ubuntuusers.de

Dvb-t Stick wird nicht erkannt

Status: Ungelöst | Ubuntu-Version: Ubuntu 11.10 (Oneiric Ocelot)
Antworten |

niels.b

Anmeldungsdatum:
29. September 2011

Beiträge: Zähle...

Hallo,

ich versuche jetzt schon länger meinen DVB-T Stick ans laufen zu bringen. Unter Windows 7 hat der funktioniert nun suche ich eine Lösung für Ubuntu. Bisher hat das durchsuchen von Forum und Wiki nichts gebracht.

Ich habe einen Cinergy Hybrid Stick von Terratec, lsusb gibt folgende Ausgabe :

1
Bus 001 Device 005: ID 0ccd:00a5 TerraTec Electronic GmbH Cinergy Hybrid Stick

Die Hardwaredatenbank scheint das Gerät nicht zu kennen und auch bei Terratec selber habe ich bisher nichts gefunden.

der Befehl dmesg hat bisher auch nichts gezeigt, v4l-dvb ist installiert.

Danke schonmal

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

Hallo niels.b

lt. http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices ist der Treiber für den Stick ab Kernel 2.6.35 (Standardkernel von Ubuntu 10.10) im Kernel enthalten. Möglicher Weise benötigst du noch die dort angegebene Firmware xc3028L-v36.fw.

Was zeigt:

dmesg | grep -i dvb

edit: Die Firmware kannst du zum Beispiel so downloaden und installieren:

wget http://steventoth.net/linux/hvr1400/xc3028L-v36.fw
sudo cp xc3028L-v36.fw /lib/firmware

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

Hallo,

1
dmesg | grep -i dvb

funktioniert nicht, keine Ausagabe.

Papamatti

Anmeldungsdatum:
13. September 2007

Beiträge: 590

Versuche mal:

sudo apt-get install linux-firmware-nonfree

Dort ist die Datei /lib/firmware/xc3028-v27.fw enthalten.

Danach den Rechner neu starten, damit er die Firmware dann beim booten übernimmt.

Schreib bitte ob es geklappt hat!

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

ist schon installiert gewesen, auch nach neustart keine Reaktion

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

In der Detailübersicht hier 🇬🇧 steht, dass ein tm6010-Chip verbaut ist, Damit sollte das Kernelmodul tm6000 zusammenarbeiten. Dies kannst du mal testweise bei angesteckten Stick laden:

sudo modprobe -v tm6000

und die verwendete Version ansehen:

modinfo tm6000

Eigentlich sollte es mit der Version funktionieren, die beim Kernel (Paket linux-image) dabei ist. Die Installation von v4l-dvb sollte nicht notwendig sein.

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

1
sudo modprobe -v tm6000

gibt mir folgende Ausgabe :

1
2
3
4
5
insmod /lib/modules/3.0.0-12-generic-pae/kernel/drivers/media/video/v4l2-common.ko 
insmod /lib/modules/3.0.0-12-generic-pae/kernel/drivers/media/rc/rc-core.ko 
insmod /lib/modules/3.0.0-12-generic-pae/kernel/drivers/media/video/videobuf-core.ko 
insmod /lib/modules/3.0.0-12-generic-pae/kernel/drivers/media/video/videobuf-vmalloc.ko 
insmod /lib/modules/3.0.0-12-generic-pae/kernel/drivers/staging/tm6000/tm6000.ko
1
modinfo tm 6000

diese Ausgabe :

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
filename:       /lib/modules/3.0.0-12-generic-pae/kernel/drivers/staging/tm6000/tm6000.ko
license:        GPL
author:         Mauro Carvalho Chehab
description:    Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter
srcversion:     696597826C377014CA5970D
depends:        videobuf-core,rc-core,v4l2-common,videodev,videobuf-vmalloc
staging:        Y
vermagic:       3.0.0-12-generic-pae SMP mod_unload modversions 686 
parm:           ir_debug:enable debug message [IR] (int)
parm:           enable_ir:enable ir (default is enable) (int)
parm:           tm6010_a_mode:set tm6010 sif audio mode (int)
parm:           video_nr:Allow changing video device number (int)
parm:           debug:activates debug info (int)
parm:           vid_limit:capture memory limit in megabytes (int)
parm:           i2c_debug:enable debug messages [i2c] (int)
parm:           card:array of int

Was hat das zu bedeuten, bzw. kann man sehen ob da irgendwas nicht in Ordnung ist?

1
2
3


dmesg | grep -i dvb

gibt mir auch bei geladenem Modul keine Ausgabe. Kann das vielleicht etwas mit meinem System zu tun haben?

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

niels.b schrieb:

filename:       /lib/modules/3.0.0-12-generic-pae/kernel/drivers/staging/tm6000/tm6000.ko
license:        GPL
author:         Mauro Carvalho Chehab
description:    Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter
srcversion:     696597826C377014CA5970D
depends:        videobuf-core,rc-core,v4l2-common,videodev,videobuf-vmalloc
staging:        Y
vermagic:       3.0.0-12-generic-pae SMP mod_unload modversions 686 
parm:           ir_debug:enable debug message [IR] (int)
parm:           enable_ir:enable ir (default is enable) (int)
parm:           tm6010_a_mode:set tm6010 sif audio mode (int)
parm:           video_nr:Allow changing video device number (int)
parm:           debug:activates debug info (int)
parm:           vid_limit:capture memory limit in megabytes (int)
parm:           i2c_debug:enable debug messages [i2c] (int)
parm:           card:array of int

Was hat das zu bedeuten, bzw. kann man sehen ob da irgendwas nicht in Ordnung ist?

Ich habe unter 11.10 die gleiche Version (gelbmarkiert) wie du. Scheint also keine Sonderversion aus irgendeiner anderen Quelle zu sein. Dieses Kernelmodul ist noch im "Staging"-Bereich. Ist also eher als instabil einzustufen. Aus dem Staging-Bereich wird auch nichts automatisch geladen.

Das manuelle Laden hat aber funktioniert. Mit

dmesg

ohne Filter siehst du nach dem Laden vielleicht eine Fehlermeldung, woran es hakt. Ein paar Ausgaben zum Modul tm6000 sollten auf jeden Fall vorhanden sein:

dmesg | grep -i tm6000

edit: Versuch den Stick vielleicht erst anzustecken, nachdem der Treiber bereits geladen ist. Diese Reihenfolge habe ich in einer funktionierenden Anleitung hier 🇮🇹 gefunden, wo aber aufgrund der Kernelversion 2.6.34 noch jener Teil mit v4l-dvb nötig war.

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

bei geladenem Modul hab ich diese Ausgabe :

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
[  230.822790] tm6000: module is from the staging directory, the quality is unknown, you have been warned.
[  230.823597] tm6000 v4l2 driver version 0.0.2 loaded
[  230.824563] tm6000: alt 0, interface 0, class 255
[  230.824567] tm6000: alt 0, interface 0, class 255
[  230.824570] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[  230.824573] tm6000: alt 0, interface 0, class 255
[  230.824575] tm6000: alt 1, interface 0, class 255
[  230.824578] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[  230.824581] tm6000: alt 1, interface 0, class 255
[  230.824583] tm6000: alt 1, interface 0, class 255
[  230.824586] tm6000: INT IN endpoint: 0x83 (max size=4 bytes)
[  230.824589] tm6000: alt 2, interface 0, class 255
[  230.824591] tm6000: alt 2, interface 0, class 255
[  230.824594] tm6000: alt 2, interface 0, class 255
[  230.824596] tm6000: alt 3, interface 0, class 255
[  230.824599] tm6000: alt 3, interface 0, class 255
[  230.824602] tm6000: alt 3, interface 0, class 255
[  230.824604] tm6000: New video device @ 480 Mbps (0ccd:00a5, ifnum 0)
[  230.824607] tm6000: Found Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
[  232.220015] tm6000 #0: i2c eeprom 00: 42 59 54 45 12 01 00 02 00 00 00 40 cd 0c a5 00  BYTE.......@....
[  232.412018] tm6000 #0: i2c eeprom 10: 01 00 10 20 40 01 02 03 48 79 62 72 69 64 2d 55  ... @...Hybrid-U
[  232.604019] tm6000 #0: i2c eeprom 20: 53 42 ff ff ff ff ff ff ff ff ff ff ff ff ff ff  SB..............
[  232.796018] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  232.988019] tm6000 #0: i2c eeprom 40: 2a 00 43 00 69 00 6e 00 65 00 72 00 67 00 79 00  *.C.i.n.e.r.g.y.
[  233.184018] tm6000 #0: i2c eeprom 50: 20 00 48 00 79 00 62 00 72 00 69 00 64 00 2d 00   .H.y.b.r.i.d.-.
[  233.376029] tm6000 #0: i2c eeprom 60: 53 00 74 00 69 00 63 00 6b 00 01 ff ff ff ff ff  S.t.i.c.k.......
[  233.568019] tm6000 #0: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  233.760018] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  233.952022] tm6000 #0: i2c eeprom 90: ff ff ff ff 1a 03 30 00 30 00 30 00 38 00 43 00  ......0.0.0.8.C.
[  234.144017] tm6000 #0: i2c eeprom a0: 41 00 31 00 32 00 33 00 34 00 35 00 36 00 ff ff  A.1.2.3.4.5.6...
[  234.336027] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  234.528024] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  234.720019] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  234.912019] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  235.104019] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[  292.428135] tm6000 #0: registered device video1
[  292.428139] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[  292.592127] input: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc0/input7
[  292.592203] rc0: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc0
[  292.804048] tm6000: open called (dev=video1)
[  292.804088] usbcore: registered new interface driver tm6000

das spätere Anstecken hat bei mir leider nichts gebracht.

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

[  230.824607] tm6000: Found Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick

Der Treiber findet den Stick. Der erste Schritt ist getan...

Nehme an, dass du die Ausgabe mit

dmesg | grep -i tm6000

gefiltert hast.

Liefert die Ausgabe ohne Filter

dmesg 

zusätzliche Infos?

Interessant wäre die Ausgabe ab hier:

[  292.428135] tm6000 #0: registered device video1 

Wird die Firmware geladen? Treten Probleme dabei auf? ......

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

Das ist was dmesg ungefiltert ausgibt für, ich hab mal nur das rauskopiert wo auch was zum tm 6000 steht:

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
[11884.151922] tm6000: alt 0, interface 0, class 255
[11884.151924] tm6000: alt 0, interface 0, class 255
[11884.151927] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[11884.151929] tm6000: alt 0, interface 0, class 255
[11884.151932] tm6000: alt 1, interface 0, class 255
[11884.151934] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[11884.151937] tm6000: alt 1, interface 0, class 255
[11884.151939] tm6000: alt 1, interface 0, class 255
[11884.151941] tm6000: INT IN endpoint: 0x83 (max size=4 bytes)
[11884.151944] tm6000: alt 2, interface 0, class 255
[11884.151946] tm6000: alt 2, interface 0, class 255
[11884.151948] tm6000: alt 2, interface 0, class 255
[11884.151950] tm6000: alt 3, interface 0, class 255
[11884.151952] tm6000: alt 3, interface 0, class 255
[11884.151954] tm6000: alt 3, interface 0, class 255
[11884.151957] tm6000: New video device @ 480 Mbps (0ccd:00a5, ifnum 0)
[11884.151959] tm6000: Found Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
[11884.164020] Found tm6010
[11885.548018] tm6000 #1: i2c eeprom 00: 42 59 54 45 12 01 00 02 00 00 00 40 cd 0c a5 00  BYTE.......@....
[11885.740017] tm6000 #1: i2c eeprom 10: 01 00 10 20 40 01 02 03 48 79 62 72 69 64 2d 55  ... @...Hybrid-U
[11885.932017] tm6000 #1: i2c eeprom 20: 53 42 ff ff ff ff ff ff ff ff ff ff ff ff ff ff  SB..............
[11886.124017] tm6000 #1: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11886.316017] tm6000 #1: i2c eeprom 40: 2a 00 43 00 69 00 6e 00 65 00 72 00 67 00 79 00  *.C.i.n.e.r.g.y.
[11886.508016] tm6000 #1: i2c eeprom 50: 20 00 48 00 79 00 62 00 72 00 69 00 64 00 2d 00   .H.y.b.r.i.d.-.
[11886.700017] tm6000 #1: i2c eeprom 60: 53 00 74 00 69 00 63 00 6b 00 01 ff ff ff ff ff  S.t.i.c.k.......
[11886.892016] tm6000 #1: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11887.084017] tm6000 #1: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11887.276017] tm6000 #1: i2c eeprom 90: ff ff ff ff 1a 03 30 00 30 00 30 00 38 00 43 00  ......0.0.0.8.C.
[11887.468016] tm6000 #1: i2c eeprom a0: 41 00 31 00 32 00 33 00 34 00 35 00 36 00 ff ff  A.1.2.3.4.5.6...
[11887.660017] tm6000 #1: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11887.852017] tm6000 #1: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11888.044017] tm6000 #1: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11888.236017] tm6000 #1: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11888.428017] tm6000 #1: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
[11888.608059] tuner 3-0061: Tuner -1 found with type(s) Radio TV.
[11888.608071] xc2028 3-0061: creating new instance
[11888.608078] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[11888.608081] Setting firmware parameters for xc2028
[11888.608087] ------------[ cut here ]------------
[11888.608095] WARNING: at /build/buildd/linux-3.0.0/drivers/base/firmware_class.c:524 _request_firmware+0x1f1/0x220()
[11888.608098] Hardware name: EP41-UD3L
[11888.608100] Modules linked in: rc_nec_terratec_cinergy_xs tuner_xc2028 tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder tm6000(C) ir_rc6_decoder ir_rc5_decoder ir_nec_decoder videobuf_vmalloc videobuf_core rc_core v4l2_common snd_hrtimer bnep rfcomm nfsd lockd nfs_acl auth_rpcgss sunrpc vesafb binfmt_misc gspca_spca561 gspca_main snd_hda_codec_realtek ppdev snd_hda_intel snd_hda_codec snd_hwdep videodev nvidia(P) snd_pcm snd_seq_midi snd_rawmidi usbhid hid snd_seq_midi_event psmouse serio_raw btusb snd_seq parport_pc bluetooth snd_timer snd_seq_device snd soundcore snd_page_alloc lp parport usb_storage uas r8169
[11888.608149] Pid: 5662, comm: pm-suspend Tainted: P         C  3.0.0-12-generic-pae #20-Ubuntu
[11888.608151] Call Trace:
[11888.608157]  [<c15414ca>] ? printk+0x2d/0x2f
[11888.608163]  [<c1050312>] warn_slowpath_common+0x72/0xa0
[11888.608167]  [<c1369b01>] ? _request_firmware+0x1f1/0x220
[11888.608171]  [<c1369b01>] ? _request_firmware+0x1f1/0x220
[11888.608175]  [<c1050362>] warn_slowpath_null+0x22/0x30
[11888.608179]  [<c1369b01>] _request_firmware+0x1f1/0x220
[11888.608183]  [<c1369bcf>] request_firmware+0x1f/0x30
[11888.608188]  [<f8f65641>] load_all_firmwares.isra.7+0x61/0x6c0 [tuner_xc2028]
[11888.608194]  [<c100fdf8>] ? sched_clock+0x8/0x10
[11888.608198]  [<c1290051>] ? format_decode+0x311/0x380
[11888.608207]  [<c102da88>] ? default_spin_lock_flags+0x8/0x10
[11888.608210]  [<c15555fd>] ? _raw_spin_lock_irqsave+0x2d/0x40
[11888.608214]  [<c107480a>] ? up+0x2a/0x40
[11888.608217]  [<f8f666f9>] check_firmware+0x599/0x930 [tuner_xc2028]
[11888.608220]  [<c128fbb5>] ? put_dec+0x85/0x90
[11888.608222]  [<c1290e0a>] ? number.isra.3+0x30a/0x320
[11888.608225]  [<c100fdf8>] ? sched_clock+0x8/0x10
[11888.608228]  [<f8f66afe>] generic_set_freq+0x6e/0x540 [tuner_xc2028]
[11888.608231]  [<c102da88>] ? default_spin_lock_flags+0x8/0x10
[11888.608234]  [<c15555fd>] ? _raw_spin_lock_irqsave+0x2d/0x40
[11888.608236]  [<c107480a>] ? up+0x2a/0x40
[11888.608239]  [<f8f6707b>] xc2028_set_analog_freq+0xab/0x220 [tuner_xc2028]
[11888.608243]  [<f8f537ee>] fe_set_params+0x1e/0x60 [tuner]
[11888.608246]  [<f8f5332b>] set_tv_freq+0xab/0x1f0 [tuner]
[11888.608249]  [<f8f5355e>] ? fe_set_config+0x1e/0x60 [tuner]
[11888.608254]  [<f8f31e80>] ? tm6000_tuner_callback.part.3+0x260/0x260 [tm6000]
[11888.608257]  [<f8f54b14>] ? tuner_s_config+0x34/0x80 [tuner]
[11888.608260]  [<f8f53498>] set_freq+0x28/0x50 [tuner]
[11888.608263]  [<f8f55213>] tuner_s_std+0x83/0xd8 [tuner]
[11888.608267]  [<f8f31e80>] ? tm6000_tuner_callback.part.3+0x260/0x260 [tm6000]
[11888.608270]  [<f8f55190>] ? tuner_fixup_std.isra.8+0x280/0x280 [tuner]
[11888.608274]  [<f8f31618>] tm6000_init_dev+0xc8/0x1f0 [tm6000]
[11888.608276]  [<c15414ca>] ? printk+0x2d/0x2f
[11888.608280]  [<f8f318fa>] tm6000_usb_probe+0x1ba/0x450 [tm6000]
[11888.608285]  [<c13e342c>] usb_probe_interface+0xac/0x1a0
[11888.608288]  [<c135f1ad>] really_probe+0x4d/0x150
[11888.608291]  [<c13675b9>] ? pm_runtime_barrier+0x49/0xb0
[11888.608294]  [<c135f3ea>] driver_probe_device+0x3a/0x60
[11888.608296]  [<c135f4f1>] __device_attach+0x41/0x50
[11888.608299]  [<c135f4b0>] ? __driver_attach+0xa0/0xa0
[11888.608301]  [<c135e279>] bus_for_each_drv+0x49/0x70
[11888.608304]  [<c135f37a>] device_attach+0x8a/0xa0
[11888.608306]  [<c135f4b0>] ? __driver_attach+0xa0/0xa0
[11888.608309]  [<c13e312e>] usb_rebind_intf+0x3e/0x60
[11888.608311]  [<c15414ca>] ? printk+0x2d/0x2f
[11888.608314]  [<c13e31c8>] do_unbind_rebind.isra.10+0x58/0x80
[11888.608317]  [<c13e3255>] usb_resume+0x65/0xc0
[11888.608320]  [<c13d747f>] usb_dev_complete+0xf/0x20
[11888.608323]  [<c1365242>] device_complete.isra.4+0x32/0x80
[11888.608325]  [<c13656b5>] dpm_complete+0x75/0xd0
[11888.608328]  [<c1365727>] dpm_resume_end+0x17/0x20
[11888.608331]  [<c108d7a0>] suspend_devices_and_enter+0xb0/0x180
[11888.608334]  [<c108d96e>] enter_state+0xfe/0x130
[11888.608337]  [<c108ceba>] state_store+0x8a/0xc0
[11888.608340]  [<c108ce30>] ? pm_trace_dev_match_show+0x20/0x20
[11888.608343]  [<c128a3db>] kobj_attr_store+0x1b/0x30
[11888.608347]  [<c11903b6>] sysfs_write_file+0xa6/0x100
[11888.608351]  [<c113374f>] vfs_write+0x8f/0x160
[11888.608353]  [<c1190310>] ? sysfs_poll+0x80/0x80
[11888.608355]  [<c1133a2d>] sys_write+0x3d/0x70
[11888.608359]  [<c155c61f>] sysenter_do_call+0x12/0x28
[11888.608360] ---[ end trace d597eb65e50ed02f ]---
[11888.608363] usb 1-2.2: firmware: xc3028L-v36.fw will not be loaded
[11888.608365] xc2028 3-0061: Error -16 while requesting firmware xc3028L-v36.fw 
[11888.608368] ------------[ cut here ]------------
[11888.608370] WARNING: at /build/buildd/linux-3.0.0/drivers/base/firmware_class.c:524 _request_firmware+0x1f1/0x220()
[11888.608372] Hardware name: EP41-UD3L
[11888.608373] Modules linked in: rc_nec_terratec_cinergy_xs tuner_xc2028 tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder tm6000(C) ir_rc6_decoder ir_rc5_decoder ir_nec_decoder videobuf_vmalloc videobuf_core rc_core v4l2_common snd_hrtimer bnep rfcomm nfsd lockd nfs_acl auth_rpcgss sunrpc vesafb binfmt_misc gspca_spca561 gspca_main snd_hda_codec_realtek ppdev snd_hda_intel snd_hda_codec snd_hwdep videodev nvidia(P) snd_pcm snd_seq_midi snd_rawmidi usbhid hid snd_seq_midi_event psmouse serio_raw btusb snd_seq parport_pc bluetooth snd_timer snd_seq_device snd soundcore snd_page_alloc lp parport usb_storage uas r8169
[11888.608402] Pid: 5662, comm: pm-suspend Tainted: P        WC  3.0.0-12-generic-pae #20-Ubuntu
[11888.608404] Call Trace:
[11888.608406]  [<c15414ca>] ? printk+0x2d/0x2f
[11888.608409]  [<c1050312>] warn_slowpath_common+0x72/0xa0
[11888.608412]  [<c1369b01>] ? _request_firmware+0x1f1/0x220
[11888.608415]  [<c1369b01>] ? _request_firmware+0x1f1/0x220
[11888.608417]  [<c1050362>] warn_slowpath_null+0x22/0x30
[11888.608420]  [<c1369b01>] _request_firmware+0x1f1/0x220
[11888.608423]  [<c1369bcf>] request_firmware+0x1f/0x30
[11888.608426]  [<f8f65641>] load_all_firmwares.isra.7+0x61/0x6c0 [tuner_xc2028]
[11888.608429]  [<c1290051>] ? format_decode+0x311/0x380
[11888.608432]  [<c102da88>] ? default_spin_lock_flags+0x8/0x10
[11888.608434]  [<c15555fd>] ? _raw_spin_lock_irqsave+0x2d/0x40
[11888.608437]  [<c107480a>] ? up+0x2a/0x40
[11888.608440]  [<f8f666f9>] ? check_firmware+0x599/0x930 [tuner_xc2028]
[11888.608442]  [<c128fbb5>] ? put_dec+0x85/0x90
[11888.608446]  [<f8f666f9>] check_firmware+0x599/0x930 [tuner_xc2028]
[11888.608449]  [<c100fdf8>] ? sched_clock+0x8/0x10
[11888.608452]  [<f8f66c97>] ? generic_set_freq+0x207/0x540 [tuner_xc2028]
[11888.608455]  [<c102da88>] ? default_spin_lock_flags+0x8/0x10
[11888.608458]  [<f8f66afe>] generic_set_freq+0x6e/0x540 [tuner_xc2028]
[11888.608461]  [<f8f6707b>] xc2028_set_analog_freq+0xab/0x220 [tuner_xc2028]
[11888.608465]  [<f8f537ee>] fe_set_params+0x1e/0x60 [tuner]
[11888.608468]  [<f8f54b14>] ? tuner_s_config+0x34/0x80 [tuner]
[11888.608471]  [<f8f5332b>] set_tv_freq+0xab/0x1f0 [tuner]
[11888.608474]  [<f8f53498>] ? set_freq+0x28/0x50 [tuner]
[11888.608476]  [<f8f53498>] set_freq+0x28/0x50 [tuner]
[11888.608479]  [<f8f54dd1>] tuner_s_frequency+0x31/0x40 [tuner]
[11888.608483]  [<f8f31668>] tm6000_init_dev+0x118/0x1f0 [tm6000]
[11888.608487]  [<f8f318fa>] tm6000_usb_probe+0x1ba/0x450 [tm6000]
[11888.608491]  [<c13e342c>] usb_probe_interface+0xac/0x1a0
[11888.608494]  [<c135f1ad>] really_probe+0x4d/0x150
[11888.608497]  [<c13675b9>] ? pm_runtime_barrier+0x49/0xb0
[11888.608499]  [<c135f3ea>] driver_probe_device+0x3a/0x60
[11888.608502]  [<c135f4f1>] __device_attach+0x41/0x50
[11888.608504]  [<c135f4b0>] ? __driver_attach+0xa0/0xa0
[11888.608506]  [<c135e279>] bus_for_each_drv+0x49/0x70
[11888.608509]  [<c135f37a>] device_attach+0x8a/0xa0
[11888.608511]  [<c135f4b0>] ? __driver_attach+0xa0/0xa0
[11888.608514]  [<c13e312e>] usb_rebind_intf+0x3e/0x60
[11888.608516]  [<c15414ca>] ? printk+0x2d/0x2f
[11888.608519]  [<c13e31c8>] do_unbind_rebind.isra.10+0x58/0x80
[11888.608521]  [<c13e3255>] usb_resume+0x65/0xc0
[11888.608524]  [<c13d747f>] usb_dev_complete+0xf/0x20
[11888.608527]  [<c1365242>] device_complete.isra.4+0x32/0x80
[11888.608529]  [<c13656b5>] dpm_complete+0x75/0xd0
[11888.608531]  [<c1365727>] dpm_resume_end+0x17/0x20
[11888.608535]  [<c108d7a0>] suspend_devices_and_enter+0xb0/0x180
[11888.608537]  [<c108d96e>] enter_state+0xfe/0x130
[11888.608540]  [<c108ceba>] state_store+0x8a/0xc0
[11888.608543]  [<c108ce30>] ? pm_trace_dev_match_show+0x20/0x20
[11888.608546]  [<c128a3db>] kobj_attr_store+0x1b/0x30
[11888.608548]  [<c11903b6>] sysfs_write_file+0xa6/0x100
[11888.608551]  [<c113374f>] vfs_write+0x8f/0x160
[11888.608554]  [<c1190310>] ? sysfs_poll+0x80/0x80
[11888.608556]  [<c1133a2d>] sys_write+0x3d/0x70
[11888.608559]  [<c155c61f>] sysenter_do_call+0x12/0x28
[11888.608561] ---[ end trace d597eb65e50ed030 ]---
[11888.608562] usb 1-2.2: firmware: xc3028L-v36.fw will not be loaded
[11888.608565] xc2028 3-0061: Error -16 while requesting firmware xc3028L-v36.fw 
[11888.608627] tm6000 #1: registered device video1
[11888.608629] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[11888.724108] Registered IR keymap rc-nec-terratec-cinergy-xs
[11888.724211] input: tm5600/60x0 IR (tm6000 #1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc1/input8
[11888.724253] rc1: tm5600/60x0 IR (tm6000 #1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc1
[11888.936336] PM: resume devices took 11.000 seconds
[11888.936338] ------------[ cut here ]------------
[11888.936342] WARNING: at /build/buildd/linux-3.0.0/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()
[11888.936344] Hardware name: EP41-UD3L
[11888.936345] Component: resume devices, time: 11000
[11888.936347] Modules linked in: rc_nec_terratec_cinergy_xs tuner_xc2028 tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder tm6000(C) ir_rc6_decoder ir_rc5_decoder ir_nec_decoder videobuf_vmalloc videobuf_core rc_core v4l2_common snd_hrtimer bnep rfcomm nfsd lockd nfs_acl auth_rpcgss sunrpc vesafb binfmt_misc gspca_spca561 gspca_main snd_hda_codec_realtek ppdev snd_hda_intel snd_hda_codec snd_hwdep videodev nvidia(P) snd_pcm snd_seq_midi snd_rawmidi usbhid hid snd_seq_midi_event psmouse serio_raw btusb snd_seq parport_pc bluetooth snd_timer snd_seq_device snd soundcore snd_page_alloc lp parport usb_storage uas r8169
[11888.936378] Pid: 5662, comm: pm-suspend Tainted: P        WC  3.0.0-12-generic-pae #20-Ubuntu
[11888.936379] Call Trace:
[11888.936383]  [<c1050312>] warn_slowpath_common+0x72/0xa0
[11888.936386]  [<c108da69>] ? suspend_test_finish+0x89/0x90
[11888.936389]  [<c108da69>] ? suspend_test_finish+0x89/0x90
[11888.936392]  [<c10503e3>] warn_slowpath_fmt+0x33/0x40
[11888.936395]  [<c108da69>] suspend_test_finish+0x89/0x90
[11888.936398]  [<c108d7aa>] suspend_devices_and_enter+0xba/0x180
[11888.936400]  [<c108d96e>] enter_state+0xfe/0x130
[11888.936403]  [<c108ceba>] state_store+0x8a/0xc0
[11888.936406]  [<c108ce30>] ? pm_trace_dev_match_show+0x20/0x20
[11888.936409]  [<c128a3db>] kobj_attr_store+0x1b/0x30
[11888.936412]  [<c11903b6>] sysfs_write_file+0xa6/0x100
[11888.936415]  [<c113374f>] vfs_write+0x8f/0x160
[11888.936418]  [<c1190310>] ? sysfs_poll+0x80/0x80
[11888.936420]  [<c1133a2d>] sys_write+0x3d/0x70
[11888.936423]  [<c155c61f>] sysenter_do_call+0x12/0x28
[11888.936425] ---[ end trace d597eb65e50ed031 ]---
[11888.936488] PM: Finishing wakeup.
[11888.936490] Restarting tasks ... done.
[11889.348147] tm6000: open called (dev=video1)
[11889.443751] xc2028 3-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[11889.944135] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[11890.394959] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[11890.421709] r8169 0000:03:00.0: eth0: link down
[11890.421715] r8169 0000:03:00.0: eth0: link down
[11890.422130] ADDRCONF(NETDEV_UP): eth0: link is not ready
[11891.962266] r8169 0000:03:00.0: eth0: link up
[11892.380689] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[11902.800012] eth0: no IPv6 routers present
[11944.900023] xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
[11945.824023] SCODE (20000000), id 000000000000b700:
[11945.824031] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.

Hoffe das enthält noch weitere Informationen.

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

[11888.608363] usb 1-2.2: firmware: xc3028L-v36.fw will not be loaded
[11888.608365] xc2028 3-0061: Error -16 while requesting firmware xc3028L-v36.fw 

Gibt Probleme beim Laden der Firmware. Ist die Firmware xc3028L-v36.fw unter /lib/firmware vorhanden ?

Für den Trident-Chip gibt es lt. linuxtv.org 🇬🇧 noch zwei zusätzliche Kernelmodule, die nicht automatisch mit dem Modul tm6000 mitgeladen werden:

sudo modprobe -v tm6000_alsa
sudo modprobe -v tm6000_dvb

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

Firmware ist da.

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130

niels.b schrieb:

Firmware ist da.

Ändern diese zwei Befehle etwas an der Ausgabe von dmesg ?

sudo modprobe -v tm6000_alsa
sudo modprobe -v tm6000_dvb

niels.b

(Themenstarter)

Anmeldungsdatum:
29. September 2011

Beiträge: 37

ja

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
[   67.364497] i2c-core: driver [tuner] using legacy suspend method
[   67.364500] i2c-core: driver [tuner] using legacy resume method
[   67.364633] tuner 3-0061: Tuner -1 found with type(s) Radio TV.
[   67.385853] xc2028 3-0061: creating new instance
[   67.385857] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[   67.385860] Setting firmware parameters for xc2028
[   67.429646] xc2028 3-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[   67.672019] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  122.532023] xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
[  123.464032] SCODE (20000000), id 000000000000b700:
[  123.464039] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[  124.492132] tm6000 #0: registered device video1
[  124.492136] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[  124.648035] Registered IR keymap rc-nec-terratec-cinergy-xs
[  124.648148] input: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc0/input7
[  124.648222] rc0: tm5600/60x0 IR (tm6000 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/rc/rc0
[  124.860035] tm6000: open called (dev=video1)
[  124.860066] usbcore: registered new interface driver tm6000
[  124.876240] tm6000_alsa: module is from the staging directory, the quality is unknown, you have been warned.
[  124.876782] tm6000 #0: Initialized (TM6000 Audio Extension) extension
[  124.948688] tm6000_dvb: module is from the staging directory, the quality is unknown, you have been warned.
[  124.988035] DVB: registering new adapter (Trident TVMaster 6000 DVB-T)
[  124.988042] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[  124.988160] xc2028 3-0061: attaching existing instance
[  124.988164] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[  124.988166] tm6000: XC2028/3028 asked to be attached to frontend!
[  124.988290] tm6000 #0: Initialized (TM6000 dvb Extension) extension
[  147.500018] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  175.675022] tm6000: open called (dev=video1)
[  202.460026] xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  203.340025] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[  204.124561] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  258.980037] xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
[  259.904028] SCODE (20000000), id 000000000000b700:
[  259.904036] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[  261.980036] tm6000: open called (dev=video1)
[  262.284018] xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  317.296032] xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700.
[  318.220021] SCODE (20000000), id 000000000000b700:
[  318.220028] xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[  319.044023] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  373.968029] xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  374.848035] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[  375.116024] xc2028 3-0061: Incorrect readback of firmware version.
[  375.416037] xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  430.356020] xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  431.236021] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[  458.868019] xc2028 3-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[  459.748021] xc2028 3-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000.
[  464.068091] tm6000: got start feed request tm6000_start_feed
[  464.068095] tm6000: got start stream request tm6000_start_stream
[  464.152343] tm6000: pipe resetted
[  464.152381] tm6000: got start feed request tm6000_start_feed
[  469.156115] tm6000: got stop feed request tm6000_stop_feed
[  469.156120] stream 0x2
[  469.156141] tm6000: got stop feed request tm6000_stop_feed
[  469.156144] stream 0x1
[  469.156145] stop stream
[  469.156147] urb killing
[  469.156219] urb buffer free
[  477.068074] tm6000: got start feed request tm6000_start_feed
[  477.068079] tm6000: got start stream request tm6000_start_stream
[  477.068470] tm6000: pipe resetted
[  477.068484] tm6000: got start feed request tm6000_start_feed
[  482.073572] tm6000: got stop feed request tm6000_stop_feed
[  482.073577] stream 0x2
[  482.073601] tm6000: got stop feed request tm6000_stop_feed
[  482.073603] stream 0x1
[  482.073605] stop stream
[  482.073606] urb killing
[  482.073721] urb buffer free
[  493.420068] tm6000: got start feed request tm6000_start_feed
[  493.420073] tm6000: got start stream request tm6000_start_stream
[  493.420347] tm6000: pipe resetted
[  493.420362] tm6000: got start feed request tm6000_start_feed
[  498.424084] tm6000: got stop feed request tm6000_stop_feed
[  498.424089] stream 0x2
[  498.424115] tm6000: got stop feed request tm6000_stop_feed
[  498.424117] stream 0x1
[  498.424119] stop stream
[  498.424120] urb killing
[  498.424226] urb buffer free
[  516.652072] tm6000: got start feed request tm6000_start_feed
[  516.652077] tm6000: got start stream request tm6000_start_stream
[  516.652477] tm6000: pipe resetted
[  516.652492] tm6000: got start feed request tm6000_start_feed
[  521.656085] tm6000: got stop feed request tm6000_stop_feed
[  521.656090] stream 0x2
[  521.656112] tm6000: got stop feed request tm6000_stop_feed
[  521.656114] stream 0x1
[  521.656116] stop stream
[  521.656118] urb killing
[  521.656230] urb buffer free
[  553.652079] tm6000: got start feed request tm6000_start_feed
[  553.652084] tm6000: got start stream request tm6000_start_stream
[  553.652485] tm6000: pipe resetted
[  553.652500] tm6000: got start feed request tm6000_start_feed
[  558.657581] tm6000: got stop feed request tm6000_stop_feed
[  558.657585] stream 0x2
[  558.657609] tm6000: got stop feed request tm6000_stop_feed
[  558.657611] stream 0x1
[  558.657613] stop stream
[  558.657614] urb killing
[  558.657737] urb buffer free
[  566.572064] tm6000: got start feed request tm6000_start_feed
[  566.572068] tm6000: got start stream request tm6000_start_stream
[  566.572363] tm6000: pipe resetted
[  566.572377] tm6000: got start feed request tm6000_start_feed
[  571.576082] tm6000: got stop feed request tm6000_stop_feed
[  571.576088] stream 0x2
[  571.576110] tm6000: got stop feed request tm6000_stop_feed
[  571.576113] stream 0x1
[  571.576114] stop stream
[  571.576116] urb killing
[  571.576240] urb buffer free
[  582.924073] tm6000: got start feed request tm6000_start_feed
[  582.924078] tm6000: got start stream request tm6000_start_stream
[  582.924366] tm6000: pipe resetted
[  582.924382] tm6000: got start feed request tm6000_start_feed
[  587.928107] tm6000: got stop feed request tm6000_stop_feed
[  587.928112] stream 0x2
[  587.928135] tm6000: got stop feed request tm6000_stop_feed
[  587.928138] stream 0x1
[  587.928139] stop stream
[  587.928141] urb killing
[  587.928244] urb buffer free
[  595.848078] tm6000: got start feed request tm6000_start_feed
[  595.848084] tm6000: got start stream request tm6000_start_stream
[  595.848374] tm6000: pipe resetted
[  595.848394] tm6000: got start feed request tm6000_start_feed
[  600.853465] tm6000: got stop feed request tm6000_stop_feed
[  600.853470] stream 0x2
[  600.853493] tm6000: got stop feed request tm6000_stop_feed
[  600.853495] stream 0x1
[  600.853497] stop stream
[  600.853498] urb killing
[  600.853620] urb buffer free
[  605.336074] tm6000: got start feed request tm6000_start_feed
[  605.336079] tm6000: got start stream request tm6000_start_stream
[  605.336495] tm6000: pipe resetted
[  605.336509] tm6000: got start feed request tm6000_start_feed
[  610.340085] tm6000: got stop feed request tm6000_stop_feed
[  610.340090] stream 0x2
[  610.340112] tm6000: got stop feed request tm6000_stop_feed
[  610.340114] stream 0x1
[  610.340116] stop stream
[  610.340118] urb killing
[  610.340247] urb buffer free
[  700.772070] tm6000: got start feed request tm6000_start_feed
[  700.772074] tm6000: got start stream request tm6000_start_stream
[  700.772389] tm6000: pipe resetted
[  700.772404] tm6000: got start feed request tm6000_start_feed
[  705.776094] tm6000: got stop feed request tm6000_stop_feed
[  705.776099] stream 0x2
[  705.776122] tm6000: got stop feed request tm6000_stop_feed
[  705.776125] stream 0x1
[  705.776126] stop stream
[  705.776128] urb killing
[  705.776265] urb buffer free
[  706.676074] tm6000: got start feed request tm6000_start_feed
[  706.676079] tm6000: got start stream request tm6000_start_stream
[  706.676390] tm6000: pipe resetted
[  706.676404] tm6000: got start feed request tm6000_start_feed
[  711.686517] tm6000: got stop feed request tm6000_stop_feed
[  711.686522] stream 0x2
[  711.686547] tm6000: got stop feed request tm6000_stop_feed
[  711.686549] stream 0x1
[  711.686551] stop stream
[  711.686552] urb killing
[  711.688510] urb buffer free
[  719.336088] tm6000: got start feed request tm6000_start_feed
[  719.336093] tm6000: got start stream request tm6000_start_stream
[  719.336520] tm6000: pipe resetted
[  719.336540] tm6000: got start feed request tm6000_start_feed
[  724.340083] tm6000: got stop feed request tm6000_stop_feed
[  724.340088] stream 0x2
[  724.340111] tm6000: got stop feed request tm6000_stop_feed
[  724.340114] stream 0x1
[  724.340115] stop stream
[  724.340117] urb killing
[  724.340268] urb buffer free
[  735.556090] tm6000: got start feed request tm6000_start_feed
[  735.556095] tm6000: got start stream request tm6000_start_stream
[  735.556398] tm6000: pipe resetted
[  735.556417] tm6000: got start feed request tm6000_start_feed
[  740.560088] tm6000: got stop feed request tm6000_stop_feed
[  740.560093] stream 0x2
[  740.560116] tm6000: got stop feed request tm6000_stop_feed
[  740.560119] stream 0x1
[  740.560120] stop stream
[  740.560122] urb killing
[  740.560273] urb buffer free
[  749.164176] tm6000: got start feed request tm6000_start_feed
[  749.164181] tm6000: got start stream request tm6000_start_stream
[  749.164525] tm6000: pipe resetted
[  749.164541] tm6000: got start feed request tm6000_start_feed
[  754.169628] tm6000: got stop feed request tm6000_stop_feed
[  754.169632] stream 0x2
[  754.169654] tm6000: got stop feed request tm6000_stop_feed
[  754.169656] stream 0x1
[  754.169658] stop stream
[  754.169660] urb killing
[  754.169773] urb buffer free

edit: Ich hab einfach mal w_scan laufen lassen, das hat schon eine positive Rückmeldung gegeben.

Antworten |