pccardctl info lsusb
fehlt noch. Offenbar keine PCI-Karte?!
Wlan
pccardctl info
PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Immer noch nix, mal ohne Filter
lspci -nnk
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7910] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel modules: ati-agp 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] Kernel modules: shpchp 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI Device [1002:7914] Kernel driver in use: pcieport Kernel modules: shpchp 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] Kernel driver in use: pcieport Kernel modules: shpchp 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA [1002:4380] Subsystem: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA [1002:4380] Kernel driver in use: ahci 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) [1002:4387] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) [1002:4388] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) [1002:4389] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) [1002:438a] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) [1002:438b] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) [1002:4386] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: piix4_smbus Kernel modules: sp5100_tco, i2c-piix4 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE [1002:438c] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge [1002:438d] Subsystem: Hewlett-Packard Company Device [103c:30c2] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS690M [Radeon X1200 Series] [1002:791f] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: radeon Kernel modules: radeon 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: tg3 Kernel modules: tg3
Nix 
Vielleicht ein Wackelkontakt oder kaputt?! Im BIOS nachgesehen, ob es dort aktiv(ierbar) ist?
Guten Morgen geomaster,
hast du eine Live CD von der 10.04 
Dann teste mit der, ob dort der Penal- Eintrag kommt. Achtung nicht installieren.
guten morgen...
Ja habe ich... ich glaub ich habe das Problem gefunden. Das Bios habe ich jetzt im original zustand zurück gesezt, jetzt wird im Reiter oben Funknetzwerke angezeigt. Aber es wird angezeigt das das Gerät nicht betriebsbereit ist das die Firmware fehlt.
was nu?
geomaster, du schreibst:
Aber es wird angezeigt, das das Gerät nicht betriebsbereit ist, das die Firmware fehlt.
Wo genau wird das angezeigt. Im Panal oder im BIOS?
Wenn es im Panel ist, kannst du ein Bild posten und was sagt
iwconfig
Hallo,
das BIOS zeigt eine fehlende Firmware nicht an.
Es dürfte sich um eine Broadcom-Karte handeln. Ob die Firmware benötigt wird oder ein anderer Treiber erforderlich ist kann man so nicht sagen, da die Angaben zur WLAN-Hardware ja bislang nicht gezeigt wurden bzw. werden konnten.
lspci -nnk
moin moin
so hab jetzt Ubuntu 11.10 drauf...der hat auch direkt den Wlan Treiber install.
jetzt geht wieder alles, obwohl ich ja lieber die 12.04 Version hätte... 
ist das jetzt richtig so?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11 Access Point: Not-Associated
Link Quality:5 Signal level:219 Noise level:164
Rx invalid nwid:0 invalid crypt:259 invalid misc:0
geomaster@geomaster-laptop:~$ lspci -nnk 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel modules: ati-agp 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] Kernel modules: shpchp 00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] Kernel driver in use: pcieport Kernel modules: shpchp 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] Kernel driver in use: pcieport Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] Kernel driver in use: ahci Kernel modules: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ohci_hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: piix4_smbus Kernel modules: sp5100_tco, i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Hewlett-Packard Company Device [103c:30c2] 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: radeon Kernel modules: radeon 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:30c2] Kernel driver in use: tg3 Kernel modules: tg3 30:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11a/b/g [14e4:4312] (rev 02) Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1371] Kernel driver in use: wl Kernel modules: wl, ssb
Danke für die Hilfe
Hallo geomaster,
wenn du 12.04 haben willst, vllt. kann dir hier speziell elektronenblitz63 helfen. Er hat mir auch schon bei dem Exoten von Medion geholfen. [Ps.: immer mit Erfolg, Grüße Rainer)
Möglicherweise funktioniert der 12.04-Treiber nicht auf den Kanälen 12 und 13 (Bug). Teste mal ne 12.04 Live-CD