Habe hier eine Hauppauge HVR 3000. Kann Analog, DVB-T, DVB-S und Radio (theoretisch). Ich brauch eingetlich nur DVB-S. Unter http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-3000 gibts auch reichlich Doku. Mein Problem scheint nun zu sein, dass die odrt angegebenen Treiber laufen nicht, weil die Karte eh vom System erkannt wird. Aber halt nur als DVB-T. Ich brauche aber DVB-S. Zuletzt hab ich versucht den Single Frontend Treiber installiert. Die Option, das Frontend als DVB-S zu setzen wird nicht verstanden....
[ 15.596492] Linux video capture interface: v2.00 [ 15.654103] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 15.654143] cx8800 0000:0b:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 15.654583] cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53,autodetected] [ 15.654585] cx88[0]: TV tuner type 63, Radio tuner type -1 [ 15.669986] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 15.672206] cx2388x alsa driver version 0.0.6 loaded [ 15.833707] tveeprom 0-0050: Hauppauge model 14109, rev B3D3, serial# 2956138 [ 15.833711] tveeprom 0-0050: MAC address is 00-0D-FE-2D-1B-6A [ 15.833713] tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 63) [ 15.833715] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 15.833718] tveeprom 0-0050: audio processor is CX882 (idx 33) [ 15.833719] tveeprom 0-0050: decoder processor is CX882 (idx 25) [ 15.833721] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter [ 15.833723] cx88[0]: hauppauge eeprom: model=14109 [ 15.834119] input: cx88 IR (Hauppauge WinTV-HVR300 as /class/input/input5 [ 15.872181] cx88[0]/0: found at 0000:0b:0b.0, rev: 5, irq: 19, latency: 165, mmio: 0xf5000000 [ 15.872275] cx88[0]/0: registered device video0 [v4l2] [ 15.872331] cx88[0]/0: registered device vbi0 [ 15.872369] cx88[0]/0: registered device radio0 [ 15.872584] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 15.872606] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.905894] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... [ 15.939188] cx88[0]/2: cx2388x 8802 Driver Manager [ 15.939201] cx88-mpeg driver manager 0000:0b:0b.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 15.939208] cx88[0]/2: found at 0000:0b:0b.2, rev: 5, irq: 19, latency: 64, mmio: 0xf7000000 [ 15.941848] cx88_audio 0000:0b:0b.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 15.941871] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 15.942190] RME Digi96 0000:0b:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 16.100390] cx88_dvb: Unknown parameter `frontend'
Meine Frage nun: Wie kann ich Intrepid die richtigen Treiber unterjubeln? Oder lieg ich falsch mit meinen Folgerungen?
Grüße, leaf