ich habe mir das Synchml plugin angesehen und habe es in es sogar halbwegs zum Laufen gebracht jedesmal wenn ich "Refresh" drücke kommt auf meinem Handy "Dateien mit Computer austauschen" wenn ich dann ja drücke auf dem computer kommt bei mir " Erro synchronizing: Unable to connect one of the memebers" und weiter passiert dann nichts mehr. Es muss also noch ein Fehler in Konfiguration liegen das es zwar mit meinem Handy connected aber nicht weiter kommt.
Hier die Config von syncml-obex-client:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52 | <?xml version="1.0"?>
<config>
<!-- (Only for bluetooth) The bluetooth address if the bluetooth mode is selected -->
<bluetooth_address>00:26:5D:F1:D4:FA</bluetooth_address>
<!-- (Only for bluetooth) The bluetooth channel to use. `sdptool browse $MAC` to search for the correct channel -->
<bluetooth_channel>6</bluetooth_channel>
<!-- (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (you will need access to the USB raw device) to find it. -->
<interface>0</interface>
<!-- The string that the plugin will use to identify itself. Some devices need a special string here. -->
<identifier></identifier>
<!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->
<version>1</version>
<!-- if the plugin should use wbxml -->
<wbxml>1</wbxml>
<!-- The username to use. Leave empty to not require a username -->
<username></username>
<!-- the password for the username -->
<password></password>
<!-- sets the connection type to use. 5 means obex over usb, 2 means obex over bluetooth -->
<type>2</type>
<!-- If wbxml is enabled, defines wether the wbxml should use string tables -->
<usestringtable>0</usestringtable>
<!-- Never send ADD command, but send REPLACE (not needed normally) -->
<onlyreplace>0</onlyreplace>
<!-- Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! -->
<onlyLocaltime>0</onlyLocaltime>
<!-- Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 -->
<recvLimit>0</recvLimit>
<maxObjSize>0</maxObjSize>
<!-- The name of the contacts db. Must be the same as the phones sends -->
<contact_db>Contacts</contact_db>
<!-- The name of the calendar db. Must be the same as the phones sends -->
<calendar_db>Calendar</calendar_db>
<!-- The name of the note db. Must be the same as the phones sends -->
<note_db>Notes</note_db>
</config>
|
die Mac adresse von dem Handy bluetoth anschluss habe ich mit dem befel
herausgekriegt
da kommt folgendes:
| Scanning ...
00:26:5D:F1:D4:FA GT-S5230
|
und dann den Channel mit:
| sdptool browse 00:26:5D:F1:D4:FA
|
da kriege ich folgendes raus:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115 | Browsing 00:26:5D:F1:D4:FA ...
Service RecHandle: 0x10000
Service Class ID List:
"PnP Information" (0x1200)
Service Name: HSP PS Audio Gateway
Service RecHandle: 0x10001
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0100
Service Name: HFP PS Audio Gateway
Service RecHandle: 0x10002
Service Class ID List:
"Handsfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 2
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0105
Service Name: Dialup Networking
Service RecHandle: 0x10003
Service Class ID List:
"Dialup Networking" (0x1103)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 3
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100
Service Name: Serial Server
Service RecHandle: 0x10004
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 4
Service Name: Object Exchange
Service RecHandle: 0x10005
Service Class ID List:
"OBEX Object Push" (0x1105)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 5
"OBEX" (0x0008)
Profile Descriptor List:
"OBEX Object Push" (0x1105)
Version: 0x0100
Service Name: File Transfer
Service RecHandle: 0x10006
Service Class ID List:
"OBEX File Transfer" (0x1106)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 6
"OBEX" (0x0008)
Profile Descriptor List:
"OBEX File Transfer" (0x1106)
Version: 0x0100
Service RecHandle: 0x10008
Service Class ID List:
"AV Remote Target" (0x110c)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x100
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0100
Service Name: Advanced audio source
Service RecHandle: 0x10009
Service Class ID List:
"Audio Source" (0x110a)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 25
"AVDTP" (0x0019)
uint16: 0x100
Profile Descriptor List:
"Advanced Audio" (0x110d)
Version: 0x0100
Service Name: Sim Access
Service RecHandle: 0x1000a
Service Class ID List:
"SIM Access" (0x112d)
"Generic Telephony" (0x1204)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 8
Profile Descriptor List:
"SIM Access" (0x112d)
Version: 0x0100
|
wo könnte der Fehler liegen könnt ihr mir helfen