lubux: Danke für die Antwort. Das Ergebnis:
~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-67-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 (Ubuntu 3.2.0-67.101-generic 3.2.60)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
[ 0.000000] BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Sony Corporation VGN-A115B(DE), BIOS R0040F1 04/21/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff40 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
[ 0.000000] RAMDISK: 3580c000 - 36bfe000
[ 0.000000] ACPI: RSDP 000f53f0 00014 (v00 SONY )
[ 0.000000] ACPI: RSDT 7ff40000 0002C (v01 SONY F1 20040421 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff40200 00084 (v02 SONY F1 20040421 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff40500 03B4E (v01 SONY F1 20040421 MSFT 0100000D)
[ 0.000000] ACPI: FACS 7ff50000 00040
[ 0.000000] ACPI: OEMB 7ff50040 00053 (v01 SONY F1 20040421 MSFT 00000097)
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff40
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff40
[ 0.000000] On node 0 totalpages: 523983
[ 0.000000] free_area_init_node: node 0, pgdat c182ff00, node_mem_map f480c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2319 pages used for memmap
[ 0.000000] HighMem zone: 294451 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77e4000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519888
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-67-generic root=UUID=de12a17d-aa42-484a-94be-cfdd0bf661f5 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8385280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff40)
[ 0.000000] Memory: 2039960k/2096384k available (5648k kernel code, 55972k reserved, 2785k data, 716k init, 1187080k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc183d000 - 0xc18f0000 ( 716 kB)
[ 0.000000] .data : 0xc1584144 - 0xc183c640 (2785 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1584144 (5648 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1495.111 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.22 BogoMIPS (lpj=5980444)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004095] AppArmor: AppArmor initialized
[ 0.004098] Yama: becoming mindful.
[ 0.004200] Mount-cache hash table entries: 512
[ 0.004428] Initializing cgroup subsys cpuacct
[ 0.004439] Initializing cgroup subsys memory
[ 0.004453] Initializing cgroup subsys devices
[ 0.004457] Initializing cgroup subsys freezer
[ 0.004461] Initializing cgroup subsys blkio
[ 0.004474] Initializing cgroup subsys perf_event
[ 0.004520] mce: CPU supports 5 MCE banks
[ 0.004533] CPU0: Thermal monitoring enabled (TM2)
[ 0.004845] SMP alternatives: switching to UP code
[ 0.015561] Freeing SMP alternatives: 24k freed
[ 0.015575] ACPI: Core revision 20110623
[ 0.019275] ACPI: setting ELCR to 0200 (from 02b8)
[ 0.020018] ftrace: allocating 25536 entries in 50 pages
[ 0.024121] weird, boot CPU (#0) not listed by the BIOS.
[ 0.024127] SMP motherboard not detected.
[ 0.024131] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.028001] SMP disabled
[ 0.028001] Performance Events: p6 PMU driver.
[ 0.028001] ... version: 0
[ 0.028001] ... bit width: 32
[ 0.028001] ... generic registers: 2
[ 0.028001] ... value mask: 00000000ffffffff
[ 0.028001] ... max period: 000000007fffffff
[ 0.028001] ... fixed-purpose events: 0
[ 0.028001] ... event mask: 0000000000000003
[ 0.028001] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.028001] Brought up 1 CPUs
[ 0.028001] Total of 1 processors activated (2990.22 BogoMIPS).
[ 0.028001] devtmpfs: initialized
[ 0.028001] EVM: security.selinux
[ 0.028001] EVM: security.SMACK64
[ 0.028001] EVM: security.capability
[ 0.028001] PM: Registering ACPI NVS region at 7ff50000 (720896 bytes)
[ 0.028001] print_constraints: dummy:
[ 0.028001] RTC time: 10:16:19, date: 08/10/14
[ 0.028001] NET: Registered protocol family 16
[ 0.028001] EISA bus registered
[ 0.028001] ACPI: bus type pci registered
[ 0.029178] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.029182] PCI: Using configuration type 1 for base access
[ 0.031235] bio: create slab <bio-0> at 0
[ 0.031378] ACPI: Added _OSI(Module Device)
[ 0.031381] ACPI: Added _OSI(Processor Device)
[ 0.031390] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.031394] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032678] ACPI: EC: Look up EC in DSDT
[ 0.036922] ACPI: Interpreter enabled
[ 0.036939] ACPI: (supports S0 S3 S4 S5)
[ 0.036971] ACPI: Using PIC for interrupt routing
[ 0.042800] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.042982] ACPI: No dock devices found.
[ 0.042985] HEST: Table not found.
[ 0.042992] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.043095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.043323] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.043328] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.043332] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.043337] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.043341] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.043360] pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
[ 0.043371] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.043423] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
[ 0.043487] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.043534] pci 0000:00:1d.0: reg 20: [io 0xe800-0xe81f]
[ 0.043573] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.043620] pci 0000:00:1d.1: reg 20: [io 0xe880-0xe89f]
[ 0.043658] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.044040] pci 0000:00:1d.2: reg 20: [io 0xec00-0xec1f]
[ 0.044091] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.044115] pci 0000:00:1d.7: reg 10: [mem 0xff7ffc00-0xff7fffff]
[ 0.044214] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.044221] pci 0000:00:1d.7: PME# disabled
[ 0.044243] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.044291] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[ 0.044376] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[ 0.044392] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.044404] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.044416] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.044427] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.044439] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.044451] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.044484] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.044531] pci 0000:00:1f.3: reg 20: [io 0x0540-0x055f]
[ 0.044573] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.044590] pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff]
[ 0.044601] pci 0000:00:1f.5: reg 14: [io 0xe000-0xe03f]
[ 0.044612] pci 0000:00:1f.5: reg 18: [mem 0xff7ff800-0xff7ff9ff]
[ 0.044623] pci 0000:00:1f.5: reg 1c: [mem 0xff7ff400-0xff7ff4ff]
[ 0.044672] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.044678] pci 0000:00:1f.5: PME# disabled
[ 0.044696] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[ 0.044714] pci 0000:00:1f.6: reg 10: [io 0xe400-0xe4ff]
[ 0.044725] pci 0000:00:1f.6: reg 14: [io 0xe080-0xe0ff]
[ 0.044788] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.044794] pci 0000:00:1f.6: PME# disabled
[ 0.044822] pci 0000:01:00.0: [1002:5c61] type 0 class 0x000300
[ 0.044838] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.044848] pci 0000:01:00.0: reg 14: [io 0xc800-0xc8ff]
[ 0.044858] pci 0000:01:00.0: reg 18: [mem 0xff5f0000-0xff5fffff]
[ 0.044884] pci 0000:01:00.0: reg 30: [mem 0xff5c0000-0xff5dffff pref]
[ 0.044916] pci 0000:01:00.0: supports D1 D2
[ 0.044953] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.044958] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.044964] pci 0000:00:01.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.044969] pci 0000:00:01.0: bridge window [mem 0xce900000-0xde9fffff pref]
[ 0.044998] pci 0000:02:01.0: [104c:ac8e] type 2 class 0x000607
[ 0.045017] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.045047] pci 0000:02:01.0: supports D1 D2
[ 0.045050] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.045056] pci 0000:02:01.0: PME# disabled
[ 0.045078] pci 0000:02:01.2: [104c:802e] type 0 class 0x000c00
[ 0.045097] pci 0000:02:01.2: reg 10: [mem 0xff6fe800-0xff6fefff]
[ 0.045108] pci 0000:02:01.2: reg 14: [mem 0xff6f8000-0xff6fbfff]
[ 0.045176] pci 0000:02:01.2: supports D1 D2
[ 0.045179] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.045185] pci 0000:02:01.2: PME# disabled
[ 0.045204] pci 0000:02:01.3: [104c:ac8f] type 0 class 0x000180
[ 0.045222] pci 0000:02:01.3: reg 10: [mem 0xff6ff000-0xff6fffff]
[ 0.045295] pci 0000:02:01.3: supports D1 D2
[ 0.045299] pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot
[ 0.045304] pci 0000:02:01.3: PME# disabled
[ 0.045328] pci 0000:02:02.0: [8086:4220] type 0 class 0x000280
[ 0.045347] pci 0000:02:02.0: reg 10: [mem 0xff6fd000-0xff6fdfff]
[ 0.045422] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.045427] pci 0000:02:02.0: PME# disabled
[ 0.045447] pci 0000:02:04.0: [1033:0035] type 0 class 0x000c03
[ 0.045465] pci 0000:02:04.0: reg 10: [mem 0xff6f7000-0xff6f7fff]
[ 0.045536] pci 0000:02:04.0: supports D1 D2
[ 0.045539] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.045545] pci 0000:02:04.0: PME# disabled
[ 0.045563] pci 0000:02:04.1: [1033:0035] type 0 class 0x000c03
[ 0.045581] pci 0000:02:04.1: reg 10: [mem 0xff6fc000-0xff6fcfff]
[ 0.045652] pci 0000:02:04.1: supports D1 D2
[ 0.045655] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.045661] pci 0000:02:04.1: PME# disabled
[ 0.045679] pci 0000:02:04.2: [1033:00e0] type 0 class 0x000c03
[ 0.045697] pci 0000:02:04.2: reg 10: [mem 0xff6fe400-0xff6fe4ff]
[ 0.045767] pci 0000:02:04.2: supports D1 D2
[ 0.045771] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.045776] pci 0000:02:04.2: PME# disabled
[ 0.045804] pci 0000:02:08.0: [8086:103d] type 0 class 0x000200
[ 0.045822] pci 0000:02:08.0: reg 10: [mem 0xff6f6000-0xff6f6fff]
[ 0.045833] pci 0000:02:08.0: reg 14: [io 0xdc00-0xdc3f]
[ 0.045895] pci 0000:02:08.0: supports D1 D2
[ 0.045899] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.045904] pci 0000:02:08.0: PME# disabled
[ 0.045940] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.045946] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.045952] pci 0000:00:1e.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.045959] pci 0000:00:1e.0: bridge window [mem 0xdea00000-0xdeafffff pref]
[ 0.045963] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.045968] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.045974] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.046012] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[ 0.046027] pci_bus 0000:00: on NUMA node 0
[ 0.046032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.046144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.046186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.046408] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.050354] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9)
[ 0.050441] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9)
[ 0.050525] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9)
[ 0.050607] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9)
[ 0.050690] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9)
[ 0.050783] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9) *0, disabled.
[ 0.050868] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9)
[ 0.050950] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9)
[ 0.051133] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.051141] vgaarb: loaded
[ 0.051144] vgaarb: bridge control possible 0000:01:00.0
[ 0.051349] i2c-core: driver [aat2870] using legacy suspend method
[ 0.051352] i2c-core: driver [aat2870] using legacy resume method
[ 0.051508] SCSI subsystem initialized
[ 0.051592] libata version 3.00 loaded.
[ 0.051670] usbcore: registered new interface driver usbfs
[ 0.051689] usbcore: registered new interface driver hub
[ 0.051730] usbcore: registered new device driver usb
[ 0.051878] PCI: Using ACPI for IRQ routing
[ 0.051884] PCI: pci_cache_line_size set to 64 bytes
[ 0.051970] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.051975] reserve RAM buffer: 000000007ff40000 - 000000007fffffff
[ 0.052167] NetLabel: Initializing
[ 0.052171] NetLabel: domain hash size = 128
[ 0.052173] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.052192] NetLabel: unlabeled traffic allowed by default
[ 0.065551] AppArmor: AppArmor Filesystem Enabled
[ 0.065611] pnp: PnP ACPI init
[ 0.065644] ACPI: bus type pnp registered
[ 0.065824] pnp 00:00: [bus 00-ff]
[ 0.065830] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.065834] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.065838] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.065842] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.065846] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.065850] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.065954] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.066015] pnp 00:01: [dma 4]
[ 0.066019] pnp 00:01: [io 0x0000-0x000f]
[ 0.066022] pnp 00:01: [io 0x0081-0x0083]
[ 0.066026] pnp 00:01: [io 0x0087]
[ 0.066029] pnp 00:01: [io 0x0089-0x008b]
[ 0.066032] pnp 00:01: [io 0x008f]
[ 0.066035] pnp 00:01: [io 0x00c0-0x00df]
[ 0.066089] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.066107] pnp 00:02: [io 0x0070-0x0071]
[ 0.066114] pnp 00:02: [irq 8]
[ 0.066162] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.066210] pnp 00:03: [io 0x0060]
[ 0.066213] pnp 00:03: [io 0x0064]
[ 0.066217] pnp 00:03: [irq 1]
[ 0.066273] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.066340] pnp 00:04: [irq 12]
[ 0.066393] pnp 00:04: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[ 0.066408] pnp 00:05: [io 0x0061]
[ 0.066455] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.066469] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.066473] pnp 00:06: [irq 13]
[ 0.066519] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.066539] pnp 00:07: [io 0x0010-0x001f]
[ 0.066543] pnp 00:07: [io 0x0022-0x003f]
[ 0.066546] pnp 00:07: [io 0x0044-0x005f]
[ 0.066549] pnp 00:07: [io 0x0063]
[ 0.066552] pnp 00:07: [io 0x0065]
[ 0.066556] pnp 00:07: [io 0x0067-0x006f]
[ 0.066559] pnp 00:07: [io 0x0072-0x007f]
[ 0.066562] pnp 00:07: [io 0x0080]
[ 0.066566] pnp 00:07: [io 0x0084-0x0086]
[ 0.066569] pnp 00:07: [io 0x0088]
[ 0.066572] pnp 00:07: [io 0x008c-0x008e]
[ 0.066576] pnp 00:07: [io 0x0090-0x009f]
[ 0.066579] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.066582] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.066586] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.066589] pnp 00:07: [io 0xfe00-0xfe01]
[ 0.066699] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.066704] system 00:07: [io 0xfe00-0xfe01] has been reserved
[ 0.066710] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.066802] pnp 00:08: [mem 0xff800000-0xffbfffff]
[ 0.066807] pnp 00:08: [mem 0xffc00000-0xffffffff]
[ 0.066876] system 00:08: [mem 0xff800000-0xffbfffff] has been reserved
[ 0.066881] system 00:08: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.066886] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.067085] pnp 00:09: [io 0x0400-0x047f]
[ 0.067090] pnp 00:09: [io 0x0000-0xffffffff disabled]
[ 0.067094] pnp 00:09: [io 0x0000-0xffffffff disabled]
[ 0.067097] pnp 00:09: [io 0x0500-0x053f]
[ 0.067101] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.067105] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.067182] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.067187] system 00:09: [io 0x0500-0x053f] has been reserved
[ 0.067192] system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.067196] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.067202] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.067270] pnp 00:0a: Plug and Play ACPI device, IDs SNY6001 (disabled)
[ 0.067270] pnp: PnP ACPI: found 11 devices
[ 0.067270] ACPI: ACPI bus type pnp unregistered
[ 0.067270] PnPBIOS: Disabled by ACPI PNP
[ 0.105604] Switching to clocksource acpi_pm
[ 0.105643] PCI: max bus depth: 2 pci_try_num: 3
[ 0.105669] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff]
[ 0.105678] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff])
[ 0.105685] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.105689] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.105695] pci 0000:00:01.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.105701] pci 0000:00:01.0: bridge window [mem 0xce900000-0xde9fffff pref]
[ 0.105714] pci 0000:02:01.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
[ 0.105722] pci 0000:02:01.0: BAR 0: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff])
[ 0.105728] pci 0000:02:01.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.105734] pci 0000:02:01.0: BAR 15: assigned [mem 0x8c000000-0x8fffffff pref]
[ 0.105739] pci 0000:02:01.0: BAR 14: assigned [io 0xd000-0xd0ff]
[ 0.105743] pci 0000:02:01.0: BAR 13: assigned [io 0xd400-0xd4ff]
[ 0.105748] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
[ 0.105752] pci 0000:02:01.0: bridge window [io 0xd400-0xd4ff]
[ 0.105758] pci 0000:02:01.0: bridge window [io 0xd000-0xd0ff]
[ 0.105764] pci 0000:02:01.0: bridge window [mem 0x8c000000-0x8fffffff pref]
[ 0.105770] pci 0000:02:01.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.105776] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.105781] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.105788] pci 0000:00:1e.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.105794] pci 0000:00:1e.0: bridge window [mem 0xdea00000-0xdeafffff pref]
[ 0.105817] pci 0000:00:1e.0: setting latency timer to 64
[ 0.105970] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
[ 0.105974] PCI: setting IRQ 9 as level-triggered
[ 0.105981] pci 0000:02:01.0: PCI INT A -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9
[ 0.105991] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.105995] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.106000] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.106004] pci_bus 0000:01: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.106009] pci_bus 0000:01: resource 2 [mem 0xce900000-0xde9fffff pref]
[ 0.106013] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.106017] pci_bus 0000:02: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.106021] pci_bus 0000:02: resource 2 [mem 0xdea00000-0xdeafffff pref]
[ 0.106026] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.106030] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.106034] pci_bus 0000:03: resource 0 [io 0xd400-0xd4ff]
[ 0.106038] pci_bus 0000:03: resource 1 [io 0xd000-0xd0ff]
[ 0.106042] pci_bus 0000:03: resource 2 [mem 0x8c000000-0x8fffffff pref]
[ 0.106047] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.106122] NET: Registered protocol family 2
[ 0.106232] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.106641] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.106690] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.107679] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.107684] TCP reno registered
[ 0.107692] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.107727] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.107933] NET: Registered protocol family 1
[ 0.108217] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.108228] pci 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.108251] pci 0000:00:1d.0: PCI INT A disabled
[ 0.108365] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
[ 0.108369] PCI: setting IRQ 4 as level-triggered
[ 0.108375] pci 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
[ 0.108396] pci 0000:00:1d.1: PCI INT B disabled
[ 0.108504] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 0.108507] PCI: setting IRQ 7 as level-triggered
[ 0.108513] pci 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.108534] pci 0000:00:1d.2: PCI INT C disabled
[ 0.108643] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 0.108646] PCI: setting IRQ 3 as level-triggered
[ 0.108653] pci 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 0.108690] pci 0000:00:1d.7: PCI INT D disabled
[ 0.108715] pci 0000:01:00.0: Boot video device
[ 0.108740] pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.108755] pci 0000:02:04.0: PCI INT A disabled
[ 0.108866] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 0.108871] pci 0000:02:04.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 0.108887] pci 0000:02:04.1: PCI INT B disabled
[ 0.108900] pci 0000:02:04.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.108916] pci 0000:02:04.2: PCI INT C disabled
[ 0.108931] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.108937] PCI: CLS 64 bytes, default 64
[ 0.109540] audit: initializing netlink socket (disabled)
[ 0.109558] type=2000 audit(1407665779.104:1): initialized
[ 0.143915] Trying to unpack rootfs image as initramfs...
[ 0.184796] highmem bounce pool size: 64 pages
[ 0.184807] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.192600] VFS: Disk quotas dquot_6.5.2
[ 0.192729] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.193738] fuse init (API version 7.17)
[ 0.193898] msgmni has been set to 1665
[ 0.208540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.208608] io scheduler noop registered
[ 0.208612] io scheduler deadline registered
[ 0.208625] io scheduler cfq registered (default)
[ 0.208891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.208925] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.209293] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.209987] ACPI: AC Adapter [ACAD] (on-line)
[ 0.210114] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.210124] ACPI: Power Button [PWRB]
[ 0.210207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.210347] ACPI: Lid Switch [LID]
[ 0.211355] Marking TSC unstable due to TSC halts in idle
[ 0.211364] ACPI: acpi_idle registered with cpuidle
[ 0.223228] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.223233] ACPI: Thermal Zone [ATF0] (38 C)
[ 0.223287] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.223308] ACPI: Battery Slot [BAT1] (battery present)
[ 0.223408] ERST: Table is not found!
[ 0.223411] GHES: HEST is not enabled!
[ 0.223571] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.229155] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 0.229190] serial 0000:00:1f.6: PCI INT B disabled
[ 0.229411] Linux agpgart interface v0.103
[ 0.229564] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 0.243098] isapnp: Scanning for PnP cards...
[ 0.305408] ACPI: Battery Slot [BAT1] (battery present)
[ 0.308201] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.313157] brd: module loaded
[ 0.314402] loop: module loaded
[ 0.314690] ata_piix 0000:00:1f.1: version 2.13
[ 0.314709] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.314722] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.314788] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.320053] scsi0 : ata_piix
[ 0.320249] scsi1 : ata_piix
[ 0.322436] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.322442] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.323275] Fixed MDIO Bus: probed
[ 0.323310] tun: Universal TUN/TAP device driver, 1.6
[ 0.323314] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.323535] PPP generic driver version 2.4.2
[ 0.323690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.323723] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 0.323752] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.323757] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.323824] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.323865] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.327761] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.327777] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xff7ffc00
[ 0.391793] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.476837] hub 1-0:1.0: USB hub found
[ 0.476847] hub 1-0:1.0: 6 ports detected
[ 0.476989] ehci_hcd 0000:02:04.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.477019] ehci_hcd 0000:02:04.2: EHCI Host Controller
[ 0.477128] ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 2
[ 0.485088] ata2.00: ATAPI: SONY DVD RW DW-U55A, 2.5a, max UDMA/33
[ 0.485273] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD1A, max UDMA/100
[ 0.485278] ata1.00: 117210240 sectors, multi 16: LBA48
[ 0.529071] ehci_hcd 0000:02:04.2: irq 7, io mem 0xff6fe400
[ 0.579737] ehci_hcd 0000:02:04.2: USB 2.0 started, EHCI 1.00
[ 0.660649] ata2.00: configured for UDMA/33
[ 0.661366] ata1.00: configured for UDMA/100
[ 0.664252] hub 2-0:1.0: USB hub found
[ 0.664260] hub 2-0:1.0: 5 ports detected
[ 0.664400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.664444] ohci_hcd 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.664475] ohci_hcd 0000:02:04.0: OHCI Host Controller
[ 0.664579] ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 3
[ 0.664607] ohci_hcd 0000:02:04.0: irq 9, io mem 0xff6f7000
[ 0.780590] hub 3-0:1.0: USB hub found
[ 0.780601] hub 3-0:1.0: 3 ports detected
[ 0.780734] ohci_hcd 0000:02:04.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 0.780764] ohci_hcd 0000:02:04.1: OHCI Host Controller
[ 0.780841] ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 4
[ 0.780868] ohci_hcd 0000:02:04.1: irq 9, io mem 0xff6fc000
[ 0.832036] isapnp: No Plug & Play device found
[ 0.832584] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[ 0.832942] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.833232] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 0.833307] sd 0:0:0:0: [sda] Write Protect is off
[ 0.833312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.833345] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.834503] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-U55A 2.5a PQ: 0 ANSI: 5
[ 0.866155] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.866161] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.866347] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.866443] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.888181] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.891276] sda: sda1 sda2 < sda5 >
[ 0.891859] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.892142] hub 4-0:1.0: USB hub found
[ 0.892152] hub 4-0:1.0: 2 ports detected
[ 0.892278] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.892341] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.892359] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.892365] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.892451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.892485] uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000e800
[ 0.896297] hub 5-0:1.0: USB hub found
[ 0.896304] hub 5-0:1.0: 2 ports detected
[ 0.896417] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
[ 0.896433] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.896438] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.896516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.896548] uhci_hcd 0000:00:1d.1: irq 4, io base 0x0000e880
[ 0.896767] hub 6-0:1.0: USB hub found
[ 0.896772] hub 6-0:1.0: 2 ports detected
[ 0.896866] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.896878] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.896883] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.896946] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.896974] uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000ec00
[ 0.897179] hub 7-0:1.0: USB hub found
[ 0.897184] hub 7-0:1.0: 2 ports detected
[ 0.897402] usbcore: registered new interface driver libusual
[ 0.897486] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.899741] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.899752] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.904231] mousedev: PS/2 mouse device common for all mice
[ 0.904444] rtc_cmos 00:02: RTC can wake from S4
[ 0.904579] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.904607] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.904748] device-mapper: uevent: version 1.0.3
[ 0.904864] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.904910] EISA: Probing bus 0 at eisa.0
[ 0.904953] EISA: Detected 0 cards.
[ 0.904969] cpufreq-nforce2: No nForce2 chipset.
[ 0.905016] cpuidle: using governor ladder
[ 0.905081] cpuidle: using governor menu
[ 0.905084] EFI Variables Facility v0.08 2004-May-17
[ 0.905505] TCP cubic registered
[ 0.905720] NET: Registered protocol family 10
[ 0.906605] NET: Registered protocol family 17
[ 0.906612] Registering the dns_resolver key type
[ 0.906642] Using IPI No-Shortcut mode
[ 0.906790] PM: Hibernation image not present or could not be loaded.
[ 0.906808] registered taskstats version 1
[ 0.928891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.333527] Freeing initrd memory: 20424k freed
[ 1.365163] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[ 1.369551] Initializing USB Mass Storage driver...
[ 1.371243] scsi2 : usb-storage 1-1:1.0
[ 1.371383] usbcore: registered new interface driver usb-storage
[ 1.371386] USB Mass Storage support registered.
[ 1.377351] Magic number: 10:541:274
[ 1.377447] tty tty11: hash matches
[ 1.377527] rtc_cmos 00:02: setting system clock to 2014-08-10 10:16:21 UTC (1407665781)
[ 1.378172] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.378175] EDD information not available.
[ 1.378356] Freeing unused kernel memory: 716k freed
[ 1.378835] Write protecting the kernel text: 5652k
[ 1.378894] Write protecting the kernel read-only data: 2336k
[ 1.405116] udevd[92]: starting version 175
[ 1.597107] [drm] Initialized drm 1.1.0 20060810
[ 1.650767] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.650773] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.651001] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[ 1.651010] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
[ 1.729085] [drm] radeon defaulting to kernel modesetting.
[ 1.729090] [drm] radeon kernel modesetting enabled.
[ 1.729185] radeon 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
[ 1.732902] [drm] initializing kernel modesetting (RV280 0x1002:0x5C61 0x104D:0x8189).
[ 1.732927] [drm] register mmio base: 0xFF5F0000
[ 1.732929] [drm] register mmio size: 65536
[ 1.733178] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 1.733192] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 1.733233] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 1.733280] radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF
[ 1.733286] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.733292] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (64M used)
[ 1.734622] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.734627] [drm] RAM width 128bits DDR
[ 1.737839] [TTM] Zone kernel: Available graphics memory: 437022 kiB.
[ 1.737844] [TTM] Zone highmem: Available graphics memory: 1030562 kiB.
[ 1.737847] [TTM] Initializing pool allocator.
[ 1.737882] [drm] radeon: 64M of VRAM memory ready
[ 1.737886] [drm] radeon: 256M of GTT memory ready.
[ 1.738957] radeon 0000:01:00.0: WB disabled
[ 1.738967] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.738970] [drm] Driver supports precise vblank timestamp query.
[ 1.738992] [drm] radeon: irq initialized.
[ 1.739089] [drm] Loading R200 Microcode
[ 1.785606] [drm] radeon: ring at 0x00000000E0001000
[ 1.785630] [drm] ring test succeeded in 1 usecs
[ 1.785926] [drm] radeon: ib pool ready.
[ 1.786037] [drm] ib test succeeded in 0 usecs
[ 1.786349] [drm] Panel ID String: 1024x768
[ 1.786353] [drm] Panel Size 1024x768
[ 1.797365] [drm] radeon legacy LVDS backlight initialized
[ 1.801919] [drm] Radeon Display Connectors
[ 1.801924] [drm] Connector 0:
[ 1.801927] [drm] VGA
[ 1.801931] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.801934] [drm] Encoders:
[ 1.801936] [drm] CRT1: INTERNAL_DAC1
[ 1.801939] [drm] Connector 1:
[ 1.801941] [drm] DVI-D
[ 1.801943] [drm] HPD1
[ 1.801947] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.801949] [drm] Encoders:
[ 1.801952] [drm] DFP1: INTERNAL_TMDS1
[ 1.801954] [drm] Connector 2:
[ 1.801956] [drm] LVDS
[ 1.801959] [drm] Encoders:
[ 1.801961] [drm] LCD1: INTERNAL_LVDS
[ 1.801963] [drm] Connector 3:
[ 1.801965] [drm] S-video
[ 1.801967] [drm] Encoders:
[ 1.801970] [drm] TV1: INTERNAL_DAC2
[ 1.824300] e100 0000:02:08.0: PME# disabled
[ 1.825210] e100 0000:02:08.0: eth0: addr 0xff6f6000, irq 9, MAC addr 08:00:46:d9:bd:e5
[ 1.825252] firewire_ohci 0000:02:01.2: PCI INT C -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 1.855813] [drm] fb mappable at 0xD0040000
[ 1.855818] [drm] vram apper at 0xD0000000
[ 1.855821] [drm] size 3145728
[ 1.855823] [drm] fb depth is 24
[ 1.855825] [drm] pitch is 4096
[ 1.855975] fbcon: radeondrmfb (fb0) is primary device
[ 1.856358] Console: switching to colour frame buffer device 128x48
[ 1.856404] fb0: radeondrmfb frame buffer device
[ 1.856407] drm: registered panic notifier
[ 1.856420] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 1.861646] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input3
[ 1.862000] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1.862262] usbcore: registered new interface driver usbhid
[ 1.862266] usbhid: USB HID core driver
[ 1.880093] firewire_ohci: Added fw-ohci device 0000:02:01.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.380218] firewire_core: created device fw0: GUID 0800460301a52d28, S400
[ 2.382802] scsi 2:0:0:0: Direct-Access OEM Ext Hard Disk 0000 PQ: 0 ANSI: 5
[ 2.401633] scsi 2:0:0:1: CD-ROM Virtual CDROM PQ: 0 ANSI: 0
[ 2.403661] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.448374] sd 2:0:0:0: [sdb] 121914886 4096-byte logical blocks: (499 GB/465 GiB)
[ 2.501228] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.501234] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
[ 2.532478] sr1: scsi-1 drive
[ 2.533250] sr 2:0:0:1: Attached scsi CD-ROM sr1
[ 2.533407] sr 2:0:0:1: Attached scsi generic sg3 type 5
[ 2.554365] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.654957] sd 2:0:0:0: [sdb] 121914886 4096-byte logical blocks: (499 GB/465 GiB)
[ 3.040545] sdb: sdb1 sdb2
[ 3.091766] sd 2:0:0:0: [sdb] 121914886 4096-byte logical blocks: (499 GB/465 GiB)
[ 3.279274] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.493303] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.008452] Adding 2437116k swap on /dev/sda5. Priority:-1 extents:1 across:2437116k
[ 26.026548] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.079460] udevd[418]: starting version 175
[ 26.141963] lp: driver loaded but no devices found
[ 26.226420] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 26.380065] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.632113] asus_laptop: Asus Laptop Support version 0.42
[ 26.632220] asus_laptop: Error calling BSTS
[ 26.632225] asus_laptop: Error calling CWAP(1)
[ 26.632229] asus_laptop: SE model detected
[ 26.632234] asus_laptop: Error setting bluetooth status to 1
[ 26.632238] asus_laptop: Error setting wlan status to 1
[ 26.641431] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input4
[ 26.648793] Bluetooth: Core ver 2.16
[ 26.649225] NET: Registered protocol family 31
[ 26.649229] Bluetooth: HCI device and connection manager initialized
[ 26.649234] Bluetooth: HCI socket layer initialized
[ 26.649238] Bluetooth: L2CAP socket layer initialized
[ 26.649246] Bluetooth: SCO socket layer initialized
[ 26.653632] ppdev: user-space parallel port driver
[ 26.685502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.685508] Bluetooth: BNEP filters: protocol multicast
[ 26.709732] Bluetooth: RFCOMM TTY layer initialized
[ 26.709740] Bluetooth: RFCOMM socket layer initialized
[ 26.709744] Bluetooth: RFCOMM ver 1.11
[ 26.825489] type=1400 audit(1407665806.945:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=620 comm="apparmor_parser"
[ 26.829044] type=1400 audit(1407665806.949:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=620 comm="apparmor_parser"
[ 26.990076] sony_laptop: Sony Programmable IO Control Driver v0.6
[ 26.990097] sony_laptop: detected Type2 model
[ 26.993016] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0f/SNY6001:00/input/input5
[ 26.994510] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 26.994824] sony_laptop: device allocated minor is 57
[ 27.011450] sony_laptop: Sony Notebook Control Driver v0.6
[ 27.070726] lib80211: common routines for IEEE802.11 drivers
[ 27.070734] lib80211_crypt: registered algorithm 'NULL'
[ 27.099680] yenta_cardbus 0000:02:01.0: CardBus bridge found [104d:818f]
[ 27.099699] yenta_cardbus 0000:02:01.0: Enabling burst memory read transactions
[ 27.099705] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 27.099709] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 27.099716] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01001b22, devctl 0x64
[ 27.113026] intel_rng: FWH not detected
[ 27.178588] cfg80211: Calling CRDA to update world regulatory domain
[ 27.185365] libipw: 802.11 data/management/control stack, git-1.1.13
[ 27.185370] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 27.218616] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 27.218621] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 27.305625] type=1400 audit(1407665807.425:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=659 comm="apparmor_parser"
[ 27.312462] type=1400 audit(1407665807.433:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=659 comm="apparmor_parser"
[ 27.312927] type=1400 audit(1407665807.433:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=659 comm="apparmor_parser"
[ 27.328406] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c20, PCI irq 9
[ 27.328413] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 27.328420] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 27.328435] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0xd000-0xdfff]
[ 27.328441] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: excluding 0xd000-0xd0ff 0xd400-0xd4ff 0xdc00-0xdc3f
[ 27.412757] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xff600000-0xff6fffff]
[ 27.412765] pcmcia_socket pcmcia_socket0: cs: memory probe 0xff600000-0xff6fffff: excluding 0xff6f0000-0xff6fffff
[ 27.412782] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdea00000-0xdeafffff pref]
[ 27.412788] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff
[ 27.448415] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
[ 27.448422] PCI: setting IRQ 5 as level-triggered
[ 27.448431] tifm_7xx1 0000:02:01.3: PCI INT B -> Link[LNKG] -> GSI 5 (level, low) -> IRQ 5
[ 27.448801] ipw2200 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 27.448839] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 27.472093] tifm_core: MMC/SD card detected in socket 0:0
[ 27.899521] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 27.899563] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 27.951014] cfg80211: World regulatory domain updated:
[ 27.951022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.951027] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.951031] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.951036] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.951040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.951045] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.000836] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 28.057316] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 28.070587] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x400-0x47f 0x4d0-0x4d7
[ 28.071046] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 28.071711] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 28.134141] ipw2200: Radio Frequency Kill Switch is On:
[ 28.134144] Kill switch must be turned off for wireless networking to work.
[ 28.141973] cfg80211: failed to add phy80211 symlink to netdev!
[ 28.196446] clean.
[ 28.196536] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 28.196577] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 28.196616] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 28.196654] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 28.208166] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208173] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208178] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208187] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208192] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208196] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208205] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208213] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208218] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208222] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208227] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208231] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208240] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208245] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208249] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208254] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208258] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.208266] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208271] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.208275] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 28.208280] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 28.229882] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 28.237254] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 28.375096] init: failsafe main process (784) killed by TERM signal
[ 28.641314] type=1400 audit(1407665808.760:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=883 comm="apparmor_parser"
[ 28.641980] type=1400 audit(1407665808.760:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=883 comm="apparmor_parser"
[ 28.650901] type=1400 audit(1407665808.768:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=885 comm="apparmor_parser"
[ 28.651689] type=1400 audit(1407665808.768:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=885 comm="apparmor_parser"
[ 28.652665] type=1400 audit(1407665808.772:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=885 comm="apparmor_parser"
[ 28.722376] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.745260] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.746345] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.748168] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 28.748733] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.972056] intel8x0_measure_ac97_clock: measured 55369 usecs (2668 samples)
[ 28.972062] intel8x0: clocking to 48000
[ 29.403207] init: kdm main process (976) killed by TERM signal
[ 31.024049] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 31.212763] init: plymouth-stop pre-start process (1355) terminated with status 1
[ 33.628041] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 38.888030] eth0: no IPv6 routers present
~$
Damit kann ich leider nichts anfangen.
syslog:
Aug 10 12:31:16 VGN-A115B rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="604" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Aug 10 12:31:17 VGN-A115B rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="604" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Aug 10 12:31:54 VGN-A115B anacron[1007]: Job `cron.daily' terminated
Aug 10 12:31:54 VGN-A115B anacron[1007]: Normal exit (1 job run)
Aug 10 13:00:14 VGN-A115B sudo: pam_ecryptfs: pam_sm_authenticate: /home/<username> is already mounted
Damit auch nicht.