Moment, nochmal genau. Kommt denn wieder eine EIngabemöglichekit? Oder "hängt" das jeweilige Tool, bis du die Karte entnimmst?

Nebenbei, um den Ansatz der udev-regel nochmal zu verfolgen, bitte irgendwann mal

grep -rni mmc /lib/udev/rules.d

Es "hängt" bis ich die Karte wieder entnehme!

dan@eee:~$ grep -rni mmc /lib/udev/rules.d
/lib/udev/rules.d/80-udisks.rules:42:KERNEL=="sd*|hd*|sr*|mmcblk*|mspblk*", ENV{UDISKS_PRESENTATION_NOPOLICY}="0"
/lib/udev/rules.d/60-persistent-storage.rules:55:KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
/lib/udev/rules.d/60-persistent-storage.rules:56:KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"

tongue23 schrieb:

Es "hängt" bis ich die Karte wieder entnehme!

Dann erscheint auch nichts mehr im Log?

öhm wie seh ich das

redknight schrieb:

tail -f /var/log/syslog

in ein Terminal eingeben und dann die Karte einlegen.

So wie vorher auch.

dan@eee:~$ sudo fdisk -l
[sudo] password for dan: 

Platte /dev/sda: 4001 MByte, 4001292288 Byte
255 Köpfe, 63 Sektoren/Spur, 486 Zylinder, zusammen 7815024 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000dcd61

   Gerät  boot.     Anfang        Ende     Blöcke   Id  System
/dev/sda1   *        2048     6785023     3391488   83  Linux
/dev/sda2         6787070     7813119      513025    5  Erweiterte
/dev/sda5         6787072     7813119      513024   82  Linux Swap / Solaris
dan@eee:~$ tail -f /var/log/syslog
Feb  9 19:35:05 eee kernel: [ 1011.622898] Buffer I/O error on device sdb, logical block 495614
Feb  9 19:35:05 eee kernel: [ 1011.637802] sdb: detected capacity change from 2030043136 to 0
Feb  9 19:35:05 eee udevd[597]: '/sbin/blkid -o udev -p /dev/sdb' [1950] terminated by signal 9 (Killed)
Feb  9 19:35:05 eee udevd[597]: timeout 'udisks-part-id /dev/sdb'
Feb  9 19:35:05 eee kernel: [ 1012.442798] sd 2:0:0:0: [sdb] 3964928 512-byte logical blocks: (2.03 GB/1.89 GiB)
Feb  9 19:35:05 eee kernel: [ 1012.448805] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:05 eee kernel: [ 1012.448821] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:05 eee kernel: [ 1012.459814] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:05 eee kernel: [ 1012.459830] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:05 eee kernel: [ 1012.468409]  sdb: sdb1
Feb  9 19:35:34 eee kernel: [ 1041.025796] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:34 eee kernel: [ 1041.025811] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:34 eee kernel: [ 1041.025824] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:34 eee kernel: [ 1041.025839] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:34 eee kernel: [ 1041.025857] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c 7f f0 00 00 08 00
Feb  9 19:35:34 eee kernel: [ 1041.025888] end_request: I/O error, dev sdb, sector 3964912
Feb  9 19:35:34 eee kernel: [ 1041.025903] Buffer I/O error on device sdb, logical block 495614
Feb  9 19:35:34 eee kernel: [ 1041.040932] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:34 eee kernel: [ 1041.040945] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:34 eee kernel: [ 1041.040958] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:34 eee kernel: [ 1041.040973] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:34 eee kernel: [ 1041.040992] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c 7f f0 00 00 08 00
Feb  9 19:35:34 eee kernel: [ 1041.041021] end_request: I/O error, dev sdb, sector 3964912
Feb  9 19:35:34 eee kernel: [ 1041.041037] Buffer I/O error on device sdb, logical block 495614
Feb  9 19:35:34 eee kernel: [ 1041.056293] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:34 eee kernel: [ 1041.056308] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:34 eee kernel: [ 1041.056322] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:34 eee kernel: [ 1041.056336] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:34 eee kernel: [ 1041.056355] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
Feb  9 19:35:34 eee kernel: [ 1041.056384] end_request: I/O error, dev sdb, sector 0
Feb  9 19:35:34 eee kernel: [ 1041.056400] Buffer I/O error on device sdb, logical block 0
Feb  9 19:35:34 eee kernel: [ 1041.061162] sdb: detected capacity change from 2030043136 to 0
Feb  9 19:35:38 eee kernel: [ 1045.314893] sd 2:0:0:0: [sdb] 3964928 512-byte logical blocks: (2.03 GB/1.89 GiB)
Feb  9 19:35:38 eee kernel: [ 1045.320870] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:38 eee kernel: [ 1045.320887] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:38 eee kernel: [ 1045.334861] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:38 eee kernel: [ 1045.334878] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:38 eee kernel: [ 1045.345459]  sdb: sdb1
Feb  9 19:35:41 eee kernel: [ 1047.834800] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:41 eee kernel: [ 1047.834815] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:41 eee kernel: [ 1047.834829] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:41 eee kernel: [ 1047.834844] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:41 eee kernel: [ 1047.834863] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c 7f f0 00 00 08 00
Feb  9 19:35:41 eee kernel: [ 1047.834893] end_request: I/O error, dev sdb, sector 3964912
Feb  9 19:35:41 eee kernel: [ 1047.834908] Buffer I/O error on device sdb, logical block 495614
Feb  9 19:35:41 eee kernel: [ 1047.846785] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:41 eee kernel: [ 1047.846797] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:41 eee kernel: [ 1047.846810] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:41 eee kernel: [ 1047.846825] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:41 eee kernel: [ 1047.846844] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c 7f f0 00 00 08 00
Feb  9 19:35:41 eee kernel: [ 1047.846873] end_request: I/O error, dev sdb, sector 3964912
Feb  9 19:35:41 eee kernel: [ 1047.846889] Buffer I/O error on device sdb, logical block 495614
Feb  9 19:35:41 eee kernel: [ 1047.861848] sd 2:0:0:0: [sdb] Device not ready
Feb  9 19:35:41 eee kernel: [ 1047.861863] sd 2:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb  9 19:35:41 eee kernel: [ 1047.861877] sd 2:0:0:0: [sdb]  Sense Key : Not Ready [current] 
Feb  9 19:35:41 eee kernel: [ 1047.861892] sd 2:0:0:0: [sdb]  Add. Sense: Medium not present
Feb  9 19:35:41 eee kernel: [ 1047.861911] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
Feb  9 19:35:41 eee kernel: [ 1047.861941] end_request: I/O error, dev sdb, sector 0
Feb  9 19:35:41 eee kernel: [ 1047.861957] Buffer I/O error on device sdb, logical block 0
Feb  9 19:35:41 eee kernel: [ 1047.866858] sdb: detected capacity change from 2030043136 to 0
Feb  9 19:35:44 eee kernel: [ 1051.313894] sd 2:0:0:0: [sdb] 3964928 512-byte logical blocks: (2.03 GB/1.89 GiB)
Feb  9 19:35:44 eee kernel: [ 1051.319864] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:44 eee kernel: [ 1051.319881] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:44 eee kernel: [ 1051.330859] sd 2:0:0:0: [sdb] No Caching mode page present
Feb  9 19:35:44 eee kernel: [ 1051.330877] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb  9 19:35:44 eee kernel: [ 1051.338386]  sdb: sdb1

?

i/O-Error sind meist Hardwarefehler. Hast du die Möglichkeit, diese Karte in einem anderen Lesegerä zu testen und eine andere Karte bei dir?

Die karte ist i.O. Habe es schon mit versch getestet.

Ich habe das Problem jetzt beim x-ten mal googlen lösen können

http://wiki.ubuntuusers.de/Asus_Eee_PC

701 4G
Der Kartenleser funktioniert nicht, wenn im BIOS (Systemstart Taste F2) unter "Advanced" > "OS Installation" die Option "START" eingestellt ist. Die Option muss auf "FINISHED" eingestellt sein.

Danke dennoch für die Unterstützung!