|
blackXTC
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
1. Oktober 2008 21:21
Hallo, ich beschäftige mich seit ein paar Wochen mit Ubuntu (Hardy Heron 8.04) und konnte bisher fast alle Probleme mit dem Wiki bzw. der Forensuche lösen, nur jetz kommen ich einfach nicht mehr weiter. Mir ist es gelungen eine WLAN-Verbindung mit WPA-PSK Verschlüsselung aufzubauen,
das Problem ist, sie bricht ca. 30 Min. nach Starten des Rechners ab und nach manuellem Wiederaufau
bricht sie alle paar Minuten erneut ab. Unter Vista ist mir die Verbindung damit noch nie abgebrochen.
Ich stelle die Verbindung wieder her durch neustaren der Netzwerkkarte mit
"sudo ifdown wlan0"
"sudo ifup wlan0"
und
"sudo dhclient wlan0"
,manchmal reicht auch nur letzteres. Mein Notebook (Fujitsu-Siemens Pa2845) hat den internen WLAN-Adaper "SiS163u", der läuft jetz mit nem Win98-Teiber (NidsWrapper), weil der XP-Treiber nicht funktionierte und laut Aussage eines Forenmitgliedes der Vista-Treiber
auch nicht läuft.
Zur Konfiguration verwende ich WPA-Supplicant, da mit Wicd die Verschlüsselung nicht funktionierte. Hat jemand von euch mit diesem Adapter schon ne stabile Verbindung hinbekommen, wenn ja wie?
Gibt es vieleicht noch einen anderen Treiber den ich ausprobieren könnte, bzw. kann man die Verbindugnswiederherstellung automatisieren?
Ich habs auch schon mit ner festen IP versucht, aber nach Abbruch konnte ich die Verbindung dann garnicht mehr herstellen. Vielen Dank schon mal im Voraus! MfG Stefan
|
|
elektronenblitz63
Supporter
Anmeldungsdatum:
Jan. 16, 2007
Beiträge: 17871
Wohnort: NRW
|
3. Oktober 2008 16:40
Hallo,
schwer zu sagen woran das liegt, da der Treiber ja grundsätzlich funktioniert. Möglicherweise arbeitet der Treiber unter Linux anders als unter Windows und die Karte überhitzt. Das würde erklären warum der Fehler erst nach ca. 30 Minuten auftritt. Wenn es soweit ist, schalte den Rechner mal für ca. fünf Minuten ab und kontrolliere anschließend wie lange es dauert bis der Fehler wieder auftritt. Packe die beiden Windows-Treiberdateien (*.sys und *.inf) mal in ein tar-Archiv und hänge dies hier an. Was zeigt ein Scan?
iwlist scan und die Ausgabe von
lsusb
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
6. Oktober 2008 19:18
Ich glaube nicht, dass das ein Hitzeproblem ist. Habe gerade den PC eingeschaltet,dann gings nach ca.15 Min nicht mehr (lies sich mit den zuvor genannten Befehlen wieder aktivieren) und ich hab ihn 5 Min ausgeschaltet. Nach dem Booten gigs sofort wieder, aber nur für ein paar Minuten. Es kann auch sein, dass es nach dem "Reaktivieren" bis zu einer halben Stunde oder länger gut geht. Den Treiber, den ich verwende, hast du in folgendem Topic zur Verfügung gestellt, dort habe ich ihn runtergeladen.
http://forum.ubuntuusers.de/topic/w-lan-karte-unter-ununtu-8.04-nicht-erkannt-c/#post-1410519
Habe trotzem die beiden Files aus /etc/ndiswrapper/sis163u_w98mod angehängt. Ausgabe von 'iwlist scan' lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:01:E3:50:C6:78
ESSID:"GigasetSX541"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality:64/100 Signal level:-55 dBm Noise level:-96 dBm
Encryption key:on
Bit Rates:54 Mb/s; 48 Mb/s; 36 Mb/s; 24 Mb/s; 22 Mb/s
18 Mb/s; 12 Mb/s; 11 Mb/s; 9 Mb/s; 6 Mb/s
5.5 Mb/s; 2 Mb/s; 1 Mb/s
Extra:bcn_int=100
Extra:atim=0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Ausgabe von 'lsusb' Bus 004 Device 003: ID 0402:5602 ALi Corp. Video Camera Controller
Bus 004 Device 002: ID 0bf8:100f Fujitsu Siemens Computers (müsste die Karte sein)
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0bda:0158 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 046a:0033 Cherry GmbH
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
- sis163u_w98mod.tar (0.2 KiB)
- sis163u_w98mod.tar herunterladen
|
|
elektronenblitz63
Supporter
Anmeldungsdatum:
Jan. 16, 2007
Beiträge: 17871
Wohnort: NRW
|
6. Oktober 2008 20:35
Im Paket ist ja auch noch der Treiber für XP. Schon getestet?
Bus 004 Device 003: ID 0402:5602 ALi Corp. Video Camera Controller
Ist das die eingebaute Kamera, oder ein ext. Zusatzgerät? Wenn es eine ext. Kamera ist, bitte mal an einen anderen USB-Port anschließen und mit lsusb prüfen. Es sollte nicht an diesem Anschluß sein "Bus 004 ...".
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
6. Oktober 2008 21:51
Das ist die eingebaute Kamera (Bus 004 Device 003: ID 0402:5602 ALi Corp. Video Camera Controller). Mit dem XP Treiber funktionierts nicht, das habe ich schon mehrfach versucht (andreren Treiber natürlich vorher deinstalliert). Wenn der installiert ist erscheint die Karte bei 'iwlist scan' und 'iwconfig' garnicht mehr.
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
7. Oktober 2008 20:17
Der Treiber von dir läuft zwar, das Problem besteht aber weiterhin.
Ich habe den Teiber installiert und den Rechner neugestartet, dann das WLAN ca. 5 Min funktioniert,
nach reaktivieren durch "sudo dhclient wlan" hat es ca. 1,5h funktioniert.
Wenigstens brichts jetz nicht mehr nach ganz so kurzer Zeit ab.
|
|
elektronenblitz63
Supporter
Anmeldungsdatum:
Jan. 16, 2007
Beiträge: 17871
Wohnort: NRW
|
7. Oktober 2008 20:40
Durchsuche bitte mal die Log-Dateien nach Meldungen zur WLAN-Schnittstelle, oder hänge diese hier einfach an:
cat /var/log/messages | grep ndis > mes_ndis.txt
cat /var/log/messages | grep wlan0 > messages.txt Mal schauen ob ein brauchbarer Hinweis dabei ist.
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
7. Oktober 2008 20:56
Wenn ich die Befehle von dir eingebe passiert nichts. Ich kann die Datei mes_ndis.txt nicht finden. /var/log/messages.txt
Oct 7 18:09:19 Stefan-Notebook syslogd 1.5.0#1ubuntu1: restart.
Oct 7 18:18:01 Stefan-Notebook kernel: [ 547.026525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 7 18:18:02 Stefan-Notebook kernel: [ 547.156121] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 7 18:39:09 Stefan-Notebook -- MARK --
Oct 7 18:59:10 Stefan-Notebook -- MARK --
Oct 7 19:19:10 Stefan-Notebook -- MARK --
Oct 7 19:39:10 Stefan-Notebook -- MARK --
Oct 7 19:59:10 Stefan-Notebook -- MARK --
Oct 7 20:19:10 Stefan-Notebook -- MARK --
Oct 7 20:39:10 Stefan-Notebook -- MARK --
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
7. Oktober 2008 21:25
~/home/[user]/mes_ndis.txt ist komplett leer.
~/home/[user]/messages.txt
Oct 7 18:18:01 Stefan-Notebook kernel: [ 547.026525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 7 18:18:02 Stefan-Notebook kernel: [ 547.156121] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Gerade gings schon wieder nicht, musste erst wieder "sudo dhclient wlan0" eingeben. Habs auch schon mit fester IP-Konfiguration versucht, hat auch nix gebracht.
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
7. Oktober 2008 22:14
dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff50000 (usable)
[ 0.000000] BIOS-e820: 00000000bff50000 - 00000000bff61000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff61000 - 00000000bff62000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff62000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 2175MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8080
[ 0.000000] Entering add_active_range(0, 0, 786256) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786256
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786256
[ 0.000000] On node 0 totalpages: 786256
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4350 pages used for memmap
[ 0.000000] HighMem zone: 552530 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F80F0 checksum 0
[ 0.000000] ACPI: RSDP 000F80F0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT BFF5BCA7, 0074 (r1 FSC PC 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFF60874, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT BFF5BD1B, 4AE5 (r1 FIC PTT50 6040000 MSFT 3000001)
[ 0.000000] ACPI: FACS BFF61FC0, 0040
[ 0.000000] ACPI: SLIC BFF60968, 0176 (r1 FSC PC 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA BFF60ADE, 0032 (r1 Phoeni x 6040000 TL 0)
[ 0.000000] ACPI: SRAT BFF60B10, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: WDAT BFF60BB0, 0104 (r1 PTLTD WDATTBL 6040000 LTP 1)
[ 0.000000] ACPI: SSDT BFF60CB4, 0248 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: MCFG BFF60EFC, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET BFF60F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC BFF60F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT BFF60FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780114
[ 0.000000] Kernel command line: root=UUID=7a6c3083-43a4-4997-be7d-cd82462a72aa ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.178 MHz processor.
[ 15.006186] spurious 8259A interrupt: IRQ7.
[ 15.008785] Console: colour VGA+ 80x25
[ 15.008788] console [tty0] enabled
[ 15.009140] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.009530] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.170897] Memory: 3106408k/3145024k available (2177k kernel code, 37328k reserved, 1006k data, 368k init, 2227520k highmem)
[ 15.170904] virtual kernel memory layout:
[ 15.170905] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.170907] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.170908] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.170909] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.170910] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 15.170911] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 15.170912] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 15.170915] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.170951] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 15.171086] hpet clockevent registered
[ 15.250942] Calibrating delay using timer specific routine.. 4004.50 BogoMIPS (lpj=8009007)
[ 15.250964] Security Framework initialized
[ 15.250970] SELinux: Disabled at boot.
[ 15.250985] AppArmor: AppArmor initialized
[ 15.250988] Failure registering capabilities with primary security module.
[ 15.250996] Mount-cache hash table entries: 512
[ 15.251109] Initializing cgroup subsys ns
[ 15.251113] Initializing cgroup subsys cpuacct
[ 15.251123] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000
[ 15.251131] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.251133] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.251136] CPU 0(2) -> Core 0
[ 15.251138] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000
[ 15.251147] Compat vDSO mapped to ffffe000.
[ 15.251158] Checking 'hlt' instruction... OK.
[ 15.267195] SMP alternatives: switching to UP code
[ 15.268396] Early unpacking initramfs... done
[ 15.588561] ACPI: Core revision 20070126
[ 15.588613] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.033188] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 01
[ 16.033205] SMP alternatives: switching to SMP code
[ 16.033656] Booting processor 1/1 eip 3000
[ 16.042875] Initializing CPU#1
[ 16.120534] Calibrating delay using timer specific routine.. 4000.41 BogoMIPS (lpj=8000828)
[ 16.120541] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000
[ 16.120547] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.120549] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.120551] CPU 1(2) -> Core 1
[ 16.120553] AMD C1E detected late. Force timer broadcast.
[ 16.120554] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000
[ 16.121532] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 01
[ 16.121549] Total of 2 processors activated (8004.91 BogoMIPS).
[ 16.121786] ENABLING IO-APIC IRQs
[ 16.122019] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.161792] Brought up 2 CPUs
[ 16.161840] CPU0 attaching sched-domain:
[ 16.161842] domain 0: span 03
[ 16.161844] groups: 01 02
[ 16.161846] CPU1 attaching sched-domain:
[ 16.161848] domain 0: span 03
[ 16.161850] groups: 02 01
[ 16.162040] net_namespace: 64 bytes
[ 16.162047] Booting paravirtualized kernel on bare hardware
[ 16.162485] Time: 17:58:47 Date: 10/07/08
[ 16.162510] NET: Registered protocol family 16
[ 16.162689] EISA bus registered
[ 16.162693] ACPI: bus type pci registered
[ 16.170982] PCI: PCI BIOS revision 3.00 entry at 0xfddc1, last bus=9
[ 16.170984] PCI: Using configuration type 1
[ 16.170991] Setting up standard PCI resources
[ 16.172426] ACPI: EC: Look up EC in DSDT
[ 16.174406] ACPI: Interpreter enabled
[ 16.174409] ACPI: (supports S0 S3 S4 S5)
[ 16.174419] ACPI: Using IOAPIC for interrupt routing
[ 16.179355] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 16.179357] ACPI: EC: driver started in poll mode
[ 16.179399] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.180066] PCI: Transparent bridge - 0000:00:08.0
[ 16.180324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.180390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 16.180446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 16.180470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 16.180494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 16.199837] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 16.199988] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 16.200136] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 16.200282] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 16.200429] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 16.200577] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.200725] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 16.200873] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 16.201020] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.201167] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *7
[ 16.201314] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *5
[ 16.201461] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
[ 16.201623] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.201775] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 16.201924] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 16.202072] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.202219] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.202367] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.202514] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10
[ 16.202632] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.202659] pnp: PnP ACPI init
[ 16.202666] ACPI: bus type pnp registered
[ 16.204784] pnp: PnP ACPI: found 12 devices
[ 16.204786] ACPI: ACPI bus type pnp unregistered
[ 16.204789] PnPBIOS: Disabled by ACPI PNP
[ 16.204993] PCI: Using ACPI for IRQ routing
[ 16.204996] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.237556] NET: Registered protocol family 8
[ 16.237558] NET: Registered protocol family 20
[ 16.237588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 16.237592] hpet0: 3 32-bit timers, 25000000 Hz
[ 16.238632] AppArmor: AppArmor Filesystem Enabled
[ 16.241542] Time: hpet clocksource has been installed.
[ 16.241545] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 16.241548] Could not switch to high resolution mode on CPU 0
[ 16.244759] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 16.244766] Could not switch to high resolution mode on CPU 1
[ 16.249564] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 16.249569] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 16.249572] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 16.249574] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 16.249577] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 16.249580] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 16.249583] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 16.249585] system 00:03: ioport range 0x3040-0x307f has been reserved
[ 16.249588] system 00:03: ioport range 0x3000-0x303f has been reserved
[ 16.249593] system 00:04: ioport range 0x360-0x361 has been reserved
[ 16.249595] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 16.249604] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
[ 16.249607] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 16.249610] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 16.249613] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 16.249615] system 00:0b: iomem range 0xfec80000-0xfec80fff has been reserved
[ 16.249618] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 16.279957] PCI: Bridge: 0000:00:08.0
[ 16.279959] IO window: disabled.
[ 16.279962] MEM window: disabled.
[ 16.279964] PREFETCH window: disabled.
[ 16.279970] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:02:00.0
[ 16.279972] PCI: Bridge: 0000:00:0b.0
[ 16.279974] IO window: 4000-4fff
[ 16.279976] MEM window: cc000000-ceffffff
[ 16.279979] PREFETCH window: d0000000-dfffffff
[ 16.279981] PCI: Bridge: 0000:00:0c.0
[ 16.279982] IO window: disabled.
[ 16.279984] MEM window: disabled.
[ 16.279986] PREFETCH window: disabled.
[ 16.279988] PCI: Bridge: 0000:00:0d.0
[ 16.279990] IO window: 5000-5fff
[ 16.279993] MEM window: f0200000-f03fffff
[ 16.279995] PREFETCH window: f0000000-f01fffff
[ 16.280005] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 16.280014] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 16.280021] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 16.280028] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 16.280039] NET: Registered protocol family 2
[ 16.329452] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.329729] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.330564] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.330996] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.330999] TCP reno registered
[ 16.341493] checking if image is initramfs... it is
[ 16.960904] Freeing initrd memory: 7731k freed
[ 16.961043] Simple Boot Flag at 0x36 set to 0x1
[ 16.960911] audit: initializing netlink socket (disabled)
[ 16.960923] audit(1223402326.352:1): initialized
[ 16.961123] highmem bounce pool size: 64 pages
[ 16.962935] VFS: Disk quotas dquot_6.5.1
[ 16.963000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.963110] io scheduler noop registered
[ 16.963112] io scheduler anticipatory registered
[ 16.963114] io scheduler deadline registered
[ 16.963123] io scheduler cfq registered (default)
[ 16.963151] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 16.963277] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 16.963290] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 16.963305] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 16.963320] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 16.963333] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 16.963347] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 16.963361] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 16.963398] Boot video device is 0000:02:00.0
[ 16.963494] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 16.963516] assign_interrupt_mode Found MSI capability
[ 16.963535] Allocate Port Service[0000:00:0b.0:pcie00]
[ 16.963598] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 16.963619] assign_interrupt_mode Found MSI capability
[ 16.963634] Allocate Port Service[0000:00:0c.0:pcie00]
[ 16.963690] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 16.963711] assign_interrupt_mode Found MSI capability
[ 16.963725] Allocate Port Service[0000:00:0d.0:pcie00]
[ 16.963935] isapnp: Scanning for PnP cards...
[ 17.316164] isapnp: No Plug & Play device found
[ 17.343965] Real Time Clock Driver v1.12ac
[ 17.344148] hpet_resources: 0xfed00000 is busy
[ 17.344184] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.345291] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.345352] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.345443] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 17.349958] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.350866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.350871] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.350875] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.350877] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.350879] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.366700] mice: PS/2 mouse device common for all mice
[ 17.366821] EISA: Probing bus 0 at eisa.0
[ 17.366826] Cannot allocate resource for EISA slot 1
[ 17.366831] Cannot allocate resource for EISA slot 3
[ 17.366833] Cannot allocate resource for EISA slot 4
[ 17.366835] Cannot allocate resource for EISA slot 5
[ 17.366844] EISA: Detected 0 cards.
[ 17.366847] cpuidle: using governor ladder
[ 17.366849] cpuidle: using governor menu
[ 17.366932] NET: Registered protocol family 1
[ 17.366954] Using IPI No-Shortcut mode
[ 17.366986] registered taskstats version 1
[ 17.367097] Magic number: 12:794:996
[ 17.367106] hash matches device ttyd9
[ 17.367116] hash matches device ttyac
[ 17.367265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.367267] EDD information not available.
[ 17.367513] Freeing unused kernel memory: 368k freed
[ 17.394771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.644349] fuse init (API version 7.9)
[ 18.669981] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 18.669993] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 18.673652] ACPI: Thermal Zone [THRM] (64 C)
[ 19.076006] usbcore: registered new interface driver usbfs
[ 19.076028] usbcore: registered new interface driver hub
[ 19.075724] usbcore: registered new device driver usb
[ 19.077706] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 19.077717] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, low) -> IRQ 16
[ 19.077728] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 19.077731] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 19.077966] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 19.077993] ehci_hcd 0000:00:02.1: debug port 1
[ 19.077997] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 19.078010] ehci_hcd 0000:00:02.1: irq 16, io mem 0xf0689000
[ 19.079449] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.090645] SCSI subsystem initialized
[ 19.096599] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.096717] usb usb1: configuration #1 chosen from 1 choice
[ 19.096739] hub 1-0:1.0: USB hub found
[ 19.096746] hub 1-0:1.0: 6 ports detected
[ 19.136404] libata version 3.00 loaded.
[ 19.203513] ACPI: PCI Interrupt Link [Z004] enabled at IRQ 22
[ 19.203524] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z004] -> GSI 22 (level, low) -> IRQ 17
[ 19.203536] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 19.203539] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 19.203561] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 19.203590] ehci_hcd 0000:00:04.1: debug port 1
[ 19.203594] PCI: cache line size of 64 is not supported by device 0000:00:04.1
[ 19.203604] ehci_hcd 0000:00:04.1: irq 17, io mem 0xf0689400
[ 19.219138] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.219264] usb usb2: configuration #1 chosen from 1 choice
[ 19.219288] hub 2-0:1.0: USB hub found
[ 19.219294] hub 2-0:1.0: 6 ports detected
[ 19.323476] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 19.323487] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 18
[ 19.323499] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 19.323502] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 19.323526] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 19.323541] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf0686000
[ 19.381742] usb usb3: configuration #1 chosen from 1 choice
[ 19.381766] hub 3-0:1.0: USB hub found
[ 19.381774] hub 3-0:1.0: 6 ports detected
[ 19.450697] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 19.483828] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 20
[ 19.483839] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z003] -> GSI 20 (level, low) -> IRQ 19
[ 19.483851] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 19.483855] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 19.483878] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 19.483894] ohci_hcd 0000:00:04.0: irq 19, io mem 0xf0687000
[ 19.541437] usb usb4: configuration #1 chosen from 1 choice
[ 19.541463] hub 4-0:1.0: USB hub found
[ 19.541470] hub 4-0:1.0: 6 ports detected
[ 19.614217] usb 1-2: configuration #1 chosen from 1 choice
[ 19.642471] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 19.642527] ahci 0000:00:09.0: version 3.0
[ 19.642786] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
[ 19.642795] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 19 (level, low) -> IRQ 20
[ 19.861906] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 20.002571] usb 2-1: configuration #1 chosen from 1 choice
[ 20.245173] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 20.401182] usb 2-2: configuration #1 chosen from 1 choice
[ 20.648410] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 20.648415] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 20.648420] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 20.648745] scsi0 : ahci
[ 20.649023] scsi1 : ahci
[ 20.649169] scsi2 : ahci
[ 20.649320] scsi3 : ahci
[ 20.649394] ata1: SATA max UDMA/133 abar m8192@0xf0684000 port 0xf0684100 irq 220
[ 20.649397] ata2: SATA max UDMA/133 abar m8192@0xf0684000 port 0xf0684180 irq 220
[ 20.649400] ata3: SATA max UDMA/133 abar m8192@0xf0684000 port 0xf0684200 irq 220
[ 20.649403] ata4: SATA max UDMA/133 abar m8192@0xf0684000 port 0xf0684280 irq 220
[ 20.899931] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 21.109659] usb 4-3: configuration #1 chosen from 1 choice
[ 21.112659] usbcore: registered new interface driver libusual
[ 21.119197] Initializing USB Mass Storage driver...
[ 21.120040] scsi4 : SCSI emulation for USB Mass Storage devices
[ 21.120688] usbcore: registered new interface driver usb-storage
[ 21.120691] USB Mass Storage support registered.
[ 21.119984] usb-storage: device found at 2
[ 21.119987] usb-storage: waiting for device to settle before scanning
[ 21.299184] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.347147] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 21.347150] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.348030] ata1.00: configured for UDMA/133
[ 21.666492] ata2: SATA link down (SStatus 0 SControl 300)
[ 21.985893] ata3: SATA link down (SStatus 0 SControl 300)
[ 22.313280] ata4: SATA link down (SStatus 0 SControl 300)
[ 22.313373] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 22.314397] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 22.314673] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 18
[ 22.314682] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 18 (level, low) -> IRQ 21
[ 22.314687] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 22.323960] Driver 'sd' needs updating - please use bus_type methods
[ 22.324039] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.324050] sd 0:0:0:0: [sda] Write Protect is off
[ 22.324053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.324068] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.324108] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.324115] sd 0:0:0:0: [sda] Write Protect is off
[ 22.324118] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.324130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.324133] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 22.409605] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.415487] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.832753] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:14:0b:46:af:9d
[ 22.832758] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[ 22.837381] pata_amd 0000:00:06.0: version 0.3.10
[ 22.837429] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 22.837480] scsi5 : pata_amd
[ 22.837527] scsi6 : pata_amd
[ 22.837802] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 22.837805] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 22.874287] usbcore: registered new interface driver hiddev
[ 22.880430] input: PRIMAX Cherry USB Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input2
[ 22.908215] input,hidraw0: USB HID v1.00 Mouse [PRIMAX Cherry USB Mouse] on usb-0000:00:04.0-3
[ 22.908228] usbcore: registered new interface driver usbhid
[ 22.908231] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 23.160011] ata5.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
[ 23.335645] ata5.00: configured for UDMA/33
[ 23.335695] ata6: port disabled. ignoring.
[ 23.336768] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
[ 23.336840] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 23.343893] Driver 'sr' needs updating - please use bus_type methods
[ 23.347858] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.347862] Uniform CD-ROM driver Revision: 3.20
[ 23.347901] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 23.457805] Attempting manual resume
[ 23.457809] swsusp: Resume From Partition 8:3
[ 23.457811] PM: Checking swsusp image.
[ 23.457949] PM: Resume from disk failed.
[ 23.519584] kjournald starting. Commit interval 5 seconds
[ 23.519595] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.114367] usb-storage: device scan complete
[ 26.121106] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 26.125106] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 26.125136] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 31.641996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.679681] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.696176] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 31.851456] input: Power Button (FF) as /devices/virtual/input/input4
[ 31.875227] ACPI: Power Button (FF) [PWRF]
[ 31.875339] input: Power Button (CM) as /devices/virtual/input/input5
[ 31.907162] ACPI: Power Button (CM) [PWRB]
[ 31.907242] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 31.939100] ACPI: Sleep Button (CM) [SLPB]
[ 31.939186] input: Lid Switch as /devices/virtual/input/input7
[ 31.939240] ACPI: Lid Switch [LID]
[ 32.687811] ACPI: AC Adapter [ACAD] (on-line)
[ 32.703171] eth0: no link during initialization.
[ 32.864944] ACPI: Battery Slot [BAT0] (battery present)
[ 33.041425] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 33.041436] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 17 (level, low) -> IRQ 22
[ 33.041459] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 33.053695] Linux agpgart interface v0.102
[ 33.079754] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 33.192359] nvidia: module license 'NVIDIA' taints kernel.
[ 33.461817] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 33.461230] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 16
[ 33.461241] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LK2E] -> GSI 16 (level, low) -> IRQ 23
[ 33.461251] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 33.461689] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 33.637958] NET: Registered protocol family 10
[ 33.638156] lo: Disabled Privacy Extensions
[ 33.638587] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.679104] input: PS/2 Mouse as /devices/virtual/input/input8
[ 33.735755] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[ 33.744127] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 33.903764] ndiswrapper: driver sis163u32m1 (,11/02/2005,5.0.1039.1050) loaded
[ 34.328226] wlan0: ethernet device 00:30:05:db:88:db using NDIS driver: sis163u32m1, version: 0x1000000, NDIS version: 0x500, vendor: 'NDIS Network Adapter', 0BF8:100F.F.conf
[ 34.329397] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 34.332284] usbcore: registered new interface driver ndiswrapper
[ 34.748802] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.083649] lp: driver loaded but no devices found
[ 35.133136] NET: Registered protocol family 17
[ 35.226805] Adding 2996112k swap on /dev/sda3. Priority:-1 extents:1 across:2996112k
[ 35.775959] EXT3 FS on sda7, internal journal
[ 35.940074] device-mapper: uevent: version 1.0.3
[ 35.940105] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 37.425907] kjournald starting. Commit interval 5 seconds
[ 37.426957] EXT3 FS on sda6, internal journal
[ 37.426965] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.018725] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.371821] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.521288] No dock devices found.
[ 38.820514] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00)
[ 38.821358] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x12
[ 38.821362] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x13
[ 38.821365] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x14
[ 38.821368] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x15
[ 38.821370] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e
[ 39.756513] apm: BIOS not found.
[ 39.900398] ppdev: user-space parallel port driver
[ 40.091024] audit(1223395150.082:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5477 profile="/usr/sbin/cupsd" namespace="default"
[ 42.245449] Clocksource tsc unstable (delta = -165611679 ns)
[ 42.254812] Bluetooth: Core ver 2.11
[ 42.254883] NET: Registered protocol family 31
[ 42.254885] Bluetooth: HCI device and connection manager initialized
[ 42.254888] Bluetooth: HCI socket layer initialized
[ 42.272393] Bluetooth: L2CAP ver 2.9
[ 42.272399] Bluetooth: L2CAP socket layer initialized
[ 42.288694] Bluetooth: RFCOMM socket layer initialized
[ 42.288711] Bluetooth: RFCOMM TTY layer initialized
[ 42.288713] Bluetooth: RFCOMM ver 1.8
[ 46.437891] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.615832] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.730300] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.672155] wlan0: no IPv6 routers present
[ 62.726318] CPU0 attaching NULL sched-domain.
[ 62.726327] CPU1 attaching NULL sched-domain.
[ 62.747984] CPU0 attaching sched-domain:
[ 62.747992] domain 0: span 03
[ 62.747995] groups: 01 02
[ 62.747999] CPU1 attaching sched-domain:
[ 62.748001] domain 0: span 03
[ 62.748003] groups: 02 01
[ 547.026525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.156121] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 551.197738] wlan0: no IPv6 routers present
|
|
elektronenblitz63
Supporter
Anmeldungsdatum:
Jan. 16, 2007
Beiträge: 17871
Wohnort: NRW
|
7. Oktober 2008 22:38
Ein Fehler mit dem ACPI-System. Ob das auch mit dem WLAN zusammenhängt, kann ich nicht sagen. [ 15.588613] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Siehe dazu acpi-fix. Kein Fehler mit dem Treiber zu sehen. Ich glaube nicht, dass es daran liegt. Die letzten erfolgreichen Installtionen (Amilo/SIS) bezogen sich alle auf 64Bit-Systeme.
|
|
blackXTC
(Themenstarter)
Anmeldungsdatum:
Okt. 1, 2008
Beiträge: 19
|
9. November 2008 16:34
Seit dem ich Intrepid (32 Bit) aufgespielt habe funktioniert das WLAN spitzenmäßig, es ist seit dem noch kein einzige mal abegebrochen.
Die Konfiguration war in 2 Minuten erledigt, ich musste nur den Windows-Treiber mit ndiswrapper installieren und den WPA-PSK Key im Network-Manager eingeben.
Das ACPI-Problem ist scheinbar seit Intrepid auch gelöst, ich konnte in der Kerneldiagnostik zumindest keines mehr erkennen.
|
2004 – 2012 ubuntuusers.de • Einige Rechte vorbehalten