|
Anmeldungsdatum: Beiträge: 74 Wohnort: Köln |
Tag, ich bekomme leider unter Dapper meine Belkin-WLAN-Karte mit ndiswrapper nicht zum Laufen. ndiswrapper -i bcmwl5a.inf ...und schon lief sie! Mit Dapper funktioniert da leider gar nichts, auch mit dem selben Schema wie oben, bekomme noch nichtmal die LED an der Karte zum Leuchten. Weiß hier jemand Rat? mfG |
|
Anmeldungsdatum: Beiträge: 8 Wohnort: Lampertheim |
Hi ich hab genau das gleiche Problem, aber mit einem Netgear Usb Stick. Hab auf Dapper geupdatet und jetzt starten sie nicht mehr. Wird als present angzeigt und leuchtet aber nicht. Kann uns jemand helfen?
|
Anmeldungsdatum: Beiträge: 85 Wohnort: Sauerland |
Guckt mal mit 'dmesg' nach, ob das ndiswrapper Modul ohne Fehler geladen wurden. islsm_usb islsm_device islsm
Ich habe an meine /etc/modprobe.d/blacklist zum Beispiel folgende Zeilen angehängt: blacklist islsm_usb blacklist islsm_device blacklist islsm /edit: Das Problem mit den Modulen wird auch in diesem Thread behandelt: http://forum.ubuntuusers.de/topic/31845/ |
|
Anmeldungsdatum: Beiträge: 8 Wohnort: Lampertheim |
Cool danke es geht wieder. 😀 |
|
Anmeldungsdatum: Beiträge: 85 Wohnort: Sauerland |
Freut mich, dass ich dir helfen konnte! ☺ |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 74 Wohnort: Köln |
Hallo, bin leider noch nicht weitergekommen... Versteh nicht warum das bei Breezy so einfach war, mein Wlan zu installieren und hier komm ich nicht weiter 🙄
Woher weiß ich denn, welche Module stören? Nehme mal an, das sind folgende: bcm43xx 124044 0 ieee80211softmac 29696 1 bcm43xx ieee80211 37064 2 bcm43xx,ieee80211softmac usbcore 129668 7 ndiswrapper,usblp,usbhid,uhci_hcd,ehci_hcd,ohci_hcd
Nur wenn ich die in die Blacklist aufnehme, bleibt der Rechner beim Hochfahren stehen, und zwar hiermit: [4294719.649000] Process modprobe (pid: 3918, threadinfo=dfa4c000 task=dfa13a90) [4294719.649000] Stack: 00000001 dfa13a90 c0118940 f8e890f4 00000000 f8e89088 f8e781e0 dfa4c000 [4294719.649000] c0244015 f8e890e0 c033f400 f8e89088 f8e8909c c0348714 f8e8909c c0348728 [4294719.649000] f8e89088 c02449cb f8e89088 f8e89060 c01e71fe f8e89088 f7c22960 f8e6343c [4294719.649000] Call Trace: [4294719.649000] [<c0118940>] default_wake_function+0x0/0x20 [4294719.649000] [<c0244015>] bus_remove_driver+0x35/0x70 [4294719.649000] [<c02449cb>] driver_unregister+0xb/0x20 [4294719.649000] [<c01e71fe>] pci_unregister_driver+0xe/0x20 [4294719.649000] [<f8e6343c>] loader_exit+0x4c/0x110 [ndiswrapper] [4294719.649000] [<f8e733c6>] module_cleanup+0x6/0xa0 [ndiswrapper] [4294719.649000] [<f8b54057>] wrapper_init+0x57/0x181 [ndiswrapper] [4294719.649000] [<c01381cf>] sys_init_module+0x9f/0x1d0 [4294719.649000] [<c010302b>] sysenter_past_esp+0x54/0x79 [4294719.649000] Code: 45 f4 00 00 00 00 8b 03 89 45 e8 c7 45 ec 40 89 11 c0 c7 45 e4 01 00 00 00 8d 46 04 8b 48 04 8d 55 f0 89 50 04 89 45 f0 89 4d f4 <89> 11 8d b4 26 00 00 00 00 8b 03 c7 00 02 00 00 00 fb ff 4b 14 [4294719.649000] <6>note: modprobe[3918] exited with preempt_count 1 Wenn ich dann sudo modprobe ndiswrapper eingebe, erhalte ich Segmentation fault Hier nochmal die ganze Ausgabe von lsmod: Module Size Used by rfcomm 40216 0 l2cap 26244 5 rfcomm bluetooth 49892 4 rfcomm,l2cap ppdev 9220 0 cpufreq_userspace 4696 0 cpufreq_stats 5636 0 freq_table 4740 1 cpufreq_stats cpufreq_powersave 1920 0 cpufreq_ondemand 6428 0 cpufreq_conservative 7332 0 video 16260 0 tc1100_wmi 6916 0 sony_acpi 5644 0 pcc_acpi 12416 0 hotkey 11556 0 dev_acpi 11140 0 container 4608 0 button 6672 0 acpi_sbs 19980 0 battery 9988 1 acpi_sbs i2c_acpi_ec 5120 1 acpi_sbs ac 5252 1 acpi_sbs af_packet 22920 0 nls_utf8 2176 1 ntfs 103536 1 nls_iso8859_1 4224 1 nls_cp437 5888 1 vfat 13440 1 fat 53020 1 vfat dm_mod 58936 1 md_mod 72532 0 lp 11844 0 tsdev 8000 0 usblp 13056 0 usbhid 38368 0 parport_pc 35780 1 parport 36296 3 ppdev,lp,parport_pc pcspkr 2180 0 bcm43xx 124044 0 ieee80211softmac 29696 1 bcm43xx ieee80211 37064 2 bcm43xx,ieee80211softmac ieee80211_crypt 6272 1 ieee80211 hisax_isac 8596 0 hisax 533968 1 hisax_isac isdn 142176 1 hisax slhc 7424 1 isdn mISDN_isac 15616 0 psmouse 36228 0 serio_raw 7300 0 mISDN_core 72288 1 mISDN_isac snd_ens1371 24672 3 gameport 15496 1 snd_ens1371 snd_rawmidi 25504 1 snd_ens1371 snd_seq_device 8716 1 snd_rawmidi snd_ac97_codec 92704 1 snd_ens1371 snd_pcm_oss 53664 0 snd_mixer_oss 18688 1 snd_pcm_oss snd_pcm 89864 4 snd_ens1371,snd_ac97_codec,snd_pcm_oss i2c_viapro 8980 0 bt878 10552 0 fcpci 596928 0 kernelcapi 48288 1 fcpci tuner 42276 0 tda9887 15888 0 via_ircc 26900 0 msp3400 32304 0 irda 186940 1 via_ircc snd_timer 25220 2 snd_pcm bttv 164304 1 bt878 video_buf 22148 1 bttv i2c_algo_bit 9608 1 bttv rtc 13492 0 nvidia 4550772 0 v4l2_common 6016 1 bttv btcx_risc 5128 1 bttv tveeprom 15248 1 bttv i2c_core 21904 9 i2c_acpi_ec,i2c_viapro,tuner,tda9887,msp3400,bttv,i2c_algo_bit,nvidia,tveeprom videodev 9856 1 bttv crc_ccitt 2304 2 hisax,irda snd 55268 12 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10208 1 snd snd_page_alloc 10632 1 snd_pcm snd_ac97_bus 2304 1 snd_ac97_codec via_agp 9856 1 agpgart 34888 2 nvidia,via_agp shpchp 45632 0 pci_hotplug 29236 1 shpchp evdev 9856 1 ext3 135688 4 jbd 58772 1 ext3 ide_generic 1536 0 uhci_hcd 33680 0 ehci_hcd 32008 0 ohci_hcd 21892 0 usbcore 129668 6 usblp,usbhid,uhci_hcd,ehci_hcd,ohci_hcd ide_disk 17664 9 ide_cd 33028 0 cdrom 38560 1 ide_cd via82cxxx 9988 0 [permanent] generic 5124 0 thermal 13576 0 processor 23360 1 thermal fan 4868 0 capability 5000 0 commoncap 7296 1 capability vga16fb 13704 1 vgastate 10368 1 vga16fb fbcon 42784 72 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit und dmesg, falls das was hilft: [4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fffc000 (usable) [4294667.296000] BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data) [4294667.296000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] On node 0 totalpages: 262140 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32764 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 ASUS ) @ 0x000f5f50 [4294667.296000] ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000 [4294667.296000] ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2 [4294667.296000] ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030 [4294667.296000] ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058 [4294667.296000] ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0xe408 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:10 APIC version 16 [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hdc4 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 1833.218 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294670.523000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294670.524000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294670.559000] Memory: 1028744k/1048560k available (1976k kernel code, 19152k reserved, 606k data, 288k init, 131056k highmem) [4294670.559000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294670.619000] Calibrating delay using timer specific routine.. 3668.59 BogoMIPS (lpj=1834299) [4294670.619000] Security Framework v1.0.0 initialized [4294670.619000] SELinux: Disabled at boot. [4294670.619000] Mount-cache hash table entries: 512 [4294670.619000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [4294670.619000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [4294670.619000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294670.619000] CPU: L2 Cache: 512K (64 bytes/line) [4294670.619000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 [4294670.619000] mtrr: v2.0 (20020519) [4294670.619000] CPU: AMD Athlon(TM) XP 2500+ stepping 00 [4294670.619000] Enabling fast FPU save and restore... done. [4294670.619000] Enabling unmasked SIMD FPU exception support... done. [4294670.619000] Checking 'hlt' instruction... OK. [4294670.623000] checking if image is initramfs... it is [4294671.218000] Freeing initrd memory: 6834k freed [4294671.231000] ACPI: Looking for DSDT ... not found! [4294671.235000] ENABLING IO-APIC IRQs [4294671.236000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294671.347000] NET: Registered protocol family 16 [4294671.347000] EISA bus registered [4294671.347000] ACPI: bus type pci registered [4294671.347000] PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1 [4294671.348000] PCI: Using configuration type 1 [4294671.348000] ACPI: Subsystem revision 20051216 [4294671.353000] ACPI: Interpreter enabled [4294671.353000] ACPI: Using IOAPIC for interrupt routing [4294671.353000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) [4294671.353000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [4294671.354000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [4294671.354000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [4294671.354000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11 12) [4294671.354000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. [4294671.355000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. [4294671.355000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294671.355000] PCI: Probing PCI hardware (bus 00) [4294671.355000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294671.358000] PCI quirk: region e400-e47f claimed by vt8235 PM [4294671.358000] PCI quirk: region e800-e80f claimed by vt8235 SMB [4294671.358000] Boot video device is 0000:01:00.0 [4294671.358000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294671.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [4294671.364000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294671.364000] pnp: PnP ACPI init [4294671.367000] pnp: PnP ACPI: found 11 devices [4294671.367000] PnPBIOS: Disabled by ACPI PNP [4294671.367000] PCI: Using ACPI for IRQ routing [4294671.367000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294671.375000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved [4294671.375000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved [4294671.375000] pnp: 00:0a: ioport range 0x290-0x297 has been reserved [4294671.375000] pnp: 00:0a: ioport range 0x370-0x375 has been reserved [4294671.375000] PCI: Bridge: 0000:00:01.0 [4294671.375000] IO window: disabled. [4294671.375000] MEM window: e5000000-e67fffff [4294671.375000] PREFETCH window: e7f00000-efffffff [4294671.375000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294671.375000] Simple Boot Flag at 0x3a set to 0x1 [4294671.375000] audit: initializing netlink socket (disabled) [4294671.375000] audit(1150648490.374:1): initialized [4294671.375000] highmem bounce pool size: 64 pages [4294671.375000] VFS: Disk quotas dquot_6.5.1 [4294671.375000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294671.376000] Initializing Cryptographic API [4294671.376000] io scheduler noop registered [4294671.376000] io scheduler anticipatory registered [4294671.376000] io scheduler deadline registered [4294671.376000] io scheduler cfq registered [4294671.376000] isapnp: Scanning for PnP cards... [4294671.732000] isapnp: No Plug & Play device found [4294671.744000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [4294671.744000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [4294671.746000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294671.746000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294671.746000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294671.746000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294671.748000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294671.748000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294671.748000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294671.748000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294671.749000] mice: PS/2 mouse device common for all mice [4294671.749000] EISA: Probing bus 0 at eisa.0 [4294671.749000] EISA: Detected 0 cards. [4294671.749000] NET: Registered protocol family 2 [4294671.759000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294671.759000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [4294671.761000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294671.762000] TCP: Hash tables configured (established 262144 bind 65536) [4294671.762000] TCP reno registered [4294671.762000] TCP bic registered [4294671.762000] NET: Registered protocol family 1 [4294671.762000] NET: Registered protocol family 8 [4294671.762000] NET: Registered protocol family 20 [4294671.762000] Using IPI Shortcut mode [4294671.762000] ACPI wakeup devices: [4294671.762000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN [4294671.762000] ACPI: (supports S0 S1 S4 S5) [4294671.762000] Freeing unused kernel memory: 288k freed [4294671.811000] vga16fb: initializing [4294671.811000] vga16fb: mapped to 0xc00a0000 [4294671.940000] Console: switching to colour frame buffer device 80x25 [4294671.940000] fb0: VGA16 VGA frame buffer device [4294671.968000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294673.036000] Capability LSM initialized [4294673.473000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [4294673.473000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI [4294673.473000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15 [4294673.473000] VP_IDE: chipset revision 6 [4294673.473000] VP_IDE: not 100% native mode: will probe irqs later [4294673.473000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [4294673.473000] ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:DMA [4294673.473000] ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:DMA [4294673.473000] Probing IDE interface ide0... [4294674.523000] hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive [4294674.574000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294674.575000] Probing IDE interface ide1... [4294674.961000] hdc: ST3300831A, ATA DISK drive [4294675.216000] hdd: SAMSUNG SP0802N, ATA DISK drive [4294675.267000] ide1 at 0x170-0x177,0x376 on irq 15 [4294675.289000] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294675.289000] Uniform CD-ROM driver Revision: 3.20 [4294675.402000] hdc: max request size: 1024KiB [4294675.402000] hdc: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) [4294675.402000] hdc: cache flushes supported [4294675.402000] hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 > hdc4 [4294675.458000] hdd: max request size: 1024KiB [4294675.458000] hdd: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [4294675.458000] hdd: cache flushes supported [4294675.458000] hdd: hdd1 [4294675.981000] usbcore: registered new driver usbfs [4294675.981000] usbcore: registered new driver hub [4294675.982000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [4294675.983000] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016) [4294675.983000] ACPI: PCI Interrupt 0000:00:0c.0[B] -> GSI 16 (level, low) -> IRQ 169 [4294675.983000] ohci_hcd 0000:00:0c.0: OHCI Host Controller [4294675.984000] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1 [4294675.984000] ohci_hcd 0000:00:0c.0: irq 169, io mem 0xe4800000 [4294676.037000] hub 1-0:1.0: USB hub found [4294676.037000] hub 1-0:1.0: 2 ports detected [4294676.050000] USB Universal Host Controller Interface driver v2.3 [4294676.138000] PCI: Enabling device 0000:00:0c.1 (0014 -> 0016) [4294676.138000] ACPI: PCI Interrupt 0000:00:0c.1[C] -> GSI 17 (level, low) -> IRQ 177 [4294676.138000] ohci_hcd 0000:00:0c.1: OHCI Host Controller [4294676.138000] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2 [4294676.138000] ohci_hcd 0000:00:0c.1: irq 177, io mem 0xe4000000 [4294676.191000] hub 2-0:1.0: USB hub found [4294676.191000] hub 2-0:1.0: 2 ports detected [4294676.292000] PCI: Enabling device 0000:00:0c.2 (0014 -> 0016) [4294676.292000] ACPI: PCI Interrupt 0000:00:0c.2[D] -> GSI 18 (level, low) -> IRQ 185 [4294676.292000] ohci_hcd 0000:00:0c.2: OHCI Host Controller [4294676.292000] ohci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3 [4294676.292000] ohci_hcd 0000:00:0c.2: irq 185, io mem 0xe3800000 [4294676.345000] hub 3-0:1.0: USB hub found [4294676.345000] hub 3-0:1.0: 2 ports detected [4294676.448000] PCI: Enabling device 0000:00:0c.3 (0014 -> 0016) [4294676.448000] ACPI: PCI Interrupt 0000:00:0c.3[A] -> GSI 19 (level, low) -> IRQ 193 [4294676.448000] ehci_hcd 0000:00:0c.3: EHCI Host Controller [4294676.448000] ehci_hcd 0000:00:0c.3: debug port 1 [4294676.469000] ehci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4 [4294676.469000] ehci_hcd 0000:00:0c.3: irq 193, io mem 0xe3000000 [4294676.469000] ehci_hcd 0000:00:0c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294676.469000] hub 4-0:1.0: USB hub found [4294676.469000] hub 4-0:1.0: 6 ports detected [4294676.570000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 201 [4294676.570000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9 [4294676.570000] ehci_hcd 0000:00:10.3: EHCI Host Controller [4294676.570000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [4294676.570000] ehci_hcd 0000:00:10.3: irq 201, io mem 0xe1800000 [4294676.570000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294676.570000] hub 5-0:1.0: USB hub found [4294676.570000] hub 5-0:1.0: 6 ports detected [4294676.570000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201 [4294676.570000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9 [4294676.570000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294676.672000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [4294676.672000] uhci_hcd 0000:00:10.0: irq 201, io base 0x0000d000 [4294676.672000] hub 6-0:1.0: USB hub found [4294676.672000] hub 6-0:1.0: 2 ports detected [4294676.773000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 201 [4294676.773000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9 [4294676.773000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294676.773000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7 [4294676.773000] uhci_hcd 0000:00:10.1: irq 201, io base 0x0000b800 [4294676.773000] hub 7-0:1.0: USB hub found [4294676.773000] hub 7-0:1.0: 2 ports detected [4294676.874000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 201 [4294676.874000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9 [4294676.874000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294676.874000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 8 [4294676.874000] uhci_hcd 0000:00:10.2: irq 201, io base 0x0000b400 [4294676.874000] hub 8-0:1.0: USB hub found [4294676.874000] hub 8-0:1.0: 2 ports detected [4294677.098000] Attempting manual resume [4294677.132000] EXT3-fs: mounted filesystem with ordered data mode. [4294677.132000] kjournald starting. Commit interval 5 seconds [4294677.187000] usb 6-1: new low speed USB device using uhci_hcd and address 2 [4294677.682000] usb 7-1: new full speed USB device using uhci_hcd and address 2 [4294685.206000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294685.209000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294685.230000] Linux agpgart interface v0.101 (c) Dave Jones [4294685.232000] agpgart: Detected VIA KT400/KT400A/KT600 chipset [4294685.240000] agpgart: AGP aperture is 128M @ 0xf0000000 [4294685.792000] Linux video capture interface: v1.00 [4294685.841000] nvidia: module license 'NVIDIA' taints kernel. [4294685.846000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294685.847000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006 [4294685.856000] Real Time Clock Driver v1.12 [4294685.873000] bttv: driver version 0.9.16 loaded [4294685.873000] bttv: using 8 buffers with 2080k (520 pages) each for capture [4294685.873000] bttv: Bt8xx card found (0). [4294685.873000] PCI: Enabling device 0000:00:0b.0 (0004 -> 0006) [4294685.873000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193 [4294685.873000] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 193, latency: 32, mmio: 0xe7000000 [4294685.873000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 [4294685.873000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] [4294685.873000] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] [4294685.874000] bttv0: i2c: checking for MSP34xx @ 0x80... found [4294685.875000] bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes [4294685.875000] bttv0: using tuner=33 [4294685.875000] bttv0: i2c: checking for MSP34xx @ 0x80... found [4294685.910000] irda_init() [4294685.910000] NET: Registered protocol family 23 [4294685.950000] msp3400 0-0040: chip=MSP3410G-B11 +nicam +simple +simpler +radio mode=simpler [4294685.950000] msp3400 0-0040: msp34xxg daemon started [4294685.997000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [4294685.999000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [4294686.016000] tda9887 0-004b: chip found @ 0x96 (bt878 #0 [sw]) [4294686.037000] tuner 0-0060: Chip ID is not zero. It is not a TEA5767 [4294686.037000] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [4294686.046000] tuner 0-0060: microtune: companycode=3dbf part=42 rev=9d [4294686.051000] tuner 0-0060: microtune MT2050 found, OK [4294686.083000] bttv0: registered device video0 [4294686.083000] bttv0: registered device vbi0 [4294686.083000] bttv0: registered device radio0 [4294686.129000] bttv0: PLL: 28636363 => 35468950 .<5>CAPI Subsystem Rev 1.1.2.8 [4294686.137000] fcpci: AVM FRITZ!Card PCI driver, revision 0.7.2 [4294686.137000] fcpci: (fcpci built on May 29 2006 at 12:49:12) [4294686.137000] fcpci: -- 32 bit CAPI driver -- [4294686.140000] . ok [4294686.206000] PCI: Enabling device 0000:00:0e.0 (0100 -> 0103) [4294686.206000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 177 [4294686.206000] fcpci: AVM FRITZ!Card PCI found: port 0xd800, irq 177 [4294686.206000] fcpci: Loading... [4294686.206000] fcpci: Driver 'fcpci' attached to fcpci-stack. (152) [4294686.240000] bt878: AUDIO driver version 0.0.0 loaded [4294686.240000] bt878: Bt878 AUDIO function found (0). [4294686.240000] PCI: Enabling device 0000:00:0b.1 (0004 -> 0006) [4294686.240000] ACPI: PCI Interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 193 [4294686.240000] bt878(0): Bt878 (rev 17) at 00:0b.1, irq: 193, latency: 32, memory: 0xe6800000 [4294686.458000] fcpci: Stack version 3.11-07 [4294686.458000] kcapi: Controller 1: fcpci-d800-177 attached [4294686.458000] kcapi: card 1 "fcpci-d800-177" ready. [4294686.458000] fcpci: Loaded. [4294686.498000] PCI: Enabling device 0000:00:0f.0 (0004 -> 0005) [4294686.498000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 185 [4294686.514000] Modular ISDN Stack core $Revision: 1.25 $ [4294686.812000] mISDNd: kernel daemon started [4294686.813000] ISAC module $Revision: 1.16 $ [4294686.816000] AVM Fritz PCI/PnP driver Rev. 1.30 [4294686.816000] kobject_register failed for fcpci (-17) [4294686.816000] [<c01d9ce3>] kobject_register+0x43/0x60 [4294686.816000] [<c0243f7c>] bus_add_driver+0x5c/0xc0 [4294686.816000] [<c01e71ba>] __pci_register_driver+0x6a/0xa0 [4294686.816000] [<f88f809f>] Fritz_init+0x9f/0xcd [avmfritz] [4294686.816000] [<c01381cf>] sys_init_module+0x9f/0x1d0 [4294686.816000] [<c010302b>] sysenter_past_esp+0x54/0x79 [4294686.834000] CSLIP: code copyright 1989 Regents of the University of California [4294686.840000] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [4294686.864000] HiSax: Linux Driver for passive ISDN cards [4294686.864000] HiSax: Version 3.5 (module) [4294686.864000] HiSax: Layer1 Revision 2.46.2.5 [4294686.864000] HiSax: Layer2 Revision 2.30.2.4 [4294686.864000] HiSax: TeiMgr Revision 2.20.2.3 [4294686.864000] HiSax: Layer3 Revision 2.22.2.3 [4294686.864000] HiSax: LinkLayer Revision 2.59.2.4 [4294686.865000] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 [4294686.866000] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 [4294686.866000] kobject_register failed for fcpci (-17) [4294686.866000] [<c01d9ce3>] kobject_register+0x43/0x60 [4294686.866000] [<c0243f7c>] bus_add_driver+0x5c/0xc0 [4294686.866000] [<c01e71ba>] __pci_register_driver+0x6a/0xa0 [4294686.866000] [<f88f801a>] hisax_fcpcipnp_init+0x1a/0x56 [hisax_fcpcipnp] [4294686.866000] [<c01381cf>] sys_init_module+0x9f/0x1d0 [4294686.866000] [<c010302b>] sysenter_past_esp+0x54/0x79 [4294686.887000] ieee80211_crypt: registered algorithm 'NULL' [4294686.889000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294686.889000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [4294686.905000] bcm43xx driver [4294686.905000] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006) [4294686.905000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294686.988000] input: PC Speaker as /class/input/input1 [4294687.031000] parport: PnPBIOS parport detected. [4294687.031000] parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE,EPP] [4294687.496000] usbcore: registered new driver hiddev [4294687.638000] input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input2 [4294687.638000] input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:10.0-1 [4294687.638000] usbcore: registered new driver usbhid [4294687.638000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294688.522000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1084 [4294688.522000] usbcore: registered new driver usblp [4294688.522000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [4294688.532000] ts: Compaq touchscreen protocol output [4294688.918000] lp0: using parport0 (interrupt-driven). [4294688.973000] Adding 996020k swap on /dev/hdc2. Priority:-1 extents:1 across:996020k [4294689.092000] EXT3 FS on hdc4, internal journal [4294689.229000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294689.229000] md: bitmap version 4.39 [4294689.720000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294745.812000] kjournald starting. Commit interval 5 seconds [4294745.812000] EXT3 FS on hdc1, internal journal [4294745.812000] EXT3-fs: mounted filesystem with ordered data mode. [4294745.814000] kjournald starting. Commit interval 5 seconds [4294745.814000] EXT3 FS on hdc6, internal journal [4294745.814000] EXT3-fs: mounted filesystem with ordered data mode. [4294745.976000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [4294746.013000] NTFS volume version 3.1. [4294746.037000] kjournald starting. Commit interval 5 seconds [4294746.037000] EXT3 FS on hdc5, internal journal [4294746.038000] EXT3-fs: mounted filesystem with ordered data mode. [4294747.866000] NET: Registered protocol family 17 [4294751.635000] ACPI: Power Button (FF) [PWRF] [4294751.635000] ACPI: Power Button (CM) [PWRB] [4294751.738000] ibm_acpi: ec object not found [4294751.760000] pcc_acpi: loading... [4294753.156000] ppdev: user-space parallel port driver [4294753.401000] apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac) [4294753.401000] apm: overridden by ACPI. [4294755.630000] Bluetooth: Core ver 2.8 [4294755.630000] NET: Registered protocol family 31 [4294755.630000] Bluetooth: HCI device and connection manager initialized [4294755.630000] Bluetooth: HCI socket layer initialized [4294755.667000] Bluetooth: L2CAP ver 2.8 [4294755.667000] Bluetooth: L2CAP socket layer initialized [4294755.680000] Bluetooth: RFCOMM socket layer initialized [4294755.680000] Bluetooth: RFCOMM TTY layer initialized [4294755.680000] Bluetooth: RFCOMM ver 1.7 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 74 Wohnort: Köln |
noch jemand eine Idee zu meinem Problem? |
|
Anmeldungsdatum: Beiträge: Zähle... |
Ist für dich vielleicht zu spät, aber vielleicht hilfts anderen: Hatte gerade das gleiche problem wie du, ich wußte zudem auch nicht welche Module ich den nun auf die Blacklist setzen sollte. blacklist ieee80211softmac geklappt. Ich denke mal das du den usbcore zuviel auf der Blacklist hattest 😉 |
|
Anmeldungsdatum: Beiträge: 5 |
erstmal ein hallo, denn ich bin neu hier, und auch bei ubuntu 😉 ich habe auch das problem die wlan karte zum laufen zu kriegen und mir is inner log was aufgefallen... kernel: [17180142.328000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes) kernel: [17180142.392000] ndiswrapper: driver mrv8335a (Marvell,02/22/2005,3.1.1.7) loaded kernel: [17180142.392000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 kernel: [17180142.396000] ndiswrapper: using irq 10 kernel: [17180142.496000] ndiswrapper (miniport_init:240): couldn't initialize device: C0000001 kernel: [17180142.496000] ndiswrapper (pnp_start_device:479): Windows driver couldn't initialize the device (C0000001) was sagt ihr dazu? |