Guten Tag,
auch ich habe Probleme mit einem Terratec Cinergy T XS USB Modul.
Ich habe nach Anleitung gearbeitet, verschärfend für mein Problem kommt aber noch hinzu, dass ich den Kernel 2.6.34-020634 verwende (weil sonst meine WLAN Karte leider gar nicht funktioniert).
Hier mal die Entscheidende Ausgabe von dmesg beim Einstecken des USB-Sticks:
[ 345.190059] usb 2-2: new high speed USB device using ehci_hcd and address 4
[ 345.348382] em28xx: New device TerraTec Electronic GmbH Cinergy T USB XS @ 480 Mbps (0ccd:0043, interface 0, class 0)
[ 345.348991] em28xx #0: chip ID is em2870
[ 345.487011] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 81 00 6a 24 8e 34
[ 345.487029] em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00
[ 345.487044] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[ 345.487059] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 88 10 7d 47
[ 345.487075] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487090] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487105] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 43 00 69 00
[ 345.487120] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 54 00 20 00
[ 345.487135] em28xx #0: i2c eeprom 80: 55 00 53 00 42 00 20 00 58 00 53 00 00 00 34 03
[ 345.487150] em28xx #0: i2c eeprom 90: 54 00 65 00 72 00 72 00 61 00 54 00 65 00 63 00
[ 345.487165] em28xx #0: i2c eeprom a0: 20 00 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00
[ 345.487180] em28xx #0: i2c eeprom b0: 6e 00 69 00 63 00 20 00 47 00 6d 00 62 00 48 00
[ 345.487195] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487210] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487225] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487240] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 345.487257] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x01535fd1
[ 345.487260] em28xx #0: EEPROM info:
[ 345.487263] em28xx #0: No audio on board.
[ 345.487265] em28xx #0: 500mA max power
[ 345.487269] em28xx #0: Table at 0x06, strings=0x246a, 0x348e, 0x0000
[ 345.488376] em28xx #0: Identified as Terratec Cinergy T XS (card=43)
[ 345.488379] em28xx #0:
[ 345.488381]
[ 345.488384] em28xx #0: The support for this board weren't valid yet.
[ 345.488387] em28xx #0: Please send a report of having this working
[ 345.488390] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 345.488391]
[ 345.494110] Chip ID is not zero. It is not a TEA5767
[ 345.494233] tuner 0-0060: chip found @ 0xc0 (em28xx #0)
[ 345.494353] xc2028 0-0060: creating new instance
[ 345.494356] xc2028 0-0060: type set to XCeive xc2028/xc3028 tuner
[ 345.494366] usb 2-2: firmware: requesting xc3028-v27.fw
[ 345.497007] xc2028 0-0060: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 345.550045] xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000.
[ 346.462280] xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700.
[ 346.476652] SCODE (20000000), id 000000000000b700:
[ 346.476660] xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 346.511884] xc2028 0-0060: Incorrect readback of firmware version.
[ 346.630074] xc2028 0-0060: Loading firmware for type=BASE (1), id 0000000000000000.
[ 347.549973] xc2028 0-0060: Loading firmware for type=(0), id 000000000000b700.
[ 347.564348] SCODE (20000000), id 000000000000b700:
[ 347.564356] xc2028 0-0060: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 347.601945] xc2028 0-0060: Incorrect readback of firmware version.
[ 347.770067] em28xx #0: v4l2 driver version 0.1.2
[ 347.774944] em28xx #0: V4L2 video device registered as video1
Lade ich die Module mittels
sudo modprobe em28xx card=16
sudo modprobe em28xx-dvb
schon vorher, kommt es zwar zu einer anderen Ausgabe, das System friert aber nach ein paar Sekunden ein.
Viele Grüße,
Karl