Habe die -f Option gespielt, hier das Ergebnis:
wpa_supplicant v1.0
random: Trying to read entropy from /dev/random
Initializing interface 'wlan0' conf '/wpa_supplicant.tmp' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/wpa_supplicant.tmp' -> '/wpa_supplicant.tmp'
Reading configuration file '/wpa_supplicant.tmp'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
Line 6: Invalid BSSID 'XX:XX:XX:XX:XX:XX'.
Line 6: failed to parse bssid 'XX:XX:XX:XX:XX:XX'.
Line 12: failed to parse network block.
Failed to read or parse configuration '/wpa_supplicant.tmp'.
Failed to add interface wlan0
: Cancelling scan request
: Cancelling authentication timeout
Der dmesg-Test hat folgendes ergeben:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-6-generic (buildd@roseapple) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-5ubuntu1) ) #6-Ubuntu SMP Mon Jul 23 19:53:07 UTC 2012 (Ubuntu 3.5.0-6.6-generic 3.5.0)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce773fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce774000-0x00000000ce834fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ce835000-0x00000000cfac8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfac9000-0x00000000cfacafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfacb000-0x00000000cfb8cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfb8d000-0x00000000cfbe4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfbe5000-0x00000000cfbe9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfbea000-0x00000000cfbf2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfbf3000-0x00000000cfbf3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfbf4000-0x00000000cfbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfbff000-0x00000000cfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: /DP35DP, BIOS DPP3510J.86A.0407.2008.0218.0923 02/18/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x12c000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFC00000 mask FFFC00000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3324MB, range: 4MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 2GB, type WB
[ 0.000000] total RAM covered: 9468M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3324MB, range: 4MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 2GB, type WB
[ 0.000000] e820: update [mem 0xcfc00000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [c00fe200]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x36460000-0x37227fff]
[ 0.000000] ACPI: RSDP 000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT cfbfd038 0005C (v01 INTEL DP35DP 00000197 01000013)
[ 0.000000] ACPI: FACP cfbfc000 00074 (v01 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: DSDT cfbf8000 03DAD (v01 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: FACS cfb98000 00040
[ 0.000000] ACPI: APIC cfbf7000 00078 (v01 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: WDDT cfbf6000 00040 (v01 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: MCFG cfbf5000 0003C (v01 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: ASF! cfbf4000 000A6 (v32 INTEL DP35DP 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbf2000 00204 (v01 INTEL CpuPm 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbf1000 00301 (v01 INTEL Cpu0Ist 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbf0000 00301 (v01 INTEL Cpu1Ist 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbef000 00301 (v01 INTEL Cpu2Ist 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbee000 00301 (v01 INTEL Cpu3Ist 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbed000 000DD (v01 INTEL Cpu0Cst 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbec000 000DD (v01 INTEL Cpu1Cst 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbeb000 000DD (v01 INTEL Cpu2Cst 00000197 MSFT 01000013)
[ 0.000000] ACPI: SSDT cfbea000 000DD (v01 INTEL Cpu3Cst 00000197 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3908MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x2bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xce773fff]
[ 0.000000] node 0: [mem 0xce835000-0xcfac8fff]
[ 0.000000] node 0: [mem 0xcfacb000-0xcfb8cfff]
[ 0.000000] node 0: [mem 0xcfbe5000-0xcfbe9fff]
[ 0.000000] node 0: [mem 0xcfbf3000-0xcfbf3fff]
[ 0.000000] node 0: [mem 0xcfbff000-0xcfbfffff]
[ 0.000000] node 0: [mem 0x00000000-0x2bffffff]
[ 0.000000] On node 0 totalpages: 1030752
[ 0.000000] free_area_init_node: node 0, pgdat c18964c0, node_mem_map f3ee0200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7817 pages used for memmap
[ 0.000000] HighMem zone: 794698 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34112 r0 d23232 u57344
[ 0.000000] pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021151
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-6-generic root=UUID=9ff85bbe-a825-4141-bf1f-d266cf6f8084 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 9830272 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0012c000)
[ 0.000000] Memory: 4049228k/4915200k available (5921k kernel code, 73780k reserved, 2925k data, 752k init, 3210060k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc18a4000 - 0xc1960000 ( 752 kB)
[ 0.000000] .data : 0xc15c8418 - 0xc18a3980 (2925 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15c8418 (5921 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2600.104 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.20 BogoMIPS (lpj=10400416)
[ 0.008005] pid_max: default: 32768 minimum: 301
[ 0.008025] Security Framework initialized
[ 0.008038] AppArmor: AppArmor initialized
[ 0.008039] Yama: becoming mindful.
[ 0.008080] Mount-cache hash table entries: 512
[ 0.012051] Initializing cgroup subsys cpuacct
[ 0.012053] Initializing cgroup subsys memory
[ 0.012060] Initializing cgroup subsys devices
[ 0.012061] Initializing cgroup subsys freezer
[ 0.012063] Initializing cgroup subsys blkio
[ 0.012065] Initializing cgroup subsys perf_event
[ 0.012090] CPU: Physical Processor ID: 0
[ 0.012091] CPU: Processor Core ID: 0
[ 0.012093] mce: CPU supports 6 MCE banks
[ 0.012100] CPU0: Thermal monitoring enabled (TM2)
[ 0.012102] using mwait in idle threads.
[ 0.013910] ACPI: Core revision 20120320
[ 0.019862] ftrace: allocating 24485 entries in 48 pages
[ 0.028063] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071033] CPU0: Intel(R) Core(TM)2 Duo CPU E4700 @ 2.60GHz stepping 0b
[ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072003] PEBS disabled due to CPU errata.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072003] CPU 1 irqstacks, hard=f7506000 soft=f7510000
[ 0.012000] Initializing CPU#1
[ 0.072003] Booting Node 0, Processors #1
[ 0.080068] Brought up 2 CPUs
[ 0.080072] Total of 2 processors activated (10400.41 BogoMIPS).
[ 0.081186] devtmpfs: initialized
[ 0.081186] EVM: security.selinux
[ 0.081186] EVM: security.SMACK64
[ 0.081186] EVM: security.capability
[ 0.081186] PM: Registering ACPI NVS region [mem 0xce774000-0xce834fff] (790528 bytes)
[ 0.081186] PM: Registering ACPI NVS region [mem 0xcfb8d000-0xcfbe4fff] (360448 bytes)
[ 0.081186] dummy:
[ 0.081186] RTC time: 22:07:32, date: 07/24/12
[ 0.081186] NET: Registered protocol family 16
[ 0.084031] Trying to unpack rootfs image as initramfs...
[ 0.081186] EISA bus registered
[ 0.081255] ACPI: bus type pci registered
[ 0.081317] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.081319] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.081320] PCI: Using MMCONFIG for extended config space
[ 0.081322] PCI: Using configuration type 1 for base access
[ 0.082324] bio: create slab <bio-0> at 0
[ 0.082405] ACPI: Added _OSI(Module Device)
[ 0.082407] ACPI: Added _OSI(Processor Device)
[ 0.082409] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082411] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084849] ACPI: EC: Look up EC in DSDT
[ 0.087258] ACPI: Interpreter enabled
[ 0.087267] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.087286] ACPI: Using IOAPIC for interrupt routing
[ 0.090738] ACPI: No dock devices found.
[ 0.090745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.091365] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092558] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.092561] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.092563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.092565] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.092567] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff]
[ 0.092570] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff]
[ 0.092604] PCI host bridge to bus 0000:00
[ 0.092607] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.092609] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.092611] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.092613] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.092615] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
[ 0.092617] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
[ 0.092628] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.092677] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.092722] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.092740] pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000
[ 0.092755] pci 0000:00:03.0: reg 10: [mem 0xe0325900-0xe032590f 64bit]
[ 0.092800] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.092844] pci 0000:00:19.0: [8086:294c] type 00 class 0x020000
[ 0.092862] pci 0000:00:19.0: reg 10: [mem 0xe0300000-0xe031ffff]
[ 0.092871] pci 0000:00:19.0: reg 14: [mem 0xe0324000-0xe0324fff]
[ 0.092879] pci 0000:00:19.0: reg 18: [io 0x40e0-0x40ff]
[ 0.092943] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.092963] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.093005] pci 0000:00:1a.0: reg 20: [io 0x40c0-0x40df]
[ 0.093056] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.093098] pci 0000:00:1a.1: reg 20: [io 0x40a0-0x40bf]
[ 0.093149] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.093192] pci 0000:00:1a.2: reg 20: [io 0x4080-0x409f]
[ 0.093251] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.093272] pci 0000:00:1a.7: reg 10: [mem 0xe0325400-0xe03257ff]
[ 0.093360] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.093386] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.093402] pci 0000:00:1b.0: reg 10: [mem 0xe0320000-0xe0323fff 64bit]
[ 0.093470] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.093492] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.093560] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.093582] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.093653] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.093676] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.093744] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.093767] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.093836] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.093860] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.093931] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.093957] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.093999] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
[ 0.094050] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.094091] pci 0000:00:1d.1: reg 20: [io 0x4040-0x405f]
[ 0.094143] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.094186] pci 0000:00:1d.2: reg 20: [io 0x4020-0x403f]
[ 0.094246] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.094267] pci 0000:00:1d.7: reg 10: [mem 0xe0325000-0xe03253ff]
[ 0.094356] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.094378] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.094441] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.094525] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.094537] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.094540] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[ 0.094586] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.094601] pci 0000:00:1f.2: reg 10: [io 0x4458-0x445f]
[ 0.094609] pci 0000:00:1f.2: reg 14: [io 0x446c-0x446f]
[ 0.094617] pci 0000:00:1f.2: reg 18: [io 0x4450-0x4457]
[ 0.094625] pci 0000:00:1f.2: reg 1c: [io 0x4468-0x446b]
[ 0.094634] pci 0000:00:1f.2: reg 20: [io 0x4430-0x443f]
[ 0.094643] pci 0000:00:1f.2: reg 24: [io 0x4420-0x442f]
[ 0.094692] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.094707] pci 0000:00:1f.3: reg 10: [mem 0xe0325800-0xe03258ff 64bit]
[ 0.094728] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.094761] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.094776] pci 0000:00:1f.5: reg 10: [io 0x4448-0x444f]
[ 0.094784] pci 0000:00:1f.5: reg 14: [io 0x4464-0x4467]
[ 0.094792] pci 0000:00:1f.5: reg 18: [io 0x4440-0x4447]
[ 0.094799] pci 0000:00:1f.5: reg 1c: [io 0x4460-0x4463]
[ 0.094807] pci 0000:00:1f.5: reg 20: [io 0x4410-0x441f]
[ 0.094815] pci 0000:00:1f.5: reg 24: [io 0x4400-0x440f]
[ 0.094893] pci 0000:01:00.0: [1002:715f] type 00 class 0x030000
[ 0.094906] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.094917] pci 0000:01:00.0: reg 18: [mem 0xe0200000-0xe020ffff 64bit]
[ 0.094925] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 0.094938] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.094972] pci 0000:01:00.0: supports D1 D2
[ 0.094991] pci 0000:01:00.1: [1002:717f] type 00 class 0x038000
[ 0.095004] pci 0000:01:00.1: reg 10: [mem 0xe0210000-0xe021ffff 64bit]
[ 0.095056] pci 0000:01:00.1: supports D1 D2
[ 0.095069] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.095077] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.095081] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.095084] pci 0000:00:01.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.095088] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.095126] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.095190] pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f
[ 0.095207] pci 0000:03:00.0: reg 10: [io 0x2018-0x201f]
[ 0.095219] pci 0000:03:00.0: reg 14: [io 0x2024-0x2027]
[ 0.095231] pci 0000:03:00.0: reg 18: [io 0x2010-0x2017]
[ 0.095243] pci 0000:03:00.0: reg 1c: [io 0x2020-0x2023]
[ 0.095255] pci 0000:03:00.0: reg 20: [io 0x2000-0x200f]
[ 0.095267] pci 0000:03:00.0: reg 24: [mem 0xe0100000-0xe01001ff]
[ 0.095332] pci 0000:03:00.0: supports D1
[ 0.095334] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.095354] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.095362] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.095366] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.095370] pci 0000:00:1c.1: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.095414] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.095459] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.095504] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 0.095538] pci 0000:07:00.0: [1244:0a00] type 00 class 0x028000
[ 0.095552] pci 0000:07:00.0: reg 10: [mem 0xe0004800-0xe000481f]
[ 0.095561] pci 0000:07:00.0: reg 14: [io 0x1000-0x101f]
[ 0.095625] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.095642] pci 0000:07:03.0: reg 10: [mem 0xe0004000-0xe00047ff]
[ 0.095653] pci 0000:07:03.0: reg 14: [mem 0xe0000000-0xe0003fff]
[ 0.095724] pci 0000:07:03.0: supports D1 D2
[ 0.095726] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.095769] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.095773] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.095777] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.095783] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.095785] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.095787] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.095789] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[ 0.095791] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
[ 0.095793] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
[ 0.095820] pci_bus 0000:00: on NUMA node 0
[ 0.095825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.096031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.096167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.096210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.096252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.096293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.096334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.096417] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.096420] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.096422] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.102208] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102263] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.102315] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.102366] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.102468] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102518] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.102569] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102684] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.102689] vgaarb: loaded
[ 0.102690] vgaarb: bridge control possible 0000:01:00.0
[ 0.102889] SCSI subsystem initialized
[ 0.108106] libata version 3.00 loaded.
[ 0.108106] ACPI: bus type usb registered
[ 0.108106] usbcore: registered new interface driver usbfs
[ 0.108106] usbcore: registered new interface driver hub
[ 0.108107] usbcore: registered new device driver usb
[ 0.108193] PCI: Using ACPI for IRQ routing
[ 0.109774] PCI: pci_cache_line_size set to 64 bytes
[ 0.109877] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.109879] e820: reserve RAM buffer [mem 0xce774000-0xcfffffff]
[ 0.109883] e820: reserve RAM buffer [mem 0xcfac9000-0xcfffffff]
[ 0.109885] e820: reserve RAM buffer [mem 0xcfb8d000-0xcfffffff]
[ 0.109888] e820: reserve RAM buffer [mem 0xcfbea000-0xcfffffff]
[ 0.109890] e820: reserve RAM buffer [mem 0xcfbf4000-0xcfffffff]
[ 0.109892] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff]
[ 0.109993] NetLabel: Initializing
[ 0.109994] NetLabel: domain hash size = 128
[ 0.109995] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.110007] NetLabel: unlabeled traffic allowed by default
[ 0.110197] hpet clockevent registered
[ 0.110200] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.110205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.110211] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.116262] Switching to clocksource hpet
[ 0.123590] AppArmor: AppArmor Filesystem Enabled
[ 0.123624] pnp: PnP ACPI init
[ 0.123641] ACPI: bus type pnp registered
[ 0.124322] pnp 00:00: [bus 00-ff]
[ 0.124325] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.124328] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.124330] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.124332] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.124334] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.124337] pnp 00:00: [mem 0xf8000000-0xfeafffff window]
[ 0.124339] pnp 00:00: [mem 0xd0000000-0xefffffff window]
[ 0.124395] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.124407] pnp 00:01: [mem 0xf0000000-0xf7ffffff]
[ 0.124409] pnp 00:01: [mem 0xfeb00000-0xfeb03fff]
[ 0.124411] pnp 00:01: [mem 0xfed13000-0xfed13fff]
[ 0.124413] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.124415] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.124417] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.124419] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.124421] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.124423] pnp 00:01: [mem 0xfed45000-0xfed99fff]
[ 0.124425] pnp 00:01: [mem 0x000c0000-0x000dffff]
[ 0.124426] pnp 00:01: [mem 0x000e0000-0x000fffff]
[ 0.124428] pnp 00:01: [mem 0xffc00000-0xffffffff]
[ 0.124487] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.124490] system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.124493] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.124495] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.124498] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.124500] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.124503] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.124505] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.124508] system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved
[ 0.124510] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.124512] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.124515] system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.124518] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124628] pnp 00:02: [io 0x0000-0x000f]
[ 0.124630] pnp 00:02: [io 0x0081-0x0083]
[ 0.124632] pnp 00:02: [io 0x0087]
[ 0.124634] pnp 00:02: [io 0x0089-0x008b]
[ 0.124635] pnp 00:02: [io 0x008f]
[ 0.124637] pnp 00:02: [io 0x00c0-0x00df]
[ 0.124640] pnp 00:02: [dma 4]
[ 0.124667] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.124676] pnp 00:03: [io 0x0070-0x0071]
[ 0.124678] pnp 00:03: [io 0x0074-0x0077]
[ 0.124693] pnp 00:03: [irq 8]
[ 0.124717] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.124728] pnp 00:04: [io 0x00f0]
[ 0.124733] pnp 00:04: [irq 13]
[ 0.124757] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.124767] pnp 00:05: [io 0x0061]
[ 0.124794] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.124804] pnp 00:06: [io 0x0500-0x053f]
[ 0.124806] pnp 00:06: [io 0x0400-0x047f]
[ 0.124808] pnp 00:06: [io 0x0092]
[ 0.124810] pnp 00:06: [io 0x0680-0x06ff]
[ 0.124812] pnp 00:06: [io 0x0010-0x001f]
[ 0.124814] pnp 00:06: [io 0x0072-0x0073]
[ 0.124815] pnp 00:06: [io 0x0080]
[ 0.124817] pnp 00:06: [io 0x0084-0x0086]
[ 0.124819] pnp 00:06: [io 0x0088]
[ 0.124821] pnp 00:06: [io 0x008c-0x008e]
[ 0.124823] pnp 00:06: [io 0x0090-0x009f]
[ 0.124874] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.124876] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.124879] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.124882] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124922] pnp 00:07: [io 0x0060]
[ 0.124924] pnp 00:07: [io 0x0064]
[ 0.124971] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125220] pnp 00:08: [mem 0xfec00000-0xfec000ff]
[ 0.125250] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.125301] pnp: PnP ACPI: found 9 devices
[ 0.125302] ACPI: ACPI bus type pnp unregistered
[ 0.125305] PnPBIOS: Disabled by ACPI PNP
[ 0.161278] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.161317] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.161321] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.161324] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.161333] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.161341] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
[ 0.161344] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[ 0.161346] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
[ 0.161354] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
[ 0.161357] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
[ 0.161360] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000
[ 0.161368] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06-06] add_size 1000
[ 0.161371] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000
[ 0.161373] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
[ 0.161392] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.161395] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.161397] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.161400] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.161402] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.161404] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.161407] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.161409] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.161411] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.161414] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.161416] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.161418] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.161421] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.161426] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.161429] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.161433] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.161436] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8600000-0xf87fffff]
[ 0.161439] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.161442] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8a00000-0xf8bfffff]
[ 0.161445] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8c00000-0xf8dfffff 64bit pref]
[ 0.161448] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8e00000-0xf8ffffff]
[ 0.161451] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9000000-0xf91fffff 64bit pref]
[ 0.161454] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.161458] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.161460] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.161464] pci 0000:00:1c.4: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.161468] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0220000-0xe023ffff pref]
[ 0.161471] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.161474] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.161478] pci 0000:00:01.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.161481] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.161486] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.161488] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.161493] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.161497] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.161503] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.161506] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.161510] pci 0000:00:1c.1: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.161514] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.161520] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.161523] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.161527] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf87fffff]
[ 0.161531] pci 0000:00:1c.2: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.161537] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.161540] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
[ 0.161544] pci 0000:00:1c.3: bridge window [mem 0xf8a00000-0xf8bfffff]
[ 0.161548] pci 0000:00:1c.3: bridge window [mem 0xf8c00000-0xf8dfffff 64bit pref]
[ 0.161554] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 0.161557] pci 0000:00:1c.4: bridge window [io 0x8000-0x8fff]
[ 0.161561] pci 0000:00:1c.4: bridge window [mem 0xf8e00000-0xf8ffffff]
[ 0.161565] pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xf91fffff 64bit pref]
[ 0.161571] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.161574] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.161578] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.161608] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.161626] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.161636] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.161646] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.161655] pci 0000:00:1e.0: setting latency timer to 64
[ 0.161659] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.161662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.161664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.161666] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
[ 0.161668] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
[ 0.161670] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xefffffff]
[ 0.161672] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.161674] pci_bus 0000:01: resource 1 [mem 0xe0200000-0xe02fffff]
[ 0.161676] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.161679] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.161681] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.161683] pci_bus 0000:02: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.161685] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.161687] pci_bus 0000:03: resource 1 [mem 0xe0100000-0xe01fffff]
[ 0.161689] pci_bus 0000:03: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
[ 0.161691] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
[ 0.161693] pci_bus 0000:04: resource 1 [mem 0xf8600000-0xf87fffff]
[ 0.161695] pci_bus 0000:04: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref]
[ 0.161697] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.161699] pci_bus 0000:05: resource 1 [mem 0xf8a00000-0xf8bfffff]
[ 0.161701] pci_bus 0000:05: resource 2 [mem 0xf8c00000-0xf8dfffff 64bit pref]
[ 0.161703] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 0.161705] pci_bus 0000:06: resource 1 [mem 0xf8e00000-0xf8ffffff]
[ 0.161707] pci_bus 0000:06: resource 2 [mem 0xf9000000-0xf91fffff 64bit pref]
[ 0.161709] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.161711] pci_bus 0000:07: resource 1 [mem 0xe0000000-0xe00fffff]
[ 0.161713] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.161715] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.161717] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.161719] pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff]
[ 0.161721] pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff]
[ 0.161723] pci_bus 0000:07: resource 9 [mem 0xd0000000-0xefffffff]
[ 0.161760] NET: Registered protocol family 2
[ 0.161820] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.161966] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.162375] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.162581] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.162583] TCP: reno registered
[ 0.162585] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.162594] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.162659] NET: Registered protocol family 1
[ 0.163097] pci 0000:01:00.0: Boot video device
[ 0.163109] PCI: CLS 64 bytes, default 64
[ 0.163506] audit: initializing netlink socket (disabled)
[ 0.163516] type=2000 audit(1343167651.156:1): initialized
[ 0.181685] highmem bounce pool size: 64 pages
[ 0.181700] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.183580] VFS: Disk quotas dquot_6.5.2
[ 0.183625] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.184106] fuse init (API version 7.19)
[ 0.184178] msgmni has been set to 1639
[ 0.184455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.184478] io scheduler noop registered
[ 0.184480] io scheduler deadline registered (default)
[ 0.184486] io scheduler cfq registered
[ 0.184640] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.184716] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.184805] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.184892] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.184976] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.185061] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 0.185133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.185152] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.185212] intel_idle: does not run on family 6 model 15
[ 0.185275] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.185280] ACPI: Sleep Button [SLPB]
[ 0.185323] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.185326] ACPI: Power Button [PWRF]
[ 0.185412] ACPI: Requesting acpi_cpufreq
[ 0.328828] Freeing initrd memory: 14112k freed
[ 0.335331] Monitor-Mwait will be used to enter C-1 state
[ 0.338590] GHES: HEST is not enabled!
[ 0.338617] isapnp: Scanning for PnP cards...
[ 0.340078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.340210] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.341127] Linux agpgart interface v0.103
[ 0.342526] brd: module loaded
[ 0.343154] loop: module loaded
[ 0.343279] ata_piix 0000:00:1f.2: version 2.13
[ 0.343294] ata_piix 0000:00:1f.2: MAP [
[ 0.343295] P0 P2 P1 P3 ]
[ 0.343338] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.343581] scsi0 : ata_piix
[ 0.343636] scsi1 : ata_piix
[ 0.343771] ata1: SATA max UDMA/133 cmd 0x4458 ctl 0x446c bmdma 0x4430 irq 21
[ 0.343775] ata2: SATA max UDMA/133 cmd 0x4450 ctl 0x4468 bmdma 0x4438 irq 21
[ 0.343791] ata_piix 0000:00:1f.5: MAP [
[ 0.343793] P0 -- P1 -- ]
[ 0.343825] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.344071] scsi2 : ata_piix
[ 0.344125] scsi3 : ata_piix
[ 0.344212] ata3: SATA max UDMA/133 cmd 0x4448 ctl 0x4464 bmdma 0x4410 irq 21
[ 0.344216] ata4: SATA max UDMA/133 cmd 0x4440 ctl 0x4460 bmdma 0x4418 irq 21
[ 0.344530] Fixed MDIO Bus: probed
[ 0.344572] tun: Universal TUN/TAP device driver, 1.6
[ 0.344573] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.344617] PPP generic driver version 2.4.2
[ 0.344651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.344684] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.344688] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.344693] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.344717] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.348591] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.348604] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0325400
[ 0.360011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.360032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.360034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.360036] usb usb1: Product: EHCI Host Controller
[ 0.360038] usb usb1: Manufacturer: Linux 3.5.0-6-generic ehci_hcd
[ 0.360040] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.360129] hub 1-0:1.0: USB hub found
[ 0.360133] hub 1-0:1.0: 6 ports detected
[ 0.360207] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.360211] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.360215] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.360237] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.364125] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.364137] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0325000
[ 0.376012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.376037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.376039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.376041] usb usb2: Product: EHCI Host Controller
[ 0.376043] usb usb2: Manufacturer: Linux 3.5.0-6-generic ehci_hcd
[ 0.376045] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.376120] hub 2-0:1.0: USB hub found
[ 0.376124] hub 2-0:1.0: 6 ports detected
[ 0.376188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.376206] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.376224] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.376227] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.376231] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.376261] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040c0
[ 0.376289] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.376291] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.376293] usb usb3: Product: UHCI Host Controller
[ 0.376295] usb usb3: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.376297] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.376370] hub 3-0:1.0: USB hub found
[ 0.376374] hub 3-0:1.0: 2 ports detected
[ 0.376436] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.376439] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.376444] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.376468] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0
[ 0.376494] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.376496] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.376498] usb usb4: Product: UHCI Host Controller
[ 0.376500] usb usb4: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.376502] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.376573] hub 4-0:1.0: USB hub found
[ 0.376577] hub 4-0:1.0: 2 ports detected
[ 0.376638] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.376641] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.376645] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.376665] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00004080
[ 0.376693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.376695] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.376697] usb usb5: Product: UHCI Host Controller
[ 0.376699] usb usb5: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.376701] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.376777] hub 5-0:1.0: USB hub found
[ 0.376780] hub 5-0:1.0: 2 ports detected
[ 0.376841] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.376844] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.376849] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.376869] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060
[ 0.376896] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.376898] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.376900] usb usb6: Product: UHCI Host Controller
[ 0.376902] usb usb6: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.376904] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.376973] hub 6-0:1.0: USB hub found
[ 0.376977] hub 6-0:1.0: 2 ports detected
[ 0.377036] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.377039] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.377043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.377071] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040
[ 0.377096] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.377098] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.377100] usb usb7: Product: UHCI Host Controller
[ 0.377102] usb usb7: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.377104] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.377175] hub 7-0:1.0: USB hub found
[ 0.377178] hub 7-0:1.0: 2 ports detected
[ 0.377238] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.377241] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.377245] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.377265] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020
[ 0.377291] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.377293] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.377295] usb usb8: Product: UHCI Host Controller
[ 0.377297] usb usb8: Manufacturer: Linux 3.5.0-6-generic uhci_hcd
[ 0.377299] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.377368] hub 8-0:1.0: USB hub found
[ 0.377371] hub 8-0:1.0: 2 ports detected
[ 0.377477] usbcore: registered new interface driver libusual
[ 0.377514] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.380580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.380585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.380676] mousedev: PS/2 mouse device common for all mice
[ 0.380775] rtc_cmos 00:03: RTC can wake from S4
[ 0.380874] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.380896] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.380941] device-mapper: uevent: version 1.0.3
[ 0.381000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.381026] EISA: Probing bus 0 at eisa.0
[ 0.381027] EISA: Cannot allocate resource for mainboard
[ 0.381029] Cannot allocate resource for EISA slot 1
[ 0.381030] Cannot allocate resource for EISA slot 2
[ 0.381032] Cannot allocate resource for EISA slot 3
[ 0.381033] Cannot allocate resource for EISA slot 4
[ 0.381034] Cannot allocate resource for EISA slot 5
[ 0.381036] Cannot allocate resource for EISA slot 6
[ 0.381037] Cannot allocate resource for EISA slot 7
[ 0.381038] Cannot allocate resource for EISA slot 8
[ 0.381040] EISA: Detected 0 cards.
[ 0.381062] cpufreq-nforce2: No nForce2 chipset.
[ 0.381064] cpuidle: using governor ladder
[ 0.381066] cpuidle: using governor menu
[ 0.381067] EFI Variables Facility v0.08 2004-May-17
[ 0.381206] ashmem: initialized
[ 0.381320] TCP: cubic registered
[ 0.381421] NET: Registered protocol family 10
[ 0.381591] NET: Registered protocol family 17
[ 0.381601] Key type dns_resolver registered
[ 0.381667] Using IPI No-Shortcut mode
[ 0.381736] PM: Hibernation image not present or could not be loaded.
[ 0.381748] registered taskstats version 1
[ 0.383926] Key type trusted registered
[ 0.385596] Key type encrypted registered
[ 0.387629] Magic number: 4:210:149
[ 0.387653] bdi 1:1: hash matches
[ 0.387715] rtc_cmos 00:03: setting system clock to 2012-07-24 22:07:32 UTC (1343167652)
[ 0.387986] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.387987] EDD information not available.
[ 0.678650] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.691533] isapnp: No Plug & Play device found
[ 0.732029] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 0.824064] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.848157] ata4.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
[ 0.864904] usb 1-4: New USB device found, idVendor=057c, idProduct=6201
[ 0.864910] usb 1-4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.864915] usb 1-4: Product: WLAN USB Device
[ 0.864919] usb 1-4: Manufacturer: AVM GmbH
[ 0.864923] usb 1-4: SerialNumber: 001F3F0E9AA6
[ 0.880170] ata4.00: configured for UDMA/100
[ 1.144128] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.144142] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.144258] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.144268] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.155069] ata1.00: ATA-7: ST3250410AS, 3.AAF, max UDMA/133
[ 1.155074] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.160156] Refined TSC clocksource calibration: 2600.092 MHz.
[ 1.160218] Switching to clocksource tsc
[ 1.160288] ata2.01: ATA-7: ST3250410AS, 3.AAF, max UDMA/133
[ 1.160293] ata2.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.168275] ata1.00: configured for UDMA/133
[ 1.168464] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
[ 1.168606] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.168636] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.168642] sd 0:0:0:0: [sda] Write Protect is off
[ 1.168645] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.168660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.176266] ata2.01: configured for UDMA/133
[ 1.217627] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.217987] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.218052] scsi 1:0:1:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
[ 1.218131] sd 1:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.218157] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 1.218164] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.218167] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.218182] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.238761] sdb: sdb1 sdb2
[ 1.238961] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.240149] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
[ 1.243128] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.243133] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.243282] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.243388] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.243468] Freeing unused kernel memory: 752k freed
[ 1.243737] Write protecting the kernel text: 5924k
[ 1.243752] Write protecting the kernel read-only data: 2420k
[ 1.243753] NX-protecting the kernel data: 4316k
[ 1.257788] udevd[101]: starting version 175
[ 1.288074] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.304183] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 1.304187] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 1.304228] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.304295] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.304332] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 1.319144] scsi4 : pata_marvell
[ 1.321313] scsi5 : pata_marvell
[ 1.321371] ata5: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
[ 1.321374] ata6: DUMMY
[ 1.420812] usb 2-1: New USB device found, idVendor=0ace, idProduct=1211
[ 1.420820] usb 2-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 1.420825] usb 2-1: Product: USB2.0 WLAN
[ 1.420830] usb 2-1: Manufacturer: ZyDAS
[ 1.544082] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.621987] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:60:30:e2
[ 1.621992] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.622014] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
[ 1.664040] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 1.843301] usb 3-2: New USB device found, idVendor=046d, idProduct=c312
[ 1.843308] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.843313] usb 3-2: Product: USB Multimedia Keyboard
[ 1.843318] usb 3-2: Manufacturer: BTC
[ 1.889410] usbcore: registered new interface driver usbhid
[ 1.889415] usbhid: USB HID core driver
[ 1.891827] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[ 1.891909] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/input0
[ 1.909407] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
[ 1.909549] hid-generic 0003:046D:C312.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/input1
[ 1.930723] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[ 1.930727] EXT4-fs (sda7): write access will be enabled during recovery
[ 2.044135] firewire_core 0000:07:03.0: created device fw0: GUID 00902700021e70eb, S400
[ 2.084051] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.255711] usb 5-1: New USB device found, idVendor=13ba, idProduct=0017
[ 2.255718] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.255723] usb 5-1: Product: Generic USB K/B
[ 2.274247] input: Generic USB K/B as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input4
[ 2.274383] hid-generic 0003:13BA:0017.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1a.2-1/input0
[ 2.293345] input: Generic USB K/B as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input5
[ 2.293450] hid-generic 0003:13BA:0017.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1a.2-1/input1
[ 2.846519] EXT4-fs (sda7): recovery complete
[ 2.854256] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 14.126982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.157892] udevd[343]: starting version 175
[ 14.166357] lp: driver loaded but no devices found
[ 14.186963] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 14.206643] mei 0000:00:03.0: setting latency timer to 64
[ 14.206687] mei 0000:00:03.0: irq 47 for MSI/MSI-X
[ 14.207499] mei 0000:00:03.0: wd: failed to find the client
[ 14.225599] [drm] Initialized drm 1.1.0 20060810
[ 14.275433] [drm] radeon defaulting to kernel modesetting.
[ 14.275437] [drm] radeon kernel modesetting enabled.
[ 14.302146] [drm] initializing kernel modesetting (RV515 0x1002:0x715F 0x1043:0x01CA).
[ 14.302176] [drm] register mmio base: 0xE0200000
[ 14.302178] [drm] register mmio size: 65536
[ 14.303815] ATOM BIOS: 715F.9.13.1.29.AS01
[ 14.303835] [drm] Generation 2 PCI interface, using max accessible memory
[ 14.303841] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
[ 14.303844] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 14.303864] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.303865] [drm] Driver supports precise vblank timestamp query.
[ 14.303888] [drm] radeon: irq initialized.
[ 14.306777] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \_SB_.PCI0.IGFX.TCOI 1 (20120320/utaddress-251)
[ 14.306785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.306787] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 14.306795] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \IGPO 1 (20120320/utaddress-251)
[ 14.306799] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.306800] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.310289] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.310293] [drm] RAM width 64bits DDR
[ 14.313293] [TTM] Zone kernel: Available graphics memory: 427016 kiB
[ 14.313297] [TTM] Zone highmem: Available graphics memory: 2032046 kiB
[ 14.313298] [TTM] Initializing pool allocator
[ 14.313302] [TTM] Initializing DMA pool allocator
[ 14.313328] [drm] radeon: 128M of VRAM memory ready
[ 14.313329] [drm] radeon: 512M of GTT memory ready.
[ 14.313349] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.315207] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 14.316146] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 14.338513] Modular ISDN core version 1.1.29
[ 14.338604] NET: Registered protocol family 34
[ 14.338931] mISDNipac module version 2.0
[ 14.339149] AVM Fritz PCI driver Rev. 2.3
[ 14.339176] mISDN: found adapter Fritz!Card PCI at 0000:07:00.0
[ 14.339182] AVM.1: AVM Fritz!CARD PCI config irq:21 base:0x1000
[ 14.360027] AVM 1 cards installed DEBUG
[ 14.363851] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 14.367522] radeon 0000:01:00.0: WB enabled
[ 14.367528] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffd31000
[ 14.367578] [drm] Loading R500 Microcode
[ 14.369797] HiSax: Linux Driver for passive ISDN cards
[ 14.369800] HiSax: Version 3.5 (module)
[ 14.369802] HiSax: Layer1 Revision 2.46.2.5
[ 14.369803] HiSax: Layer2 Revision 2.30.2.4
[ 14.369805] HiSax: TeiMgr Revision 2.20.2.3
[ 14.369806] HiSax: Layer3 Revision 2.22.2.3
[ 14.369807] HiSax: LinkLayer Revision 2.59.2.4
[ 14.370255] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
[ 14.370462] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
[ 14.370469] Error: Driver 'fcpci' is already registered, aborting...
[ 14.402313] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[ 14.416939] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 14.583694] cfg80211: Calling CRDA to update world regulatory domain
[ 14.594404] [drm] radeon: ring at 0x0000000010001000
[ 14.594443] [drm] ring test succeeded in 11 usecs
[ 14.594575] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[ 14.594873] [drm] ib test succeeded in 0 usecs
[ 14.595144] [drm] Radeon Display Connectors
[ 14.595146] [drm] Connector 0:
[ 14.595148] [drm] VGA-1
[ 14.595150] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 14.595151] [drm] Encoders:
[ 14.595152] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.595154] [drm] Connector 1:
[ 14.595155] [drm] SVIDEO-1
[ 14.595156] [drm] Encoders:
[ 14.595157] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 14.595159] [drm] Connector 2:
[ 14.595160] [drm] DVI-I-1
[ 14.595161] [drm] HPD1
[ 14.595163] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 14.595164] [drm] Encoders:
[ 14.595165] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.595167] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 14.595173] [drm] Possible lm63 thermal controller at 0x4c
[ 14.600599] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 14.601763] coretemp coretemp.0: Using relative temperature scale!
[ 14.601784] coretemp coretemp.0: Using relative temperature scale!
[ 14.683108] [drm] fb mappable at 0xD00C0000
[ 14.683112] [drm] vram apper at 0xD0000000
[ 14.683113] [drm] size 8294400
[ 14.683115] [drm] fb depth is 24
[ 14.683116] [drm] pitch is 7680
[ 14.683302] fbcon: radeondrmfb (fb0) is primary device
[ 14.684118] Console: switching to colour frame buffer device 240x67
[ 14.684170] fb0: radeondrmfb frame buffer device
[ 14.684172] drm: registered panic notifier
[ 14.684179] [drm] Initialized radeon 2.17.0 20080528 for 0000:01:00.0 on minor 0
[ 14.888203] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.888280] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.888339] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.888452] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.888533] input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.888614] input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.888700] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.920432] cfg80211: World regulatory domain updated:
[ 14.920437] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.920439] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.920441] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.920443] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.920444] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.920446] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.076047] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[ 15.208597] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208602] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208603] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208605] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208607] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208609] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208610] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208612] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208613] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208615] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208617] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208619] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208620] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208622] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208623] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208627] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208630] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208633] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.208637] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208638] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.208640] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208642] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.208643] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 15.208645] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.261466] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.261670] zd1211rw 2-1:1.0: phy0
[ 15.261699] usbcore: registered new interface driver zd1211rw
[ 15.274676] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 21.450125] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 21.526946] init: failsafe main process (772) killed by TERM signal
[ 21.614725] Bluetooth: Core ver 2.16
[ 21.614749] NET: Registered protocol family 31
[ 21.614750] Bluetooth: HCI device and connection manager initialized
[ 21.614993] Bluetooth: HCI socket layer initialized
[ 21.614996] Bluetooth: L2CAP socket layer initialized
[ 21.615001] Bluetooth: SCO socket layer initialized
[ 21.620979] ppdev: user-space parallel port driver
[ 21.635097] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.635101] Bluetooth: BNEP filters: protocol multicast
[ 21.639035] Bluetooth: RFCOMM TTY layer initialized
[ 21.639042] Bluetooth: RFCOMM socket layer initialized
[ 21.639043] Bluetooth: RFCOMM ver 1.11
[ 21.658349] type=1400 audit(1343160473.767:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=893 comm="apparmor_parser"
[ 21.658795] type=1400 audit(1343160473.767:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=893 comm="apparmor_parser"
[ 21.661055] type=1400 audit(1343160473.771:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=901 comm="apparmor_parser"
[ 21.661450] type=1400 audit(1343160473.771:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
[ 21.661665] type=1400 audit(1343160473.771:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=901 comm="apparmor_parser"
[ 21.668025] type=1400 audit(1343160473.779:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=900 comm="apparmor_parser"
[ 21.671844] type=1400 audit(1343160473.779:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=917 comm="apparmor_parser"
[ 21.679228] type=1400 audit(1343160473.787:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=918 comm="apparmor_parser"
[ 21.679740] type=1400 audit(1343160473.787:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=915 comm="apparmor_parser"
[ 21.679760] type=1400 audit(1343160473.787:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=918 comm="apparmor_parser"
[ 22.084965] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.188103] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.188356] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.188711] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.323388] usb 2-1: firmware version 0x4330 and device bootcode version 0x4810 differ
[ 22.485196] zd1211rw 2-1:1.0: firmware version 4605
[ 22.525185] zd1211rw 2-1:1.0: zd1211 chip 0ace:1211 v4810 high 00-11-e2 AL2230_RF pa0 -----
[ 22.527560] cfg80211: Calling CRDA for country: DE
[ 22.531715] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531719] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531721] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531723] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531724] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531726] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531727] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531729] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531731] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531732] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531734] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531736] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531737] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531739] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531740] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531742] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531744] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531745] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531747] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531749] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531750] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531752] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531753] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531755] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531757] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 22.531758] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.531760] cfg80211: Disabling freq 2484 MHz
[ 22.531762] cfg80211: Regulatory domain changed to country: DE
[ 22.531763] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.531765] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.531767] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.531768] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.531770] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 22.560699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.561241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.464906] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.464913] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 23.465076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.444630] wlan0: authenticate with 00:0f:b5:57:d5:56
[ 24.465768] wlan0: send auth to 00:0f:b5:57:d5:56 (try 1/3)
[ 24.467444] wlan0: authenticated
[ 24.480044] wlan0: associate with 00:0f:b5:57:d5:56 (try 1/3)
[ 24.482325] wlan0: RX AssocResp from 00:0f:b5:57:d5:56 (capab=0x431 status=0 aid=1)
[ 24.482956] wlan0: associated
[ 24.483169] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.483436] cfg80211: Calling CRDA for country: GB
[ 24.487228] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487232] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487234] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487236] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487237] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487239] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487240] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487242] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487244] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487245] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487247] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487249] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487250] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487252] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487253] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487255] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487257] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487258] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487260] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487262] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487263] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487265] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487266] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487268] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487270] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.487271] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.487273] cfg80211: Disabling freq 2484 MHz
[ 24.487275] cfg80211: Regulatory domain changed to country: GB
[ 24.487276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.487278] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.487280] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.487281] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.487283] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Bin jetzt mal wieder weg
2004 – 2013 ubuntuusers.de • Einige Rechte vorbehalten