lsmod | grep rt sagt folgendes:
rt2870sta 552712 0
rt2800usb 40800 0
rt2x00usb 13600 1 rt2800usb
rt2x00lib 34624 2 rt2800usb,rt2x00usb
led_class 5256 1 rt2x00lib
input_polldev 4720 1 rt2x00lib
mac80211 210104 2 begin_of_the_skype_highlighting 0211 210104 2 end_of_the_skype_highlighting rt2x00usb,rt2x00lib
cfg80211 109144 2 rt2x00lib,mac80211
crc_ccitt 2336 1 rt2800usb
parport_pc 37352 1
parport 40528 3 lp,ppdev,parport_pc
dmesg| grep rt sagt das:
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Checking aperture...
[ 0.000000] Node 0: aperture @ 96000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.018959] mce: CPU supports 5 MCE banks
[ 0.140000] Booting paravirtualized kernel on bare hardware
[ 0.140000] node 0 link 0: io port [9000, ffff]
[ 0.140000] bus: 00 index 0 io port: [0, ffff]
[ 0.144357] ACPI: (supports S0 S1 S4 S5)
[ 0.152741] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff1f]
[ 0.152749] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.152753] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.152762] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.152801] pci 0000:00:02.0: supports D1 D2
[ 0.152802] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152842] pci 0000:00:02.1: supports D1 D2
[ 0.152844] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152868] pci 0000:00:04.0: reg 10 io port: [0xea00-0xeaff]
[ 0.152871] pci 0000:00:04.0: reg 14 io port: [0xee00-0xeeff]
[ 0.152888] pci 0000:00:04.0: supports D1 D2
[ 0.152908] pci 0000:00:06.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.152931] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.152934] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.152938] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
[ 0.152941] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
[ 0.152945] pci 0000:00:07.0: reg 20 io port: [0xf600-0xf60f]
[ 0.152970] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.152973] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.152976] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.152980] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.152983] pci 0000:00:08.0: reg 20 io port: [0xf100-0xf10f]
[ 0.153023] pci 0000:00:0a.0: reg 14 io port: [0xf000-0xf007]
[ 0.153037] pci 0000:00:0a.0: supports D1 D2
[ 0.153039] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153068] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153098] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153127] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153156] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153289] pci 0000:01:09.0: supports D2
[ 0.153291] pci 0000:01:09.0: PME# supported from D2 D3hot D3cold
[ 0.153324] pci 0000:01:0c.0: reg 14 io port: [0xdf00-0xdf7f]
[ 0.153349] pci 0000:01:0c.0: supports D2
[ 0.153351] pci 0000:01:0c.0: PME# supported from D2 D3hot D3cold
[ 0.153376] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.153413] pci 0000:00:0b.0: bridge io port: [0xc000-0xcfff]
[ 0.153451] pci 0000:00:0c.0: bridge io port: [0xb000-0xbfff]
[ 0.153489] pci 0000:00:0d.0: bridge io port: [0xa000-0xafff]
[ 0.153535] pci 0000:05:00.0: reg 24 io port: [0x9f00-0x9f7f]
[ 0.153585] pci 0000:00:0e.0: bridge io port: [0x9000-0x9fff]
[ 0.222819] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.222822] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.222824] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.222827] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.222830] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.222832] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.222837] system 00:02: ioport range 0xb78-0xb7b has been reserved
[ 0.222840] system 00:02: ioport range 0xf78-0xf7b has been reserved
[ 0.222843] system 00:02: ioport range 0xa78-0xa7b has been reserved
[ 0.222845] system 00:02: ioport range 0xe78-0xe7b has been reserved
[ 0.222848] system 00:02: ioport range 0xbbc-0xbbf has been reserved
[ 0.222850] system 00:02: ioport range 0xfbc-0xfbf has been reserved
[ 0.222853] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.222856] system 00:02: ioport range 0x290-0x30f has been reserved
[ 1.710390] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 1.710395] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.710489] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 1.710492] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.710582] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 1.710586] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.710673] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 1.710677] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.716162] Linux agpgart interface v0.103
[ 1.716175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.717899] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.722326] ehci_hcd 0000:00:02.1: debug port 1
[ 1.722329] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.740016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.740154] hub 1-0:1.0: 10 ports detected
[ 1.802105] hub 2-0:1.0: 10 ports detected
[ 1.804707] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.804713] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.804859] rtc_cmos 00:04: RTC can wake from S4
[ 1.804902] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.804924] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.811439] rtc_cmos 00:04: setting system clock to 2010-02-20 21:10:17 UTC (1266700217)
[ 1.920045] ata5.01: both IDENTIFYs aborted, assuming NODEV
[ 1.981826] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.674764] USB Mass Storage support registered.
[ 5.182039] kjournald2 starting: pid 502, dev sda7:8, commit interval 5 seconds
[ 5.321321] kjournald2 starting: pid 512, dev sda8:8, commit interval 5 seconds
[ 93.748386] udev: starting version 147
[ 97.167205] parport_pc 00:09: reported by Plug and Play ACPI
[ 97.167253] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 97.525713] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 98.259777] ppdev: user-space parallel port driver
[ 100.512761] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 101.399642] Registered led device: rt2800usb-phy0::radio
[ 101.399660] Registered led device: rt2800usb-phy0::assoc
[ 101.399676] Registered led device: rt2800usb-phy0::quality
[ 101.410539] usbcore: registered new interface driver rt2800usb
[ 101.928562] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 101.946048] rtusb init --->
[ 101.946104] usbcore: registered new interface driver rt2870
[ 102.426657] rt3070sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 102.438747] rtusb init --->
[ 102.438756] Error: Driver 'rt2870' is already registered, aborting...
[ 102.438761] usbcore: error -17 registering interface driver rt2870
[ 103.031292] rt2800usb 1-1:1.0: firmware: requesting rt2870.bin
[ 106.434828] lp0: using parport0 (interrupt-driven).
[ 270.129063] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1004 with error -19.
[ 270.129069] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1004 with error -19.
[ 270.129073] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0208 with error -19.
[ 270.129076] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0208 with error -19.
[ 270.129079] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1004 with error -19.
[ 270.129083] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1204 with error -19.
[ 270.129086] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1328 with error -19.
[ 270.129090] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0208 with error -19.
[ 270.129093] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 270.129098] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129202] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129306] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129409] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129512] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129615] phy0 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffff8800
[ 270.129620] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129623] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x7010 with error -19.
[ 270.129627] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -19.
[ 270.129717] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129821] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.129924] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.137810] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.137918] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138021] phy0 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 270.138098] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138202] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138305] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138409] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138512] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138615] phy0 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 270.138653] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138756] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138859] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.138963] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.139066] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 270.139169] phy0 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 282.453791] Registered led device: rt2800usb-phy1::radio
[ 282.453807] Registered led device: rt2800usb-phy1::assoc
[ 282.453826] Registered led device: rt2800usb-phy1::quality
[ 282.509375] rt2800usb 1-1:1.0: firmware: requesting rt2870.bin
[ 595.165495] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1004 with error -19.
[ 595.165500] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1004 with error -19.
[ 595.165504] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0208 with error -19.
[ 595.165507] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0208 with error -19.
[ 595.165511] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1004 with error -19.
[ 595.165514] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1204 with error -19.
[ 595.165517] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1328 with error -19.
[ 595.165521] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0208 with error -19.
[ 595.165524] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 595.165530] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.165633] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.165737] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.165840] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.165943] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166047] phy1 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffff8800
[ 595.166051] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166055] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x7010 with error -19.
[ 595.166058] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -19.
[ 595.166143] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166246] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166350] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166453] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166556] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166660] phy1 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 595.166683] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166786] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166890] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.166993] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167097] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167200] phy1 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 595.167226] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167329] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167433] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167536] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167639] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19.
[ 595.167742] phy1 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffffff
[ 608.633816] Registered led device: rt2800usb-phy2::radio
[ 608.633833] Registered led device: rt2800usb-phy2::assoc
[ 608.633852] Registered led device: rt2800usb-phy2::quality
[ 608.657622] rt2800usb 1-1:1.0: firmware: requesting rt2870.bin
und iwconfig das:
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=9 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0