Sep 17 13:08:32 L3000E-T kernel: [10409.584235] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:08:32 L3000E-T kernel: [10409.584240] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584245] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584250] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584255] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584260] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:33 L3000E-T kernel: [10410.543188] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:33 L3000E-T kernel: [10410.545849] wlan0: authenticated
Sep 17 13:08:33 L3000E-T kernel: [10410.545907] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:33 L3000E-T kernel: [10410.552668] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:08:33 L3000E-T kernel: [10410.552676] wlan0: associated
Sep 17 13:09:04 L3000E-T kernel: [10441.564136] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:09:04 L3000E-T kernel: [10441.564148] cfg80211: Restoring regulatory settings
Sep 17 13:09:04 L3000E-T kernel: [10441.564156] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:09:04 L3000E-T kernel: [10441.575481] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575490] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575495] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575500] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575505] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575510] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575514] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575519] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575522] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575527] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575531] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575536] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575540] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575545] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575549] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575554] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575557] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575562] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575566] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575571] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575575] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575580] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575584] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575588] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575592] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575597] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575601] cfg80211: Disabling freq 2484 MHz
Sep 17 13:09:04 L3000E-T kernel: [10441.575608] cfg80211: World regulatory domain updated:
Sep 17 13:09:04 L3000E-T kernel: [10441.575611] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:09:04 L3000E-T kernel: [10441.575616] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575621] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575625] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575630] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575635] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:05 L3000E-T kernel: [10442.663226] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:09:05 L3000E-T kernel: [10442.665932] wlan0: authenticated
Sep 17 13:09:05 L3000E-T kernel: [10442.665990] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:09:05 L3000E-T kernel: [10442.679997] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:09:05 L3000E-T kernel: [10442.680052] wlan0: associated
Sep 17 13:14:46 L3000E-T kernel: [10783.583581] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:14:46 L3000E-T kernel: [10783.583593] cfg80211: Restoring regulatory settings
Sep 17 13:14:46 L3000E-T kernel: [10783.583602] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:14:46 L3000E-T kernel: [10783.596946] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596955] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596959] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596964] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596968] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596973] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596978] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596983] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596987] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596993] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596997] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597002] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597006] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597011] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597016] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597021] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597025] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597031] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597035] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597040] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597044] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597050] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597054] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597059] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597063] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597068] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597072] cfg80211: Disabling freq 2484 MHz
Sep 17 13:14:46 L3000E-T kernel: [10783.597079] cfg80211: World regulatory domain updated:
Sep 17 13:14:46 L3000E-T kernel: [10783.597082] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:14:46 L3000E-T kernel: [10783.597088] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597093] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597098] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597103] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597108] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:47 L3000E-T kernel: [10784.582435] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:14:47 L3000E-T kernel: [10784.584759] wlan0: authenticated
Sep 17 13:14:47 L3000E-T kernel: [10784.584812] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:14:47 L3000E-T kernel: [10784.589746] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:14:47 L3000E-T kernel: [10784.589754] wlan0: associated
Sep 17 13:20:06 L3000E-T kernel: [11103.580347] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:20:06 L3000E-T kernel: [11103.580363] cfg80211: Restoring regulatory settings
Sep 17 13:20:06 L3000E-T kernel: [11103.580373] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:20:06 L3000E-T kernel: [11103.614092] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614101] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614105] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614110] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614115] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614120] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614124] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614129] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614133] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614139] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614142] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614147] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614210] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614216] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614220] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614225] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614228] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614233] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614237] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614242] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614245] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614250] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614254] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614259] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614263] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614268] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614271] cfg80211: Disabling freq 2484 MHz
Sep 17 13:20:06 L3000E-T kernel: [11103.614279] cfg80211: World regulatory domain updated:
Sep 17 13:20:06 L3000E-T kernel: [11103.614283] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:20:06 L3000E-T kernel: [11103.614288] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614293] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614297] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614302] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614306] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:07 L3000E-T kernel: [11104.862637] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:20:07 L3000E-T kernel: [11104.873065] wlan0: authenticated
Sep 17 13:20:07 L3000E-T kernel: [11104.873133] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:20:07 L3000E-T kernel: [11104.878652] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:20:07 L3000E-T kernel: [11104.878660] wlan0: associated
Sep 17 13:21:20 L3000E-T kernel: [11171.824934] psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.

daggi@L3000E-T:~$ tail -f -n 0 /var/log/syslog
Sep 17 13:08:00 L3000E-T wpa_supplicant[779]: CTRL-EVENT-DISCONNECTED bssid=00:04:0e:d9:c5:4d reason=0
Sep 17 13:08:00 L3000E-T kernel: [10377.564598] ath: Failed to stop TX DMA in 100 msec after killing last frame
Sep 17 13:08:00 L3000E-T kernel: [10377.564666] ath: Failed to stop TX DMA!
Sep 17 13:08:00 L3000E-T kernel: [10377.567263] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:08:00 L3000E-T kernel: [10377.567273] cfg80211: Restoring regulatory settings
Sep 17 13:08:00 L3000E-T kernel: [10377.567282] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:08:00 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  completed -> disconnected
Sep 17 13:08:00 L3000E-T kernel: [10377.578517] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578525] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578529] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578534] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578538] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578543] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578547] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578552] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578556] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578561] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578565] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578571] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578574] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578579] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578583] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578589] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578593] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578597] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578602] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578606] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578611] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578616] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578620] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578625] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578628] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:00 L3000E-T kernel: [10377.578634] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578638] cfg80211: Disabling freq 2484 MHz
Sep 17 13:08:00 L3000E-T kernel: [10377.578646] cfg80211: World regulatory domain updated:
Sep 17 13:08:00 L3000E-T kernel: [10377.578649] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:08:00 L3000E-T kernel: [10377.578654] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578659] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578663] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578668] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T kernel: [10377.578673] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:00 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  disconnected -> scanning
Sep 17 13:08:01 L3000E-T wpa_supplicant[779]: Trying to associate with 00:04:0e:d9:c5:4d (SSID='ArpaNet' freq=2437 MHz)
Sep 17 13:08:01 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  scanning -> associating
Sep 17 13:08:01 L3000E-T kernel: [10378.663197] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:01 L3000E-T kernel: [10378.665838] wlan0: authenticated
Sep 17 13:08:01 L3000E-T kernel: [10378.665898] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:01 L3000E-T wpa_supplicant[779]: Associated with 00:04:0e:d9:c5:4d
Sep 17 13:08:01 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associating -> associated
Sep 17 13:08:01 L3000E-T kernel: [10378.672144] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:08:01 L3000E-T kernel: [10378.672152] wlan0: associated
Sep 17 13:08:01 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep 17 13:08:01 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep 17 13:08:01 L3000E-T wpa_supplicant[779]: WPA: Key negotiation completed with 00:04:0e:d9:c5:4d [PTK=CCMP GTK=CCMP]
Sep 17 13:08:01 L3000E-T wpa_supplicant[779]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:d9:c5:4d completed (reauth) [id=0 id_str=]
Sep 17 13:08:01 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  group handshake -> completed
Sep 17 13:08:32 L3000E-T wpa_supplicant[779]: CTRL-EVENT-DISCONNECTED bssid=00:04:0e:d9:c5:4d reason=0
Sep 17 13:08:32 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  completed -> disconnected
Sep 17 13:08:32 L3000E-T kernel: [10409.572305] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:08:32 L3000E-T kernel: [10409.572319] cfg80211: Restoring regulatory settings
Sep 17 13:08:32 L3000E-T kernel: [10409.572329] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:08:32 L3000E-T kernel: [10409.583979] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.583988] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.583992] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.583998] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584110] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584115] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584120] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584125] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584129] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584134] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584138] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584155] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584159] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584164] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584168] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584173] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584178] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584183] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584187] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584192] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584197] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584202] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584206] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584211] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584215] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:08:32 L3000E-T kernel: [10409.584220] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584224] cfg80211: Disabling freq 2484 MHz
Sep 17 13:08:32 L3000E-T kernel: [10409.584232] cfg80211: World regulatory domain updated:
Sep 17 13:08:32 L3000E-T kernel: [10409.584235] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:08:32 L3000E-T kernel: [10409.584240] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584245] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584250] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584255] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T kernel: [10409.584260] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:08:32 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  disconnected -> scanning
Sep 17 13:08:33 L3000E-T wpa_supplicant[779]: Trying to associate with 00:04:0e:d9:c5:4d (SSID='ArpaNet' freq=2437 MHz)
Sep 17 13:08:33 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  scanning -> associating
Sep 17 13:08:33 L3000E-T kernel: [10410.543188] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:33 L3000E-T kernel: [10410.545849] wlan0: authenticated
Sep 17 13:08:33 L3000E-T kernel: [10410.545907] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:08:33 L3000E-T wpa_supplicant[779]: Associated with 00:04:0e:d9:c5:4d
Sep 17 13:08:33 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associating -> associated
Sep 17 13:08:33 L3000E-T kernel: [10410.552668] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:08:33 L3000E-T kernel: [10410.552676] wlan0: associated
Sep 17 13:08:33 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep 17 13:08:33 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep 17 13:08:33 L3000E-T wpa_supplicant[779]: WPA: Key negotiation completed with 00:04:0e:d9:c5:4d [PTK=CCMP GTK=CCMP]
Sep 17 13:08:33 L3000E-T wpa_supplicant[779]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:d9:c5:4d completed (reauth) [id=0 id_str=]
Sep 17 13:08:33 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  group handshake -> completed
Sep 17 13:09:04 L3000E-T wpa_supplicant[779]: CTRL-EVENT-DISCONNECTED bssid=00:04:0e:d9:c5:4d reason=0
Sep 17 13:09:04 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  completed -> disconnected
Sep 17 13:09:04 L3000E-T kernel: [10441.564136] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:09:04 L3000E-T kernel: [10441.564148] cfg80211: Restoring regulatory settings
Sep 17 13:09:04 L3000E-T kernel: [10441.564156] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:09:04 L3000E-T kernel: [10441.575481] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575490] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575495] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575500] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575505] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575510] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575514] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575519] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575522] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575527] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575531] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575536] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575540] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575545] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575549] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575554] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575557] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575562] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575566] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575571] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575575] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575580] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575584] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575588] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575592] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:09:04 L3000E-T kernel: [10441.575597] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575601] cfg80211: Disabling freq 2484 MHz
Sep 17 13:09:04 L3000E-T kernel: [10441.575608] cfg80211: World regulatory domain updated:
Sep 17 13:09:04 L3000E-T kernel: [10441.575611] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:09:04 L3000E-T kernel: [10441.575616] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575621] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575625] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575630] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T kernel: [10441.575635] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:09:04 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  disconnected -> scanning
Sep 17 13:09:05 L3000E-T wpa_supplicant[779]: Trying to associate with 00:04:0e:d9:c5:4d (SSID='ArpaNet' freq=2437 MHz)
Sep 17 13:09:05 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  scanning -> associating
Sep 17 13:09:05 L3000E-T kernel: [10442.663226] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:09:05 L3000E-T kernel: [10442.665932] wlan0: authenticated
Sep 17 13:09:05 L3000E-T kernel: [10442.665990] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:09:05 L3000E-T kernel: [10442.679997] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:09:05 L3000E-T kernel: [10442.680052] wlan0: associated
Sep 17 13:09:05 L3000E-T wpa_supplicant[779]: Associated with 00:04:0e:d9:c5:4d
Sep 17 13:09:05 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associating -> associated
Sep 17 13:09:06 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep 17 13:09:06 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep 17 13:09:06 L3000E-T wpa_supplicant[779]: WPA: Key negotiation completed with 00:04:0e:d9:c5:4d [PTK=CCMP GTK=CCMP]
Sep 17 13:09:06 L3000E-T wpa_supplicant[779]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:d9:c5:4d completed (reauth) [id=0 id_str=]
Sep 17 13:09:06 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  group handshake -> completed
Sep 17 13:14:46 L3000E-T wpa_supplicant[779]: CTRL-EVENT-DISCONNECTED bssid=00:04:0e:d9:c5:4d reason=0
Sep 17 13:14:46 L3000E-T kernel: [10783.583581] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:14:46 L3000E-T kernel: [10783.583593] cfg80211: Restoring regulatory settings
Sep 17 13:14:46 L3000E-T kernel: [10783.583602] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:14:46 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  completed -> disconnected
Sep 17 13:14:46 L3000E-T kernel: [10783.596946] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596955] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596959] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596964] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596968] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596973] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596978] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596983] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596987] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.596993] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.596997] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597002] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597006] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597011] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597016] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597021] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597025] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597031] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597035] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597040] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597044] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597050] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597054] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597059] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597063] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:14:46 L3000E-T kernel: [10783.597068] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597072] cfg80211: Disabling freq 2484 MHz
Sep 17 13:14:46 L3000E-T kernel: [10783.597079] cfg80211: World regulatory domain updated:
Sep 17 13:14:46 L3000E-T kernel: [10783.597082] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:14:46 L3000E-T kernel: [10783.597088] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597093] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597098] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597103] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T kernel: [10783.597108] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:14:46 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  disconnected -> scanning
Sep 17 13:14:47 L3000E-T wpa_supplicant[779]: Trying to associate with 00:04:0e:d9:c5:4d (SSID='ArpaNet' freq=2437 MHz)
Sep 17 13:14:47 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  scanning -> associating
Sep 17 13:14:47 L3000E-T kernel: [10784.582435] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:14:47 L3000E-T kernel: [10784.584759] wlan0: authenticated
Sep 17 13:14:47 L3000E-T kernel: [10784.584812] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:14:47 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associating -> associated
Sep 17 13:14:47 L3000E-T kernel: [10784.589746] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:14:47 L3000E-T kernel: [10784.589754] wlan0: associated
Sep 17 13:14:47 L3000E-T wpa_supplicant[779]: Associated with 00:04:0e:d9:c5:4d
Sep 17 13:14:47 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep 17 13:14:47 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep 17 13:14:47 L3000E-T wpa_supplicant[779]: WPA: Key negotiation completed with 00:04:0e:d9:c5:4d [PTK=CCMP GTK=CCMP]
Sep 17 13:14:47 L3000E-T wpa_supplicant[779]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:d9:c5:4d completed (reauth) [id=0 id_str=]
Sep 17 13:14:47 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  group handshake -> completed
Sep 17 13:17:01 L3000E-T CRON[6382]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Sep 17 13:20:06 L3000E-T wpa_supplicant[779]: CTRL-EVENT-DISCONNECTED bssid=00:04:0e:d9:c5:4d reason=0
Sep 17 13:20:06 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  completed -> disconnected
Sep 17 13:20:06 L3000E-T kernel: [11103.580347] cfg80211: All devices are disconnected, going to restore regulatory settings
Sep 17 13:20:06 L3000E-T kernel: [11103.580363] cfg80211: Restoring regulatory settings
Sep 17 13:20:06 L3000E-T kernel: [11103.580373] cfg80211: Calling CRDA to update world regulatory domain
Sep 17 13:20:06 L3000E-T kernel: [11103.614092] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614101] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614105] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614110] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614115] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614120] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614124] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614129] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614133] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614139] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614142] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614147] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614210] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614216] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614220] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614225] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614228] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614233] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614237] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614242] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614245] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614250] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614254] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614259] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614263] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Sep 17 13:20:06 L3000E-T kernel: [11103.614268] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614271] cfg80211: Disabling freq 2484 MHz
Sep 17 13:20:06 L3000E-T kernel: [11103.614279] cfg80211: World regulatory domain updated:
Sep 17 13:20:06 L3000E-T kernel: [11103.614283] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 17 13:20:06 L3000E-T kernel: [11103.614288] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614293] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614297] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614302] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T kernel: [11103.614306] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 17 13:20:06 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  disconnected -> scanning
Sep 17 13:20:07 L3000E-T wpa_supplicant[779]: Trying to associate with 00:04:0e:d9:c5:4d (SSID='ArpaNet' freq=2437 MHz)
Sep 17 13:20:07 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  scanning -> associating
Sep 17 13:20:07 L3000E-T kernel: [11104.862637] wlan0: authenticate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:20:07 L3000E-T kernel: [11104.873065] wlan0: authenticated
Sep 17 13:20:07 L3000E-T kernel: [11104.873133] wlan0: associate with 00:04:0e:d9:c5:4d (try 1)
Sep 17 13:20:07 L3000E-T wpa_supplicant[779]: Associated with 00:04:0e:d9:c5:4d
Sep 17 13:20:07 L3000E-T kernel: [11104.878652] wlan0: RX AssocResp from 00:04:0e:d9:c5:4d (capab=0x411 status=0 aid=3)
Sep 17 13:20:07 L3000E-T kernel: [11104.878660] wlan0: associated
Sep 17 13:20:07 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associating -> associated
Sep 17 13:20:07 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep 17 13:20:07 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep 17 13:20:07 L3000E-T wpa_supplicant[779]: WPA: Key negotiation completed with 00:04:0e:d9:c5:4d [PTK=CCMP GTK=CCMP]
Sep 17 13:20:07 L3000E-T wpa_supplicant[779]: CTRL-EVENT-CONNECTED - Connection to 00:04:0e:d9:c5:4d completed (reauth) [id=0 id_str=]
Sep 17 13:20:07 L3000E-T NetworkManager[683]: <info> (wlan0): supplicant connection state:  group handshake -> completed
Sep 17 13:21:20 L3000E-T kernel: [11171.824934] psmouse.c: TouchPad at isa0060/serio4/input0 lpsmouse.cost synchronization, throwing 1 bytes away.
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: The canary thread is apparently starving. Taking action.
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: Demoting known real-time threads.
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: Successfully demoted thread 5608 of process 5604 (n/a).
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: Successfully demoted thread 5607 of process 5604 (n/a).
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: Successfully demoted thread 5604 of process 5604 (n/a).
Sep 17 13:21:20 L3000E-T rtkit-daemon[1073]: Demoted 3 threads.

Hallo,

versuche einen Modulparameter für den Treiber:

sudo modprobe -rf ath9k
sudo modprobe -v ath9k nohwcrypt=1
sudo service network-manager restart

Klappt das, dann permanent machen:

echo "options ath9k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath9k.conf

Unter 11.04 heisst das Paket der Backportmodule anders, siehe Wiki-Artikel. Am GraKa-Treiber kanns nicht liegen?!

praseodym schrieb:

Hallo,

versuche einen Modulparameter für den Treiber:

sudo modprobe -rf ath9k
sudo modprobe -v ath9k nohwcrypt=1
sudo service network-manager restart

Sofort nachdem ich das Modul mit dem Parameter neu geladen habe trat wieder so ein kurzeitiger Freeze ein.

praseodym schrieb:

Unter 11.04 heisst das Paket der Backportmodule anders, siehe Wiki-Artikel. Am GraKa-Treiber kanns nicht liegen?!

Habe jetzt den Treiber durch die Backport-Module aktualisiert.

daggi@L3000E-T:~$ modinfo ath9k
filename:       /lib/modules/2.6.38-11-generic/updates/cw-2.6.39/ath9k.ko
license:        Dual BSD/GPL
description:    Support for Atheros 802.11n wireless LAN cards.
author:         Atheros Communications
srcversion:     E294464C8E7A07D31B8967B
alias:          pci:v0000168Cd00000032sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000030sv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Esv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Dsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Csv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Bsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000002Asv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000029sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000027sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000024sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000023sv*sd*bc*sc*i*
depends:        ath9k_hw,mac80211,cfg80211,ath9k_common,ath
vermagic:       2.6.38-11-generic SMP mod_unload modversions 686 
parm:           debug:Debugging mask (uint)
parm:           nohwcrypt:Disable hardware encryption (int)
parm:           blink:Enable LED blink on activity (int)
parm:           btcoex_enable:Enable wifi-BT coexistence (int)

Bringt leider auch nichts. Wenn ich den Treiber entlade und dann neu lade friert das System wieder sofort kurzeitig ein.

Wieso sollte es am Graka-Treiber liegen? Wenn ich die WLAN-Karte entferne wird das System wieder benutzbar. Meinst du, dass der Graka-Treiber sich nicht mit dem WLAN-Treiber verträgt?

daggi@L3000E-T:~$ lspci -nnk | grep -i vga -A2
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter [1039:6325]
	Subsystem: ASUSTeK Computer Inc. Device [1043:1612]
	Kernel modules: sisfb

daggi@L3000E-T:~$ modinfo sisfb
filename:       /lib/modules/2.6.38-11-generic/kernel/drivers/video/sis/sisfb.ko
author:         Thomas Winischhofer <thomas@winischhofer.net>, Others
license:        GPL
description:    SiS 300/540/630/730/315/55x/65x/661/74x/330/76x/34x, XGI V3XT/V5/V8/Z7 framebuffer device driver
srcversion:     B47A8307D4F757625DD1874
alias:          pci:v000018CAd00000040sv*sd*bc*sc*i*
alias:          pci:v000018CAd00000020sv*sd*bc*sc*i*
alias:          pci:v00001039d00006330sv*sd*bc*sc*i*
alias:          pci:v00001039d00000330sv*sd*bc*sc*i*
alias:          pci:v00001039d00006325sv*sd*bc*sc*i*
alias:          pci:v00001039d00005315sv*sd*bc*sc*i*
alias:          pci:v00001039d00000325sv*sd*bc*sc*i*
alias:          pci:v00001039d00000315sv*sd*bc*sc*i*
alias:          pci:v00001039d00000310sv*sd*bc*sc*i*
alias:          pci:v00001039d00006300sv*sd*bc*sc*i*
alias:          pci:v00001039d00005300sv*sd*bc*sc*i*
alias:          pci:v00001039d00000300sv*sd*bc*sc*i*
depends:        
vermagic:       2.6.38-11-generic SMP mod_unload modversions 686 
parm:           userom:int
parm:           useoem:int
parm:           mem:
Determines the beginning of the video memory heap in KB. This heap is used
for video RAM management for eg. DRM/DRI. On 300 series, the default depends
on the amount of video RAM available. If 8MB of video RAM or less is available,
the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,
otherwise at 12288KB. On 315/330/340 series, the heap size is 32KB by default.
The value is to be specified without 'KB'.
 (int)
parm:           noaccel:
If set to anything other than 0, 2D acceleration will be disabled.
(default: 0)
 (int)
parm:           noypan:
If set to anything other than 0, y-panning will be disabled and scrolling
will be performed by redrawing the screen. (default: 0)
 (int)
parm:           nomax:
If y-panning is enabled, sisfb will by default use the entire available video
memory for the virtual screen in order to optimize scrolling performance. If
this is set to anything other than 0, sisfb will not do this and thereby 
enable the user to positively specify a virtual Y size of the screen using
fbset. (default: 0)
 (int)
parm:           mode:
Selects the desired default display mode in the format XxYxDepth,
eg. 1024x768x16. Other formats supported include XxY-Depth and
XxY-Depth@Rate. If the parameter is only one (decimal or hexadecimal)
number, it will be interpreted as a VESA mode number. (default: 800x600x8)
 (charp)
parm:           vesa:
Selects the desired default display mode by VESA defined mode number, eg.
0x117 (default: 0x0103)
 (int)
parm:           rate:
Selects the desired vertical refresh rate for CRT1 (external VGA) in Hz.
If the mode is specified in the format XxY-Depth@Rate, this parameter
will be ignored (default: 60)
 (int)
parm:           forcecrt1:
Normally, the driver autodetects whether or not CRT1 (external VGA) is 
connected. With this option, the detection can be overridden (1=CRT1 ON,
0=CRT1 OFF) (default: [autodetected])
 (int)
parm:           forcecrt2type:
If this option is omitted, the driver autodetects CRT2 output devices, such as
LCD, TV or secondary VGA. With this option, this autodetection can be
overridden. Possible parameters are LCD, TV, VGA or NONE. NONE disables CRT2.
On systems with a SiS video bridge, parameters SVIDEO, COMPOSITE or SCART can
be used instead of TV to override the TV detection. Furthermore, on systems
with a SiS video bridge, SVIDEO+COMPOSITE, HIVISION, YPBPR480I, YPBPR480P,
YPBPR720P and YPBPR1080I are understood. However, whether or not these work
depends on the very hardware in use. (default: [autodetected])
 (charp)
parm:           scalelcd:
Setting this to 1 will force the driver to scale the LCD image to the panel's
native resolution. Setting it to 0 will disable scaling; LVDS panels will
show black bars around the image, TMDS panels will probably do the scaling
themselves. Default: 1 on LVDS panels, 0 on TMDS panels
 (int)
parm:           pdc:
This is for manually selecting the LCD panel delay compensation. The driver
should detect this correctly in most cases; however, sometimes this is not
possible. If you see 'small waves' on the LCD, try setting this to 4, 32 or 24
on a 300 series chipset; 6 on other chipsets. If the problem persists, try
other values (on 300 series: between 4 and 60 in steps of 4; otherwise: any
value from 0 to 31). (default: autodetected, if LCD is active during start)
 (int)
parm:           pdc1:
This is same as pdc, but for LCD-via CRT1. Hence, this is for the 315/330/340
series only. (default: autodetected if LCD is in LCD-via-CRT1 mode during
startup) - Note: currently, this has no effect because LCD-via-CRT1 is not
implemented yet.
 (int)
parm:           specialtiming:
Please refer to documentation for more information on this option.
 (charp)
parm:           lvdshl:
Please refer to documentation for more information on this option.
 (int)
parm:           tvstandard:
This allows overriding the BIOS default for the TV standard. Valid choices are
pal, ntsc, palm and paln. (default: [auto; pal or ntsc only])
 (charp)
parm:           tvxposoffset:
Relocate TV output horizontally. Possible parameters: -32 through 32.
Default: 0
 (int)
parm:           tvyposoffset:
Relocate TV output vertically. Possible parameters: -32 through 32.
Default: 0
 (int)
parm:           nocrt2rate:
Setting this to 1 will force the driver to use the default refresh rate for
CRT2 if CRT2 type is VGA. (default: 0, use same rate as CRT1)
 (int)

Hallo,
prüfe mal die Interruptbelegung und das Kernel-Log. Das ist sehr wahrscheinlich kein Treiberproblem.

dmesg > BuZZ-dEE.txt
cat /proc/interrupts >> BuZZ-dEE.txt 

Hänge die erzeugte Datei einfach hier an oder verwende unseren Paste-Service.

dmesg

daggi@L3000E-T:~$ cat /proc/interrupts 
           CPU0       
  0:     685032    XT-PIC-XT-PIC    timer
  1:       4479    XT-PIC-XT-PIC    i8042
  2:          0    XT-PIC-XT-PIC    cascade
  3:          2    XT-PIC-XT-PIC  
  4:          2    XT-PIC-XT-PIC  
  5:        423    XT-PIC-XT-PIC    yenta, SiS SI7012
  6:          3    XT-PIC-XT-PIC    floppy
  7:          2    XT-PIC-XT-PIC    parport0
  8:          0    XT-PIC-XT-PIC    rtc0
  9:    6431031    XT-PIC-XT-PIC    acpi, firewire_ohci, yenta, ath9k
 10:          2    XT-PIC-XT-PIC  
 11:          0    XT-PIC-XT-PIC    ohci_hcd:usb1, ohci_hcd:usb2, eth0
 12:     527476    XT-PIC-XT-PIC    i8042
 14:      25605    XT-PIC-XT-PIC    pata_sis
 15:      12041    XT-PIC-XT-PIC    pata_sis
NMI:          0   Non-maskable interrupts
LOC:          0   Local timer interrupts
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
IWI:          0   IRQ work interrupts
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
MCE:          0   Machine check exceptions
MCP:         12   Machine check polls
ERR:          0
MIS:          0

Hallo,
zunächst würde ich den erweiterten Interrupt-Controller aktivieren, möglicherweise hilft das bereits ...

[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"

Siehe Booten und trage den Startbefehl lapic in das Grub 2 Startmenü ein.

In der /etc/default/grub sollte folgender Eintrag schon vorhanden sein. Um den genannten Befehl ergänzen.

GRUB_CMDLINE_LINUX_DEFAULT="ro quiet splash vt.handoff=7"
GRUB_CMDLINE_LINUX="lapic"

Aktualisieren ...

sudo update-grub  

und neu starten. Wie gehabt testen und erneut die IRQ-Belegung überprüfen.

Ansonsten könnte man noch den momentan verwendeten IRQ 9 und 5 über die /etc/pcmcia/config.opts sperren. IRQ 5,9 wird durch die Grafikkarte und yenta-Socket (PCMCIA) belegt. Zusätzlich könnte man die Parallel-Schnittstelle deaktivieren, diese wird vermutlich nicht benötigt. IRQ 10 ist frei.

exclude irq 9
exclude irq 5

Habe jetzt in der /etc/default/grub folgendes:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

auf:

GRUB_CMDLINE_LINUX_DEFAULT="ro quiet splash vt.handoff=7"
GRUB_CMDLINE_LINUX="lapic"

abgeändert. Das System ist danach aber immernoch eingefroren.

Daraufhin habe ich dann in der /etc/pcmcia/config.opts die entsprechenden IRQs gesperrt:

exclude irq 9
exclude irq 5
exclude irq 10

So wie es jetzt aussieht, sind die Freezes damit verschwunden. Mal sehen, ob das über einen längeren Zeitraum auch noch stimmt.

IRQ 10 wurde nicht durch ein anderes Gerät belegt, muss also auch nicht gesperrt werden.

Prüfe zur Sicherheit erneut den Zustand und auf Fehler mit den zuvor gezeigten Abfragen des Kenel-Logs und der IRQ-Tabelle.

Sofern vorhanden und nicht verwendet, könnte man die parallele und die seriellen Schnittstellen im BIOS abschalten, um weitere Ressourcen freizugeben.

Das System friert leider immernoch ein. Es kommt auch vor, dass der Bootvorgang einfriert und sobald man die WLAN-Karte aus dem Slot zieht geht das Booten weiter.

Durch was könnte das noch verursacht werden bzw. wie kann ich das Problem besser eingrenzen?

Warum hat sich bei IRQ 5 und IRQ 9 nichts geändert, obwohl diese excludiert sind?

dmesg

           CPU0       
  0:      19960    XT-PIC-XT-PIC    timer
  1:        109    XT-PIC-XT-PIC    i8042
  2:          0    XT-PIC-XT-PIC    cascade
  3:          2    XT-PIC-XT-PIC  
  4:          2    XT-PIC-XT-PIC  
  5:        274    XT-PIC-XT-PIC    yenta, SiS SI7012
  6:          3    XT-PIC-XT-PIC    floppy
  7:          3    XT-PIC-XT-PIC    parport0
  8:          0    XT-PIC-XT-PIC    rtc0
  9:     606353    XT-PIC-XT-PIC    acpi, firewire_ohci, yenta, ath9k
 10:          2    XT-PIC-XT-PIC  
 11:       2566    XT-PIC-XT-PIC    ohci_hcd:usb1, ohci_hcd:usb2, eth0
 12:       6545    XT-PIC-XT-PIC    i8042
 14:       6372    XT-PIC-XT-PIC    pata_sis
 15:       1048    XT-PIC-XT-PIC    pata_sis
NMI:          0   Non-maskable interrupts
LOC:      29331   Local timer interrupts
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
IWI:          0   IRQ work interrupts
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
TRM:       6234   Thermal event interrupts
THR:          0   Threshold APIC interrupts
MCE:          0   Machine check exceptions
MCP:          2   Machine check polls
ERR:          0
MIS:          0

Das System verwendet weiterhin ausschließlich PIC-Interrupts.

Versuche folgende Startparameter (ro und vt.handoff=7 ist doppelt und kann entfernt werden)

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="lapic pci=acpi acpi_irq_nobalance"

Grub aktualisieren.

Halte vorsichtshalber eine Ubuntu Start-CD oder USB-Stick bereit, sollte das System beim Startvorgang hängen bleiben.

Die Optionen in der /etc/pcmcia/config.opts sind anscheinend wirkungslos.

elektronenblitz63 schrieb:

Versuche folgende Startparameter (ro und vt.handoff=7 ist doppelt und kann entfernt werden)

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="lapic pci=acpi acpi_irq_nobalance"

Grub aktualisieren.

Das hilft leider auch nicht. ☹

Noch eine Variante

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="lapic apic pci=acpi acpi_irq_nobalance"

Ich vermute es liegt an einem fehlerhaften BIOS bzw. ACPI-System. Suche mal nach einem BIOS-Update für den Rechner.

Ausgabe meines Laptops mit abgeschaltetem erweiterten Interruptcontroller (APIC) ...

           CPU0       
  0:       5617    XT-PIC-XT        timer
  1:         13    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  3:          1    XT-PIC-XT      
  4:          1    XT-PIC-XT      
  5:          1    XT-PIC-XT      
  6:          1    XT-PIC-XT      
  7:          1    XT-PIC-XT      
  8:          1    XT-PIC-XT        rtc0
  9:         93    XT-PIC-XT        acpi
 10:        247    XT-PIC-XT        uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, firewire_ohci, yenta, p54pci
 11:       1064    XT-PIC-XT        ehci_hcd:usb1, uhci_hcd:usb2, i915, Intel ICH6, eth0
 12:       2101    XT-PIC-XT        i8042
 14:       5861    XT-PIC-XT        ata_piix
 15:          0    XT-PIC-XT        ata_piix

und mit aktiviertem:

            CPU0       
  0:       1469   IO-APIC-edge      timer
  1:         17   IO-APIC-edge      i8042
  8:          1   IO-APIC-edge      rtc0
  9:         94   IO-APIC-fasteoi   acpi
 12:       2809   IO-APIC-edge      i8042
 14:       5900   IO-APIC-edge      ata_piix
 15:          0   IO-APIC-edge      ata_piix
 16:       1459   IO-APIC-fasteoi   i915, eth0
 17:          0   IO-APIC-fasteoi   uhci_hcd:usb3
 18:        269   IO-APIC-fasteoi   uhci_hcd:usb4, yenta, p54pci
 19:          0   IO-APIC-fasteoi   uhci_hcd:usb5
 21:         55   IO-APIC-fasteoi   Intel ICH6
 22:          2   IO-APIC-fasteoi   firewire_ohci
 23:        681   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2

elektronenblitz63 schrieb:

Noch eine Variante

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="lapic apic pci=acpi acpi_irq_nobalance"

Das Problem besteht leider weiterhin.

elektronenblitz63 schrieb:

Ich vermute es liegt an einem fehlerhaften BIOS bzw. ACPI-System. Suche mal nach einem BIOS-Update für den Rechner.

ASUS bietet kein neueres Bios an, als das schon installierte.

Kann ich jetzt nichts mehr tun?

Gibt es noch einen zweiten PCMCIA-Slot, laut IRQ-Tabelle ja. Teste die Karte im zweiten Slot sofern vorhanden.

Man könnte noch gemäß acpi-fix nach Fehlern in der ACPI-Tabelle schauen.

sudo cat /proc/acpi/dsdt > BuZZ-dEE_dsdt.dat 

Die erzeugte Datei unverändert so hier anhängen!

Ansonsten fällt mir momentan nichts weiter dazu ein.