Hallo Schwarmintelligenz,
seitdem ich Trusty installiert, habe ich Probleme mit meinem zweiten Monitor. Beim Anmelde-Bildschirm (LightDM) funktionieren beide Displays tadellos. Sobald ich mich anmelde, schaltet sich der externe Monitor ab. Wenn ich diesen über
xrandr --auto
wieder aktiviere, friert das Bild auf beiden Displays ein, flackert und ist verschoben. Der Mauszeiger lässt sich normal bewegen und das System reagiert auf Tastatureingaben.
Unter Saucy funktionierte noch alles. Trusty habe ich nicht via Upgrade, sondern neu installiert, die Home-Partition wieder eingebunden, die alten Quellen- und Paketlisten wiederhergestellt. Eine xorg.conf exisiert nicht.
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) Subsystem: Lenovo Device [17aa:21c5] Kernel driver in use: i915
xrandr --prop Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767 LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm EDID: 00ffffffffffff0030ae904000000000 01140103801d1078ea15859758538a26 25505400000001010101010101010101 0101010101016c1b566c500019303020 360025a410000018da16566c50001930 3020360025a4100000180000000f008c 09328c092816090006af5631000000fe 004231333358573033205631200a0008 BACKLIGHT: 15 range: (0, 15) Backlight: 15 range: (0, 15) scaling mode: Full aspect supported: None, Full, Center, Full aspect 1366x768 60.1*+ 50.0 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected (normal left inverted right x axis y axis) EDID: 00ffffffffffff00047241ad29189054 310f010368261e6b2a6c55a25a4e9b23 164f54bfef00818f8180714f7140614f 6140454f4540302a009851002a403070 1300782d1100001e000000ff0045544c 343130383036340a2020000000fd0037 4b1e530e000a202020202020000000fc 004163657220414c313935310a20002d 1280x1024 60.0 + 75.0 1152x864 75.0 60.0 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 70.1 HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VIRTUAL1 disconnected (normal left inverted right x axis y axis)
[ 180.601] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 180.601] X Protocol Version 11, Revision 0 [ 180.601] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 180.601] Current Operating System: Linux snorreflorre-ThinkPad-Edge 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 [ 180.601] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=1a3607fa-6daa-4a43-af5f-abaab5d1bba0 ro quiet splash [ 180.601] Build Date: 16 April 2014 01:36:29PM [ 180.601] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 180.601] Current version of pixman: 0.30.2 [ 180.601] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 180.601] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 180.602] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 18 20:40:10 2014 [ 180.602] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 180.603] (==) No Layout section. Using the first Screen section. [ 180.603] (==) No screen section available. Using defaults. [ 180.603] (**) |-->Screen "Default Screen Section" (0) [ 180.603] (**) | |-->Monitor "<default monitor>" [ 180.604] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 180.604] (==) Automatically adding devices [ 180.604] (==) Automatically enabling devices [ 180.604] (==) Automatically adding GPU devices [ 180.604] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 180.604] Entry deleted from font path. [ 180.604] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 180.604] Entry deleted from font path. [ 180.604] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 180.604] Entry deleted from font path. [ 180.604] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 180.604] Entry deleted from font path. [ 180.604] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 180.604] Entry deleted from font path. [ 180.604] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 180.604] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 180.604] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 180.604] (II) Loader magic: 0x7fbf50368d60 [ 180.604] (II) Module ABI versions: [ 180.604] X.Org ANSI C Emulation: 0.4 [ 180.604] X.Org Video Driver: 15.0 [ 180.604] X.Org XInput driver : 20.0 [ 180.604] X.Org Server Extension : 8.0 [ 180.605] (II) xfree86: Adding drm device (/dev/dri/card0) [ 180.607] (--) PCI:*(0:0:2:0) 8086:0046:17aa:21c5 rev 2, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 [ 180.607] Initializing built-in extension Generic Event Extension [ 180.607] Initializing built-in extension SHAPE [ 180.607] Initializing built-in extension MIT-SHM [ 180.607] Initializing built-in extension XInputExtension [ 180.607] Initializing built-in extension XTEST [ 180.607] Initializing built-in extension BIG-REQUESTS [ 180.607] Initializing built-in extension SYNC [ 180.607] Initializing built-in extension XKEYBOARD [ 180.607] Initializing built-in extension XC-MISC [ 180.607] Initializing built-in extension SECURITY [ 180.607] Initializing built-in extension XINERAMA [ 180.607] Initializing built-in extension XFIXES [ 180.607] Initializing built-in extension RENDER [ 180.607] Initializing built-in extension RANDR [ 180.607] Initializing built-in extension COMPOSITE [ 180.607] Initializing built-in extension DAMAGE [ 180.607] Initializing built-in extension MIT-SCREEN-SAVER [ 180.607] Initializing built-in extension DOUBLE-BUFFER [ 180.607] Initializing built-in extension RECORD [ 180.607] Initializing built-in extension DPMS [ 180.607] Initializing built-in extension Present [ 180.607] Initializing built-in extension DRI3 [ 180.607] Initializing built-in extension X-Resource [ 180.607] Initializing built-in extension XVideo [ 180.607] Initializing built-in extension XVideo-MotionCompensation [ 180.607] Initializing built-in extension SELinux [ 180.607] Initializing built-in extension XFree86-VidModeExtension [ 180.607] Initializing built-in extension XFree86-DGA [ 180.607] Initializing built-in extension XFree86-DRI [ 180.607] Initializing built-in extension DRI2 [ 180.607] (II) LoadModule: "glx" [ 180.608] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 180.610] (II) Module glx: vendor="X.Org Foundation" [ 180.610] compiled for 1.15.1, module version = 1.0.0 [ 180.610] ABI class: X.Org Server Extension, version 8.0 [ 180.610] (==) AIGLX enabled [ 180.610] Loading extension GLX [ 180.610] (==) Matched intel as autoconfigured driver 0 [ 180.610] (==) Matched intel as autoconfigured driver 1 [ 180.610] (==) Matched modesetting as autoconfigured driver 2 [ 180.610] (==) Matched fbdev as autoconfigured driver 3 [ 180.610] (==) Matched vesa as autoconfigured driver 4 [ 180.610] (==) Assigned the driver to the xf86ConfigLayout [ 180.610] (II) LoadModule: "intel" [ 180.610] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 180.611] (II) Module intel: vendor="X.Org Foundation" [ 180.611] compiled for 1.15.0, module version = 2.99.910 [ 180.611] Module class: X.Org Video Driver [ 180.611] ABI class: X.Org Video Driver, version 15.0 [ 180.611] (II) LoadModule: "modesetting" [ 180.611] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 180.611] (II) Module modesetting: vendor="X.Org Foundation" [ 180.611] compiled for 1.15.0, module version = 0.8.1 [ 180.611] Module class: X.Org Video Driver [ 180.611] ABI class: X.Org Video Driver, version 15.0 [ 180.611] (II) LoadModule: "fbdev" [ 180.612] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 180.612] (II) Module fbdev: vendor="X.Org Foundation" [ 180.612] compiled for 1.15.0, module version = 0.4.4 [ 180.612] Module class: X.Org Video Driver [ 180.612] ABI class: X.Org Video Driver, version 15.0 [ 180.612] (II) LoadModule: "vesa" [ 180.612] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 180.612] (II) Module vesa: vendor="X.Org Foundation" [ 180.612] compiled for 1.15.0, module version = 2.3.3 [ 180.612] Module class: X.Org Video Driver [ 180.612] ABI class: X.Org Video Driver, version 15.0 [ 180.612] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 180.613] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 180.613] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 180.613] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 180.613] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 180.613] (II) FBDEV: driver for framebuffer: fbdev [ 180.613] (II) VESA: driver for VESA chipsets: vesa [ 180.613] (++) using VT number 7 [ 180.613] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen <tjaalton@ubuntu.com>) [ 180.614] (WW) Falling back to old probe method for modesetting [ 180.614] (WW) Falling back to old probe method for fbdev [ 180.614] (II) Loading sub module "fbdevhw" [ 180.614] (II) LoadModule: "fbdevhw" [ 180.614] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 180.614] (II) Module fbdevhw: vendor="X.Org Foundation" [ 180.614] compiled for 1.15.1, module version = 0.0.2 [ 180.614] ABI class: X.Org Video Driver, version 15.0 [ 180.614] (WW) Falling back to old probe method for vesa [ 180.615] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 180.615] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2 [ 180.615] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 180.615] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 180.615] (==) intel(0): RGB weight 888 [ 180.615] (==) intel(0): Default visual is TrueColor [ 180.616] (**) intel(0): Framebuffer tiled [ 180.616] (**) intel(0): Pixmaps tiled [ 180.616] (**) intel(0): "Tear free" disabled [ 180.616] (**) intel(0): Forcing per-crtc-pixmaps? no [ 180.616] (II) intel(0): Output LVDS1 has no monitor section [ 180.616] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 180.616] (II) intel(0): Output VGA1 has no monitor section [ 180.616] (II) intel(0): Output HDMI1 has no monitor section [ 180.616] (II) intel(0): Output DP1 has no monitor section [ 180.616] (II) intel(0): Output VIRTUAL1 has no monitor section [ 180.616] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0 [ 180.616] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 1 [ 180.616] (==) intel(0): DPI set to (96, 96) [ 180.616] (II) Loading sub module "dri2" [ 180.616] (II) LoadModule: "dri2" [ 180.616] (II) Module "dri2" already built-in [ 180.720] (II) UnloadModule: "modesetting" [ 180.721] (II) Unloading modesetting [ 180.721] (II) UnloadModule: "fbdev" [ 180.721] (II) Unloading fbdev [ 180.721] (II) UnloadSubModule: "fbdevhw" [ 180.721] (II) Unloading fbdevhw [ 180.721] (II) UnloadModule: "vesa" [ 180.721] (II) Unloading vesa [ 180.721] (==) Depth 24 pixmap format is 32 bpp [ 180.722] (II) intel(0): SNA initialized with Ironlake (gen5) backend [ 180.722] (==) intel(0): Backing store enabled [ 180.722] (==) intel(0): Silken mouse enabled [ 180.722] (II) intel(0): HW Cursor enabled [ 180.722] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 180.723] (==) intel(0): DPMS enabled [ 180.723] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 180.723] (II) intel(0): [DRI2] Setup complete [ 180.723] (II) intel(0): [DRI2] DRI driver: i965 [ 180.723] (II) intel(0): [DRI2] VDPAU driver: i965 [ 180.723] (II) intel(0): direct rendering: DRI2 Enabled [ 180.723] (==) intel(0): hotplug detection: "enabled" [ 180.723] (--) RandR disabled [ 180.734] (II) SELinux: Disabled on system [ 180.741] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 180.741] (II) AIGLX: enabled GLX_ARB_create_context [ 180.741] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 180.741] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 180.741] (II) AIGLX: enabled GLX_INTEL_swap_event [ 180.741] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 180.741] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 180.741] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 180.741] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 180.741] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 180.741] (II) AIGLX: Loaded and initialized i965 [ 180.741] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 180.755] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 180.773] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 180.792] (II) intel(0): Setting screen physical size to 361 x 270 [ 180.820] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 180.825] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 180.825] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 180.825] (II) LoadModule: "evdev" [ 180.825] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 180.826] (II) Module evdev: vendor="X.Org Foundation" [ 180.826] compiled for 1.15.0, module version = 2.8.2 [ 180.826] Module class: X.Org XInput Driver [ 180.826] ABI class: X.Org XInput driver, version 20.0 [ 180.826] (II) Using input driver 'evdev' for 'Power Button' [ 180.826] (**) Power Button: always reports core events [ 180.826] (**) evdev: Power Button: Device: "/dev/input/event2" [ 180.826] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 180.826] (--) evdev: Power Button: Found keys [ 180.826] (II) evdev: Power Button: Configuring as keyboard [ 180.826] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 180.826] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 180.826] (**) Option "xkb_rules" "evdev" [ 180.826] (**) Option "xkb_model" "pc105" [ 180.826] (**) Option "xkb_layout" "de" [ 180.830] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 180.831] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 180.831] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 180.831] (II) Using input driver 'evdev' for 'Video Bus' [ 180.831] (**) Video Bus: always reports core events [ 180.831] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 180.832] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 180.832] (--) evdev: Video Bus: Found keys [ 180.832] (II) evdev: Video Bus: Configuring as keyboard [ 180.832] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event4" [ 180.832] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 180.832] (**) Option "xkb_rules" "evdev" [ 180.832] (**) Option "xkb_model" "pc105" [ 180.832] (**) Option "xkb_layout" "de" [ 180.833] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 180.833] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 180.833] (II) Using input driver 'evdev' for 'Power Button' [ 180.833] (**) Power Button: always reports core events [ 180.833] (**) evdev: Power Button: Device: "/dev/input/event1" [ 180.833] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 180.833] (--) evdev: Power Button: Found keys [ 180.833] (II) evdev: Power Button: Configuring as keyboard [ 180.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 180.833] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 180.833] (**) Option "xkb_rules" "evdev" [ 180.833] (**) Option "xkb_model" "pc105" [ 180.833] (**) Option "xkb_layout" "de" [ 180.834] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 180.834] (II) No input driver specified, ignoring this device. [ 180.834] (II) This device may have been added with another device file. [ 180.834] (II) config/udev: Adding drm device (/dev/dri/card0) [ 180.834] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 180.834] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event7) [ 180.834] (II) No input driver specified, ignoring this device. [ 180.835] (II) This device may have been added with another device file. [ 180.835] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5) [ 180.835] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 180.835] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 180.835] (**) Logitech USB Receiver: always reports core events [ 180.835] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5" [ 180.835] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e [ 180.835] (--) evdev: Logitech USB Receiver: Found keys [ 180.835] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 180.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input9/event5" [ 180.835] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9) [ 180.835] (**) Option "xkb_rules" "evdev" [ 180.835] (**) Option "xkb_model" "pc105" [ 180.835] (**) Option "xkb_layout" "de" [ 180.836] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6) [ 180.836] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 180.836] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 180.837] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 180.837] (**) Logitech USB Receiver: always reports core events [ 180.837] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6" [ 180.837] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e [ 180.837] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons [ 180.837] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 180.837] (--) evdev: Logitech USB Receiver: Found relative axes [ 180.837] (--) evdev: Logitech USB Receiver: Found x and y relative axes [ 180.837] (--) evdev: Logitech USB Receiver: Found absolute axes [ 180.837] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist. [ 180.837] (--) evdev: Logitech USB Receiver: Found keys [ 180.837] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 180.837] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 180.837] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 180.837] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 180.837] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 180.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input10/event6" [ 180.837] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10) [ 180.837] (**) Option "xkb_rules" "evdev" [ 180.837] (**) Option "xkb_model" "pc105" [ 180.837] (**) Option "xkb_layout" "de" [ 180.837] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 180.837] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. [ 180.837] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 180.838] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 180.838] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 180.838] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 180.838] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) [ 180.838] (II) No input driver specified, ignoring this device. [ 180.838] (II) This device may have been added with another device file. [ 180.839] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10) [ 180.839] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 180.839] (II) Using input driver 'evdev' for 'Integrated Camera' [ 180.839] (**) Integrated Camera: always reports core events [ 180.839] (**) evdev: Integrated Camera: Device: "/dev/input/event10" [ 180.839] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb1fc [ 180.839] (--) evdev: Integrated Camera: Found keys [ 180.839] (II) evdev: Integrated Camera: Configuring as keyboard [ 180.839] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input18/event10" [ 180.839] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 11) [ 180.839] (**) Option "xkb_rules" "evdev" [ 180.839] (**) Option "xkb_model" "pc105" [ 180.839] (**) Option "xkb_layout" "de" [ 180.840] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 180.840] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 180.840] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 180.840] (**) AT Translated Set 2 keyboard: always reports core events [ 180.840] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 180.840] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 180.840] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 180.840] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 180.840] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 180.840] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 180.840] (**) Option "xkb_rules" "evdev" [ 180.840] (**) Option "xkb_model" "pc105" [ 180.840] (**) Option "xkb_layout" "de" [ 180.841] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9) [ 180.841] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 180.841] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 180.841] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 180.841] (II) LoadModule: "synaptics" [ 180.841] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 180.842] (II) Module synaptics: vendor="X.Org Foundation" [ 180.842] compiled for 1.15.0, module version = 1.7.4 [ 180.842] Module class: X.Org XInput Driver [ 180.842] ABI class: X.Org XInput driver, version 20.0 [ 180.842] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 180.842] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 180.842] (**) Option "Device" "/dev/input/event9" [ 180.860] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 57) [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5036 (res 119) [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 180.860] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 180.860] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 180.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event9" [ 180.872] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 180.872] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 180.872] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 180.872] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035 [ 180.872] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 180.872] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 180.872] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 180.872] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 180.872] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 180.873] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 180.873] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 180.873] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event11) [ 180.873] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 180.873] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall" [ 180.873] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 180.873] (**) TPPS/2 IBM TrackPoint: always reports core events [ 180.873] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event11" [ 180.873] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 180.873] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 180.873] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 180.873] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 180.873] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 180.873] (**) Option "Emulate3Buttons" "true" [ 180.873] (**) Option "EmulateWheel" "true" [ 180.874] (**) Option "EmulateWheelButton" "2" [ 180.874] (**) Option "YAxisMapping" "4 5" [ 180.874] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 180.874] (**) Option "XAxisMapping" "6 7" [ 180.874] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 [ 180.874] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 180.874] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input17/event11" [ 180.874] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14) [ 180.874] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 180.874] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 180.874] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 180.874] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 180.874] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 180.874] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2) [ 180.874] (II) No input driver specified, ignoring this device. [ 180.874] (II) This device may have been added with another device file. [ 180.880] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8) [ 180.880] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 180.880] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 180.880] (**) ThinkPad Extra Buttons: always reports core events [ 180.880] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event8" [ 180.880] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 [ 180.880] (--) evdev: ThinkPad Extra Buttons: Found keys [ 180.880] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 180.880] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input12/event8" [ 180.880] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15) [ 180.880] (**) Option "xkb_rules" "evdev" [ 180.880] (**) Option "xkb_model" "pc105" [ 180.880] (**) Option "xkb_layout" "de" [ 181.807] (II) intel(0): EDID vendor "LEN", prod id 16528 [ 181.807] (II) intel(0): Printing DDC gathered Modelines: [ 181.807] (II) intel(0): Modeline "1366x768"x0.0 70.20 1366 1414 1446 1474 768 771 777 793 -hsync -vsync (47.6 kHz eP) [ 181.807] (II) intel(0): Modeline "1366x768"x0.0 58.50 1366 1414 1446 1474 768 771 777 793 -hsync -vsync (39.7 kHz e) [ 181.976] (II) intel(0): resizing framebuffer to 2646x1024 [ 181.993] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 182.024] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 182.041] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (1366, 0), rotation normal, reflection none [ 197.169] (II) intel(0): resizing framebuffer to 1366x768 [ 197.169] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 197.868] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 201.283] (II) XKB: reuse xkmfile /var/lib/xkb/server-A237F4D5ECC0A2998042D3B58D9A7CE5E820BA0E.xkm
Edit: Heute fiel mir auf, dass der Fehler beim Gastnutzer nicht auftritt. Also habe ich den Xserver neu konfiguriert. Voila, läuft!
sudo -i service lightdm stop X -configure service lightdm start