Hallo, Ich habe genau das gleiche Problem und klinke mich deswegen hier einfach mal ein.
Mein laptpt (HP630) verbindet sich zwar mit dem netzwerk aber ich habe keinen zugriff auf das Internet, mit meinem anderen Laptop funktioniert es allerdings problemlos (auch nach dem upgrade auf 11.10).
Iwlist chan
lo no frequency information.
eth0 no frequency information.
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency=2.412 GHz (Channel 1)rfkill list :
0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: yes Hard blocked: no
lsmode:
Module Size Used by parport_pc 32114 0 ppdev 12849 0 bnep 17923 2 rfcomm 38408 8 snd_hda_codec_hdmi 31426 1 snd_hda_codec_realtek 254163 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi binfmt_misc 17292 1 snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25241 1 snd_seq_midi ath3k 13011 0 btusb 18160 1 uvcvideo 67271 0 snd_seq_midi_event 14475 1 snd_seq_midi videodev 85626 1 uvcvideo arc4 12473 2 bluetooth 148839 23 bnep,rfcomm,btusb snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ath9k 112612 0 wmi 18744 1 hp_wmi snd_timer 28932 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 63474 0 serio_raw 12990 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac80211 393421 1 ath9k ath9k_common 13599 1 ath9k ath9k_hw 293933 2 ath9k,ath9k_common ath 19387 2 ath9k,ath9k_hw rts_pstor 353227 0 cfg80211 172427 3 ath9k,mac80211,ath i915 509554 3 soundcore 12600 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm drm_kms_helper 32889 1 i915 drm 196290 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 18908 1 i915 mei 36466 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp r8169 47200 0 ahci 21634 2 libahci 25761 1 ahci
dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8|FW':
[ 0.000000] DMI: Hewlett-Packard HP 630 Notebook PC /3672, BIOS F.22 07/27/2011 [ 0.000000] ACPI: SSDT 767e1000 0035D (v01 HPQOEM SLIC-MPC 00003000 INTL 20100121) [ 0.000284] Initializing cgroup subsys net_cls [ 0.000361] CPU0: Thermal monitoring enabled (TM1) [ 0.303732] print_constraints: dummy: [ 0.912913] audit: initializing netlink socket (disabled) [ 0.976950] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.976954] ACPI: Thermal Zone [TSZ0] (30 C) [ 1.360665] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.535005] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.535035] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.535146] r8169 0000:01:00.0: setting latency timer to 64 [ 1.535377] r8169 0000:01:00.0: irq 41 for MSI/MSI-X [ 1.535954] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xf8450000, 44:1e:a1:cb:6c:6c, XID 0c200000 IRQ 41 [ 13.806290] Adding 1944572k swap on /dev/sda5. Priority:-1 extents:1 across:1944572k [ 13.954955] wmi: Mapper loaded [ 13.956567] ath9k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.956590] ath9k 0000:02:00.0: setting latency timer to 64 [ 14.010626] ath: EEPROM regdomain: 0x60 [ 14.010629] ath: EEPROM indicates we should expect a direct regpair map [ 14.010633] ath: Country alpha2 being used: 00 [ 14.010635] ath: Regpair used: 0x60 [ 14.038148] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 14.071528] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 14.113880] Registered led device: ath9k-phy0 [ 14.308864] fbcon: inteldrmfb (fb0) is primary device [ 14.407218] type=1400 audit(1335252447.483:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=760 comm="apparmor_parser" [ 14.417001] type=1400 audit(1335252447.495:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=760 comm="apparmor_parser" [ 14.488307] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 14.547588] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 14.547603] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 14.566032] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 14.566048] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 14.692005] r8169 0000:01:00.0: eth0: link down [ 14.692227] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.738709] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.865406] usbcore: registered new interface driver ath3k [ 15.166331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.674747] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 17.676801] wlan0: authenticated [ 17.677467] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 17.681699] wlan0: RX AssocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 17.681704] wlan0: associated [ 17.689197] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.471615] wlan0: no IPv6 routers present [ 174.095837] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 174.095866] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 236.618045] r8169 0000:01:00.0: eth0: link up [ 236.618370] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 247.218041] eth0: no IPv6 routers present [ 797.290112] cfg80211: Restoring regulatory settings [ 797.297602] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 798.295580] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 798.298260] wlan0: authenticated [ 798.298486] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 798.305317] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 798.305322] wlan0: associated [ 798.318169] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 917.643820] cfg80211: Restoring regulatory settings [ 917.651491] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 918.656060] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 918.659558] wlan0: authenticated [ 918.659728] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 918.663810] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 918.663816] wlan0: associated [ 1877.937947] cfg80211: Restoring regulatory settings [ 1877.945447] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1878.950759] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 1878.956431] wlan0: authenticated [ 1878.956605] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 1878.960558] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 1878.960563] wlan0: associated [ 2357.793860] cfg80211: Restoring regulatory settings [ 2357.801377] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2358.798053] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 2358.800297] wlan0: authenticated [ 2358.800448] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 2358.804441] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 2358.804446] wlan0: associated [ 2717.687724] cfg80211: Restoring regulatory settings [ 2717.693094] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2718.699700] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 2718.701689] wlan0: authenticated [ 2718.722843] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 2718.726838] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 2718.726843] wlan0: associated [ 3557.390808] cfg80211: Restoring regulatory settings [ 3557.397576] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 3558.424334] wlan0: authenticate with 00:26:5a:2b:87:12 (try 1) [ 3558.426355] wlan0: authenticated [ 3558.447992] wlan0: associate with 00:26:5a:2b:87:12 (try 1) [ 3558.455296] wlan0: RX ReassocResp from 00:26:5a:2b:87:12 (capab=0xc31 status=0 aid=1) [ 3558.455301] wlan0: associated
cat /etc/NetworkManager/NetworkManager.conf
[main] plugins=ifupdown,keyfile [ifupdown] managed=false
ich hoffe das sind die terminal ausgaben, die ihr braucht....
ich hoffe ihr könnt mir weiter helfen!
Moderiert von "Elektronenblitz63":
Artikel als eigenständigen Beitrag eröffnet. Hänge dich grundsätzlich nicht an andere Artikel an.
2004 – 2013 ubuntuusers.de • Einige Rechte vorbehalten