Hallihallo, ich habe folgendes Problem: Seit dem Update auf Karmic geht das WLAN nicht mehr so wie es sollte. Das gewünschte Netzwerk wird zwar angezeigt aber der Verbindungsaufbau schlägt fehl. Es wird eine Weile "Schnittstelle wird eingerichtet" angezeigt und dann abgebrochen. Router ist ein Siemens ADSL SL2-141-I Der Laptop bei dem es Probleme gibt ist ein Lenovo 3000 N200. Das Kabelnetzwerk funktioniert ohne Probleme.
Verwendete Kernelversion
uname -a Linux ninaa 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
Abfrage für PCI und PCMCIA-Karten:
lspci -nnk | grep -i net -A2 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945 06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Kernel driver in use: tg3 Kernel modules: tg3
3. Wie ist das Netzwerk konfiguriert?
nina@ninaa:~$ egrep -v "^$|^#" /etc/network/interfaces auto lo iface lo inet loopback nina@ninaa:~$ egrep -v "^$|^#" /etc/resolv.conf nameserver 192.168.1.1 search home nina@ninaa:~$ egrep -v "^$|^#" /etc/hosts 127.0.0.1 localhost 127.0.1.1 ninaa ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts
ifconfig eth0 Link encap:Ethernet Hardware Adresse 00:1e:ec:0b:83:30 inet Adresse:192.168.1.103 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21e:ecff:fe0b:8330/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:2327 errors:0 dropped:0 overruns:0 frame:0 TX packets:2143 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:2653851 (2.6 MB) TX bytes:289650 (289.6 KB) Interrupt:19 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metrik:1 RX packets:82 errors:0 dropped:0 overruns:0 frame:0 TX packets:82 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:4140 (4.1 KB) TX bytes:4140 (4.1 KB) wlan0 Link encap:Ethernet Hardware Adresse 00:1f:3c:9d:31:c6 UP BROADCAST MULTICAST MTU:1500 Metrik:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster0 Link encap:UNSPEC Hardware Adresse 00-1F-3C-9D-31-C6-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metrik:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
nina@ninaa:~$ route -n Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
nina@ninaa:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11abg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions.
Die Pings funktionieren mit Kabel alle, ohne Kabel garnicht. Das gesuchte Netz wird gefunden aber die Verschlüsselung wird nicht richtig erkannt (None wird automatisch genommen). Ich bin mir auch nicht sicher, was ich da genau einstellen muss. WEP ist klar aber dann Passphrase (128 bit) oder Key (64 or 128 Bit) WEP index ? habs auf 1 (Default) gelassen Authentication: Open System oder Shared Key Dazu: Ich habe einen 13-stelligen Schlüssel
nina@ninaa:~$ iwlist chan lo no frequency information. eth0 no frequency information. wmaster0 no frequency information. wlan0 32 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Channel 34 : 5.17 GHz Channel 36 : 5.18 GHz Channel 38 : 5.19 GHz Channel 40 : 5.2 GHz Channel 42 : 5.21 GHz Channel 44 : 5.22 GHz Channel 46 : 5.23 GHz Channel 48 : 5.24 GHz Channel 52 : 5.26 GHz Channel 56 : 5.28 GHz Channel 60 : 5.3 GHz Channel 64 : 5.32 GHz Channel 100 : 5.5 GHz Channel 104 : 5.52 GHz Channel 108 : 5.54 GHz Channel 112 : 5.56 GHz Channel 116 : 5.58 GHz Channel 120 : 5.6 GHz Channel 124 : 5.62 GHz Current Frequency:2.412 GHz (Channel 1) pan0 no frequency information.
nina@ninaa:~$ sudo iwlist scan [sudo] password for nina: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: 00:21:63:1A:CD:E9 Channel:11 Frequency:2.462 GHz (Channel 11) Quality=70/70 Signal level=-30 dBm Encryption key:on ESSID:"ALICE-WLAN" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000000365613b184 Extra: Last beacon: 2316ms ago IE: Unknown: 000A414C4943452D574C414E IE: Unknown: 010882848B962430486C IE: Unknown: 03010B IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: DD06001018020100 pan0 Interface doesn't support scanning.
ALICE-WLAN soll genutzt werden
lsmod Module Size Used by binfmt_misc 8356 1 ppdev 6688 0 bridge 47952 0 stp 2272 1 bridge bnep 12060 2 snd_hda_codec_realtek 203328 1 snd_hda_intel 26920 3 snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel arc4 1660 2 snd_hwdep 7200 1 snd_hda_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss ecb 2524 2 snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss iwl3945 77212 0 iwlcore 112508 1 iwl3945 snd_seq_dummy 2656 0 snd_seq_oss 28576 0 snd_seq_midi 6432 0 snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi joydev 10272 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event sdhci_pci 7100 0 snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq iptable_filter 3100 0 sbp2 22888 0 mac80211 181236 2 iwl3945,iwlcore sdhci 17472 1 sdhci_pci uvcvideo 59080 0 ip_tables 11692 1 iptable_filter snd 59204 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 36736 1 uvcvideo v4l1_compat 14496 2 uvcvideo,videodev led_class 4096 3 iwl3945,iwlcore,sdhci btusb 11856 2 psmouse 56180 0 soundcore 7264 1 snd snd_page_alloc 9156 2 snd_hda_intel,snd_pcm lp 8964 0 x_tables 16544 1 ip_tables serio_raw 5280 0 cfg80211 93052 3 iwl3945,iwlcore,mac80211 parport 35340 2 ppdev,lp usbhid 38208 0 fbcon 36640 72 tileblit 2460 1 fbcon font 8124 1 fbcon bitblit 5372 1 fbcon softcursor 1756 1 bitblit ohci1394 29900 0 ieee1394 86596 2 sbp2,ohci1394 tg3 109600 0 i915 221064 2 drm 159584 2 i915 i2c_algo_bit 5760 1 i915 intel_agp 27484 2 i915 agpgart 34988 2 drm,intel_agp video 19380 1 i915 output 2780 1 video
dmesg | egrep iwl [ 10.638848] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 10.638851] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 10.638924] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.638939] iwl3945 0000:04:00.0: setting latency timer to 64 [ 10.708895] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 10.708898] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 10.709050] iwl3945 0000:04:00.0: irq 30 for MSI/MSI-X [ 11.620808] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 18.393404] iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 18.520408] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9 [ 18.588592] Registered led device: iwl-phy0::radio [ 18.588607] Registered led device: iwl-phy0::assoc [ 18.588621] Registered led device: iwl-phy0::RX [ 18.588634] Registered led device: iwl-phy0::TX
Ich hoffe, mir kann jemand helfen. Hab auch schon verschiedene andere Threads durchforstet aber ohne Erfolg. Grüße und Danke im Voraus Vexi