Hallo Ihr Forum-Nutzer da draußen,
ich habe vor kurzem auf meinem Windows-PC Ubuntu installiert. Doch nun habe ich das Problem, dass ich mit Ubuntu keine Verbindung mit dem Internet aufbauen kann. Ubuntu versucht sich immer wieder mit dem Netzwerk zu verbinden, scheitert daran allerdings. Bei Windows läuft noch alles prima. Ich hab schon seit fast einer Woche gegooglet und probiert; allerdings erfolglos. Nun hoffe ich hier auf Hilfe.
Ein wenig Erfahrung mit Linux habe ich, erwartet aber bitte nicht zu viel. Ich habe wie im Startthread beschrieben alle Befehle ausgeführt und das ist dabei herausgekommen:
Kernel:
uname -a: Linux R4BB1Tlinux 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
PCI
lspci -nnk | grep -i net -A2: 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000] Kernel driver in use: r8169
pccardctl info: <kein Output>
USB
lsusb: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 003: ID 046d:c22d Logitech, Inc. G510 Gaming Keyboard Bus 008 Device 002: ID 04b4:0060 Cypress Semiconductor Corp. Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Netzwerkkonfiguration
cat /etc/network/interfaces: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback
cat /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
cat /etc/hosts: 127.0.0.1 localhost 127.0.1.1 R4BB1Tlinux # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters
ifconfig -a: eth0 Link encap:Ethernet HWaddr 94:de:80:24:73:2c inet6 addr: fe80::96de:80ff:fe24:732c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2139 errors:0 dropped:50 overruns:0 frame:0 TX packets:9 errors:0 dropped:1363 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:221155 (221.1 KB) TX bytes:637 (637.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1036 errors:0 dropped:0 overruns:0 frame:0 TX packets:1036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:85433 (85.4 KB) TX bytes:85433 (85.4 KB)
iwconfig: eth0 no wireless extensions. lo no wireless extensions.
route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface
arp -av: Entries: 0 Skipped: 0 Found: 0
ip neigh show: <kein Output>
NetworkManager
cat /var/lib/NetworkManager/Networkmanager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true
cat /etc/NetworkManager/NetworkManager.conf: [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=94:DE:80:24:73:2C, [ifupdown] managed=false
Schnittstellenzuordnung
cat /etc/udev/rules.d/70-persistent-net.rules | egrep -i 'device|sub' -A3: # PCI device 0x10ec:0x8168 (r8169) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="94:de:80:24:73:2c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
Wir haben hier eine EasyBox 802 von Vodafone stehen und gehen über DSL ins Internet (Falls das noch von Wichtigkeit ist).
Vielen Dank im Voraus