Servus
hab eine Delock USB 3.0 PCIe Karte gekauft, die ab Kernel 2.6. funktionieren soll.
http://www.delock.com/produkte/G_89281/merkmale.html
Leider tut sich nix, wenn ich da was einsteck!
Mint 14 64
lspci lsusb
root@andreas-linux-dt:~# lspci 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] (rev 02) 01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 01:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 03:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) 04:00.0 USB controller: VIA Technologies, Inc. Device 3432 (rev 02) 05:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46) 06:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1) 06:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1) root@andreas-linux-dt:~# lsusb Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 004 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 004 Device 003: ID 045e:0730 Microsoft Corp. Digital Media Keyboard 3000 Bus 006 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB root@andreas-linux-dt:~#
dmesg | grep -i xhci
andreas@andreas-linux-dt:~$ dmesg | grep -i xhci [ 0.713189] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.713193] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 0.713460] xhci_hcd 0000:04:00.0: irq 16, io mem 0xfbeff000 [ 0.713515] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 0.713566] usb usb8: Product: xHCI Host Controller [ 0.713567] usb usb8: Manufacturer: Linux 3.5.0-19-generic xhci_hcd [ 0.713624] xHCI xhci_add_endpoint called for root hub [ 0.713626] xHCI xhci_check_bandwidth called for root hub [ 0.713689] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.713693] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 [ 0.713725] usb usb9: Product: xHCI Host Controller [ 0.713727] usb usb9: Manufacturer: Linux 3.5.0-19-generic xhci_hcd [ 0.713789] xHCI xhci_add_endpoint called for root hub [ 0.713791] xHCI xhci_check_bandwidth called for root hub [ 3.000011] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 3.264537] usb 9-4: new SuperSpeed USB device number 2 using xhci_hcd [ 39.060535] usb 9-4: new SuperSpeed USB device number 3 using xhci_hcd [ 77.944008] xhci_hcd 0000:04:00.0: Timeout while waiting for address device command [ 77.948001] xhci_hcd 0000:04:00.0: Stopped the command ring failed, maybe the host is dead [ 77.948001] xhci_hcd 0000:04:00.0: Abort command ring failed [ 88.222107] xhci_hcd 0000:04:00.0: HC died; cleaning up andreas@andreas-linux-dt:~$
dmesg
[ 0.184940] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.184957] pci 0000:00:1e.0: setting latency timer to 64 [ 0.184960] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.184962] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.184964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.184965] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.184967] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] [ 0.184969] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.184970] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfebfffff] [ 0.184972] pci_bus 0000:06: resource 2 [mem 0xe4000000-0xefffffff 64bit pref] [ 0.184974] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.184975] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.184977] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.184979] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.184981] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.184982] pci_bus 0000:03: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref] [ 0.184984] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.184986] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe07fffff] [ 0.184987] pci_bus 0000:02: resource 2 [mem 0xe3f00000-0xe3ffffff 64bit pref] [ 0.184989] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.184990] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.184992] pci_bus 0000:01: resource 2 [mem 0xe0800000-0xe09fffff 64bit pref] [ 0.184994] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.184996] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.184997] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.184999] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.185000] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.185002] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.185003] pci_bus 0000:05: resource 8 [mem 0xe0000000-0xffffffff] [ 0.185039] NET: Registered protocol family 2 [ 0.185228] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.186852] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.189604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.190028] TCP: Hash tables configured (established 524288 bind 65536) [ 0.190030] TCP: reno registered [ 0.190042] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.190101] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.190246] NET: Registered protocol family 1 [ 0.190456] pci 0000:06:00.0: Boot video device [ 0.190507] PCI: CLS 32 bytes, default 64 [ 0.190509] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.190511] software IO TLB [mem 0xdbf96000-0xdff95fff] (64MB) mapped at [ffff8800dbf96000-ffff8800dff95fff] [ 0.190988] audit: initializing netlink socket (disabled) [ 0.190996] type=2000 audit(1355742773.184:1): initialized [ 0.209561] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.211587] VFS: Disk quotas dquot_6.5.2 [ 0.211624] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.212060] fuse init (API version 7.19) [ 0.212139] msgmni has been set to 15921 [ 0.212613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.212643] io scheduler noop registered [ 0.212645] io scheduler deadline registered (default) [ 0.212668] io scheduler cfq registered [ 0.212790] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.212868] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.212965] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.213060] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.213155] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.213241] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.213243] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 0.213245] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt [ 0.213248] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.213261] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.213262] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 0.213265] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.213280] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.213282] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.213285] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.213298] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.213299] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.213302] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.213315] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.213317] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.213319] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.213322] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.213337] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.213378] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1849 ss_did 283f [ 0.213392] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.213400] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2841 ss_vid 1849 ss_did 2841 [ 0.213412] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.213420] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1849 ss_did 2843 [ 0.213433] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.213441] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 1849 ss_did 2845 [ 0.213458] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.213463] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.213505] intel_idle: does not run on family 6 model 23 [ 0.213573] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.213577] ACPI: Power Button [PWRB] [ 0.213612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.213614] ACPI: Power Button [PWRF] [ 0.213686] ACPI: Requesting acpi_cpufreq [ 0.471777] Freeing initrd memory: 22464k freed [ 0.481116] GHES: HEST is not enabled! [ 0.481205] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.501521] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.522977] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.523147] Linux agpgart interface v0.103 [ 0.524610] brd: module loaded [ 0.525280] loop: module loaded [ 0.525385] ata_piix 0000:00:1f.2: version 2.13 [ 0.525398] ata_piix 0000:00:1f.2: MAP [ [ 0.525399] P0 P2 P1 P3 ] [ 0.680031] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.680258] scsi0 : ata_piix [ 0.680328] scsi1 : ata_piix [ 0.680969] ata1: SATA max UDMA/133 cmd 0x8080 ctl 0x8000 bmdma 0x7800 irq 19 [ 0.680973] ata2: SATA max UDMA/133 cmd 0x7c00 ctl 0x7880 bmdma 0x7808 irq 19 [ 0.680994] ata_piix 0000:00:1f.5: MAP [ [ 0.680996] P0 -- P1 -- ] [ 0.681041] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.681209] scsi2 : ata_piix [ 0.681271] scsi3 : ata_piix [ 0.681878] ata3: SATA max UDMA/133 cmd 0x9080 ctl 0x9000 bmdma 0x8800 irq 19 [ 0.681881] ata4: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8808 irq 19 [ 0.682152] Fixed MDIO Bus: probed [ 0.682187] tun: Universal TUN/TAP device driver, 1.6 [ 0.682188] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.682232] PPP generic driver version 2.4.2 [ 0.682280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.682316] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.682319] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.682325] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.682349] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.686227] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.686238] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbbffc00 [ 0.696018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.696044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.696046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.696048] usb usb1: Product: EHCI Host Controller [ 0.696050] usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd [ 0.696051] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.696137] hub 1-0:1.0: USB hub found [ 0.696140] hub 1-0:1.0: 4 ports detected [ 0.696201] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.696204] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.696207] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.696231] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.700113] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.700123] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbbff800 [ 0.712019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.712043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.712045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712047] usb usb2: Product: EHCI Host Controller [ 0.712048] usb usb2: Manufacturer: Linux 3.5.0-19-generic ehci_hcd [ 0.712050] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.712128] hub 2-0:1.0: USB hub found [ 0.712131] hub 2-0:1.0: 6 ports detected [ 0.712188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.712201] uhci_hcd: USB Universal Host Controller Interface driver [ 0.712215] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.712218] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.712223] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.712251] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009880 [ 0.712277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.712279] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712281] usb usb3: Product: UHCI Host Controller [ 0.712282] usb usb3: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.712284] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.712360] hub 3-0:1.0: USB hub found [ 0.712363] hub 3-0:1.0: 2 ports detected [ 0.712417] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.712420] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.712424] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.712450] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009c00 [ 0.712476] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.712478] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712479] usb usb4: Product: UHCI Host Controller [ 0.712481] usb usb4: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.712482] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.712560] hub 4-0:1.0: USB hub found [ 0.712563] hub 4-0:1.0: 2 ports detected [ 0.712612] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.712615] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.712619] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.712637] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009400 [ 0.712668] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.712669] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712671] usb usb5: Product: UHCI Host Controller [ 0.712673] usb usb5: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.712674] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.712747] hub 5-0:1.0: USB hub found [ 0.712750] hub 5-0:1.0: 2 ports detected [ 0.712799] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.712802] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.712806] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.712824] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480 [ 0.712851] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.712853] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712855] usb usb6: Product: UHCI Host Controller [ 0.712856] usb usb6: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.712858] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.712932] hub 6-0:1.0: USB hub found [ 0.712935] hub 6-0:1.0: 2 ports detected [ 0.712987] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.712990] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.712994] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.713012] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800 [ 0.713040] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.713042] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713043] usb usb7: Product: UHCI Host Controller [ 0.713045] usb usb7: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.713046] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.713118] hub 7-0:1.0: USB hub found [ 0.713121] hub 7-0:1.0: 2 ports detected [ 0.713196] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.713200] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 0.713476] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbdff000 [ 0.713534] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.713581] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.713583] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713585] usb usb8: Product: xHCI Host Controller [ 0.713586] usb usb8: Manufacturer: Linux 3.5.0-19-generic xhci_hcd [ 0.713588] usb usb8: SerialNumber: 0000:03:00.0 [ 0.713644] xHCI xhci_add_endpoint called for root hub [ 0.713645] xHCI xhci_check_bandwidth called for root hub [ 0.713664] hub 8-0:1.0: USB hub found [ 0.713668] hub 8-0:1.0: 1 port detected [ 0.713710] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.713713] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 0.713741] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.713743] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713745] usb usb9: Product: xHCI Host Controller [ 0.713746] usb usb9: Manufacturer: Linux 3.5.0-19-generic xhci_hcd [ 0.713748] usb usb9: SerialNumber: 0000:03:00.0 [ 0.713803] xHCI xhci_add_endpoint called for root hub [ 0.713805] xHCI xhci_check_bandwidth called for root hub [ 0.713821] hub 9-0:1.0: USB hub found [ 0.713828] hub 9-0:1.0: 4 ports detected [ 0.713947] usbcore: registered new interface driver libusual [ 0.713980] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.716446] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.716450] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.716559] mousedev: PS/2 mouse device common for all mice [ 0.716683] rtc_cmos 00:03: RTC can wake from S4 [ 0.716785] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.716804] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.716866] device-mapper: uevent: version 1.0.3 [ 0.716924] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.716931] cpuidle: using governor ladder [ 0.716932] cpuidle: using governor menu [ 0.716933] EFI Variables Facility v0.08 2004-May-17 [ 0.717102] ashmem: initialized [ 0.717212] TCP: cubic registered [ 0.717297] NET: Registered protocol family 10 [ 0.717465] NET: Registered protocol family 17 [ 0.717473] Key type dns_resolver registered [ 0.717608] PM: Hibernation image not present or could not be loaded. [ 0.717619] registered taskstats version 1 [ 0.719981] Key type trusted registered [ 0.721653] Key type encrypted registered [ 0.723518] Magic number: 8:647:226 [ 0.723635] rtc_cmos 00:03: setting system clock to 2012-12-17 11:12:54 UTC (1355742774) [ 0.724198] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.724200] EDD information not available. [ 1.010608] ata4: SATA link down (SStatus 0 SControl 300) [ 1.156046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.164122] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100 [ 1.180119] ata3.00: configured for UDMA/100 [ 1.188018] Refined TSC clocksource calibration: 2659.601 MHz. [ 1.188022] Switching to clocksource tsc [ 1.330542] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.330553] ata1.01: SATA link down (SStatus 4 SControl 300) [ 1.376009] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.484050] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.484059] ata2.01: SATA link down (SStatus 4 SControl 300) [ 1.509187] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.509189] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.509191] usb 2-1: Product: USB2.0 Hub [ 1.509458] hub 2-1:1.0: USB hub found [ 1.509686] hub 2-1:1.0: 4 ports detected [ 1.541780] ata2.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133 [ 1.541782] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.608412] ata2.00: configured for UDMA/133 [ 1.608511] scsi 1:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 [ 1.608620] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.608628] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.608684] sd 1:0:0:0: [sda] Write Protect is off [ 1.608687] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.608708] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.660545] sda: sda1 sda2 < sda5 > [ 1.660762] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.661920] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5 [ 1.663966] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.663968] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.664037] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.664088] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.665183] Freeing unused kernel memory: 928k freed [ 1.665364] Write protecting the kernel read-only data: 12288k [ 1.668945] Freeing unused kernel memory: 1464k freed [ 1.671836] Freeing unused kernel memory: 1120k freed [ 1.686123] udevd[109]: starting version 175 [ 1.717677] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.717774] r8169 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.717949] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000c74000, bc:5f:f4:47:8f:bb, XID 081000c0 IRQ 46 [ 1.717952] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.725443] sata_sil24 0000:04:00.0: version 1.1 [ 1.726942] scsi4 : sata_sil24 [ 1.727927] scsi5 : sata_sil24 [ 1.727984] ata5: SATA max UDMA/100 host m128@0xfbeffc00 port 0xfbef8000 irq 16 [ 1.727987] ata6: SATA max UDMA/100 host m128@0xfbeffc00 port 0xfbefa000 irq 16 [ 1.780051] firewire_ohci 0000:01:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.780134] pata_via 0000:01:00.1: version 0.3.4 [ 1.780454] scsi6 : pata_via [ 1.780515] scsi7 : pata_via [ 1.780642] ata7: PATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 [ 1.780644] ata8: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 [ 1.844048] firewire_ohci 0000:05:01.0: added OHCI v1.0 device as card 1, 8 IR + 8 IT contexts, quirks 0x11 [ 1.860019] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 2.033523] usb 4-1: New USB device found, idVendor=046d, idProduct=c00c [ 2.033526] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.033528] usb 4-1: Product: USB Mouse [ 2.033530] usb 4-1: Manufacturer: Logitech [ 2.276007] usb 4-2: new low-speed USB device number 3 using uhci_hcd [ 2.280063] firewire_core 0000:01:00.0: created device fw0: GUID 008f1300aba61200, S400 [ 2.344050] firewire_core 0000:05:01.0: created device fw1: GUID 0005ce0088101bbf, S400 [ 2.459535] usb 4-2: New USB device found, idVendor=045e, idProduct=0730 [ 2.459537] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.459538] usb 4-2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard 3000 [ 2.459540] usb 4-2: Manufacturer: Microsoft [ 2.494074] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2 [ 2.494158] microsoft 0003:045E:0730.0002: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard 3000] on usb-0000:00:1a.1-2/input0 [ 2.523667] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input3 [ 2.523740] microsoft 0003:045E:0730.0003: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard 3000] on usb-0000:00:1a.1-2/input1 [ 2.523756] usbcore: registered new interface driver usbhid [ 2.523758] usbhid: USB HID core driver [ 2.700008] usb 6-2: new full-speed USB device number 2 using uhci_hcd [ 2.887931] usb 6-2: New USB device found, idVendor=046d, idProduct=08da [ 2.887933] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.000011] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 3.016815] usb 8-1: New USB device found, idVendor=2109, idProduct=0811 [ 3.016818] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.016819] usb 8-1: Product: USB2.0 Hub [ 3.017258] hub 8-1:1.0: USB hub found [ 3.017402] hub 8-1:1.0: 4 ports detected [ 3.264555] usb 9-4: new SuperSpeed USB device number 2 using xhci_hcd [ 3.281078] usb 9-4: Parent hub missing LPM exit latency info. Power management will be impacted. [ 3.282657] usb 9-4: New USB device found, idVendor=05dc, idProduct=b049 [ 3.282659] usb 9-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 3.282661] usb 9-4: Product: USB_3_0 Reader [ 3.282662] usb 9-4: Manufacturer: Lexar [ 3.282664] usb 9-4: SerialNumber: 000000006358 [ 3.284467] Initializing USB Mass Storage driver... [ 3.284589] scsi8 : usb-storage 9-4:1.0 [ 3.284649] usbcore: registered new interface driver usb-storage [ 3.284651] USB Mass Storage support registered. [ 3.284653] usbcore: registered new interface driver uas [ 3.480255] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd [ 3.573255] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0608 [ 3.573257] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.573259] usb 2-1.4: Product: USB2.0 Hub [ 3.573534] hub 2-1.4:1.0: USB hub found [ 3.573881] hub 2-1.4:1.0: 4 ports detected [ 3.808021] ata5: SATA link down (SStatus 0 SControl 0) [ 4.284712] scsi 8:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 4.285182] scsi 8:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 4.285625] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 4.285750] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 4.492487] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 4.492676] sd 8:0:0:1: [sdc] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB) [ 4.493398] sd 8:0:0:1: [sdc] Write Protect is off [ 4.493400] sd 8:0:0:1: [sdc] Mode Sense: 21 00 00 00 [ 4.494160] sd 8:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.497972] sdc: sdc1 [ 4.499851] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 5.888020] ata6: SATA link down (SStatus 0 SControl 0) [ 6.049062] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4 [ 6.049200] hid-generic 0003:046D:C00C.0001: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.1-1/input0 [ 12.576019] usb 9-4: USB disconnect, device number 2 [ 38.816240] sd 8:0:0:0: Device offlined - not ready after error recovery [ 39.060552] usb 9-4: new SuperSpeed USB device number 3 using xhci_hcd [ 39.077072] usb 9-4: Parent hub missing LPM exit latency info. Power management will be impacted. [ 39.078585] usb 9-4: New USB device found, idVendor=05dc, idProduct=b049 [ 39.078587] usb 9-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 39.078589] usb 9-4: Product: USB_3_0 Reader [ 39.078591] usb 9-4: Manufacturer: Lexar [ 39.078592] usb 9-4: SerialNumber: 000000006358 [ 39.079325] scsi9 : usb-storage 9-4:1.0 [ 39.522269] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 39.522272] EXT4-fs (dm-1): write access will be enabled during recovery [ 40.076799] scsi 9:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 40.077273] scsi 9:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 40.077771] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 40.078128] sd 9:0:0:1: Attached scsi generic sg3 type 0 [ 40.285358] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 40.285542] sd 9:0:0:1: [sdc] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB) [ 40.287067] sd 9:0:0:1: [sdc] Write Protect is off [ 40.287069] sd 9:0:0:1: [sdc] Mode Sense: 21 00 00 00 [ 40.288626] sd 9:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 40.293926] sdc: sdc1 [ 40.296668] sd 9:0:0:1: [sdc] Attached SCSI removable disk [ 43.215851] EXT4-fs (dm-1): recovery complete [ 43.259670] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 46.872028] usb 9-4: USB disconnect, device number 3 [ 59.596685] Adding 8388604k swap on /dev/mapper/ubuntu-swap_1. Priority:-1 extents:1 across:8388604k [ 59.601809] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.631508] udevd[572]: starting version 175 [ 59.681066] lp: driver loaded but no devices found [ 59.693280] nvidia: module license 'NVIDIA' taints kernel. [ 59.693285] Disabling lock debugging due to kernel taint [ 59.717810] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 59.718505] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.09 Tue Dec 4 21:22:17 PST 2012 [ 59.749633] parport_pc 00:06: reported by Plug and Play ACPI [ 59.749688] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 59.760280] ACPI Warning: 0x0000000000000860-0x000000000000087f SystemIO conflicts with Region \_SB_.PCI0.GFX0.TCOI 1 (20120320/utaddress-251) [ 59.760287] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 59.760289] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 59.760292] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20120320/utaddress-251) [ 59.760295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 59.760297] ACPI Warning: 0x0000000000000480-0x00000000000004bf SystemIO conflicts with Region \GPR2 1 (20120320/utaddress-251) [ 59.760300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 59.760301] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 59.779392] type=1400 audit(1355739233.549:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=755 comm="apparmor_parser" [ 59.779716] type=1400 audit(1355739233.549:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=755 comm="apparmor_parser" [ 59.779900] type=1400 audit(1355739233.549:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=755 comm="apparmor_parser" [ 59.788465] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 59.809641] Linux video capture interface: v2.00 [ 59.809990] gspca_main: v2.14.0 registered [ 59.810245] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08da [ 59.814395] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 59.832100] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 59.832169] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 59.832228] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 59.832326] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 59.832391] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 59.832469] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 59.832540] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 59.832634] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 59.832908] hda_intel: Disabling MSI [ 59.832918] hda-intel: 0000:06:00.1: Handle VGA-switcheroo audio client [ 59.844125] lp0: using parport0 (interrupt-driven). [ 59.890985] ppdev: user-space parallel port driver [ 60.146294] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 60.314828] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 60.316116] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 60.317304] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 60.318409] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 60.720106] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:06:00.1/sound/card1/input13 [ 60.720186] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:06:00.1/sound/card1/input14 [ 60.720249] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:06:00.1/sound/card1/input15 [ 60.720312] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:06:00.1/sound/card1/input16 [ 60.901899] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/input/input17 [ 60.902134] usbcore: registered new interface driver gspca_zc3xx [ 60.905062] usbcore: registered new interface driver snd-usb-audio [ 61.018008] init: failsafe main process (1121) killed by TERM signal [ 61.131247] type=1400 audit(1355739234.901:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1195 comm="apparmor_parser" [ 61.131572] type=1400 audit(1355739234.901:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1194 comm="apparmor_parser" [ 61.131580] type=1400 audit(1355739234.901:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1195 comm="apparmor_parser" [ 61.131767] type=1400 audit(1355739234.901:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1195 comm="apparmor_parser" [ 61.131844] type=1400 audit(1355739234.901:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1194 comm="apparmor_parser" [ 61.132047] type=1400 audit(1355739234.905:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1192 comm="apparmor_parser" [ 61.132321] type=1400 audit(1355739234.905:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1192 comm="apparmor_parser" [ 61.161113] Bluetooth: Core ver 2.16 [ 61.161146] NET: Registered protocol family 31 [ 61.161148] Bluetooth: HCI device and connection manager initialized [ 61.161288] Bluetooth: HCI socket layer initialized [ 61.161290] Bluetooth: L2CAP socket layer initialized [ 61.161294] Bluetooth: SCO socket layer initialized [ 61.165235] Bluetooth: RFCOMM TTY layer initialized [ 61.165240] Bluetooth: RFCOMM socket layer initialized [ 61.165242] Bluetooth: RFCOMM ver 1.11 [ 61.176051] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 61.176054] Bluetooth: BNEP filters: protocol multicast [ 61.303719] r8169 0000:02:00.0: eth0: link down [ 61.303729] r8169 0000:02:00.0: eth0: link down [ 61.304546] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 61.304804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 63.281265] r8169 0000:02:00.0: eth0: link up [ 63.282024] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 72.832253] sd 9:0:0:0: Device offlined - not ready after error recovery [ 72.836536] sdc: detected capacity change from 4075290624 to 0 [ 73.031838] vboxdrv: Found 4 processor cores. [ 73.032021] vboxdrv: fAsync=0 offMin=0x208 offMax=0xa770 [ 73.032172] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 73.032173] vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004). [ 73.072628] init: udev-fallback-graphics main process (1989) terminated with status 1 [ 73.076598] usb 9-4: new SuperSpeed USB device number 4 using xhci_hcd [ 73.082377] init: lightdm main process (2005) killed by TERM signal [ 73.093084] usb 9-4: Parent hub missing LPM exit latency info. Power management will be impacted. [ 73.094670] usb 9-4: New USB device found, idVendor=05dc, idProduct=b049 [ 73.094672] usb 9-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 73.094674] usb 9-4: Product: USB_3_0 Reader [ 73.094675] usb 9-4: Manufacturer: Lexar [ 73.094677] usb 9-4: SerialNumber: 000000006358 [ 73.095410] scsi10 : usb-storage 9-4:1.0 [ 73.239058] vboxpci: IOMMU not found (not registered) [ 74.093672] scsi 10:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 74.094159] scsi 10:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 74.095955] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 74.096161] sd 10:0:0:1: Attached scsi generic sg3 type 0 [ 74.302473] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 74.302657] sd 10:0:0:1: [sdc] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB) [ 74.304171] sd 10:0:0:1: [sdc] Write Protect is off [ 74.304174] sd 10:0:0:1: [sdc] Mode Sense: 21 00 00 00 [ 74.305764] sd 10:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 74.311162] sdc: sdc1 [ 74.313130] sd 10:0:0:1: [sdc] Attached SCSI removable disk [ 76.995015] init: plymouth-stop pre-start process (2323) terminated with status 1 [ 111.960019] xhci_hcd 0000:03:00.0: Timeout while waiting for address device command [ 112.615918] xhci_hcd 0000:03:00.0: Stopped the command ring failed, maybe the host is dead [ 112.615918] xhci_hcd 0000:03:00.0: Abort command ring failed [ 122.234030] Clocksource tsc unstable (delta = 9373940553 ns) [ 122.234238] xhci_hcd 0000:03:00.0: HC died; cleaning up [ 122.234309] usb 8-1: USB disconnect, device number 2 [ 122.234436] Switching to clocksource acpi_pm [ 122.234528] usb 9-4: USB disconnect, device number 0 [ 122.236006] [sched_delayed] sched: RT throttling activated [ 122.640029] usb 9-4: device not accepting address 4, error -22 [ 122.640038] hub 9-0:1.0: cannot reset port 4 (err = -19) [ 122.640108] sd 10:0:0:0: Device offlined - not ready after error recovery root@andreas-linux-dt:~#
Der an die Karte angeschlossene Lexar Kartenleser mit den beiden eingesteckten Karten (1x SD 1xCF) sind gelistet!
[ 74.093672] scsi 10:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 74.094159] scsi 10:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5 [ 74.095955] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 74.096161] sd 10:0:0:1: Attached scsi generic sg3 type 0
Mit Win7 64 funktioniert die Karte einwandfrei!
Gruß
Andi