Forum

WLAN vorhanden, verbindet nicht

Alle Foren als gelesen markieren

ubuntuusers.de › Forum › Netzwerk und Internetzugang einrichten › WLAN vorhanden, verbindet nicht

WLAN vorhanden, verbindet nicht

« Zurück1Weiter »

Status: Gelöst | Ubuntu-Version: Xubuntu 12.04 (Precise Pangolin)
Antworten |

elchfan Anmeldungsdatum: Nov. 22, 2006 Beiträge: 133 Wohnort: @~/	Zitieren 10. Juli 2012 10:36 Hallo, ich habe einen Laptop mit WLAN (Intel Centrino), auf dem Xubuntu 12.04 installiert ist. Der Netzwerkmanager zeigt verschiedene WLAN-Netze an, auch meines. Beim Auswählen des Netzes verbindet er sich jedoch nicht. LAN ist kein Problem. Hat jemand einen Rat? Danke im Voraus.
bsn Anmeldungsdatum: Sept. 17, 2006 Beiträge: 6002 Wohnort: Baden-Württemberg	Zitieren 10. Juli 2012 10:50 Hallo, zeige uns diese vor-dem-erstellen-eines-neuen-beitrags-bitte- Daten alle. Gruß bsn
elchfan (Themenstarter) Anmeldungsdatum: Nov. 22, 2006 Beiträge: 133 Wohnort: @~/	Zitieren 10. Juli 2012 11:30 Hallo bsn, hier kommen die nöigen Infos: Router: Speedport W700V Laptop: Fujitsu-Siemens C Series Lifebook (Centrino, d.h. WLAN im Chipsatz integriert) Kernel: Linux schloessle 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 16:26:01 UTC 2012 i686 i686 i386 GNU/Linux lspci -nnk \| grep -i net -A2: 02:00.0 Ethernet controller ^[200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: Fujitsu Limited. Device [10cf:1300] Kernel driver in use: tg3 -- 06:05.0 Network controller ^[280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2702] Kernel driver in use: ipw2200 pccardctl info: PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 egrep -v "^$\|^#" /etc/network/interfaces: auto lo iface lo inet loopback egrep -v "^$\|^#" /etc/resolv.conf: nameserver 127.0.0.1 search Speedport_W_700V egrep -v "^$\|^#" /etc/hosts: 127.0.0.1 localhost 127.0.1.1 schloessle ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/udev/rules.d/70-persistent-net.rules: # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0 (tg3) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?", ATTR{address}=="00:0b:5d:94:5e:c2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth", NAME="eth0" # PCI device 0x8086:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0 (ipw2200) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?", ATTR{address}=="00:13:ce:26:e2:f6", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth", NAME="eth1" ipconfig: eth0 Link encap:Ethernet Hardware Adresse 00:0b:5d:94:5e:c2 inet Adresse:192.168.2.104 Bcast:192.168.2.255 Maske:255.255.255.0 inet6-Adresse: fe80::20b:5dff:fe94:5ec2/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:3362 errors:0 dropped:0 overruns:0 frame:0 TX packets:2613 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:2497649 (2.4 MB) TX-Bytes:426284 (426.2 KB) Interrupt:16 eth1 Link encap:Ethernet Hardware Adresse 00:13:ce:26:e2:f6 inet6-Adresse: fe80::213:ceff:fe26:e2f6/64 Gültigkeitsbereich:Verbindung UP BROADCAST MULTICAST MTU:1500 Metrik:1 RX packets:14 errors:258 dropped:258 overruns:0 frame:0 TX packets:222 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:2296 (2.2 KB) TX-Bytes:46120 (46.1 KB) Interrupt:18 Basisadresse:0x2000 Speicher:b0208000-b0208fff lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metrik:1 RX packets:968 errors:0 dropped:0 overruns:0 frame:0 TX packets:968 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:64985 (64.9 KB) TX-Bytes:64985 (64.9 KB) route -n Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.2.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 iwconfig: lo no wireless extensions. eth1 IEEE 802.11bg ESSID:"i8Fz3plK85m" Mode:Managed Frequency:2.412 GHz Access Point: 00:12:BF:74:CD:59 Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=73/100 Signal level=-52 dBm Noise level=-88 dBm Rx invalid nwid:0 Rx invalid crypt:269 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:20 eth0 no wireless extensions. iwlist chan: lo no frequency information. eth1 14 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Channel 14 : 2.484 GHz Current Frequency:2.412 GHz (Channel 1) eth0 no frequency information. sudo iwlist scan: lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:12:BF:74:CD:59 ESSID:"i8Fz3plK85m" Protocol:IEEE 802.11bg Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 9 Mb/s; 11 Mb/s 6 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality=58/100 Signal level=-52 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Extra: Last beacon: 180ms ago Cell 02 - Address: 00:04:0E:D2:49:BC ESSID:"FRITZ!Box Fon WLAN 7170" Protocol:IEEE 802.11bg Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality=35/100 Signal level=-79 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 680ms ago Cell 03 - Address: 00:04:0E:DA:84:18 ESSID:"PeterKurrleFensterbauFellbach" Protocol:IEEE 802.11bg Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality=35/100 Signal level=-79 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Extra: Last beacon: 3824ms ago eth0 Interface doesn't support scanning. rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by michael_mic 12540 0 arc4 12473 0 lib80211_crypt_tkip 17240 0 lib80211_crypt_ccmp 12789 0 snd_hda_codec_si3054 12864 1 snd_hda_codec_realtek 174055 1 bnep 17830 2 rfcomm 38139 0 bluetooth 158438 8 bnep,rfcomm joydev 17393 0 ppdev 12849 0 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec pcmcia 39791 0 snd_pcm 80845 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13139 1 nf_conntrack_ipv6 snd_seq_midi 13132 0 ipt_REJECT 12512 1 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 18 xt_addrtype 12596 4 xt_state 12514 14 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi ipw2200 146176 0 i915 414620 2 libipw 46701 1 ipw2200 tifm_7xx1 12937 0 cfg80211 178679 2 ipw2200,libipw ip6table_filter 12711 1 psmouse 87213 0 ip6_tables 18432 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp tifm_core 15040 1 tifm_7xx1 iptable_filter 12706 1 ip_tables 18106 1 iptable_filter serio_raw 13027 0 x_tables 21974 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables yenta_socket 27428 0 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket lib80211 14040 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc irda 185517 0 snd_timer 28931 2 snd_pcm,snd_seq drm_kms_helper 45466 1 i915 crc_ccitt 12595 1 irda drm 197692 3 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32114 1 snd 62064 16 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 13199 1 i915 fujitsu_laptop 18504 0 soundcore 14635 1 snd mac_hid 13077 0 snd_page_alloc 14115 2 snd_hda_intel,snd_pcm video 19068 1 i915 lp 17455 0 parport 40930 3 ppdev,parport_pc,lp firewire_ohci 40180 0 sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci firewire_core 56906 1 firewire_ohci crc_itu_t 12627 1 firewire_core tg3 137273 0 System- und Fehlermeldungen des Kernels: [ 0.000000] original variable MTRRs [ 0.004358] CPU0: Thermal monitoring enabled (TM2) [ 0.064003] print_constraints: dummy: [ 0.076660] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.085770] i2c-core: driver [aat2870] using legacy suspend method [ 0.085773] i2c-core: driver [aat2870] using legacy resume method [ 0.143559] audit: initializing netlink socket (disabled) [ 0.466283] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.480441] ata6: port disabled--ignoring [ 1.037611] block loop5: hash matches [ 1.704372] tg3.c:v3.121 (November 2, 2011) [ 1.704392] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.704406] tg3 0000:02:00.0: setting latency timer to 64 [ 1.838779] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:0b:5d:94:5e:c2 [ 1.838786] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.838790] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.838794] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.344163] firewire_core: created device fw0: GUID 00000e100350fb96, S400 [ 18.290761] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.621299] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k [ 18.962252] intel_rng: FWH not detected [ 19.009050] lib80211_crypt: registered algorithm 'NULL' [ 19.081204] libipw: 802.11 data/management/control stack, git-1.1.13 [ 19.081207] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 19.102298] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.102301] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 19.485446] ipw2200 0000:06:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.485474] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 20.505240] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.521808] cfg80211: failed to add phy80211 symlink to netdev! [ 20.525279] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 20.893108] fbcon: inteldrmfb (fb0) is primary device [ 21.232646] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.235538] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.725452] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 22.725457] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 22.725506] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.192024] eth0: no IPv6 routers present [ 93.826453] lib80211_crypt: registered algorithm 'CCMP' [ 93.832362] lib80211_crypt: registered algorithm 'TKIP' [ 104.768036] eth1: no IPv6 routers present [ 110.712887] tg3 0000:02:00.0: eth0: Link is down [ 115.542785] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 146.976027] eth1: no IPv6 routers present [ 200.712054] eth1: no IPv6 routers present [ 217.216051] ipw2200: Failed to send SCAN_ABORT: Command timed out. [ 217.308436] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 218.304123] ipw2200: Failed to send CARD_DISABLE: Command timed out. [ 222.792415] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 233.568050] eth1: no IPv6 routers present [ 275.296037] eth1: no IPv6 routers present [ 326.832029] eth1: no IPv6 routers present [ 334.334801] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 334.334812] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 334.334912] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 345.160102] eth0: no IPv6 routers present [ 363.192033] eth0: no IPv6 routers present [ 2186.080034] eth1: no IPv6 routers present Konfiguration Netzwerkmanager: cat /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq no-auto-default=00:0B:5D:94:5E:C2, [ifupdown] managed=false Vielen Dank für Eure Mühe im Voraus.
Lidux Anmeldungsdatum: April 18, 2007 Beiträge: 5843	Zitieren 10. Juli 2012 13:15 Hallo elchfan, Bitte noch die Ausgabe von: lsmod dmesg im Codeblock. Versuche mal im Router auf reine WPA2 (AES/CCMP), WPS deaktivieren, MAC Filter deaktivieren bzw. Netzwerkgerät zulassen und nur n+b Modus. Gruss Lidux
bsn Anmeldungsdatum: Sept. 17, 2006 Beiträge: 6002 Wohnort: Baden-Württemberg	Zitieren 10. Juli 2012 13:28 Hallo, stelle in deinem Router die Verschlüsselung auf rein WPA oder WPA2! Denn so wie es aussieht hat die Karte Probleme mit der Verschlüsselung beim Empfangen: eth1 IEEE 802.11bg ESSID:"i8Fz3plK85m" Mode:Managed Frequency:2.412 GHz Access Point: 00:12:BF:74:CD:59 Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=73/100 Signal level=-52 dBm Noise level=-88 dBm Rx invalid nwid:0 Rx invalid crypt:269 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:20 Auch solltest du bei der Fehlersuche im Wlan das Kabel gezogen haben! Gruß bsn
elchfan (Themenstarter) Anmeldungsdatum: Nov. 22, 2006 Beiträge: 133 Wohnort: @~/	Zitieren 10. Juli 2012 15:23 @Lidus: lsmod: Module Size Used by snd_hda_codec_si3054 12864 1 snd_hda_codec_realtek 174055 1 rfcomm 38139 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep joydev 17393 0 ppdev 12849 0 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec pcmcia 39791 0 snd_seq_midi 13132 0 ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13139 1 nf_conntrack_ipv6 tifm_7xx1 12937 0 snd_rawmidi 25424 1 snd_seq_midi ipt_REJECT 12512 1 ipw2200 146176 0 libipw 46701 1 ipw2200 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 18 cfg80211 178679 2 ipw2200,libipw xt_addrtype 12596 4 tifm_core 15040 1 tifm_7xx1 xt_state 12514 14 psmouse 87213 0 snd_seq_midi_event 14475 1 snd_seq_midi yenta_socket 27428 0 i915 414620 2 pcmcia_rsrc 18367 1 yenta_socket serio_raw 13027 0 lib80211 14040 2 ipw2200,libipw pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc ip6table_filter 12711 1 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ip6_tables 18432 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18106 1 iptable_filter x_tables 21974 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables irda 185517 0 snd_timer 28931 2 snd_pcm,snd_seq drm_kms_helper 45466 1 i915 crc_ccitt 12595 1 irda drm 197692 3 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32114 1 snd 62064 16 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 13199 1 i915 fujitsu_laptop 18504 0 mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm video 19068 1 i915 lp 17455 0 parport 40930 3 ppdev,parport_pc,lp firewire_ohci 40180 0 firewire_core 56906 1 firewire_ohci crc_itu_t 12627 1 firewire_core sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci tg3 137273 0 carola@schloessle:~$ lsmod Module Size Used by snd_hda_codec_si3054 12864 1 snd_hda_codec_realtek 174055 1 rfcomm 38139 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep joydev 17393 0 ppdev 12849 0 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec pcmcia 39791 0 snd_seq_midi 13132 0 ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13139 1 nf_conntrack_ipv6 tifm_7xx1 12937 0 snd_rawmidi 25424 1 snd_seq_midi ipt_REJECT 12512 1 ipw2200 146176 0 libipw 46701 1 ipw2200 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 18 cfg80211 178679 2 ipw2200,libipw xt_addrtype 12596 4 tifm_core 15040 1 tifm_7xx1 xt_state 12514 14 psmouse 87213 0 snd_seq_midi_event 14475 1 snd_seq_midi yenta_socket 27428 0 i915 414620 2 pcmcia_rsrc 18367 1 yenta_socket serio_raw 13027 0 lib80211 14040 2 ipw2200,libipw pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc ip6table_filter 12711 1 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ip6_tables 18432 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18106 1 iptable_filter x_tables 21974 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables irda 185517 0 snd_timer 28931 2 snd_pcm,snd_seq drm_kms_helper 45466 1 i915 crc_ccitt 12595 1 irda drm 197692 3 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32114 1 snd 62064 16 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 13199 1 i915 fujitsu_laptop 18504 0 mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm video 19068 1 i915 lp 17455 0 parport 40930 3 ppdev,parport_pc,lp firewire_ohci 40180 0 firewire_core 56906 1 firewire_ohci crc_itu_t 12627 1 firewire_core sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci tg3 137273 0 dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-26-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP Thu Jun 14 16:26:01 UTC 2012 (Ubuntu 3.2.0-26.41-generic 3.2.19) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f680000 (usable) [ 0.000000] BIOS-e820: 000000001f680000 - 000000001f697000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f697000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0010000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: FUJITSU SIEMENS LIFEBOOK C1320/FJNB1A1, BIOS Version 1.07 09/16/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1f680 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 01F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 503MB, range: 1MB, type UC [ 0.000000] reg 2, base: 504MB, range: 8MB, type UC [ 0.000000] total RAM covered: 503M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 512MB, type WB [ 0.000000] reg 1, base: 503MB, range: 1MB, type UC [ 0.000000] reg 2, base: 504MB, range: 8MB, type UC [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000001f680000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001f400000 page 2M [ 0.000000] 001f400000 - 001f680000 page 4k [ 0.000000] kernel direct mapping tables up to 1f680000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 1dabf000 - 1e839000 [ 0.000000] ACPI: RSDP 000f58f0 00014 (v00 FUJ ) [ 0.000000] ACPI: RSDT 1f68ffce 00044 (v01 FUJ FJNB1A1 01070000 FUJ 00000100) [ 0.000000] ACPI: FACP 1f696f8c 00074 (v01 FUJ FJNB1A1 01070000 FUJ 00000100) [ 0.000000] ACPI: DSDT 1f690012 060F1 (v01 FUJ FJNB1A1 01070000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1f697fc0 00040 [ 0.000000] ACPI: APIC 1f696103 0005A (v01 FUJ FJNB1A1 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 1f69615d 00277 (v01 FUJ FJNB1A1 01070000 INTL 20030522) [ 0.000000] ACPI: SSDT 1f6965a2 0013F (v01 FUJ FJNB1A1 01070000 INTL 20030522) [ 0.000000] ACPI: SSDT 1f69677e 00760 (v01 FUJ FJNB1A1 01070000 INTL 20030522) [ 0.000000] ACPI: SSDT 1f696ede 0004A (v01 FUJ FJNB1A1 01070000 MSFT 0100000E) [ 0.000000] ACPI: MCFG 1f696f28 0003C (v01 FUJ FJNB1A1 01070000 FUJ 00000100) [ 0.000000] ACPI: BOOT 1f696f64 00028 (v01 FUJ FJNB1A1 01070000 FUJ 00000100) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1f680000 [ 0.000000] low ram: 0 - 1f680000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001f680 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001f680 [ 0.000000] On node 0 totalpages: 128527 [ 0.000000] free_area_init_node: node 0, pgdat c1822dc0, node_mem_map df28f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123571 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @df27e000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=134096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127522 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=51852604-32ea-4ccd-b625-97b9ce6ead2a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2057984 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 483772k/514560k available (5615k kernel code, 30336k reserved, 2765k data, 712k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xdfe80000 - 0xff7fe000 ( 505 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf680000 ( 502 MB) [ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB) [ 0.000000] .data : 0xc157be04 - 0xc182f4c0 (2765 kB) [ 0.000000] .text : 0xc1000000 - 0xc157be04 (5615 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=dec08000 soft=dec0a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1861.988 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.97 BogoMIPS (lpj=7447952) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004033] Security Framework initialized [ 0.004057] AppArmor: AppArmor initialized [ 0.004060] Yama: becoming mindful. [ 0.004126] Mount-cache hash table entries: 512 [ 0.004281] Initializing cgroup subsys cpuacct [ 0.004288] Initializing cgroup subsys memory [ 0.004299] Initializing cgroup subsys devices [ 0.004302] Initializing cgroup subsys freezer [ 0.004305] Initializing cgroup subsys blkio [ 0.004314] Initializing cgroup subsys perf_event [ 0.004340] Disabled fast string operations [ 0.004348] mce: CPU supports 5 MCE banks [ 0.004358] CPU0: Thermal monitoring enabled (TM2) [ 0.004599] SMP alternatives: switching to UP code [ 0.013538] Freeing SMP alternatives: 24k freed [ 0.013546] ACPI: Core revision 20110623 [ 0.019501] ftrace: allocating 25884 entries in 51 pages [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063720] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 0.064003] Performance Events: p6 PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 32 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 00000000ffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 0000000000000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Brought up 1 CPUs [ 0.064003] Total of 1 processors activated (3723.97 BogoMIPS). [ 0.064003] devtmpfs: initialized [ 0.064003] EVM: security.selinux [ 0.064003] EVM: security.SMACK64 [ 0.064003] EVM: security.capability [ 0.064003] PM: Registering ACPI NVS region at 1f697000 (430080 bytes) [ 0.064003] print_constraints: dummy: [ 0.064003] RTC time: 13:10:47, date: 07/10/12 [ 0.064003] NET: Registered protocol family 16 [ 0.064003] EISA bus registered [ 0.064003] ACPI: bus type pci registered [ 0.064003] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000) [ 0.064003] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820 [ 0.064003] PCI: Using MMCONFIG for extended config space [ 0.064003] PCI: Using configuration type 1 for base access [ 0.065097] bio: create slab <bio-0> at 0 [ 0.065199] ACPI: Added _OSI(Module Device) [ 0.065202] ACPI: Added _OSI(Processor Device) [ 0.065204] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.065207] ACPI: Added _OSI(Processor Aggregator Device) [ 0.066411] ACPI: EC: Look up EC in DSDT [ 0.070765] ACPI: Interpreter enabled [ 0.070777] ACPI: (supports S0 S3 S4 S5) [ 0.070802] ACPI: Using IOAPIC for interrupt routing [ 0.076668] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.076671] HEST: Table not found. [ 0.076677] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.077057] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.077798] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.077802] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.077806] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.077810] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.077813] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.077817] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xdfffffff] (ignored) [ 0.077830] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600 [ 0.077877] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300 [ 0.077887] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff] [ 0.077894] pci 0000:00:02.0: reg 14: [io 0x1400-0x1407] [ 0.077900] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] [ 0.077907] pci 0000:00:02.0: reg 1c: [mem 0xb0040000-0xb007ffff] [ 0.077941] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380 [ 0.077950] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff] [ 0.078046] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403 [ 0.078069] pci 0000:00:1b.0: reg 10: [mem 0xb0000000-0xb0003fff 64bit] [ 0.078166] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.078171] pci 0000:00:1b.0: PME# disabled [ 0.078200] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604 [ 0.078301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.078306] pci 0000:00:1c.0: PME# disabled [ 0.078337] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604 [ 0.078438] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.078443] pci 0000:00:1c.1: PME# disabled [ 0.078478] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03 [ 0.078531] pci 0000:00:1d.0: reg 20: [io 0x1420-0x143f] [ 0.078571] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03 [ 0.078624] pci 0000:00:1d.1: reg 20: [io 0x1440-0x145f] [ 0.078664] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03 [ 0.078717] pci 0000:00:1d.2: reg 20: [io 0x1460-0x147f] [ 0.078757] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03 [ 0.078810] pci 0000:00:1d.3: reg 20: [io 0x1480-0x149f] [ 0.078861] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03 [ 0.078884] pci 0000:00:1d.7: reg 10: [mem 0xb0004000-0xb00043ff] [ 0.078984] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.078990] pci 0000:00:1d.7: PME# disabled [ 0.079012] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.079098] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601 [ 0.079206] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.079216] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.079223] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.079228] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at fd00-fd7f [ 0.079233] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0400-040f [ 0.079255] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101 [ 0.079271] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.079283] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.079295] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.079307] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.079319] pci 0000:00:1f.1: reg 20: [io 0x1410-0x141f] [ 0.079365] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101 [ 0.079386] pci 0000:00:1f.2: reg 10: [io 0x14b8-0x14bf] [ 0.079397] pci 0000:00:1f.2: reg 14: [io 0x140c-0x140f] [ 0.079409] pci 0000:00:1f.2: reg 18: [io 0x14b0-0x14b7] [ 0.079421] pci 0000:00:1f.2: reg 1c: [io 0x1408-0x140b] [ 0.079433] pci 0000:00:1f.2: reg 20: [io 0x14a0-0x14af] [ 0.079445] pci 0000:00:1f.2: reg 24: [mem 0xb0004400-0xb00047ff] [ 0.079488] pci 0000:00:1f.2: PME# supported from D3hot [ 0.079493] pci 0000:00:1f.2: PME# disabled [ 0.079510] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05 [ 0.079581] pci 0000:00:1f.3: reg 20: [io 0x14c0-0x14df] [ 0.079712] pci 0000:02:00.0: [14e4:167d] type 0 class 0x000200 [ 0.079744] pci 0000:02:00.0: reg 10: [mem 0xb0100000-0xb010ffff 64bit] [ 0.079905] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.079912] pci 0000:02:00.0: PME# disabled [ 0.079934] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.079948] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.079957] pci 0000:00:1c.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.080031] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.080094] pci 0000:06:03.0: [104c:8031] type 2 class 0x000607 [ 0.080119] pci 0000:06:03.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.080161] pci 0000:06:03.0: supports D1 D2 [ 0.080163] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080170] pci 0000:06:03.0: PME# disabled [ 0.080195] pci 0000:06:03.2: [104c:8032] type 0 class 0x000c00 [ 0.080221] pci 0000:06:03.2: reg 10: [mem 0xb0206000-0xb02067ff] [ 0.080236] pci 0000:06:03.2: reg 14: [mem 0xb0200000-0xb0203fff] [ 0.080338] pci 0000:06:03.2: supports D1 D2 [ 0.080341] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot [ 0.080347] pci 0000:06:03.2: PME# disabled [ 0.080371] pci 0000:06:03.3: [104c:8033] type 0 class 0x000180 [ 0.080396] pci 0000:06:03.3: reg 10: [mem 0xb0204000-0xb0205fff] [ 0.080507] pci 0000:06:03.3: supports D1 D2 [ 0.080509] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot [ 0.080515] pci 0000:06:03.3: PME# disabled [ 0.080539] pci 0000:06:03.4: [104c:8034] type 0 class 0x000805 [ 0.080564] pci 0000:06:03.4: reg 10: [mem 0xb0207000-0xb02070ff] [ 0.080579] pci 0000:06:03.4: reg 14: [mem 0xb0206c00-0xb0206cff] [ 0.080594] pci 0000:06:03.4: reg 18: [mem 0xb0206800-0xb02068ff] [ 0.080681] pci 0000:06:03.4: supports D1 D2 [ 0.080684] pci 0000:06:03.4: PME# supported from D0 D1 D2 D3hot [ 0.080689] pci 0000:06:03.4: PME# disabled [ 0.080720] pci 0000:06:05.0: [8086:4220] type 0 class 0x000280 [ 0.080745] pci 0000:06:05.0: reg 10: [mem 0xb0208000-0xb0208fff] [ 0.080857] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold [ 0.080863] pci 0000:06:05.0: PME# disabled [ 0.080918] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode) [ 0.080927] pci 0000:00:1e.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.080935] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.080939] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.080991] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07] [ 0.081014] pci_bus 0000:00: on NUMA node 0 [ 0.081018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.081187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.081298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.081328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.081366] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.081370] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.081373] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.085099] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) 11 [ 0.085160] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) [ 0.085220] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) 11 [ 0.085278] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) [ 0.085337] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled. [ 0.085396] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) 0, disabled. [ 0.085456] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled. [ 0.085515] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.085630] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.085641] vgaarb: loaded [ 0.085643] vgaarb: bridge control possible 0000:00:02.0 [ 0.085787] i2c-core: driver [aat2870] using legacy suspend method [ 0.085790] i2c-core: driver [aat2870] using legacy resume method [ 0.085893] SCSI subsystem initialized [ 0.085935] libata version 3.00 loaded. [ 0.085994] usbcore: registered new interface driver usbfs [ 0.086009] usbcore: registered new interface driver hub [ 0.086037] usbcore: registered new device driver usb [ 0.086148] PCI: Using ACPI for IRQ routing [ 0.086269] PCI: pci_cache_line_size set to 64 bytes [ 0.086362] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.086365] reserve RAM buffer: 000000001f680000 - 000000001fffffff [ 0.086494] NetLabel: Initializing [ 0.086497] NetLabel: domain hash size = 128 [ 0.086498] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.086512] NetLabel: unlabeled traffic allowed by default [ 0.086691] hpet clockevent registered [ 0.086696] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.086703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.086709] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.092044] Switching to clocksource hpet [ 0.101558] AppArmor: AppArmor Filesystem Enabled [ 0.101611] pnp: PnP ACPI init [ 0.101648] ACPI: bus type pnp registered [ 0.101692] pnp 00:00: [mem 0xe0000000-0xefffffff] [ 0.101772] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.101778] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102185] pnp 00:01: [bus 00-ff] [ 0.102189] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.102192] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.102195] pnp 00:01: [io 0x0d00-0xffff window] [ 0.102198] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.102201] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.102204] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.102207] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.102210] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.102213] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.102217] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.102220] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.102223] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.102226] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.102229] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.102232] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.102235] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.102238] pnp 00:01: [mem 0x000f0000-0x000fffff window] [ 0.102241] pnp 00:01: [mem 0x20000000-0xdfffffff window] [ 0.102308] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.102414] pnp 00:02: [io 0x0010-0x001f] [ 0.102418] pnp 00:02: [io 0x0024-0x0025] [ 0.102420] pnp 00:02: [io 0x0028-0x0029] [ 0.102423] pnp 00:02: [io 0x002c-0x002d] [ 0.102426] pnp 00:02: [io 0x002e-0x002f] [ 0.102428] pnp 00:02: [io 0x0030-0x0031] [ 0.102431] pnp 00:02: [io 0x0034-0x0035] [ 0.102434] pnp 00:02: [io 0x0038-0x0039] [ 0.102436] pnp 00:02: [io 0x003c-0x003d] [ 0.102439] pnp 00:02: [io 0x0050-0x0053] [ 0.102441] pnp 00:02: [io 0x0062] [ 0.102444] pnp 00:02: [io 0x0066] [ 0.102446] pnp 00:02: [io 0x0072-0x0077] [ 0.102449] pnp 00:02: [io 0x0080] [ 0.102451] pnp 00:02: [io 0x0090-0x009f] [ 0.102454] pnp 00:02: [io 0x00a4-0x00a5] [ 0.102457] pnp 00:02: [io 0x00a8-0x00a9] [ 0.102459] pnp 00:02: [io 0x00ac-0x00ad] [ 0.102462] pnp 00:02: [io 0x00b0-0x00b1] [ 0.102465] pnp 00:02: [io 0x00b2-0x00b3] [ 0.102472] pnp 00:02: [io 0x00b4-0x00b5] [ 0.102474] pnp 00:02: [io 0x00b8-0x00b9] [ 0.102477] pnp 00:02: [io 0x00bc-0x00bd] [ 0.102480] pnp 00:02: [io 0x04d0-0x04d1] [ 0.102482] pnp 00:02: [io 0x0800-0x080f] [ 0.102485] pnp 00:02: [io 0x1000-0x107f] [ 0.102488] pnp 00:02: [io 0x1080-0x10ff] [ 0.102490] pnp 00:02: [io 0x1100-0x111f] [ 0.102493] pnp 00:02: [io 0x1180-0x11bf] [ 0.102496] pnp 00:02: [io 0xf800-0xf87f] [ 0.102498] pnp 00:02: [io 0xf880-0xf8ff] [ 0.102501] pnp 00:02: [io 0xfc00-0xfc7f] [ 0.102504] pnp 00:02: [io 0xfc80-0xfcff] [ 0.102506] pnp 00:02: [io 0xfd00-0xfd7f] [ 0.102509] pnp 00:02: [io 0xfe00-0xfe01] [ 0.102512] pnp 00:02: [mem 0xf0000000-0xf0003fff] [ 0.102515] pnp 00:02: [mem 0xf0004000-0xf0004fff] [ 0.102518] pnp 00:02: [mem 0xf0005000-0xf0005fff] [ 0.102521] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.102523] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.102526] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.102529] pnp 00:02: [mem 0xfef00000-0xfeffffff] [ 0.102532] pnp 00:02: [mem 0x000cf200-0x000cf7ff] [ 0.102535] pnp 00:02: [mem 0xffb00000-0xffbfffff] [ 0.102659] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.102663] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.102667] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.102670] system 00:02: [io 0x1080-0x10ff] has been reserved [ 0.102673] system 00:02: [io 0x1100-0x111f] has been reserved [ 0.102677] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.102680] system 00:02: [io 0xf800-0xf87f] has been reserved [ 0.102684] system 00:02: [io 0xf880-0xf8ff] has been reserved [ 0.102687] system 00:02: [io 0xfc00-0xfc7f] has been reserved [ 0.102691] system 00:02: [io 0xfc80-0xfcff] has been reserved [ 0.102694] system 00:02: [io 0xfd00-0xfd7f] has been reserved [ 0.102698] system 00:02: [io 0xfe00-0xfe01] has been reserved [ 0.102702] system 00:02: [mem 0xf0000000-0xf0003fff] has been reserved [ 0.102705] system 00:02: [mem 0xf0004000-0xf0004fff] has been reserved [ 0.102709] system 00:02: [mem 0xf0005000-0xf0005fff] has been reserved [ 0.102713] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.102716] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.102720] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.102724] system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.102727] system 00:02: [mem 0x000cf200-0x000cf7ff] has been reserved [ 0.102731] system 00:02: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.102735] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102808] pnp 00:03: [io 0x0000-0x000f] [ 0.102811] pnp 00:03: [io 0x0081-0x008f] [ 0.102814] pnp 00:03: [io 0x00c0-0x00df] [ 0.102817] pnp 00:03: [dma 4] [ 0.102852] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.102885] pnp 00:04: [io 0x0070-0x0071] [ 0.102904] pnp 00:04: [irq 8] [ 0.102939] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.102957] pnp 00:05: [io 0x0061] [ 0.102998] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.103016] pnp 00:06: [io 0x00f0-0x00fe] [ 0.103023] pnp 00:06: [irq 13] [ 0.103058] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.103077] pnp 00:07: [io 0x0060] [ 0.103079] pnp 00:07: [io 0x0064] [ 0.103085] pnp 00:07: [irq 1] [ 0.103125] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.103146] pnp 00:08: [irq 12] [ 0.103181] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.103447] pnp 00:09: [io 0x03f8-0x03ff] [ 0.103454] pnp 00:09: [irq 4] [ 0.103518] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.103931] pnp 00:0a: [io 0x02e8-0x02ef] [ 0.103934] pnp 00:0a: [io 0x0400-0x043f] [ 0.103941] pnp 00:0a: [irq 3] [ 0.103944] pnp 00:0a: [dma 3] [ 0.104042] pnp 00:0a: Plug and Play ACPI device, IDs SMCf010 (active) [ 0.104381] pnp 00:0b: [io 0x0378-0x037f] [ 0.104384] pnp 00:0b: [io 0x0778-0x077b] [ 0.104390] pnp 00:0b: [irq 7] [ 0.104477] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.104926] pnp: PnP ACPI: found 12 devices [ 0.104928] ACPI: ACPI bus type pnp unregistered [ 0.104934] PnPBIOS: Disabled by ACPI PNP [ 0.141900] PCI: max bus depth: 2 pci_try_num: 3 [ 0.141956] pci 0000:00:02.1: BAR 0: assigned [mem 0x20000000-0x2007ffff] [ 0.141962] pci 0000:00:02.1: BAR 0: set to [mem 0x20000000-0x2007ffff] (PCI address [0x20000000-0x2007ffff]) [ 0.141968] pci 0000:00:1e.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref] [ 0.141972] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.141976] pci 0000:00:1c.1: BAR 14: assigned [mem 0x20100000-0x202fffff] [ 0.141980] pci 0000:00:1c.1: BAR 15: assigned [mem 0x20300000-0x204fffff 64bit pref] [ 0.141984] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.141988] pci 0000:00:1c.0: BAR 15: assigned [mem 0x20500000-0x206fffff 64bit pref] [ 0.141993] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.141997] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.142001] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.142008] pci 0000:00:1c.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.142014] pci 0000:00:1c.0: bridge window [mem 0x20500000-0x206fffff 64bit pref] [ 0.142023] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.142027] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.142034] pci 0000:00:1c.1: bridge window [mem 0x20100000-0x202fffff] [ 0.142040] pci 0000:00:1c.1: bridge window [mem 0x20300000-0x204fffff 64bit pref] [ 0.142051] pci 0000:06:03.0: BAR 0: assigned [mem 0x28000000-0x28000fff] [ 0.142058] pci 0000:06:03.0: BAR 0: set to [mem 0x28000000-0x28000fff] (PCI address [0x28000000-0x28000fff]) [ 0.142063] pci 0000:06:03.0: BAR 16: assigned [mem 0x2c000000-0x2fffffff] [ 0.142067] pci 0000:06:03.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref] [ 0.142070] pci 0000:06:03.0: BAR 14: assigned [io 0x2000-0x20ff] [ 0.142073] pci 0000:06:03.0: BAR 13: assigned [io 0x2400-0x24ff] [ 0.142077] pci 0000:06:03.0: CardBus bridge to [bus 07-0a] [ 0.142080] pci 0000:06:03.0: bridge window [io 0x2400-0x24ff] [ 0.142086] pci 0000:06:03.0: bridge window [io 0x2000-0x20ff] [ 0.142093] pci 0000:06:03.0: bridge window [mem 0x24000000-0x27ffffff pref] [ 0.142099] pci 0000:06:03.0: bridge window [mem 0x2c000000-0x2fffffff] [ 0.142106] pci 0000:00:1e.0: PCI bridge to [bus 06-07] [ 0.142110] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 0.142117] pci 0000:00:1e.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.142123] pci 0000:00:1e.0: bridge window [mem 0x24000000-0x27ffffff pref] [ 0.142151] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.142158] pci 0000:00:1c.0: setting latency timer to 64 [ 0.142166] pci 0000:00:1c.1: enabling device (0100 -> 0103) [ 0.142174] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.142181] pci 0000:00:1c.1: setting latency timer to 64 [ 0.142190] pci 0000:00:1e.0: setting latency timer to 64 [ 0.142199] pci 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.142206] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.142209] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.142213] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.142216] pci_bus 0000:02: resource 1 [mem 0xb0100000-0xb01fffff] [ 0.142219] pci_bus 0000:02: resource 2 [mem 0x20500000-0x206fffff 64bit pref] [ 0.142223] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.142226] pci_bus 0000:03: resource 1 [mem 0x20100000-0x202fffff] [ 0.142229] pci_bus 0000:03: resource 2 [mem 0x20300000-0x204fffff 64bit pref] [ 0.142232] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.142235] pci_bus 0000:06: resource 1 [mem 0xb0200000-0xb02fffff] [ 0.142239] pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref] [ 0.142242] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] [ 0.142245] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] [ 0.142248] pci_bus 0000:07: resource 0 [io 0x2400-0x24ff] [ 0.142251] pci_bus 0000:07: resource 1 [io 0x2000-0x20ff] [ 0.142254] pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref] [ 0.142258] pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff] [ 0.142313] NET: Registered protocol family 2 [ 0.142396] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.142618] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.142733] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.142846] TCP: Hash tables configured (established 16384 bind 16384) [ 0.142849] TCP reno registered [ 0.142853] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.142863] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.142945] NET: Registered protocol family 1 [ 0.142963] pci 0000:00:02.0: Boot video device [ 0.142991] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.143012] pci 0000:00:1d.0: PCI INT A disabled [ 0.143024] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.143043] pci 0000:00:1d.1: PCI INT B disabled [ 0.143054] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.143073] pci 0000:00:1d.2: PCI INT C disabled [ 0.143081] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.143100] pci 0000:00:1d.3: PCI INT D disabled [ 0.143109] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.143137] pci 0000:00:1d.7: PCI INT A disabled [ 0.143173] PCI: CLS 32 bytes, default 64 [ 0.143251] Simple Boot Flag at 0x7f set to 0x1 [ 0.143592] audit: initializing netlink socket (disabled) [ 0.143605] type=2000 audit(1341925846.136:1): initialized [ 0.169925] Trying to unpack rootfs image as initramfs... [ 0.202746] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.210544] VFS: Disk quotas dquot_6.5.2 [ 0.210628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.211352] fuse init (API version 7.17) [ 0.211471] msgmni has been set to 944 [ 0.224365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.224413] io scheduler noop registered [ 0.224416] io scheduler deadline registered [ 0.224425] io scheduler cfq registered (default) [ 0.224595] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.224658] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.224746] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.224797] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.224907] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.224939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.225173] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.225257] ACPI: AC Adapter [AC] (on-line) [ 0.225349] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.225379] ACPI: Lid Switch [LID] [ 0.225442] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.225448] ACPI: Power Button [PWRB] [ 0.225508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.225512] ACPI: Power Button [PWRF] [ 0.225579] Marking TSC unstable due to TSC halts in idle [ 0.225591] ACPI: acpi_idle registered with cpuidle [ 0.227450] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.227462] ACPI: Battery Slot [CMB1] (battery present) [ 0.227578] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.227585] ACPI: Battery Slot [CMB2] (battery absent) [ 0.227611] ERST: Table is not found! [ 0.227613] GHES: HEST is not enabled! [ 0.227714] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.248250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.248975] ACPI: Battery Slot [CMB1] (battery present) [ 0.249001] ACPI: Battery Slot [CMB2] (battery absent) [ 0.249020] isapnp: Scanning for PnP cards... [ 0.341061] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 0.384527] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.448536] Linux agpgart interface v0.103 [ 0.448633] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 0.448693] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 0.449633] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.449784] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 0.457605] brd: module loaded [ 0.458561] loop: module loaded [ 0.458721] ahci 0000:00:1f.2: version 3.0 [ 0.458738] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.458775] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 0.458853] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode [ 0.458858] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part [ 0.458864] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.459636] scsi0 : ahci [ 0.459741] scsi1 : ahci [ 0.464209] scsi2 : ahci [ 0.464324] scsi3 : ahci [ 0.464493] ata1: SATA max UDMA/133 abar m1024@0xb0004400 port 0xb0004500 irq 19 [ 0.464497] ata2: SATA max UDMA/133 abar m1024@0xb0004400 port 0xb0004580 irq 19 [ 0.464501] ata3: SATA max UDMA/133 abar m1024@0xb0004400 port 0xb0004600 irq 19 [ 0.464506] ata4: SATA max UDMA/133 abar m1024@0xb0004400 port 0xb0004680 irq 19 [ 0.464577] ata_piix 0000:00:1f.1: version 2.13 [ 0.464596] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.464643] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.465110] scsi4 : ata_piix [ 0.465220] scsi5 : ata_piix [ 0.465750] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1410 irq 14 [ 0.465754] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1418 irq 15 [ 0.466258] Fixed MDIO Bus: probed [ 0.466285] tun: Universal TUN/TAP device driver, 1.6 [ 0.466287] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.466365] PPP generic driver version 2.4.2 [ 0.466499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.466521] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.466544] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.466549] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.466601] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.466636] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.470536] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.476411] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 [ 0.480468] ata6: port disabled--ignoring [ 0.531581] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.608364] hub 1-0:1.0: USB hub found [ 0.608374] hub 1-0:1.0: 8 ports detected [ 0.608502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.608526] uhci_hcd: USB Universal Host Controller Interface driver [ 0.608578] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.608595] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.608599] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.612395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.612435] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001420 [ 0.612631] hub 2-0:1.0: USB hub found [ 0.612637] hub 2-0:1.0: 2 ports detected [ 0.612733] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.612746] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.612750] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.612805] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.612834] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001440 [ 0.612993] hub 3-0:1.0: USB hub found [ 0.612998] hub 3-0:1.0: 2 ports detected [ 0.613075] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.613085] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.613089] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.613134] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.613177] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001460 [ 0.613341] hub 4-0:1.0: USB hub found [ 0.613346] hub 4-0:1.0: 2 ports detected [ 0.613420] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.613429] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.613433] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.613486] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.613525] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001480 [ 0.613681] hub 5-0:1.0: USB hub found [ 0.613685] hub 5-0:1.0: 2 ports detected [ 0.613842] usbcore: registered new interface driver libusual [ 0.613909] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.616462] i8042: Detected active multiplexing controller, rev 1.1 [ 0.621497] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.621511] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.621567] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.621600] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.621636] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.621793] mousedev: PS/2 mouse device common for all mice [ 0.622006] rtc_cmos 00:04: RTC can wake from S4 [ 0.622143] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.622177] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.622294] device-mapper: uevent: version 1.0.3 [ 0.622387] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.622435] EISA: Probing bus 0 at eisa.0 [ 0.622444] Cannot allocate resource for EISA slot 1 [ 0.622448] Cannot allocate resource for EISA slot 2 [ 0.622451] Cannot allocate resource for EISA slot 3 [ 0.622453] Cannot allocate resource for EISA slot 4 [ 0.622472] EISA: Detected 0 cards. [ 0.622486] cpufreq-nforce2: No nForce2 chipset. [ 0.622531] cpuidle: using governor ladder [ 0.622599] cpuidle: using governor menu [ 0.622602] EFI Variables Facility v0.08 2004-May-17 [ 0.622894] TCP cubic registered [ 0.623059] NET: Registered protocol family 10 [ 0.623706] NET: Registered protocol family 17 [ 0.623712] Registering the dns_resolver key type [ 0.623739] Using IPI No-Shortcut mode [ 0.624745] PM: Hibernation image not present or could not be loaded. [ 0.624766] registered taskstats version 1 [ 0.815670] isapnp: No Plug & Play device found [ 0.852110] ata5.00: ATAPI: MATSHITAUJ-831Db, 1.00, max UDMA/33 [ 0.852238] ata3: SATA link down (SStatus 0 SControl 300) [ 0.852400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.860476] ata5.00: configured for UDMA/33 [ 1.016343] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.018398] Freeing initrd memory: 13800k freed [ 1.031693] ata1.00: ATA-7: SAMSUNG HM060II, YB100-04, max UDMA7 [ 1.031699] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.036952] Magic number: 4:750:179 [ 1.037056] acpi device:0f: hash matches [ 1.056964] rtc_cmos 00:04: setting system clock to 2012-07-10 13:10:48 UTC (1341925848) [ 1.057255] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.057257] EDD information not available. [ 1.057483] ata1.00: configured for UDMA/133 [ 1.057649] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM060II YB10 PQ: 0 ANSI: 5 [ 1.057879] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.057940] sd 0:0:0:0: [sda] Write Protect is off [ 1.057944] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.057970] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.058303] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.188397] sda: sda1 sda2 < sda5 sda6 > [ 1.188805] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.492066] ata2: failed to resume link (SControl 0) [ 1.492082] ata2: SATA link down (SStatus 0 SControl 0) [ 1.540061] ata4: failed to resume link (SControl 0) [ 1.540075] ata4: SATA link down (SStatus 0 SControl 0) [ 1.541956] scsi 4:0:0:0: CD-ROM MATSHITA UJ-831Db 1.00 PQ: 0 ANSI: 5 [ 1.544216] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.544219] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.544342] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.544493] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.544561] Freeing unused kernel memory: 712k freed [ 1.544940] Write protecting the kernel text: 5616k [ 1.545010] Write protecting the kernel read-only data: 2324k [ 1.561110] udevd[91]: starting version 175 [ 1.703273] tg3.c:v3.121 (November 2, 2011) [ 1.703294] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.703307] tg3 0000:02:00.0: setting latency timer to 64 [ 1.747455] sdhci: Secure Digital Host Controller Interface driver [ 1.747459] sdhci: Copyright(c) Pierre Ossman [ 1.747785] sdhci-pci 0000:06:03.4: SDHCI controller found [104c:8034] (rev 0) [ 1.747806] sdhci-pci 0000:06:03.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.747860] mmc0: no vmmc regulator found [ 1.747897] Registered led device: mmc0:: [ 1.759716] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:0b:5d:94:5e:c2 [ 1.759723] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.759727] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.759731] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.773526] mmc0: SDHCI controller on PCI [0000:06:03.4] using PIO [ 1.773570] mmc1: no vmmc regulator found [ 1.773609] Registered led device: mmc1:: [ 1.778789] mmc1: SDHCI controller on PCI [0000:06:03.4] using PIO [ 1.778815] mmc2: no vmmc regulator found [ 1.778848] Registered led device: mmc2:: [ 1.795016] mmc2: SDHCI controller on PCI [0000:06:03.4] using PIO [ 1.795052] firewire_ohci 0000:06:03.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 1.849109] firewire_ohci: Added fw-ohci device 0000:06:03.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.218841] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.348152] firewire_core: created device fw0: GUID 00000e100350fb96, S400 [ 18.283401] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.846131] udevd[324]: starting version 175 [ 18.909026] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k [ 18.917276] lp: driver loaded but no devices found [ 19.005453] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 19.066291] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:06/FUJ02B1:00/input/input5 [ 19.066377] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 19.076184] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on) [ 19.087741] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input6 [ 19.092318] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on) [ 19.092536] fujitsu_laptop: BTNI: [0xff0101] [ 19.092791] fujitsu_laptop: driver 0.6.0 successfully loaded [ 19.167859] parport_pc 00:0b: reported by Plug and Play ACPI [ 19.167902] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 19.187833] [drm] Initialized drm 1.1.0 20060810 [ 19.219691] type=1400 audit(1341925866.656:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 19.224832] type=1400 audit(1341925866.664:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 19.225515] type=1400 audit(1341925866.664:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 19.226193] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.227771] irda_init() [ 19.228932] NET: Registered protocol family 23 [ 19.237256] nf_conntrack version 0.5.0 (7786 buckets, 31144 max) [ 19.260116] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 19.262241] intel_rng: FWH not detected [ 19.262328] lp0: using parport0 (interrupt-driven). [ 19.263539] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227 [ 19.263562] smsc_superio_flat(): fir: 0x400, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e [ 19.263566] smsc_ircc_present: can't get sir_base of 0x2e8 [ 19.333821] lib80211: common routines for IEEE802.11 drivers [ 19.333826] lib80211_crypt: registered algorithm 'NULL' [ 19.360818] yenta_cardbus 0000:06:03.0: CardBus bridge found [10cf:12d2] [ 19.360840] yenta_cardbus 0000:06:03.0: Enabling burst memory read transactions [ 19.360847] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI [ 19.360850] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI [ 19.360857] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01c01b22, devctl 0x65 [ 19.364633] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 19.365608] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.365616] i915 0000:00:02.0: setting latency timer to 64 [ 19.396448] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.396452] [drm] Driver supports precise vblank timestamp query. [ 19.397111] cfg80211: Calling CRDA to update world regulatory domain [ 19.440768] libipw: 802.11 data/management/control stack, git-1.1.13 [ 19.440774] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 19.466763] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.466767] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 19.579325] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 19.592885] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0c78, PCI irq 16 [ 19.592891] yenta_cardbus 0000:06:03.0: Socket status: 30000006 [ 19.592896] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 19.592908] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff] [ 19.592912] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff [ 19.692740] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0200000-0xb02fffff] [ 19.692746] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0200000-0xb02fffff: excluding 0xb0200000-0xb020ffff [ 19.692762] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x24000000-0x27ffffff pref] [ 19.692766] pcmcia_socket pcmcia_socket0: cs: memory probe 0x24000000-0x27ffffff: excluding 0x24000000-0x27ffffff [ 19.702043] tifm_7xx1 0000:06:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 19.705632] ipw2200 0000:06:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.705660] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 19.760840] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 19.850465] ppdev: user-space parallel port driver [ 19.930279] cfg80211: World regulatory domain updated: [ 19.930283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.930287] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.930291] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.930294] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.930298] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.930301] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.142534] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0xf8eb1, caps: 0xa04793/0x102000/0x0 [ 20.142542] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 20.184921] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 20.559414] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2e8-0x2ef 0x370-0x37f [ 20.561089] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x407 0x4d0-0x4d7 [ 20.561772] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 20.562358] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 20.563001] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xdc000-0xfffff [ 20.563033] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 20.563064] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 20.563095] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 20.665041] [drm] initialized overlay support [ 20.747029] cfg80211: failed to add phy80211 symlink to netdev! [ 20.749191] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 20.749196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749200] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 20.749203] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749206] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 20.749210] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749213] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 20.749217] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749220] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 20.749223] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749226] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 20.749230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749233] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 20.749237] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749240] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 20.749243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749246] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 20.749250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749253] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 20.749257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749260] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 20.749263] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.749267] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 20.749270] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.749273] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 20.749277] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.749280] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 20.749284] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.749466] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 20.943291] init: failsafe main process (769) killed by TERM signal [ 20.997218] Bluetooth: Core ver 2.16 [ 20.997326] NET: Registered protocol family 31 [ 20.997330] Bluetooth: HCI device and connection manager initialized [ 20.997333] Bluetooth: HCI socket layer initialized [ 20.997336] Bluetooth: L2CAP socket layer initialized [ 20.997768] Bluetooth: SCO socket layer initialized [ 21.007376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.007380] Bluetooth: BNEP filters: protocol multicast [ 21.119056] type=1400 audit(1341925868.556:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=820 comm="apparmor_parser" [ 21.119746] type=1400 audit(1341925868.556:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=820 comm="apparmor_parser" [ 21.135719] Bluetooth: RFCOMM TTY layer initialized [ 21.135727] Bluetooth: RFCOMM socket layer initialized [ 21.135729] Bluetooth: RFCOMM ver 1.11 [ 21.209936] fbcon: inteldrmfb (fb0) is primary device [ 21.223516] Console: switching to colour frame buffer device 160x50 [ 21.223563] fb0: inteldrmfb frame buffer device [ 21.223565] drm: registered panic notifier [ 21.223636] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 21.223693] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.223784] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 21.223819] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 21.570485] type=1400 audit(1341925869.008:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=883 comm="apparmor_parser" [ 21.589506] type=1400 audit(1341925869.028:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=888 comm="apparmor_parser" [ 21.604074] type=1400 audit(1341925869.044:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=888 comm="apparmor_parser" [ 21.604413] type=1400 audit(1341925869.044:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=888 comm="apparmor_parser" [ 21.685104] type=1400 audit(1341925869.124:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=894 comm="apparmor_parser" [ 21.816566] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.817232] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.065128] psmouse serio5: hgpk: ID: 10 00 64 [ 23.163938] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 23.163942] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 23.164018] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.960388] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 34.168056] eth0: no IPv6 routers present @bsn: Der Router und der Laptop gehören einer Bekannten. Sie hat leider das Passwort für den Router verlegt, sodass ich die Einstellungen dort leider ändern kann. Bis vor kurzem war auf diesem Laptop jedoch Win XP drauf und er konnte sich immer mit dem Router verbinden und kam dann ins WWW. Hat das Verschlüsselungsproblem etwas mit dem OS oder mit der Hardware zu tun?
bsn Anmeldungsdatum: Sept. 17, 2006 Beiträge: 6002 Wohnort: Baden-Württemberg	Zitieren 10. Juli 2012 16:16 Hallo, elchfan schrieb: Hat das Verschlüsselungsproblem etwas mit dem OS oder mit der Hardware zu tun? [htt Es hat mehr mit dem Netzwerk-Manger zu tun der manchmal mit gemischter Verschlüsselung nicht klar kommt! Du kannst es mit dem Wicd versuchen lese aber bitte das Wiki ganz! Gruß bsn
elchfan (Themenstarter) Anmeldungsdatum: Nov. 22, 2006 Beiträge: 133 Wohnort: @~/	Zitieren 10. Juli 2012 18:17 Hallo bsn, vielen Dank für den Tipp mit wicd. Das war die Lösung.

« Zurück1Weiter »

Antworten |

« Vorheriges Thema Nächstes Thema »

ubuntuusers.de › Forum › Netzwerk und Internetzugang einrichten › WLAN vorhanden, verbindet nicht