Hallo zusammen, vielleicht kann mir einer von euch helfen:
Ich bin von Ubuntu 7.10 auf 8.04 umgestiegen.
Seitdem brüllen mir die die Lüfter in die Ohren.
Bei 7.10 war es folgenermaßen:
Beim Hochfahren → volle Lautstärke
Beim Anmeldeschirm → Es wird GRAVIEREND leiser
Ich habe weder im Bios noch sonstwo etwas verstellt.
Überwachen der Prozessortaktstufen auf Powersave stellen hat nichts gebracht.
Hier die wichtigsten Ausgaben:
pwnconfig: Found the following devices: hwmon0/device is k8temp hwmon1/device is w83627hf Found the following PWM controls: hwmon1/device/pwm1 hwmon1/device/pwm2 Giving the fans some time to reach full speed... Found the following fan sensors: hwmon1/device/fan1_input current speed: 0 ... skipping! hwmon1/device/fan2_input current speed: 0 ... skipping! hwmon1/device/fan3_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information.
sensors:
k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +49.0°C w83627hf-isa-0290 Adapter: ISA adapter VCore 1: +4.08 V (min = +4.08 V, max = +4.08 V) VCore 2: +4.08 V (min = +4.08 V, max = +4.08 V) +3.3V: +4.08 V (min = +4.08 V, max = +4.08 V) +5V: +6.85 V (min = +6.85 V, max = +6.85 V) +12V: +15.50 V (min = +15.50 V, max = +15.50 V) -12V: +6.06 V (min = +6.06 V, max = +6.06 V) -5V: +5.10 V (min = +5.10 V, max = +5.10 V) V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) VBat: +4.08 V (min = +4.08 V, max = +4.08 V) fan1: 0 RPM (min = 0 RPM, div = 128) fan2: 0 RPM (min = 0 RPM, div = 128) fan3: 0 RPM (min = 0 RPM, div = 128) temp1: -1.0°C (high = -1.0°C, hyst = -1.0°C) sensor = diode temp2: +0.0°C (high = +0.0°C, hyst = +0.0°C) sensor = diode temp3: +0.0°C (high = +0.0°C, hyst = +0.0°C) sensor = diode cpu0_vid: +0.000 V beep_enable:enabled
sensors-detect:
# sensors-detect revision 5016 (2007-11-11 22:20:16 +0100) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. Do you want to probe now? (YES/no): y Probing for PCI bus adapters... Use driver `i2c-viapro' for device 0000:00:11.0: VIA Technologies VT8237 South Bridge We will now try to load each adapter module in turn. Module `i2c-viapro' already loaded. If you have undetectable or unsupported adapters, you can have them scanned by manually loading the modules before running this script. We are now going to do the I2C/SMBus adapter probings. Some chips may be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. Next adapter: SMBus Via Pro adapter at 5000 (i2c-0) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Probing for `Silicon Integrated Systems SIS5595'... No Probing for `VIA VT82C686 Integrated Sensors'... No Probing for `VIA VT8231 Integrated Sensors'... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some Super I/O chips may also contain sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2 Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... Yes Found `Winbond W83627HF/F/HG/G Super IO Sensors' Success! (address 0x290, driver `w83627hf') Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... No Trying family `ITE'... No Some CPUs or memory controllers may also contain embedded sensors. Do you want to scan for them? (YES/no): y AMD K8 thermal sensors... Success! (driver `k8temp') AMD K10 thermal sensors... No Intel Core family thermal sensor... Intel AMB FB-DIMM thermal sensor... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0x290 Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9) Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9) I will now generate the commands needed to load the required modules. Just press ENTER to continue: To load everything that is needed, add this to /etc/modules: #\----cut here\----\ # Chip drivers w83627hf k8temp #\----cut here\---- Do you want to add these lines automatically? (yes/NO)y
Und nun steh ich irgendwie auf dem Schlauch. Jemand eine Idee was ich falsch mache ? Ich bin so ziemlich jede WIKI Anleitung durchgegangen.
Egal welche GUI ich benutze, er erkennt die Geschwindigkeit der Ventilatoren nicht.
Schon mal vielen Dank im Voraus.